Fixing exhaust lead

Reply Subscribe

Thread Tools

Search this Thread

Mar 16, 2007 | 01:16 PM

#31

nrs

Guest

Posts: n/a

Re: Fixing exhaust lead

On Mar 15, 8:01 pm, "L.W. $Bill$ ------ III" <billhug...@***.net>
wrote:
> In case you need the exhaust manifold:http://www.1aauto.com/1A/ExhaustManifolds/Jeep/Wrangler
> God Bless America, Bill 0|||||||0
> mailto:LW------...@aol.comhttp://www.----------.com/
>
> "nrs" <neale...@yahoo.com> wrote in message
>
> news:1174001143.499708.185750@y66g2000hsf.googlegr oups.com...
> On 15 mar, 17:28, c <c...@me.org> wrote:
>
>
>
>
>
> > nrs wrote:
> > > On 15 mar, 08:59, "nrs" <neale...@yahoo.com> wrote:
> > >> The rearmost stud is broken on my 2.5 4cyl (95 YJ) and it has an
> > >> exhaust leak. It was this way when I bought it so I have no idea how
> > >> long it has gone like this. Yesterday I took it to a mechanic and he
> > >> said that he could just remove the manifolds and broken stud and put
> > >> in a new gasket but that there is only a 50% chance it will seal
> > >> properly. He said the sure fix is to mill the exhaust manifold and
> > >> mating surface on the head, stating that the exhaust leak could have
> > >> erroded the mating surfaces.
>
> > >> Does this sound reasonable?
>
> > >> Also, would the intake manifold also have to be milled to keep it at
> > >> the same thickness? I worry about this because some of the fasterners
> > >> are used to hold both manifolds in place.
>
> > >> Thanks
>
> > > Any advice would be appreciated. I´m sure some of you have dealt with
> > > this before. Thanks
>
> > I have seen manifolds erode or pit very badly if a leak is left unfixed
> > for a long enough time, so yes it is possible. If you trust your
> > mechanic, then take his advice. There are many good mechanics out there,
> > and there are also a lot of shady ones.
>
> > Chris- Ocultar texto de la cita -
>
> > - Mostrar texto de la cita -
>
> Thanks to all who replied. This mechanic is highly recommended by the
> local jeepers so I would tend to trust him. I was starting to doubt
> since milling seemed extreme to me. However, based on your comments
> it seems he was just letting me know the worst case scenario. I'm
> thinking if it needs milling, I would rather get headers or a new
> manifold and mill only on the head to avoid mismatching the intake and
> exhaust manifold thicknesses.
>
> Thanks
>
> --
> Posted via a free Usenet account fromhttp://www.teranews.com- Hide quotedtext -
>
> - Show quoted text -

Thanks for the link. I am also seeing some 2.5 exhaust manifolds on
eBay for around $40.00.