First mods to my new Rubi
#21
Guest
Posts: n/a
Re: First mods to my new Rubi
I thought I was posting in both, or at least that's what my newsreader
says. Thanks Mike!
Mike Romain wrote:
>Just a heads up for you, you are posting in HTML that a lot of folks on
>this group can't read. Lots of folks are on mainframes or on other than
>microcrap systems and can only read text. You could be missing a lot of
>opinions...
>
>Mike
>86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
>88 Cherokee 235 BFG AT's
>
>
>
>>me wrote:
>>
>>No Sentry key. I almost ordered it, then I realized what a headache
>>that may cause for the remote start. My current alarm has a zone
>>sensor. If you get too close the first zone chirps you a warning. If
>>you get in the Jeep (like when you have the doors off) the second zone
>>trips the alarm. It's a really nice setup, I just wish I could get my
>>hands on that harness for the starter so I don't have to go cutting
>>ignition wires again. Although, having done it once already I would
>>have a model to look at while I do the new one. ;-)
>>
>>Valued User wrote:
>>
>>
>>
>>>Will your Rubi have a Sentry key engine immobilizer? If so then I've
>>>read
>>>that you may have to make your alarm play with it in order to make
>>>it work.
>>>
>>>Let me know what you find - I'm definately interested in putting an
>>>alarm
>>>with a proximity sensor in my new TJ (will be ordered on Monday).
>>>
>>>"me" <noone@anywhere.com> wrote in message
>>>news:jDNAb.25072$dr1.4147341@news4.srv.hcvlny.c v.net...
>>>
>>>
>>>
>>>
>>>>Having owned a TJ for 6 yrs now, I know there are some things I
>>>>want to
>>>>do right away, and other things I want to do even sooner than
>>>>that.
>>>>But, there are some things that I am not sure about.
>>>>
>>>>First off, I should be picking it up on Tuesday. Do I want to
>>>>take it
>>>>somewhere to have it undercoated?? If so, is there a specific
>>>>company
>>>>(like Ziebart) in the NJ area that I would be best using?
>>>>
>>>>Second, is there some type of interior coating (under the
>>>>carpeting)
>>>>that helps to insulate against road noise?? Not so much for me,
>>>>but the
>>>>wife. We drive everywhere for vacation and she has trouble
>>>>sleeping
>>>>with all the road noise from the MT/Rs on my Sport. So, I figured
>>>>before I start running CB cables and such it might be best to do
>>>>some
>>>>noise damping first, if such a thing exists.
>>>>
>>>>Third, alarm systems. I have one in my Sport now, even has a
>>>>remote
>>>>start module. I got the alarm from Crutchfield with the nice plug
>>>>and
>>>>play harness. But when I called Crutchfield regarding the remote
>>>>starter (3 years after the initial alarm install), they had
>>>>stopped
>>>>carrying it because so many people had trouble installing it. So,
>>>>I was
>>>>forced to order one from my local stereo shop, and then left to
>>>>splice
>>>>away since they didn't offer the nice plug and play harness like
>>>>Crutchfield used to. I guess my question is does anyone have a
>>>>recommendation for an alarm with a remote start that offers a plug
>>>>and
>>>>play harness?. I hate cutting into the ignition wires and such if
>>>>it's
>>>>not absolutely necessary.
>>>>
>>>>That's all for now, though I am sure there will be more real soon!
>>>>
>>>>TIA,
>>>>
>>>>Jay
>>>>
>>>>
>>>>
>>>>
>>>>
>>>
>>>
>>>
says. Thanks Mike!
Mike Romain wrote:
>Just a heads up for you, you are posting in HTML that a lot of folks on
>this group can't read. Lots of folks are on mainframes or on other than
>microcrap systems and can only read text. You could be missing a lot of
>opinions...
>
>Mike
>86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
>88 Cherokee 235 BFG AT's
>
>
>
>>me wrote:
>>
>>No Sentry key. I almost ordered it, then I realized what a headache
>>that may cause for the remote start. My current alarm has a zone
>>sensor. If you get too close the first zone chirps you a warning. If
>>you get in the Jeep (like when you have the doors off) the second zone
>>trips the alarm. It's a really nice setup, I just wish I could get my
>>hands on that harness for the starter so I don't have to go cutting
>>ignition wires again. Although, having done it once already I would
>>have a model to look at while I do the new one. ;-)
>>
>>Valued User wrote:
>>
>>
>>
>>>Will your Rubi have a Sentry key engine immobilizer? If so then I've
>>>read
>>>that you may have to make your alarm play with it in order to make
>>>it work.
>>>
>>>Let me know what you find - I'm definately interested in putting an
>>>alarm
>>>with a proximity sensor in my new TJ (will be ordered on Monday).
>>>
>>>"me" <noone@anywhere.com> wrote in message
>>>news:jDNAb.25072$dr1.4147341@news4.srv.hcvlny.c v.net...
>>>
>>>
>>>
>>>
>>>>Having owned a TJ for 6 yrs now, I know there are some things I
>>>>want to
>>>>do right away, and other things I want to do even sooner than
>>>>that.
>>>>But, there are some things that I am not sure about.
>>>>
>>>>First off, I should be picking it up on Tuesday. Do I want to
>>>>take it
>>>>somewhere to have it undercoated?? If so, is there a specific
>>>>company
>>>>(like Ziebart) in the NJ area that I would be best using?
>>>>
>>>>Second, is there some type of interior coating (under the
>>>>carpeting)
>>>>that helps to insulate against road noise?? Not so much for me,
>>>>but the
>>>>wife. We drive everywhere for vacation and she has trouble
>>>>sleeping
>>>>with all the road noise from the MT/Rs on my Sport. So, I figured
>>>>before I start running CB cables and such it might be best to do
>>>>some
>>>>noise damping first, if such a thing exists.
>>>>
>>>>Third, alarm systems. I have one in my Sport now, even has a
>>>>remote
>>>>start module. I got the alarm from Crutchfield with the nice plug
>>>>and
>>>>play harness. But when I called Crutchfield regarding the remote
>>>>starter (3 years after the initial alarm install), they had
>>>>stopped
>>>>carrying it because so many people had trouble installing it. So,
>>>>I was
>>>>forced to order one from my local stereo shop, and then left to
>>>>splice
>>>>away since they didn't offer the nice plug and play harness like
>>>>Crutchfield used to. I guess my question is does anyone have a
>>>>recommendation for an alarm with a remote start that offers a plug
>>>>and
>>>>play harness?. I hate cutting into the ignition wires and such if
>>>>it's
>>>>not absolutely necessary.
>>>>
>>>>That's all for now, though I am sure there will be more real soon!
>>>>
>>>>TIA,
>>>>
>>>>Jay
>>>>
>>>>
>>>>
>>>>
>>>>
>>>
>>>
>>>
#22
Guest
Posts: n/a
Re: First mods to my new Rubi
I thought I was posting in both, or at least that's what my newsreader
says. Thanks Mike!
Mike Romain wrote:
>Just a heads up for you, you are posting in HTML that a lot of folks on
>this group can't read. Lots of folks are on mainframes or on other than
>microcrap systems and can only read text. You could be missing a lot of
>opinions...
>
>Mike
>86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
>88 Cherokee 235 BFG AT's
>
>
>
>>me wrote:
>>
>>No Sentry key. I almost ordered it, then I realized what a headache
>>that may cause for the remote start. My current alarm has a zone
>>sensor. If you get too close the first zone chirps you a warning. If
>>you get in the Jeep (like when you have the doors off) the second zone
>>trips the alarm. It's a really nice setup, I just wish I could get my
>>hands on that harness for the starter so I don't have to go cutting
>>ignition wires again. Although, having done it once already I would
>>have a model to look at while I do the new one. ;-)
>>
>>Valued User wrote:
>>
>>
>>
>>>Will your Rubi have a Sentry key engine immobilizer? If so then I've
>>>read
>>>that you may have to make your alarm play with it in order to make
>>>it work.
>>>
>>>Let me know what you find - I'm definately interested in putting an
>>>alarm
>>>with a proximity sensor in my new TJ (will be ordered on Monday).
>>>
>>>"me" <noone@anywhere.com> wrote in message
>>>news:jDNAb.25072$dr1.4147341@news4.srv.hcvlny.c v.net...
>>>
>>>
>>>
>>>
>>>>Having owned a TJ for 6 yrs now, I know there are some things I
>>>>want to
>>>>do right away, and other things I want to do even sooner than
>>>>that.
>>>>But, there are some things that I am not sure about.
>>>>
>>>>First off, I should be picking it up on Tuesday. Do I want to
>>>>take it
>>>>somewhere to have it undercoated?? If so, is there a specific
>>>>company
>>>>(like Ziebart) in the NJ area that I would be best using?
>>>>
>>>>Second, is there some type of interior coating (under the
>>>>carpeting)
>>>>that helps to insulate against road noise?? Not so much for me,
>>>>but the
>>>>wife. We drive everywhere for vacation and she has trouble
>>>>sleeping
>>>>with all the road noise from the MT/Rs on my Sport. So, I figured
>>>>before I start running CB cables and such it might be best to do
>>>>some
>>>>noise damping first, if such a thing exists.
>>>>
>>>>Third, alarm systems. I have one in my Sport now, even has a
>>>>remote
>>>>start module. I got the alarm from Crutchfield with the nice plug
>>>>and
>>>>play harness. But when I called Crutchfield regarding the remote
>>>>starter (3 years after the initial alarm install), they had
>>>>stopped
>>>>carrying it because so many people had trouble installing it. So,
>>>>I was
>>>>forced to order one from my local stereo shop, and then left to
>>>>splice
>>>>away since they didn't offer the nice plug and play harness like
>>>>Crutchfield used to. I guess my question is does anyone have a
>>>>recommendation for an alarm with a remote start that offers a plug
>>>>and
>>>>play harness?. I hate cutting into the ignition wires and such if
>>>>it's
>>>>not absolutely necessary.
>>>>
>>>>That's all for now, though I am sure there will be more real soon!
>>>>
>>>>TIA,
>>>>
>>>>Jay
>>>>
>>>>
>>>>
>>>>
>>>>
>>>
>>>
>>>
says. Thanks Mike!
Mike Romain wrote:
>Just a heads up for you, you are posting in HTML that a lot of folks on
>this group can't read. Lots of folks are on mainframes or on other than
>microcrap systems and can only read text. You could be missing a lot of
>opinions...
>
>Mike
>86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
>88 Cherokee 235 BFG AT's
>
>
>
>>me wrote:
>>
>>No Sentry key. I almost ordered it, then I realized what a headache
>>that may cause for the remote start. My current alarm has a zone
>>sensor. If you get too close the first zone chirps you a warning. If
>>you get in the Jeep (like when you have the doors off) the second zone
>>trips the alarm. It's a really nice setup, I just wish I could get my
>>hands on that harness for the starter so I don't have to go cutting
>>ignition wires again. Although, having done it once already I would
>>have a model to look at while I do the new one. ;-)
>>
>>Valued User wrote:
>>
>>
>>
>>>Will your Rubi have a Sentry key engine immobilizer? If so then I've
>>>read
>>>that you may have to make your alarm play with it in order to make
>>>it work.
>>>
>>>Let me know what you find - I'm definately interested in putting an
>>>alarm
>>>with a proximity sensor in my new TJ (will be ordered on Monday).
>>>
>>>"me" <noone@anywhere.com> wrote in message
>>>news:jDNAb.25072$dr1.4147341@news4.srv.hcvlny.c v.net...
>>>
>>>
>>>
>>>
>>>>Having owned a TJ for 6 yrs now, I know there are some things I
>>>>want to
>>>>do right away, and other things I want to do even sooner than
>>>>that.
>>>>But, there are some things that I am not sure about.
>>>>
>>>>First off, I should be picking it up on Tuesday. Do I want to
>>>>take it
>>>>somewhere to have it undercoated?? If so, is there a specific
>>>>company
>>>>(like Ziebart) in the NJ area that I would be best using?
>>>>
>>>>Second, is there some type of interior coating (under the
>>>>carpeting)
>>>>that helps to insulate against road noise?? Not so much for me,
>>>>but the
>>>>wife. We drive everywhere for vacation and she has trouble
>>>>sleeping
>>>>with all the road noise from the MT/Rs on my Sport. So, I figured
>>>>before I start running CB cables and such it might be best to do
>>>>some
>>>>noise damping first, if such a thing exists.
>>>>
>>>>Third, alarm systems. I have one in my Sport now, even has a
>>>>remote
>>>>start module. I got the alarm from Crutchfield with the nice plug
>>>>and
>>>>play harness. But when I called Crutchfield regarding the remote
>>>>starter (3 years after the initial alarm install), they had
>>>>stopped
>>>>carrying it because so many people had trouble installing it. So,
>>>>I was
>>>>forced to order one from my local stereo shop, and then left to
>>>>splice
>>>>away since they didn't offer the nice plug and play harness like
>>>>Crutchfield used to. I guess my question is does anyone have a
>>>>recommendation for an alarm with a remote start that offers a plug
>>>>and
>>>>play harness?. I hate cutting into the ignition wires and such if
>>>>it's
>>>>not absolutely necessary.
>>>>
>>>>That's all for now, though I am sure there will be more real soon!
>>>>
>>>>TIA,
>>>>
>>>>Jay
>>>>
>>>>
>>>>
>>>>
>>>>
>>>
>>>
>>>
#23
Guest
Posts: n/a
Re: First mods to my new Rubi
"me" <noone@anywhere.com> wrote in message
news:jDNAb.25072$dr1.4147341@news4.srv.hcvlny.cv.n et...
> Having owned a TJ for 6 yrs now, I know there are some things I want to
> do right away, and other things I want to do even sooner than that.
> But, there are some things that I am not sure about.
>
> First off, I should be picking it up on Tuesday. Do I want to take it
> somewhere to have it undercoated?? If so, is there a specific company
> (like Ziebart) in the NJ area that I would be best using?
>
If you lived outside of the snowbelt, I would suggest taking a bye on the
undercoating. It isn't needed. Having said that, I have no idea what the
salt does.
> Second, is there some type of interior coating (under the carpeting)
> that helps to insulate against road noise?? Not so much for me, but the
> wife. We drive everywhere for vacation and she has trouble sleeping
> with all the road noise from the MT/Rs on my Sport. So, I figured
> before I start running CB cables and such it might be best to do some
> noise damping first, if such a thing exists.
>
There is nothing from the factory, but I am sure you can find something if
you look long enough.
> Third, alarm systems. I have one in my Sport now, even has a remote
> start module. I got the alarm from Crutchfield with the nice plug and
> play harness. But when I called Crutchfield regarding the remote
> starter (3 years after the initial alarm install), they had stopped
> carrying it because so many people had trouble installing it. So, I was
> forced to order one from my local stereo shop, and then left to splice
> away since they didn't offer the nice plug and play harness like
> Crutchfield used to. I guess my question is does anyone have a
> recommendation for an alarm with a remote start that offers a plug and
> play harness?. I hate cutting into the ignition wires and such if it's
> not absolutely necessary.
>
Is this really a Jeep question, or is it a remote starter/alarm system
question? There are many variables that go into the answer for this sort of
thing, and the variables that are important to me are likely not very
important to you.
#24
Guest
Posts: n/a
Re: First mods to my new Rubi
"me" <noone@anywhere.com> wrote in message
news:jDNAb.25072$dr1.4147341@news4.srv.hcvlny.cv.n et...
> Having owned a TJ for 6 yrs now, I know there are some things I want to
> do right away, and other things I want to do even sooner than that.
> But, there are some things that I am not sure about.
>
> First off, I should be picking it up on Tuesday. Do I want to take it
> somewhere to have it undercoated?? If so, is there a specific company
> (like Ziebart) in the NJ area that I would be best using?
>
If you lived outside of the snowbelt, I would suggest taking a bye on the
undercoating. It isn't needed. Having said that, I have no idea what the
salt does.
> Second, is there some type of interior coating (under the carpeting)
> that helps to insulate against road noise?? Not so much for me, but the
> wife. We drive everywhere for vacation and she has trouble sleeping
> with all the road noise from the MT/Rs on my Sport. So, I figured
> before I start running CB cables and such it might be best to do some
> noise damping first, if such a thing exists.
>
There is nothing from the factory, but I am sure you can find something if
you look long enough.
> Third, alarm systems. I have one in my Sport now, even has a remote
> start module. I got the alarm from Crutchfield with the nice plug and
> play harness. But when I called Crutchfield regarding the remote
> starter (3 years after the initial alarm install), they had stopped
> carrying it because so many people had trouble installing it. So, I was
> forced to order one from my local stereo shop, and then left to splice
> away since they didn't offer the nice plug and play harness like
> Crutchfield used to. I guess my question is does anyone have a
> recommendation for an alarm with a remote start that offers a plug and
> play harness?. I hate cutting into the ignition wires and such if it's
> not absolutely necessary.
>
Is this really a Jeep question, or is it a remote starter/alarm system
question? There are many variables that go into the answer for this sort of
thing, and the variables that are important to me are likely not very
important to you.
#25
Guest
Posts: n/a
Re: First mods to my new Rubi
"me" <noone@anywhere.com> wrote in message
news:jDNAb.25072$dr1.4147341@news4.srv.hcvlny.cv.n et...
> Having owned a TJ for 6 yrs now, I know there are some things I want to
> do right away, and other things I want to do even sooner than that.
> But, there are some things that I am not sure about.
>
> First off, I should be picking it up on Tuesday. Do I want to take it
> somewhere to have it undercoated?? If so, is there a specific company
> (like Ziebart) in the NJ area that I would be best using?
>
If you lived outside of the snowbelt, I would suggest taking a bye on the
undercoating. It isn't needed. Having said that, I have no idea what the
salt does.
> Second, is there some type of interior coating (under the carpeting)
> that helps to insulate against road noise?? Not so much for me, but the
> wife. We drive everywhere for vacation and she has trouble sleeping
> with all the road noise from the MT/Rs on my Sport. So, I figured
> before I start running CB cables and such it might be best to do some
> noise damping first, if such a thing exists.
>
There is nothing from the factory, but I am sure you can find something if
you look long enough.
> Third, alarm systems. I have one in my Sport now, even has a remote
> start module. I got the alarm from Crutchfield with the nice plug and
> play harness. But when I called Crutchfield regarding the remote
> starter (3 years after the initial alarm install), they had stopped
> carrying it because so many people had trouble installing it. So, I was
> forced to order one from my local stereo shop, and then left to splice
> away since they didn't offer the nice plug and play harness like
> Crutchfield used to. I guess my question is does anyone have a
> recommendation for an alarm with a remote start that offers a plug and
> play harness?. I hate cutting into the ignition wires and such if it's
> not absolutely necessary.
>
Is this really a Jeep question, or is it a remote starter/alarm system
question? There are many variables that go into the answer for this sort of
thing, and the variables that are important to me are likely not very
important to you.
#26
Guest
Posts: n/a
Re: First mods to my new Rubi
This sort of thing is better answered by the guys at the alarm stores. They
should know what the systems are that come on the vehicle, and what is
needed to play well together with their stuff.
"Valued User" <valued@user.com> wrote in message
news:TyOAb.17170$HH.3362@fe1.texas.rr.com...
> Will your Rubi have a Sentry key engine immobilizer? If so then I've read
> that you may have to make your alarm play with it in order to make it
work.
>
> Let me know what you find - I'm definately interested in putting an alarm
> with a proximity sensor in my new TJ (will be ordered on Monday).
>
> "me" <noone@anywhere.com> wrote in message
> news:jDNAb.25072$dr1.4147341@news4.srv.hcvlny.cv.n et...
> > Having owned a TJ for 6 yrs now, I know there are some things I want to
> > do right away, and other things I want to do even sooner than that.
> > But, there are some things that I am not sure about.
> >
> > First off, I should be picking it up on Tuesday. Do I want to take it
> > somewhere to have it undercoated?? If so, is there a specific company
> > (like Ziebart) in the NJ area that I would be best using?
> >
> > Second, is there some type of interior coating (under the carpeting)
> > that helps to insulate against road noise?? Not so much for me, but the
> > wife. We drive everywhere for vacation and she has trouble sleeping
> > with all the road noise from the MT/Rs on my Sport. So, I figured
> > before I start running CB cables and such it might be best to do some
> > noise damping first, if such a thing exists.
> >
> > Third, alarm systems. I have one in my Sport now, even has a remote
> > start module. I got the alarm from Crutchfield with the nice plug and
> > play harness. But when I called Crutchfield regarding the remote
> > starter (3 years after the initial alarm install), they had stopped
> > carrying it because so many people had trouble installing it. So, I was
> > forced to order one from my local stereo shop, and then left to splice
> > away since they didn't offer the nice plug and play harness like
> > Crutchfield used to. I guess my question is does anyone have a
> > recommendation for an alarm with a remote start that offers a plug and
> > play harness?. I hate cutting into the ignition wires and such if it's
> > not absolutely necessary.
> >
> > That's all for now, though I am sure there will be more real soon!
> >
> > TIA,
> >
> > Jay
> >
>
>
should know what the systems are that come on the vehicle, and what is
needed to play well together with their stuff.
"Valued User" <valued@user.com> wrote in message
news:TyOAb.17170$HH.3362@fe1.texas.rr.com...
> Will your Rubi have a Sentry key engine immobilizer? If so then I've read
> that you may have to make your alarm play with it in order to make it
work.
>
> Let me know what you find - I'm definately interested in putting an alarm
> with a proximity sensor in my new TJ (will be ordered on Monday).
>
> "me" <noone@anywhere.com> wrote in message
> news:jDNAb.25072$dr1.4147341@news4.srv.hcvlny.cv.n et...
> > Having owned a TJ for 6 yrs now, I know there are some things I want to
> > do right away, and other things I want to do even sooner than that.
> > But, there are some things that I am not sure about.
> >
> > First off, I should be picking it up on Tuesday. Do I want to take it
> > somewhere to have it undercoated?? If so, is there a specific company
> > (like Ziebart) in the NJ area that I would be best using?
> >
> > Second, is there some type of interior coating (under the carpeting)
> > that helps to insulate against road noise?? Not so much for me, but the
> > wife. We drive everywhere for vacation and she has trouble sleeping
> > with all the road noise from the MT/Rs on my Sport. So, I figured
> > before I start running CB cables and such it might be best to do some
> > noise damping first, if such a thing exists.
> >
> > Third, alarm systems. I have one in my Sport now, even has a remote
> > start module. I got the alarm from Crutchfield with the nice plug and
> > play harness. But when I called Crutchfield regarding the remote
> > starter (3 years after the initial alarm install), they had stopped
> > carrying it because so many people had trouble installing it. So, I was
> > forced to order one from my local stereo shop, and then left to splice
> > away since they didn't offer the nice plug and play harness like
> > Crutchfield used to. I guess my question is does anyone have a
> > recommendation for an alarm with a remote start that offers a plug and
> > play harness?. I hate cutting into the ignition wires and such if it's
> > not absolutely necessary.
> >
> > That's all for now, though I am sure there will be more real soon!
> >
> > TIA,
> >
> > Jay
> >
>
>
#27
Guest
Posts: n/a
Re: First mods to my new Rubi
This sort of thing is better answered by the guys at the alarm stores. They
should know what the systems are that come on the vehicle, and what is
needed to play well together with their stuff.
"Valued User" <valued@user.com> wrote in message
news:TyOAb.17170$HH.3362@fe1.texas.rr.com...
> Will your Rubi have a Sentry key engine immobilizer? If so then I've read
> that you may have to make your alarm play with it in order to make it
work.
>
> Let me know what you find - I'm definately interested in putting an alarm
> with a proximity sensor in my new TJ (will be ordered on Monday).
>
> "me" <noone@anywhere.com> wrote in message
> news:jDNAb.25072$dr1.4147341@news4.srv.hcvlny.cv.n et...
> > Having owned a TJ for 6 yrs now, I know there are some things I want to
> > do right away, and other things I want to do even sooner than that.
> > But, there are some things that I am not sure about.
> >
> > First off, I should be picking it up on Tuesday. Do I want to take it
> > somewhere to have it undercoated?? If so, is there a specific company
> > (like Ziebart) in the NJ area that I would be best using?
> >
> > Second, is there some type of interior coating (under the carpeting)
> > that helps to insulate against road noise?? Not so much for me, but the
> > wife. We drive everywhere for vacation and she has trouble sleeping
> > with all the road noise from the MT/Rs on my Sport. So, I figured
> > before I start running CB cables and such it might be best to do some
> > noise damping first, if such a thing exists.
> >
> > Third, alarm systems. I have one in my Sport now, even has a remote
> > start module. I got the alarm from Crutchfield with the nice plug and
> > play harness. But when I called Crutchfield regarding the remote
> > starter (3 years after the initial alarm install), they had stopped
> > carrying it because so many people had trouble installing it. So, I was
> > forced to order one from my local stereo shop, and then left to splice
> > away since they didn't offer the nice plug and play harness like
> > Crutchfield used to. I guess my question is does anyone have a
> > recommendation for an alarm with a remote start that offers a plug and
> > play harness?. I hate cutting into the ignition wires and such if it's
> > not absolutely necessary.
> >
> > That's all for now, though I am sure there will be more real soon!
> >
> > TIA,
> >
> > Jay
> >
>
>
should know what the systems are that come on the vehicle, and what is
needed to play well together with their stuff.
"Valued User" <valued@user.com> wrote in message
news:TyOAb.17170$HH.3362@fe1.texas.rr.com...
> Will your Rubi have a Sentry key engine immobilizer? If so then I've read
> that you may have to make your alarm play with it in order to make it
work.
>
> Let me know what you find - I'm definately interested in putting an alarm
> with a proximity sensor in my new TJ (will be ordered on Monday).
>
> "me" <noone@anywhere.com> wrote in message
> news:jDNAb.25072$dr1.4147341@news4.srv.hcvlny.cv.n et...
> > Having owned a TJ for 6 yrs now, I know there are some things I want to
> > do right away, and other things I want to do even sooner than that.
> > But, there are some things that I am not sure about.
> >
> > First off, I should be picking it up on Tuesday. Do I want to take it
> > somewhere to have it undercoated?? If so, is there a specific company
> > (like Ziebart) in the NJ area that I would be best using?
> >
> > Second, is there some type of interior coating (under the carpeting)
> > that helps to insulate against road noise?? Not so much for me, but the
> > wife. We drive everywhere for vacation and she has trouble sleeping
> > with all the road noise from the MT/Rs on my Sport. So, I figured
> > before I start running CB cables and such it might be best to do some
> > noise damping first, if such a thing exists.
> >
> > Third, alarm systems. I have one in my Sport now, even has a remote
> > start module. I got the alarm from Crutchfield with the nice plug and
> > play harness. But when I called Crutchfield regarding the remote
> > starter (3 years after the initial alarm install), they had stopped
> > carrying it because so many people had trouble installing it. So, I was
> > forced to order one from my local stereo shop, and then left to splice
> > away since they didn't offer the nice plug and play harness like
> > Crutchfield used to. I guess my question is does anyone have a
> > recommendation for an alarm with a remote start that offers a plug and
> > play harness?. I hate cutting into the ignition wires and such if it's
> > not absolutely necessary.
> >
> > That's all for now, though I am sure there will be more real soon!
> >
> > TIA,
> >
> > Jay
> >
>
>
#28
Guest
Posts: n/a
Re: First mods to my new Rubi
This sort of thing is better answered by the guys at the alarm stores. They
should know what the systems are that come on the vehicle, and what is
needed to play well together with their stuff.
"Valued User" <valued@user.com> wrote in message
news:TyOAb.17170$HH.3362@fe1.texas.rr.com...
> Will your Rubi have a Sentry key engine immobilizer? If so then I've read
> that you may have to make your alarm play with it in order to make it
work.
>
> Let me know what you find - I'm definately interested in putting an alarm
> with a proximity sensor in my new TJ (will be ordered on Monday).
>
> "me" <noone@anywhere.com> wrote in message
> news:jDNAb.25072$dr1.4147341@news4.srv.hcvlny.cv.n et...
> > Having owned a TJ for 6 yrs now, I know there are some things I want to
> > do right away, and other things I want to do even sooner than that.
> > But, there are some things that I am not sure about.
> >
> > First off, I should be picking it up on Tuesday. Do I want to take it
> > somewhere to have it undercoated?? If so, is there a specific company
> > (like Ziebart) in the NJ area that I would be best using?
> >
> > Second, is there some type of interior coating (under the carpeting)
> > that helps to insulate against road noise?? Not so much for me, but the
> > wife. We drive everywhere for vacation and she has trouble sleeping
> > with all the road noise from the MT/Rs on my Sport. So, I figured
> > before I start running CB cables and such it might be best to do some
> > noise damping first, if such a thing exists.
> >
> > Third, alarm systems. I have one in my Sport now, even has a remote
> > start module. I got the alarm from Crutchfield with the nice plug and
> > play harness. But when I called Crutchfield regarding the remote
> > starter (3 years after the initial alarm install), they had stopped
> > carrying it because so many people had trouble installing it. So, I was
> > forced to order one from my local stereo shop, and then left to splice
> > away since they didn't offer the nice plug and play harness like
> > Crutchfield used to. I guess my question is does anyone have a
> > recommendation for an alarm with a remote start that offers a plug and
> > play harness?. I hate cutting into the ignition wires and such if it's
> > not absolutely necessary.
> >
> > That's all for now, though I am sure there will be more real soon!
> >
> > TIA,
> >
> > Jay
> >
>
>
should know what the systems are that come on the vehicle, and what is
needed to play well together with their stuff.
"Valued User" <valued@user.com> wrote in message
news:TyOAb.17170$HH.3362@fe1.texas.rr.com...
> Will your Rubi have a Sentry key engine immobilizer? If so then I've read
> that you may have to make your alarm play with it in order to make it
work.
>
> Let me know what you find - I'm definately interested in putting an alarm
> with a proximity sensor in my new TJ (will be ordered on Monday).
>
> "me" <noone@anywhere.com> wrote in message
> news:jDNAb.25072$dr1.4147341@news4.srv.hcvlny.cv.n et...
> > Having owned a TJ for 6 yrs now, I know there are some things I want to
> > do right away, and other things I want to do even sooner than that.
> > But, there are some things that I am not sure about.
> >
> > First off, I should be picking it up on Tuesday. Do I want to take it
> > somewhere to have it undercoated?? If so, is there a specific company
> > (like Ziebart) in the NJ area that I would be best using?
> >
> > Second, is there some type of interior coating (under the carpeting)
> > that helps to insulate against road noise?? Not so much for me, but the
> > wife. We drive everywhere for vacation and she has trouble sleeping
> > with all the road noise from the MT/Rs on my Sport. So, I figured
> > before I start running CB cables and such it might be best to do some
> > noise damping first, if such a thing exists.
> >
> > Third, alarm systems. I have one in my Sport now, even has a remote
> > start module. I got the alarm from Crutchfield with the nice plug and
> > play harness. But when I called Crutchfield regarding the remote
> > starter (3 years after the initial alarm install), they had stopped
> > carrying it because so many people had trouble installing it. So, I was
> > forced to order one from my local stereo shop, and then left to splice
> > away since they didn't offer the nice plug and play harness like
> > Crutchfield used to. I guess my question is does anyone have a
> > recommendation for an alarm with a remote start that offers a plug and
> > play harness?. I hate cutting into the ignition wires and such if it's
> > not absolutely necessary.
> >
> > That's all for now, though I am sure there will be more real soon!
> >
> > TIA,
> >
> > Jay
> >
>
>
#29
Guest
Posts: n/a
Re: First mods to my new Rubi
Thanks for the input. I guess the alarm question wasn't well stated.
I've been lurking in here for at least 4 years, and I've read of several
guys putting alarms and remote starters on their Jeeps. So I was
curious as to just which ones some of these Jeepers have used. Just to
clarify, I did the install of the plug and play alarm on my '98
Wrangler, and then I did the splicing install of the remote starter
later on the same vehicle. But moisture getting into those connections
and such can wreak havoc on a vehicle's electrical system. A little bit
of corrosion in one of those connections can cause enough of a voltage
drop to kill the ignition. And that would just suck. So, if I don't
have to go cutting into the wires on the new Jeep I'd be much happier,
not to mention it would save me some time.
CRWLR wrote:
> "me" <noone@anywhere.com> wrote in message
> news:jDNAb.25072$dr1.4147341@news4.srv.hcvlny.cv.n et...
>
>>Having owned a TJ for 6 yrs now, I know there are some things I want to
>>do right away, and other things I want to do even sooner than that.
>>But, there are some things that I am not sure about.
>>
>>First off, I should be picking it up on Tuesday. Do I want to take it
>>somewhere to have it undercoated?? If so, is there a specific company
>>(like Ziebart) in the NJ area that I would be best using?
>>
>
> If you lived outside of the snowbelt, I would suggest taking a bye on the
> undercoating. It isn't needed. Having said that, I have no idea what the
> salt does.
>
>
>
>
>
>>Second, is there some type of interior coating (under the carpeting)
>>that helps to insulate against road noise?? Not so much for me, but the
>>wife. We drive everywhere for vacation and she has trouble sleeping
>>with all the road noise from the MT/Rs on my Sport. So, I figured
>>before I start running CB cables and such it might be best to do some
>>noise damping first, if such a thing exists.
>>
>
> There is nothing from the factory, but I am sure you can find something if
> you look long enough.
>
>
>
>
>
>>Third, alarm systems. I have one in my Sport now, even has a remote
>>start module. I got the alarm from Crutchfield with the nice plug and
>>play harness. But when I called Crutchfield regarding the remote
>>starter (3 years after the initial alarm install), they had stopped
>>carrying it because so many people had trouble installing it. So, I was
>>forced to order one from my local stereo shop, and then left to splice
>>away since they didn't offer the nice plug and play harness like
>>Crutchfield used to. I guess my question is does anyone have a
>>recommendation for an alarm with a remote start that offers a plug and
>>play harness?. I hate cutting into the ignition wires and such if it's
>>not absolutely necessary.
>>
>
> Is this really a Jeep question, or is it a remote starter/alarm system
> question? There are many variables that go into the answer for this sort of
> thing, and the variables that are important to me are likely not very
> important to you.
>
>
>
>
>
>
>
I've been lurking in here for at least 4 years, and I've read of several
guys putting alarms and remote starters on their Jeeps. So I was
curious as to just which ones some of these Jeepers have used. Just to
clarify, I did the install of the plug and play alarm on my '98
Wrangler, and then I did the splicing install of the remote starter
later on the same vehicle. But moisture getting into those connections
and such can wreak havoc on a vehicle's electrical system. A little bit
of corrosion in one of those connections can cause enough of a voltage
drop to kill the ignition. And that would just suck. So, if I don't
have to go cutting into the wires on the new Jeep I'd be much happier,
not to mention it would save me some time.
CRWLR wrote:
> "me" <noone@anywhere.com> wrote in message
> news:jDNAb.25072$dr1.4147341@news4.srv.hcvlny.cv.n et...
>
>>Having owned a TJ for 6 yrs now, I know there are some things I want to
>>do right away, and other things I want to do even sooner than that.
>>But, there are some things that I am not sure about.
>>
>>First off, I should be picking it up on Tuesday. Do I want to take it
>>somewhere to have it undercoated?? If so, is there a specific company
>>(like Ziebart) in the NJ area that I would be best using?
>>
>
> If you lived outside of the snowbelt, I would suggest taking a bye on the
> undercoating. It isn't needed. Having said that, I have no idea what the
> salt does.
>
>
>
>
>
>>Second, is there some type of interior coating (under the carpeting)
>>that helps to insulate against road noise?? Not so much for me, but the
>>wife. We drive everywhere for vacation and she has trouble sleeping
>>with all the road noise from the MT/Rs on my Sport. So, I figured
>>before I start running CB cables and such it might be best to do some
>>noise damping first, if such a thing exists.
>>
>
> There is nothing from the factory, but I am sure you can find something if
> you look long enough.
>
>
>
>
>
>>Third, alarm systems. I have one in my Sport now, even has a remote
>>start module. I got the alarm from Crutchfield with the nice plug and
>>play harness. But when I called Crutchfield regarding the remote
>>starter (3 years after the initial alarm install), they had stopped
>>carrying it because so many people had trouble installing it. So, I was
>>forced to order one from my local stereo shop, and then left to splice
>>away since they didn't offer the nice plug and play harness like
>>Crutchfield used to. I guess my question is does anyone have a
>>recommendation for an alarm with a remote start that offers a plug and
>>play harness?. I hate cutting into the ignition wires and such if it's
>>not absolutely necessary.
>>
>
> Is this really a Jeep question, or is it a remote starter/alarm system
> question? There are many variables that go into the answer for this sort of
> thing, and the variables that are important to me are likely not very
> important to you.
>
>
>
>
>
>
>
#30
Guest
Posts: n/a
Re: First mods to my new Rubi
Thanks for the input. I guess the alarm question wasn't well stated.
I've been lurking in here for at least 4 years, and I've read of several
guys putting alarms and remote starters on their Jeeps. So I was
curious as to just which ones some of these Jeepers have used. Just to
clarify, I did the install of the plug and play alarm on my '98
Wrangler, and then I did the splicing install of the remote starter
later on the same vehicle. But moisture getting into those connections
and such can wreak havoc on a vehicle's electrical system. A little bit
of corrosion in one of those connections can cause enough of a voltage
drop to kill the ignition. And that would just suck. So, if I don't
have to go cutting into the wires on the new Jeep I'd be much happier,
not to mention it would save me some time.
CRWLR wrote:
> "me" <noone@anywhere.com> wrote in message
> news:jDNAb.25072$dr1.4147341@news4.srv.hcvlny.cv.n et...
>
>>Having owned a TJ for 6 yrs now, I know there are some things I want to
>>do right away, and other things I want to do even sooner than that.
>>But, there are some things that I am not sure about.
>>
>>First off, I should be picking it up on Tuesday. Do I want to take it
>>somewhere to have it undercoated?? If so, is there a specific company
>>(like Ziebart) in the NJ area that I would be best using?
>>
>
> If you lived outside of the snowbelt, I would suggest taking a bye on the
> undercoating. It isn't needed. Having said that, I have no idea what the
> salt does.
>
>
>
>
>
>>Second, is there some type of interior coating (under the carpeting)
>>that helps to insulate against road noise?? Not so much for me, but the
>>wife. We drive everywhere for vacation and she has trouble sleeping
>>with all the road noise from the MT/Rs on my Sport. So, I figured
>>before I start running CB cables and such it might be best to do some
>>noise damping first, if such a thing exists.
>>
>
> There is nothing from the factory, but I am sure you can find something if
> you look long enough.
>
>
>
>
>
>>Third, alarm systems. I have one in my Sport now, even has a remote
>>start module. I got the alarm from Crutchfield with the nice plug and
>>play harness. But when I called Crutchfield regarding the remote
>>starter (3 years after the initial alarm install), they had stopped
>>carrying it because so many people had trouble installing it. So, I was
>>forced to order one from my local stereo shop, and then left to splice
>>away since they didn't offer the nice plug and play harness like
>>Crutchfield used to. I guess my question is does anyone have a
>>recommendation for an alarm with a remote start that offers a plug and
>>play harness?. I hate cutting into the ignition wires and such if it's
>>not absolutely necessary.
>>
>
> Is this really a Jeep question, or is it a remote starter/alarm system
> question? There are many variables that go into the answer for this sort of
> thing, and the variables that are important to me are likely not very
> important to you.
>
>
>
>
>
>
>
I've been lurking in here for at least 4 years, and I've read of several
guys putting alarms and remote starters on their Jeeps. So I was
curious as to just which ones some of these Jeepers have used. Just to
clarify, I did the install of the plug and play alarm on my '98
Wrangler, and then I did the splicing install of the remote starter
later on the same vehicle. But moisture getting into those connections
and such can wreak havoc on a vehicle's electrical system. A little bit
of corrosion in one of those connections can cause enough of a voltage
drop to kill the ignition. And that would just suck. So, if I don't
have to go cutting into the wires on the new Jeep I'd be much happier,
not to mention it would save me some time.
CRWLR wrote:
> "me" <noone@anywhere.com> wrote in message
> news:jDNAb.25072$dr1.4147341@news4.srv.hcvlny.cv.n et...
>
>>Having owned a TJ for 6 yrs now, I know there are some things I want to
>>do right away, and other things I want to do even sooner than that.
>>But, there are some things that I am not sure about.
>>
>>First off, I should be picking it up on Tuesday. Do I want to take it
>>somewhere to have it undercoated?? If so, is there a specific company
>>(like Ziebart) in the NJ area that I would be best using?
>>
>
> If you lived outside of the snowbelt, I would suggest taking a bye on the
> undercoating. It isn't needed. Having said that, I have no idea what the
> salt does.
>
>
>
>
>
>>Second, is there some type of interior coating (under the carpeting)
>>that helps to insulate against road noise?? Not so much for me, but the
>>wife. We drive everywhere for vacation and she has trouble sleeping
>>with all the road noise from the MT/Rs on my Sport. So, I figured
>>before I start running CB cables and such it might be best to do some
>>noise damping first, if such a thing exists.
>>
>
> There is nothing from the factory, but I am sure you can find something if
> you look long enough.
>
>
>
>
>
>>Third, alarm systems. I have one in my Sport now, even has a remote
>>start module. I got the alarm from Crutchfield with the nice plug and
>>play harness. But when I called Crutchfield regarding the remote
>>starter (3 years after the initial alarm install), they had stopped
>>carrying it because so many people had trouble installing it. So, I was
>>forced to order one from my local stereo shop, and then left to splice
>>away since they didn't offer the nice plug and play harness like
>>Crutchfield used to. I guess my question is does anyone have a
>>recommendation for an alarm with a remote start that offers a plug and
>>play harness?. I hate cutting into the ignition wires and such if it's
>>not absolutely necessary.
>>
>
> Is this really a Jeep question, or is it a remote starter/alarm system
> question? There are many variables that go into the answer for this sort of
> thing, and the variables that are important to me are likely not very
> important to you.
>
>
>
>
>
>
>