firing order on 94 4cly
02-27-2005, 02:40 PM
#2
Guest
Posts: n/a
Re: firing order on 94 4cly
The order is cast written on the intake manifold.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Marvin Oliver wrote:
>
> I hosed of my engine and then changed the plugs,wires, cap, and rotor. Now
> the engine turns over but won't start. I'm hoping I only mixed up the wires.
>
> tia
> jimo
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Marvin Oliver wrote:
>
> I hosed of my engine and then changed the plugs,wires, cap, and rotor. Now
> the engine turns over but won't start. I'm hoping I only mixed up the wires.
>
> tia
> jimo
02-27-2005, 02:40 PM
#3
Guest
Posts: n/a
Re: firing order on 94 4cly
The order is cast written on the intake manifold.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Marvin Oliver wrote:
>
> I hosed of my engine and then changed the plugs,wires, cap, and rotor. Now
> the engine turns over but won't start. I'm hoping I only mixed up the wires.
>
> tia
> jimo
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Marvin Oliver wrote:
>
> I hosed of my engine and then changed the plugs,wires, cap, and rotor. Now
> the engine turns over but won't start. I'm hoping I only mixed up the wires.
>
> tia
> jimo
02-27-2005, 02:40 PM
#4
Guest
Posts: n/a
Re: firing order on 94 4cly
The order is cast written on the intake manifold.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Marvin Oliver wrote:
>
> I hosed of my engine and then changed the plugs,wires, cap, and rotor. Now
> the engine turns over but won't start. I'm hoping I only mixed up the wires.
>
> tia
> jimo
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Marvin Oliver wrote:
>
> I hosed of my engine and then changed the plugs,wires, cap, and rotor. Now
> the engine turns over but won't start. I'm hoping I only mixed up the wires.
>
> tia
> jimo
02-27-2005, 02:48 PM
#8
Guest
Posts: n/a
Re: firing order on 94 4cly
Are you sure there is no water under the distrubutor cap? The smallest
amount can be a problem.. I'd remove the cap and dry the inside out, pull of
the rotator, dry it out, and then dry as much of the inside of the
distributor as you can w/o leaving shreds of rag behind.
HTH
Carl
"Marvin Oliver" <m3599137@earthlink.net> wrote in message
news:E5pUd.7077$873.483@newsread3.news.pas.earthli nk.net...
> I hosed of my engine and then changed the plugs,wires, cap, and rotor. Now
> the engine turns over but won't start. I'm hoping I only mixed up the
wires.
>
> tia
> jimo
>
>
amount can be a problem.. I'd remove the cap and dry the inside out, pull of
the rotator, dry it out, and then dry as much of the inside of the
distributor as you can w/o leaving shreds of rag behind.
HTH
Carl
"Marvin Oliver" <m3599137@earthlink.net> wrote in message
news:E5pUd.7077$873.483@newsread3.news.pas.earthli nk.net...
> I hosed of my engine and then changed the plugs,wires, cap, and rotor. Now
> the engine turns over but won't start. I'm hoping I only mixed up the
wires.
>
> tia
> jimo
>
>
02-27-2005, 02:48 PM
#9
Guest
Posts: n/a
Re: firing order on 94 4cly
Are you sure there is no water under the distrubutor cap? The smallest
amount can be a problem.. I'd remove the cap and dry the inside out, pull of
the rotator, dry it out, and then dry as much of the inside of the
distributor as you can w/o leaving shreds of rag behind.
HTH
Carl
"Marvin Oliver" <m3599137@earthlink.net> wrote in message
news:E5pUd.7077$873.483@newsread3.news.pas.earthli nk.net...
> I hosed of my engine and then changed the plugs,wires, cap, and rotor. Now
> the engine turns over but won't start. I'm hoping I only mixed up the
wires.
>
> tia
> jimo
>
>
amount can be a problem.. I'd remove the cap and dry the inside out, pull of
the rotator, dry it out, and then dry as much of the inside of the
distributor as you can w/o leaving shreds of rag behind.
HTH
Carl
"Marvin Oliver" <m3599137@earthlink.net> wrote in message
news:E5pUd.7077$873.483@newsread3.news.pas.earthli nk.net...
> I hosed of my engine and then changed the plugs,wires, cap, and rotor. Now
> the engine turns over but won't start. I'm hoping I only mixed up the
wires.
>
> tia
> jimo
>
>
02-27-2005, 02:48 PM
#10
Guest
Posts: n/a
Re: firing order on 94 4cly
Are you sure there is no water under the distrubutor cap? The smallest
amount can be a problem.. I'd remove the cap and dry the inside out, pull of
the rotator, dry it out, and then dry as much of the inside of the
distributor as you can w/o leaving shreds of rag behind.
HTH
Carl
"Marvin Oliver" <m3599137@earthlink.net> wrote in message
news:E5pUd.7077$873.483@newsread3.news.pas.earthli nk.net...
> I hosed of my engine and then changed the plugs,wires, cap, and rotor. Now
> the engine turns over but won't start. I'm hoping I only mixed up the
wires.
>
> tia
> jimo
>
>
amount can be a problem.. I'd remove the cap and dry the inside out, pull of
the rotator, dry it out, and then dry as much of the inside of the
distributor as you can w/o leaving shreds of rag behind.
HTH
Carl
"Marvin Oliver" <m3599137@earthlink.net> wrote in message
news:E5pUd.7077$873.483@newsread3.news.pas.earthli nk.net...
> I hosed of my engine and then changed the plugs,wires, cap, and rotor. Now
> the engine turns over but won't start. I'm hoping I only mixed up the
wires.
>
> tia
> jimo
>
>