firing order on 94 4cly
I hosed of my engine and then changed the plugs,wires, cap, and rotor. Now
the engine turns over but won't start. I'm hoping I only mixed up the wires. tia jimo |
Re: firing order on 94 4cly
The order is cast written on the intake manifold.
Mike 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00 88 Cherokee 235 BFG AT's Marvin Oliver wrote: > > I hosed of my engine and then changed the plugs,wires, cap, and rotor. Now > the engine turns over but won't start. I'm hoping I only mixed up the wires. > > tia > jimo |
Re: firing order on 94 4cly
The order is cast written on the intake manifold.
Mike 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00 88 Cherokee 235 BFG AT's Marvin Oliver wrote: > > I hosed of my engine and then changed the plugs,wires, cap, and rotor. Now > the engine turns over but won't start. I'm hoping I only mixed up the wires. > > tia > jimo |
Re: firing order on 94 4cly
The order is cast written on the intake manifold.
Mike 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00 88 Cherokee 235 BFG AT's Marvin Oliver wrote: > > I hosed of my engine and then changed the plugs,wires, cap, and rotor. Now > the engine turns over but won't start. I'm hoping I only mixed up the wires. > > tia > jimo |
Re: firing order on 94 4cly
By the way the jeep has sat in the driveway about 48 hrs drying
|
Re: firing order on 94 4cly
By the way the jeep has sat in the driveway about 48 hrs drying
|
Re: firing order on 94 4cly
By the way the jeep has sat in the driveway about 48 hrs drying
|
Re: firing order on 94 4cly
Are you sure there is no water under the distrubutor cap? The smallest
amount can be a problem.. I'd remove the cap and dry the inside out, pull of the rotator, dry it out, and then dry as much of the inside of the distributor as you can w/o leaving shreds of rag behind. HTH Carl "Marvin Oliver" <m3599137@earthlink.net> wrote in message news:E5pUd.7077$873.483@newsread3.news.pas.earthli nk.net... > I hosed of my engine and then changed the plugs,wires, cap, and rotor. Now > the engine turns over but won't start. I'm hoping I only mixed up the wires. > > tia > jimo > > |
Re: firing order on 94 4cly
Are you sure there is no water under the distrubutor cap? The smallest
amount can be a problem.. I'd remove the cap and dry the inside out, pull of the rotator, dry it out, and then dry as much of the inside of the distributor as you can w/o leaving shreds of rag behind. HTH Carl "Marvin Oliver" <m3599137@earthlink.net> wrote in message news:E5pUd.7077$873.483@newsread3.news.pas.earthli nk.net... > I hosed of my engine and then changed the plugs,wires, cap, and rotor. Now > the engine turns over but won't start. I'm hoping I only mixed up the wires. > > tia > jimo > > |
Re: firing order on 94 4cly
Are you sure there is no water under the distrubutor cap? The smallest
amount can be a problem.. I'd remove the cap and dry the inside out, pull of the rotator, dry it out, and then dry as much of the inside of the distributor as you can w/o leaving shreds of rag behind. HTH Carl "Marvin Oliver" <m3599137@earthlink.net> wrote in message news:E5pUd.7077$873.483@newsread3.news.pas.earthli nk.net... > I hosed of my engine and then changed the plugs,wires, cap, and rotor. Now > the engine turns over but won't start. I'm hoping I only mixed up the wires. > > tia > jimo > > |
All times are GMT -4. The time now is 06:31 PM. |
© 2024 MH Sub I, LLC dba Internet Brands