This fell off...What is it and do I need it back on?
08-16-2007, 09:17 PM
#11
Guest
Posts: n/a
Re: This fell off...What is it and do I need it back on?
Matt Macchiarolo wrote:
> Looks like the heat shield over the catalytic converter. You should
> put it back on or you might melt your carpeting.
That's what I'm thinking. Get under the jeep and see if there are corresponding
hold-downs just above the cat. If there is then you will need to secure that
shield back on.
Since the holes will be too large you will need to take one of the bolts out
and take the washer down to a hardware store. Get a fender washer or similar
that has the same hole but about another 1/2" in width. You might be able to
fabricate a few out of a tin can if your handy that way.
> "Sam" <sam@sam.com> wrote in message
> news:keq9c3lf753jcgikq2pikheha7tks6snjc@4ax.com...
>> http://www.coyoterock.net/pix/jeep.jpg
>>
>> 1998 Jeep Cherokee Sport
>>
>> Thanks,
>>
>> Sam
> Looks like the heat shield over the catalytic converter. You should
> put it back on or you might melt your carpeting.
That's what I'm thinking. Get under the jeep and see if there are corresponding
hold-downs just above the cat. If there is then you will need to secure that
shield back on.
Since the holes will be too large you will need to take one of the bolts out
and take the washer down to a hardware store. Get a fender washer or similar
that has the same hole but about another 1/2" in width. You might be able to
fabricate a few out of a tin can if your handy that way.
> "Sam" <sam@sam.com> wrote in message
> news:keq9c3lf753jcgikq2pikheha7tks6snjc@4ax.com...
>> http://www.coyoterock.net/pix/jeep.jpg
>>
>> 1998 Jeep Cherokee Sport
>>
>> Thanks,
>>
>> Sam
08-16-2007, 09:17 PM
#12
Guest
Posts: n/a
Re: This fell off...What is it and do I need it back on?
Matt Macchiarolo wrote:
> Looks like the heat shield over the catalytic converter. You should
> put it back on or you might melt your carpeting.
That's what I'm thinking. Get under the jeep and see if there are corresponding
hold-downs just above the cat. If there is then you will need to secure that
shield back on.
Since the holes will be too large you will need to take one of the bolts out
and take the washer down to a hardware store. Get a fender washer or similar
that has the same hole but about another 1/2" in width. You might be able to
fabricate a few out of a tin can if your handy that way.
> "Sam" <sam@sam.com> wrote in message
> news:keq9c3lf753jcgikq2pikheha7tks6snjc@4ax.com...
>> http://www.coyoterock.net/pix/jeep.jpg
>>
>> 1998 Jeep Cherokee Sport
>>
>> Thanks,
>>
>> Sam
> Looks like the heat shield over the catalytic converter. You should
> put it back on or you might melt your carpeting.
That's what I'm thinking. Get under the jeep and see if there are corresponding
hold-downs just above the cat. If there is then you will need to secure that
shield back on.
Since the holes will be too large you will need to take one of the bolts out
and take the washer down to a hardware store. Get a fender washer or similar
that has the same hole but about another 1/2" in width. You might be able to
fabricate a few out of a tin can if your handy that way.
> "Sam" <sam@sam.com> wrote in message
> news:keq9c3lf753jcgikq2pikheha7tks6snjc@4ax.com...
>> http://www.coyoterock.net/pix/jeep.jpg
>>
>> 1998 Jeep Cherokee Sport
>>
>> Thanks,
>>
>> Sam
08-16-2007, 09:17 PM
#13
Guest
Posts: n/a
Re: This fell off...What is it and do I need it back on?
Matt Macchiarolo wrote:
> Looks like the heat shield over the catalytic converter. You should
> put it back on or you might melt your carpeting.
That's what I'm thinking. Get under the jeep and see if there are corresponding
hold-downs just above the cat. If there is then you will need to secure that
shield back on.
Since the holes will be too large you will need to take one of the bolts out
and take the washer down to a hardware store. Get a fender washer or similar
that has the same hole but about another 1/2" in width. You might be able to
fabricate a few out of a tin can if your handy that way.
> "Sam" <sam@sam.com> wrote in message
> news:keq9c3lf753jcgikq2pikheha7tks6snjc@4ax.com...
>> http://www.coyoterock.net/pix/jeep.jpg
>>
>> 1998 Jeep Cherokee Sport
>>
>> Thanks,
>>
>> Sam
> Looks like the heat shield over the catalytic converter. You should
> put it back on or you might melt your carpeting.
That's what I'm thinking. Get under the jeep and see if there are corresponding
hold-downs just above the cat. If there is then you will need to secure that
shield back on.
Since the holes will be too large you will need to take one of the bolts out
and take the washer down to a hardware store. Get a fender washer or similar
that has the same hole but about another 1/2" in width. You might be able to
fabricate a few out of a tin can if your handy that way.
> "Sam" <sam@sam.com> wrote in message
> news:keq9c3lf753jcgikq2pikheha7tks6snjc@4ax.com...
>> http://www.coyoterock.net/pix/jeep.jpg
>>
>> 1998 Jeep Cherokee Sport
>>
>> Thanks,
>>
>> Sam
08-17-2007, 12:56 PM
#18
Guest
Posts: n/a
Re: This fell off...What is it and do I need it back on?
Looks like the heat shield over the catalytic converter to me. you
better get that guy back as soon as you can. Or pay someone to do it.
But it has to be put back on.
99 wrangler TJ 2.5 lift 31 inch Good year MTR tires and a ton of
lights
Warn M8000 winch and more toys to come.
Some people have an addiction to drink...
Some people have an addiction to drugs....
I just have an addiction to Jeeps and their accessories....
better get that guy back as soon as you can. Or pay someone to do it.
But it has to be put back on.
99 wrangler TJ 2.5 lift 31 inch Good year MTR tires and a ton of
lights
Warn M8000 winch and more toys to come.
Some people have an addiction to drink...
Some people have an addiction to drugs....
I just have an addiction to Jeeps and their accessories....
08-17-2007, 12:56 PM
#19
Guest
Posts: n/a
Re: This fell off...What is it and do I need it back on?
Looks like the heat shield over the catalytic converter to me. you
better get that guy back as soon as you can. Or pay someone to do it.
But it has to be put back on.
99 wrangler TJ 2.5 lift 31 inch Good year MTR tires and a ton of
lights
Warn M8000 winch and more toys to come.
Some people have an addiction to drink...
Some people have an addiction to drugs....
I just have an addiction to Jeeps and their accessories....
better get that guy back as soon as you can. Or pay someone to do it.
But it has to be put back on.
99 wrangler TJ 2.5 lift 31 inch Good year MTR tires and a ton of
lights
Warn M8000 winch and more toys to come.
Some people have an addiction to drink...
Some people have an addiction to drugs....
I just have an addiction to Jeeps and their accessories....
08-17-2007, 12:56 PM
#20
Guest
Posts: n/a
Re: This fell off...What is it and do I need it back on?
Looks like the heat shield over the catalytic converter to me. you
better get that guy back as soon as you can. Or pay someone to do it.
But it has to be put back on.
99 wrangler TJ 2.5 lift 31 inch Good year MTR tires and a ton of
lights
Warn M8000 winch and more toys to come.
Some people have an addiction to drink...
Some people have an addiction to drugs....
I just have an addiction to Jeeps and their accessories....
better get that guy back as soon as you can. Or pay someone to do it.
But it has to be put back on.
99 wrangler TJ 2.5 lift 31 inch Good year MTR tires and a ton of
lights
Warn M8000 winch and more toys to come.
Some people have an addiction to drink...
Some people have an addiction to drugs....
I just have an addiction to Jeeps and their accessories....