exploded view of trans mount?
11-01-2004, 07:55 PM
#21
Guest
Posts: n/a
Re: exploded view of trans mount?
It lined up and mine is off to the passenger side also. It all looks right
now, thanks for the help. Now for my next question - see my new post.
--
_____________________
HomeBrewer
85CJ7 (in Progress)
http://85cj7.blogspot.com/
99XJ Sport
Remove the xxx to reply!
"Mike Romain" <romainm@sympatico.ca> wrote in message
news:4186A5EE.E1A191E0@sympatico.ca...
> So is mine, but we both have 258's.
>
> His motor mount frame pieces look 'nothing' like ours and are not the
> same lengths so those could set his engine anywhere in there, maybe in
> the center with the other bolt hole?
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
>
> JimG wrote:
>>
>> Mine was off to the passenger side using 2 bolts into the tranny.
>>
>> --
>> JimG
>> 80' CJ-7 258 CID, HEI
>> 4.56 Gears, Lock-Right F&R
>> 35" BFG MT on 15x10 Centerlines
>> D44 Rear, D30 Front. SOA
>> Dana 300 w/4:1 & Currie twin sticks
>> Warn X8000i w/ dual batteries
>>
>> 00' TJ Sport 4.0L, 5sp
>> 4.56 Gears, TrueTrac rear
>> 33" BFG AT on 15x8 Eagle Alloys
>> D35 Rear, D30 Front. 3" Suspension Lift
>>
>> "HomeBrewer" wrote in message ...
>> > Thanks for the info - greatly appreciated....Now for the tranny mount.
>> > I
>> > have tthree bolt holes in the bottom of the transmission - does the
>> > tranny
>> > mount get centered on the three holes or is it off to one side?
>> > --
>> > _____________________
>> > HomeBrewer
>> > 85CJ7 (in Progress)
>> > http://85cj7.blogspot.com/
>> > 99XJ Sport
>> > Remove the xxx to reply!
>> >
now, thanks for the help. Now for my next question - see my new post.
--
_____________________
HomeBrewer
85CJ7 (in Progress)
http://85cj7.blogspot.com/
99XJ Sport
Remove the xxx to reply!
"Mike Romain" <romainm@sympatico.ca> wrote in message
news:4186A5EE.E1A191E0@sympatico.ca...
> So is mine, but we both have 258's.
>
> His motor mount frame pieces look 'nothing' like ours and are not the
> same lengths so those could set his engine anywhere in there, maybe in
> the center with the other bolt hole?
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
>
> JimG wrote:
>>
>> Mine was off to the passenger side using 2 bolts into the tranny.
>>
>> --
>> JimG
>> 80' CJ-7 258 CID, HEI
>> 4.56 Gears, Lock-Right F&R
>> 35" BFG MT on 15x10 Centerlines
>> D44 Rear, D30 Front. SOA
>> Dana 300 w/4:1 & Currie twin sticks
>> Warn X8000i w/ dual batteries
>>
>> 00' TJ Sport 4.0L, 5sp
>> 4.56 Gears, TrueTrac rear
>> 33" BFG AT on 15x8 Eagle Alloys
>> D35 Rear, D30 Front. 3" Suspension Lift
>>
>> "HomeBrewer" wrote in message ...
>> > Thanks for the info - greatly appreciated....Now for the tranny mount.
>> > I
>> > have tthree bolt holes in the bottom of the transmission - does the
>> > tranny
>> > mount get centered on the three holes or is it off to one side?
>> > --
>> > _____________________
>> > HomeBrewer
>> > 85CJ7 (in Progress)
>> > http://85cj7.blogspot.com/
>> > 99XJ Sport
>> > Remove the xxx to reply!
>> >
11-01-2004, 07:55 PM
#22
Guest
Posts: n/a
Re: exploded view of trans mount?
It lined up and mine is off to the passenger side also. It all looks right
now, thanks for the help. Now for my next question - see my new post.
--
_____________________
HomeBrewer
85CJ7 (in Progress)
http://85cj7.blogspot.com/
99XJ Sport
Remove the xxx to reply!
"Mike Romain" <romainm@sympatico.ca> wrote in message
news:4186A5EE.E1A191E0@sympatico.ca...
> So is mine, but we both have 258's.
>
> His motor mount frame pieces look 'nothing' like ours and are not the
> same lengths so those could set his engine anywhere in there, maybe in
> the center with the other bolt hole?
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
>
> JimG wrote:
>>
>> Mine was off to the passenger side using 2 bolts into the tranny.
>>
>> --
>> JimG
>> 80' CJ-7 258 CID, HEI
>> 4.56 Gears, Lock-Right F&R
>> 35" BFG MT on 15x10 Centerlines
>> D44 Rear, D30 Front. SOA
>> Dana 300 w/4:1 & Currie twin sticks
>> Warn X8000i w/ dual batteries
>>
>> 00' TJ Sport 4.0L, 5sp
>> 4.56 Gears, TrueTrac rear
>> 33" BFG AT on 15x8 Eagle Alloys
>> D35 Rear, D30 Front. 3" Suspension Lift
>>
>> "HomeBrewer" wrote in message ...
>> > Thanks for the info - greatly appreciated....Now for the tranny mount.
>> > I
>> > have tthree bolt holes in the bottom of the transmission - does the
>> > tranny
>> > mount get centered on the three holes or is it off to one side?
>> > --
>> > _____________________
>> > HomeBrewer
>> > 85CJ7 (in Progress)
>> > http://85cj7.blogspot.com/
>> > 99XJ Sport
>> > Remove the xxx to reply!
>> >
now, thanks for the help. Now for my next question - see my new post.
--
_____________________
HomeBrewer
85CJ7 (in Progress)
http://85cj7.blogspot.com/
99XJ Sport
Remove the xxx to reply!
"Mike Romain" <romainm@sympatico.ca> wrote in message
news:4186A5EE.E1A191E0@sympatico.ca...
> So is mine, but we both have 258's.
>
> His motor mount frame pieces look 'nothing' like ours and are not the
> same lengths so those could set his engine anywhere in there, maybe in
> the center with the other bolt hole?
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
>
> JimG wrote:
>>
>> Mine was off to the passenger side using 2 bolts into the tranny.
>>
>> --
>> JimG
>> 80' CJ-7 258 CID, HEI
>> 4.56 Gears, Lock-Right F&R
>> 35" BFG MT on 15x10 Centerlines
>> D44 Rear, D30 Front. SOA
>> Dana 300 w/4:1 & Currie twin sticks
>> Warn X8000i w/ dual batteries
>>
>> 00' TJ Sport 4.0L, 5sp
>> 4.56 Gears, TrueTrac rear
>> 33" BFG AT on 15x8 Eagle Alloys
>> D35 Rear, D30 Front. 3" Suspension Lift
>>
>> "HomeBrewer" wrote in message ...
>> > Thanks for the info - greatly appreciated....Now for the tranny mount.
>> > I
>> > have tthree bolt holes in the bottom of the transmission - does the
>> > tranny
>> > mount get centered on the three holes or is it off to one side?
>> > --
>> > _____________________
>> > HomeBrewer
>> > 85CJ7 (in Progress)
>> > http://85cj7.blogspot.com/
>> > 99XJ Sport
>> > Remove the xxx to reply!
>> >
11-03-2004, 01:54 PM
#23
Guest
Posts: n/a
Re: exploded view of trans mount?
It only fits one way. Back up, mine only fits one way.
"HomeBrewer" <85cj7XXX@***.net> wrote in message
news:2uiuqhF2b8fpiU1@uni-berlin.de...
> Thanks for the info - greatly appreciated....Now for the tranny mount. I
> have tthree bolt holes in the bottom of the transmission - does the tranny
> mount get centered on the three holes or is it off to one side?
> --
> _____________________
> HomeBrewer
> 85CJ7 (in Progress)
> http://85cj7.blogspot.com/
> 99XJ Sport
> Remove the xxx to reply!
>
> "Jeff Strickland" <crwlr@yahoo.com> wrote in message
> news:10o7gtk1ti8g590@corp.supernews.com...
> >I just looked through my FSM, and could not find the illustration. Let me
> >try from memory.
> >
> > The long bolt has flats in the middle that are off center. The shorter
end
> > is the bottom, it points at the ground. One of the rubber cushions fits
on
> > top of the flats and below the bracket on the transmission. The other
> > cushion goes above the bracket. The cushions are each sandwiched by a
> > large washer, and they in turn sandwich the bracket on the transmission.
> > The bolt is tightened by a nut that is exposed below the skid plate, and
> > the cushions are tightened against the bracket by a nut that fits on top
> > of the bolt..
> >
> > From the top of the large bolt the stacking order is nut, washer,
cushion,
> > transmission bracket, cushion, washer, flats in the middle of the bolt,
> > skid plate, washer, nut.
> >
> >
> >
> >
> >
> > "HomeBrewer" <85cj7XXX@***.net> wrote in message
> > news:2uhpqnF29s1kvU1@uni-berlin.de...
> >> Can someone point me to an exploded view of a transmission torque arm
and
> >> mount in a 76-86 CJ7? My pictures upon disassembly are not quite enough
> >> for me to reassemble.
> >>
> >> --
> >> _____________________
> >> HomeBrewer
> >> 85CJ7 (in Progress)
> >> http://85cj7.blogspot.com/
> >> 99XJ Sport
> >> Remove the xxx to reply!
> >>
> >>
> >
> >
>
>
"HomeBrewer" <85cj7XXX@***.net> wrote in message
news:2uiuqhF2b8fpiU1@uni-berlin.de...
> Thanks for the info - greatly appreciated....Now for the tranny mount. I
> have tthree bolt holes in the bottom of the transmission - does the tranny
> mount get centered on the three holes or is it off to one side?
> --
> _____________________
> HomeBrewer
> 85CJ7 (in Progress)
> http://85cj7.blogspot.com/
> 99XJ Sport
> Remove the xxx to reply!
>
> "Jeff Strickland" <crwlr@yahoo.com> wrote in message
> news:10o7gtk1ti8g590@corp.supernews.com...
> >I just looked through my FSM, and could not find the illustration. Let me
> >try from memory.
> >
> > The long bolt has flats in the middle that are off center. The shorter
end
> > is the bottom, it points at the ground. One of the rubber cushions fits
on
> > top of the flats and below the bracket on the transmission. The other
> > cushion goes above the bracket. The cushions are each sandwiched by a
> > large washer, and they in turn sandwich the bracket on the transmission.
> > The bolt is tightened by a nut that is exposed below the skid plate, and
> > the cushions are tightened against the bracket by a nut that fits on top
> > of the bolt..
> >
> > From the top of the large bolt the stacking order is nut, washer,
cushion,
> > transmission bracket, cushion, washer, flats in the middle of the bolt,
> > skid plate, washer, nut.
> >
> >
> >
> >
> >
> > "HomeBrewer" <85cj7XXX@***.net> wrote in message
> > news:2uhpqnF29s1kvU1@uni-berlin.de...
> >> Can someone point me to an exploded view of a transmission torque arm
and
> >> mount in a 76-86 CJ7? My pictures upon disassembly are not quite enough
> >> for me to reassemble.
> >>
> >> --
> >> _____________________
> >> HomeBrewer
> >> 85CJ7 (in Progress)
> >> http://85cj7.blogspot.com/
> >> 99XJ Sport
> >> Remove the xxx to reply!
> >>
> >>
> >
> >
>
>
11-03-2004, 01:54 PM
#24
Guest
Posts: n/a
Re: exploded view of trans mount?
It only fits one way. Back up, mine only fits one way.
"HomeBrewer" <85cj7XXX@***.net> wrote in message
news:2uiuqhF2b8fpiU1@uni-berlin.de...
> Thanks for the info - greatly appreciated....Now for the tranny mount. I
> have tthree bolt holes in the bottom of the transmission - does the tranny
> mount get centered on the three holes or is it off to one side?
> --
> _____________________
> HomeBrewer
> 85CJ7 (in Progress)
> http://85cj7.blogspot.com/
> 99XJ Sport
> Remove the xxx to reply!
>
> "Jeff Strickland" <crwlr@yahoo.com> wrote in message
> news:10o7gtk1ti8g590@corp.supernews.com...
> >I just looked through my FSM, and could not find the illustration. Let me
> >try from memory.
> >
> > The long bolt has flats in the middle that are off center. The shorter
end
> > is the bottom, it points at the ground. One of the rubber cushions fits
on
> > top of the flats and below the bracket on the transmission. The other
> > cushion goes above the bracket. The cushions are each sandwiched by a
> > large washer, and they in turn sandwich the bracket on the transmission.
> > The bolt is tightened by a nut that is exposed below the skid plate, and
> > the cushions are tightened against the bracket by a nut that fits on top
> > of the bolt..
> >
> > From the top of the large bolt the stacking order is nut, washer,
cushion,
> > transmission bracket, cushion, washer, flats in the middle of the bolt,
> > skid plate, washer, nut.
> >
> >
> >
> >
> >
> > "HomeBrewer" <85cj7XXX@***.net> wrote in message
> > news:2uhpqnF29s1kvU1@uni-berlin.de...
> >> Can someone point me to an exploded view of a transmission torque arm
and
> >> mount in a 76-86 CJ7? My pictures upon disassembly are not quite enough
> >> for me to reassemble.
> >>
> >> --
> >> _____________________
> >> HomeBrewer
> >> 85CJ7 (in Progress)
> >> http://85cj7.blogspot.com/
> >> 99XJ Sport
> >> Remove the xxx to reply!
> >>
> >>
> >
> >
>
>
"HomeBrewer" <85cj7XXX@***.net> wrote in message
news:2uiuqhF2b8fpiU1@uni-berlin.de...
> Thanks for the info - greatly appreciated....Now for the tranny mount. I
> have tthree bolt holes in the bottom of the transmission - does the tranny
> mount get centered on the three holes or is it off to one side?
> --
> _____________________
> HomeBrewer
> 85CJ7 (in Progress)
> http://85cj7.blogspot.com/
> 99XJ Sport
> Remove the xxx to reply!
>
> "Jeff Strickland" <crwlr@yahoo.com> wrote in message
> news:10o7gtk1ti8g590@corp.supernews.com...
> >I just looked through my FSM, and could not find the illustration. Let me
> >try from memory.
> >
> > The long bolt has flats in the middle that are off center. The shorter
end
> > is the bottom, it points at the ground. One of the rubber cushions fits
on
> > top of the flats and below the bracket on the transmission. The other
> > cushion goes above the bracket. The cushions are each sandwiched by a
> > large washer, and they in turn sandwich the bracket on the transmission.
> > The bolt is tightened by a nut that is exposed below the skid plate, and
> > the cushions are tightened against the bracket by a nut that fits on top
> > of the bolt..
> >
> > From the top of the large bolt the stacking order is nut, washer,
cushion,
> > transmission bracket, cushion, washer, flats in the middle of the bolt,
> > skid plate, washer, nut.
> >
> >
> >
> >
> >
> > "HomeBrewer" <85cj7XXX@***.net> wrote in message
> > news:2uhpqnF29s1kvU1@uni-berlin.de...
> >> Can someone point me to an exploded view of a transmission torque arm
and
> >> mount in a 76-86 CJ7? My pictures upon disassembly are not quite enough
> >> for me to reassemble.
> >>
> >> --
> >> _____________________
> >> HomeBrewer
> >> 85CJ7 (in Progress)
> >> http://85cj7.blogspot.com/
> >> 99XJ Sport
> >> Remove the xxx to reply!
> >>
> >>
> >
> >
>
>
Thread
Thread Starter
Forum
Replies
Last Post
Alouf Zen
Jeep Mailing List
9
09-28-2004 02:22 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)