engine now making noise
01-28-2004, 09:21 PM
#1
Guest
Posts: n/a
engine now making noise
I completed one cylinder replacing the valve seals and decided to put the
valve cover back on after torqueing down the rocker arms on my 4.2L engine.
I wanted to see if I could tell a difference in this cylinder spark plug
wise after the change.
Anyway, I'm now hearing a clacking noise when the engine is running. I
remembered what someone said about replacing the right components back in
the right place so I took the valve cover back off and changed the rocker
arms around. This seemed to make the sound better but it's still not
sounding good.
Any ideas on this?
Thank you,
Bill
valve cover back on after torqueing down the rocker arms on my 4.2L engine.
I wanted to see if I could tell a difference in this cylinder spark plug
wise after the change.
Anyway, I'm now hearing a clacking noise when the engine is running. I
remembered what someone said about replacing the right components back in
the right place so I took the valve cover back off and changed the rocker
arms around. This seemed to make the sound better but it's still not
sounding good.
Any ideas on this?
Thank you,
Bill
01-28-2004, 09:25 PM
#2
Guest
Posts: n/a
Re: engine now making noise
Just make sure you haven't lost a keeper.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
William Oliveri wrote:
>
> I completed one cylinder replacing the valve seals and decided to put the
> valve cover back on after torqueing down the rocker arms on my 4.2L engine.
> I wanted to see if I could tell a difference in this cylinder spark plug
> wise after the change.
>
> Anyway, I'm now hearing a clacking noise when the engine is running. I
> remembered what someone said about replacing the right components back in
> the right place so I took the valve cover back off and changed the rocker
> arms around. This seemed to make the sound better but it's still not
> sounding good.
>
> Any ideas on this?
>
> Thank you,
>
> Bill
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
William Oliveri wrote:
>
> I completed one cylinder replacing the valve seals and decided to put the
> valve cover back on after torqueing down the rocker arms on my 4.2L engine.
> I wanted to see if I could tell a difference in this cylinder spark plug
> wise after the change.
>
> Anyway, I'm now hearing a clacking noise when the engine is running. I
> remembered what someone said about replacing the right components back in
> the right place so I took the valve cover back off and changed the rocker
> arms around. This seemed to make the sound better but it's still not
> sounding good.
>
> Any ideas on this?
>
> Thank you,
>
> Bill
01-28-2004, 09:25 PM
#3
Guest
Posts: n/a
Re: engine now making noise
Just make sure you haven't lost a keeper.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
William Oliveri wrote:
>
> I completed one cylinder replacing the valve seals and decided to put the
> valve cover back on after torqueing down the rocker arms on my 4.2L engine.
> I wanted to see if I could tell a difference in this cylinder spark plug
> wise after the change.
>
> Anyway, I'm now hearing a clacking noise when the engine is running. I
> remembered what someone said about replacing the right components back in
> the right place so I took the valve cover back off and changed the rocker
> arms around. This seemed to make the sound better but it's still not
> sounding good.
>
> Any ideas on this?
>
> Thank you,
>
> Bill
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
William Oliveri wrote:
>
> I completed one cylinder replacing the valve seals and decided to put the
> valve cover back on after torqueing down the rocker arms on my 4.2L engine.
> I wanted to see if I could tell a difference in this cylinder spark plug
> wise after the change.
>
> Anyway, I'm now hearing a clacking noise when the engine is running. I
> remembered what someone said about replacing the right components back in
> the right place so I took the valve cover back off and changed the rocker
> arms around. This seemed to make the sound better but it's still not
> sounding good.
>
> Any ideas on this?
>
> Thank you,
>
> Bill
01-28-2004, 09:25 PM
#4
Guest
Posts: n/a
Re: engine now making noise
Just make sure you haven't lost a keeper.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
William Oliveri wrote:
>
> I completed one cylinder replacing the valve seals and decided to put the
> valve cover back on after torqueing down the rocker arms on my 4.2L engine.
> I wanted to see if I could tell a difference in this cylinder spark plug
> wise after the change.
>
> Anyway, I'm now hearing a clacking noise when the engine is running. I
> remembered what someone said about replacing the right components back in
> the right place so I took the valve cover back off and changed the rocker
> arms around. This seemed to make the sound better but it's still not
> sounding good.
>
> Any ideas on this?
>
> Thank you,
>
> Bill
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
William Oliveri wrote:
>
> I completed one cylinder replacing the valve seals and decided to put the
> valve cover back on after torqueing down the rocker arms on my 4.2L engine.
> I wanted to see if I could tell a difference in this cylinder spark plug
> wise after the change.
>
> Anyway, I'm now hearing a clacking noise when the engine is running. I
> remembered what someone said about replacing the right components back in
> the right place so I took the valve cover back off and changed the rocker
> arms around. This seemed to make the sound better but it's still not
> sounding good.
>
> Any ideas on this?
>
> Thank you,
>
> Bill
01-29-2004, 01:04 AM
#5
Guest
Posts: n/a
Re: engine now making noise
Nope, checked and double checked those.
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:40186F01.3DD47259@***.net...
> Just make sure you haven't lost a keeper.
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> William Oliveri wrote:
> >
> > I completed one cylinder replacing the valve seals and decided to put
the
> > valve cover back on after torqueing down the rocker arms on my 4.2L
engine.
> > I wanted to see if I could tell a difference in this cylinder spark plug
> > wise after the change.
> >
> > Anyway, I'm now hearing a clacking noise when the engine is running. I
> > remembered what someone said about replacing the right components back
in
> > the right place so I took the valve cover back off and changed the
rocker
> > arms around. This seemed to make the sound better but it's still not
> > sounding good.
> >
> > Any ideas on this?
> >
> > Thank you,
> >
> > Bill
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:40186F01.3DD47259@***.net...
> Just make sure you haven't lost a keeper.
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> William Oliveri wrote:
> >
> > I completed one cylinder replacing the valve seals and decided to put
the
> > valve cover back on after torqueing down the rocker arms on my 4.2L
engine.
> > I wanted to see if I could tell a difference in this cylinder spark plug
> > wise after the change.
> >
> > Anyway, I'm now hearing a clacking noise when the engine is running. I
> > remembered what someone said about replacing the right components back
in
> > the right place so I took the valve cover back off and changed the
rocker
> > arms around. This seemed to make the sound better but it's still not
> > sounding good.
> >
> > Any ideas on this?
> >
> > Thank you,
> >
> > Bill
01-29-2004, 01:04 AM
#6
Guest
Posts: n/a
Re: engine now making noise
Nope, checked and double checked those.
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:40186F01.3DD47259@***.net...
> Just make sure you haven't lost a keeper.
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> William Oliveri wrote:
> >
> > I completed one cylinder replacing the valve seals and decided to put
the
> > valve cover back on after torqueing down the rocker arms on my 4.2L
engine.
> > I wanted to see if I could tell a difference in this cylinder spark plug
> > wise after the change.
> >
> > Anyway, I'm now hearing a clacking noise when the engine is running. I
> > remembered what someone said about replacing the right components back
in
> > the right place so I took the valve cover back off and changed the
rocker
> > arms around. This seemed to make the sound better but it's still not
> > sounding good.
> >
> > Any ideas on this?
> >
> > Thank you,
> >
> > Bill
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:40186F01.3DD47259@***.net...
> Just make sure you haven't lost a keeper.
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> William Oliveri wrote:
> >
> > I completed one cylinder replacing the valve seals and decided to put
the
> > valve cover back on after torqueing down the rocker arms on my 4.2L
engine.
> > I wanted to see if I could tell a difference in this cylinder spark plug
> > wise after the change.
> >
> > Anyway, I'm now hearing a clacking noise when the engine is running. I
> > remembered what someone said about replacing the right components back
in
> > the right place so I took the valve cover back off and changed the
rocker
> > arms around. This seemed to make the sound better but it's still not
> > sounding good.
> >
> > Any ideas on this?
> >
> > Thank you,
> >
> > Bill
01-29-2004, 01:04 AM
#7
Guest
Posts: n/a
Re: engine now making noise
Nope, checked and double checked those.
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:40186F01.3DD47259@***.net...
> Just make sure you haven't lost a keeper.
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> William Oliveri wrote:
> >
> > I completed one cylinder replacing the valve seals and decided to put
the
> > valve cover back on after torqueing down the rocker arms on my 4.2L
engine.
> > I wanted to see if I could tell a difference in this cylinder spark plug
> > wise after the change.
> >
> > Anyway, I'm now hearing a clacking noise when the engine is running. I
> > remembered what someone said about replacing the right components back
in
> > the right place so I took the valve cover back off and changed the
rocker
> > arms around. This seemed to make the sound better but it's still not
> > sounding good.
> >
> > Any ideas on this?
> >
> > Thank you,
> >
> > Bill
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:40186F01.3DD47259@***.net...
> Just make sure you haven't lost a keeper.
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> William Oliveri wrote:
> >
> > I completed one cylinder replacing the valve seals and decided to put
the
> > valve cover back on after torqueing down the rocker arms on my 4.2L
engine.
> > I wanted to see if I could tell a difference in this cylinder spark plug
> > wise after the change.
> >
> > Anyway, I'm now hearing a clacking noise when the engine is running. I
> > remembered what someone said about replacing the right components back
in
> > the right place so I took the valve cover back off and changed the
rocker
> > arms around. This seemed to make the sound better but it's still not
> > sounding good.
> >
> > Any ideas on this?
> >
> > Thank you,
> >
> > Bill
01-29-2004, 01:52 AM
#8
Guest
Posts: n/a
Re: engine now making noise
Ok, when I posted this I then had to run out for a class. When I came back 3
hours later I took out and changed the push rods around. Torqued it back
down and it sounded lots better. Either it had time to get the oil in the
lifters or the push rod swap worked. Either way I'm feeling better.
"William Oliveri" <wuji@bigvalley.net> wrote in message
news:bva7qn$q56hf$1@ID-193866.news.uni-berlin.de...
> Nope, checked and double checked those.
>
>
> "L.W. (ßill) ------ III" <----------@***.net> wrote in message
> news:40186F01.3DD47259@***.net...
> > Just make sure you haven't lost a keeper.
> > God Bless America, ßill O|||||||O
> > mailto:-------------------- http://www.----------.com/
> >
> > William Oliveri wrote:
> > >
> > > I completed one cylinder replacing the valve seals and decided to put
> the
> > > valve cover back on after torqueing down the rocker arms on my 4.2L
> engine.
> > > I wanted to see if I could tell a difference in this cylinder spark
plug
> > > wise after the change.
> > >
> > > Anyway, I'm now hearing a clacking noise when the engine is running.
I
> > > remembered what someone said about replacing the right components back
> in
> > > the right place so I took the valve cover back off and changed the
> rocker
> > > arms around. This seemed to make the sound better but it's still not
> > > sounding good.
> > >
> > > Any ideas on this?
> > >
> > > Thank you,
> > >
> > > Bill
>
>
hours later I took out and changed the push rods around. Torqued it back
down and it sounded lots better. Either it had time to get the oil in the
lifters or the push rod swap worked. Either way I'm feeling better.
"William Oliveri" <wuji@bigvalley.net> wrote in message
news:bva7qn$q56hf$1@ID-193866.news.uni-berlin.de...
> Nope, checked and double checked those.
>
>
> "L.W. (ßill) ------ III" <----------@***.net> wrote in message
> news:40186F01.3DD47259@***.net...
> > Just make sure you haven't lost a keeper.
> > God Bless America, ßill O|||||||O
> > mailto:-------------------- http://www.----------.com/
> >
> > William Oliveri wrote:
> > >
> > > I completed one cylinder replacing the valve seals and decided to put
> the
> > > valve cover back on after torqueing down the rocker arms on my 4.2L
> engine.
> > > I wanted to see if I could tell a difference in this cylinder spark
plug
> > > wise after the change.
> > >
> > > Anyway, I'm now hearing a clacking noise when the engine is running.
I
> > > remembered what someone said about replacing the right components back
> in
> > > the right place so I took the valve cover back off and changed the
> rocker
> > > arms around. This seemed to make the sound better but it's still not
> > > sounding good.
> > >
> > > Any ideas on this?
> > >
> > > Thank you,
> > >
> > > Bill
>
>
01-29-2004, 01:52 AM
#9
Guest
Posts: n/a
Re: engine now making noise
Ok, when I posted this I then had to run out for a class. When I came back 3
hours later I took out and changed the push rods around. Torqued it back
down and it sounded lots better. Either it had time to get the oil in the
lifters or the push rod swap worked. Either way I'm feeling better.
"William Oliveri" <wuji@bigvalley.net> wrote in message
news:bva7qn$q56hf$1@ID-193866.news.uni-berlin.de...
> Nope, checked and double checked those.
>
>
> "L.W. (ßill) ------ III" <----------@***.net> wrote in message
> news:40186F01.3DD47259@***.net...
> > Just make sure you haven't lost a keeper.
> > God Bless America, ßill O|||||||O
> > mailto:-------------------- http://www.----------.com/
> >
> > William Oliveri wrote:
> > >
> > > I completed one cylinder replacing the valve seals and decided to put
> the
> > > valve cover back on after torqueing down the rocker arms on my 4.2L
> engine.
> > > I wanted to see if I could tell a difference in this cylinder spark
plug
> > > wise after the change.
> > >
> > > Anyway, I'm now hearing a clacking noise when the engine is running.
I
> > > remembered what someone said about replacing the right components back
> in
> > > the right place so I took the valve cover back off and changed the
> rocker
> > > arms around. This seemed to make the sound better but it's still not
> > > sounding good.
> > >
> > > Any ideas on this?
> > >
> > > Thank you,
> > >
> > > Bill
>
>
hours later I took out and changed the push rods around. Torqued it back
down and it sounded lots better. Either it had time to get the oil in the
lifters or the push rod swap worked. Either way I'm feeling better.
"William Oliveri" <wuji@bigvalley.net> wrote in message
news:bva7qn$q56hf$1@ID-193866.news.uni-berlin.de...
> Nope, checked and double checked those.
>
>
> "L.W. (ßill) ------ III" <----------@***.net> wrote in message
> news:40186F01.3DD47259@***.net...
> > Just make sure you haven't lost a keeper.
> > God Bless America, ßill O|||||||O
> > mailto:-------------------- http://www.----------.com/
> >
> > William Oliveri wrote:
> > >
> > > I completed one cylinder replacing the valve seals and decided to put
> the
> > > valve cover back on after torqueing down the rocker arms on my 4.2L
> engine.
> > > I wanted to see if I could tell a difference in this cylinder spark
plug
> > > wise after the change.
> > >
> > > Anyway, I'm now hearing a clacking noise when the engine is running.
I
> > > remembered what someone said about replacing the right components back
> in
> > > the right place so I took the valve cover back off and changed the
> rocker
> > > arms around. This seemed to make the sound better but it's still not
> > > sounding good.
> > >
> > > Any ideas on this?
> > >
> > > Thank you,
> > >
> > > Bill
>
>
01-29-2004, 01:52 AM
#10
Guest
Posts: n/a
Re: engine now making noise
Ok, when I posted this I then had to run out for a class. When I came back 3
hours later I took out and changed the push rods around. Torqued it back
down and it sounded lots better. Either it had time to get the oil in the
lifters or the push rod swap worked. Either way I'm feeling better.
"William Oliveri" <wuji@bigvalley.net> wrote in message
news:bva7qn$q56hf$1@ID-193866.news.uni-berlin.de...
> Nope, checked and double checked those.
>
>
> "L.W. (ßill) ------ III" <----------@***.net> wrote in message
> news:40186F01.3DD47259@***.net...
> > Just make sure you haven't lost a keeper.
> > God Bless America, ßill O|||||||O
> > mailto:-------------------- http://www.----------.com/
> >
> > William Oliveri wrote:
> > >
> > > I completed one cylinder replacing the valve seals and decided to put
> the
> > > valve cover back on after torqueing down the rocker arms on my 4.2L
> engine.
> > > I wanted to see if I could tell a difference in this cylinder spark
plug
> > > wise after the change.
> > >
> > > Anyway, I'm now hearing a clacking noise when the engine is running.
I
> > > remembered what someone said about replacing the right components back
> in
> > > the right place so I took the valve cover back off and changed the
> rocker
> > > arms around. This seemed to make the sound better but it's still not
> > > sounding good.
> > >
> > > Any ideas on this?
> > >
> > > Thank you,
> > >
> > > Bill
>
>
hours later I took out and changed the push rods around. Torqued it back
down and it sounded lots better. Either it had time to get the oil in the
lifters or the push rod swap worked. Either way I'm feeling better.
"William Oliveri" <wuji@bigvalley.net> wrote in message
news:bva7qn$q56hf$1@ID-193866.news.uni-berlin.de...
> Nope, checked and double checked those.
>
>
> "L.W. (ßill) ------ III" <----------@***.net> wrote in message
> news:40186F01.3DD47259@***.net...
> > Just make sure you haven't lost a keeper.
> > God Bless America, ßill O|||||||O
> > mailto:-------------------- http://www.----------.com/
> >
> > William Oliveri wrote:
> > >
> > > I completed one cylinder replacing the valve seals and decided to put
> the
> > > valve cover back on after torqueing down the rocker arms on my 4.2L
> engine.
> > > I wanted to see if I could tell a difference in this cylinder spark
plug
> > > wise after the change.
> > >
> > > Anyway, I'm now hearing a clacking noise when the engine is running.
I
> > > remembered what someone said about replacing the right components back
> in
> > > the right place so I took the valve cover back off and changed the
> rocker
> > > arms around. This seemed to make the sound better but it's still not
> > > sounding good.
> > >
> > > Any ideas on this?
> > >
> > > Thank you,
> > >
> > > Bill
>
>
