Edelbrock performer manifold/carb/cam kit
#11
Guest
Posts: n/a
Re: Edelbrock performer manifold/carb/cam kit
L.W. (ßill) ------ III did pass the time by typing:
> Quadrajet? Not in my crowd. The sucker was a money maker, though,
> made many house payments with it's goofy way the needle valve worked,
> main jet location insured any contaminate block them, via the filter
> bypass, to even goofier spring tensioned secondary baffle butterflies.
> Instant out of gas sized float bowl. Even the Holley replacement is a
> POS. That carburetor was just an attempt for lower emission, forcing the
> operator run around on tiny tweenie primaries:
Got to agree with Bill on this. My C-10 Chevy had the rochester quadrasuck.
The only thing it was good for is teaching me how to repair/rebuild carbs.
Things went better after I figured out the charcoal canister was barfing
into the carbs vac lines.
--
DougW
> Quadrajet? Not in my crowd. The sucker was a money maker, though,
> made many house payments with it's goofy way the needle valve worked,
> main jet location insured any contaminate block them, via the filter
> bypass, to even goofier spring tensioned secondary baffle butterflies.
> Instant out of gas sized float bowl. Even the Holley replacement is a
> POS. That carburetor was just an attempt for lower emission, forcing the
> operator run around on tiny tweenie primaries:
Got to agree with Bill on this. My C-10 Chevy had the rochester quadrasuck.
The only thing it was good for is teaching me how to repair/rebuild carbs.
Things went better after I figured out the charcoal canister was barfing
into the carbs vac lines.
--
DougW
#12
Guest
Posts: n/a
Re: Edelbrock performer manifold/carb/cam kit
L.W. (ßill) ------ III did pass the time by typing:
> Quadrajet? Not in my crowd. The sucker was a money maker, though,
> made many house payments with it's goofy way the needle valve worked,
> main jet location insured any contaminate block them, via the filter
> bypass, to even goofier spring tensioned secondary baffle butterflies.
> Instant out of gas sized float bowl. Even the Holley replacement is a
> POS. That carburetor was just an attempt for lower emission, forcing the
> operator run around on tiny tweenie primaries:
Got to agree with Bill on this. My C-10 Chevy had the rochester quadrasuck.
The only thing it was good for is teaching me how to repair/rebuild carbs.
Things went better after I figured out the charcoal canister was barfing
into the carbs vac lines.
--
DougW
> Quadrajet? Not in my crowd. The sucker was a money maker, though,
> made many house payments with it's goofy way the needle valve worked,
> main jet location insured any contaminate block them, via the filter
> bypass, to even goofier spring tensioned secondary baffle butterflies.
> Instant out of gas sized float bowl. Even the Holley replacement is a
> POS. That carburetor was just an attempt for lower emission, forcing the
> operator run around on tiny tweenie primaries:
Got to agree with Bill on this. My C-10 Chevy had the rochester quadrasuck.
The only thing it was good for is teaching me how to repair/rebuild carbs.
Things went better after I figured out the charcoal canister was barfing
into the carbs vac lines.
--
DougW
#13
Guest
Posts: n/a
Re: Edelbrock performer manifold/carb/cam kit
L.W. (ßill) ------ III did pass the time by typing:
> Quadrajet? Not in my crowd. The sucker was a money maker, though,
> made many house payments with it's goofy way the needle valve worked,
> main jet location insured any contaminate block them, via the filter
> bypass, to even goofier spring tensioned secondary baffle butterflies.
> Instant out of gas sized float bowl. Even the Holley replacement is a
> POS. That carburetor was just an attempt for lower emission, forcing the
> operator run around on tiny tweenie primaries:
Got to agree with Bill on this. My C-10 Chevy had the rochester quadrasuck.
The only thing it was good for is teaching me how to repair/rebuild carbs.
Things went better after I figured out the charcoal canister was barfing
into the carbs vac lines.
--
DougW
> Quadrajet? Not in my crowd. The sucker was a money maker, though,
> made many house payments with it's goofy way the needle valve worked,
> main jet location insured any contaminate block them, via the filter
> bypass, to even goofier spring tensioned secondary baffle butterflies.
> Instant out of gas sized float bowl. Even the Holley replacement is a
> POS. That carburetor was just an attempt for lower emission, forcing the
> operator run around on tiny tweenie primaries:
Got to agree with Bill on this. My C-10 Chevy had the rochester quadrasuck.
The only thing it was good for is teaching me how to repair/rebuild carbs.
Things went better after I figured out the charcoal canister was barfing
into the carbs vac lines.
--
DougW
#14
Guest
Posts: n/a
Re: Edelbrock performer manifold/carb/cam kit
I made an awesome roar when you opened the secondaries, trouble is
you didn't go any faster, just made lots of noise.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
DougW wrote:
>
> Got to agree with Bill on this. My C-10 Chevy had the rochester quadrasuck.
> The only thing it was good for is teaching me how to repair/rebuild carbs.
>
> Things went better after I figured out the charcoal canister was barfing
> into the carbs vac lines.
>
> --
> DougW
you didn't go any faster, just made lots of noise.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
DougW wrote:
>
> Got to agree with Bill on this. My C-10 Chevy had the rochester quadrasuck.
> The only thing it was good for is teaching me how to repair/rebuild carbs.
>
> Things went better after I figured out the charcoal canister was barfing
> into the carbs vac lines.
>
> --
> DougW
#15
Guest
Posts: n/a
Re: Edelbrock performer manifold/carb/cam kit
I made an awesome roar when you opened the secondaries, trouble is
you didn't go any faster, just made lots of noise.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
DougW wrote:
>
> Got to agree with Bill on this. My C-10 Chevy had the rochester quadrasuck.
> The only thing it was good for is teaching me how to repair/rebuild carbs.
>
> Things went better after I figured out the charcoal canister was barfing
> into the carbs vac lines.
>
> --
> DougW
you didn't go any faster, just made lots of noise.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
DougW wrote:
>
> Got to agree with Bill on this. My C-10 Chevy had the rochester quadrasuck.
> The only thing it was good for is teaching me how to repair/rebuild carbs.
>
> Things went better after I figured out the charcoal canister was barfing
> into the carbs vac lines.
>
> --
> DougW
#16
Guest
Posts: n/a
Re: Edelbrock performer manifold/carb/cam kit
I made an awesome roar when you opened the secondaries, trouble is
you didn't go any faster, just made lots of noise.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
DougW wrote:
>
> Got to agree with Bill on this. My C-10 Chevy had the rochester quadrasuck.
> The only thing it was good for is teaching me how to repair/rebuild carbs.
>
> Things went better after I figured out the charcoal canister was barfing
> into the carbs vac lines.
>
> --
> DougW
you didn't go any faster, just made lots of noise.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
DougW wrote:
>
> Got to agree with Bill on this. My C-10 Chevy had the rochester quadrasuck.
> The only thing it was good for is teaching me how to repair/rebuild carbs.
>
> Things went better after I figured out the charcoal canister was barfing
> into the carbs vac lines.
>
> --
> DougW
#17
Guest
Posts: n/a
Re: Edelbrock performer manifold/carb/cam kit
On Fri, 24 Oct 2003 15:03:24 -0700, L.W.(ßill) ------ III
<----------@***.net> shared the following:
> I made an awesome roar when you opened the secondaries,
Why did you make an awesome roar when the secondaries opened?
*chuckle*
trouble is
>you didn't go any faster, just made lots of noise.
> God Bless America, ßill O|||||||O
>mailto:-------------------- http://www.----------.com/
>
>DougW wrote:
>>
>> Got to agree with Bill on this. My C-10 Chevy had the rochester quadrasuck.
>> The only thing it was good for is teaching me how to repair/rebuild carbs.
>>
>> Things went better after I figured out the charcoal canister was barfing
>> into the carbs vac lines.
>>
>> --
>> DougW
--
Travis
http://jeepadventures.dyndns.org/jeep.html
The meek shall inherit the earth. After I'm finished with it.
:wq!
<----------@***.net> shared the following:
> I made an awesome roar when you opened the secondaries,
Why did you make an awesome roar when the secondaries opened?
*chuckle*
trouble is
>you didn't go any faster, just made lots of noise.
> God Bless America, ßill O|||||||O
>mailto:-------------------- http://www.----------.com/
>
>DougW wrote:
>>
>> Got to agree with Bill on this. My C-10 Chevy had the rochester quadrasuck.
>> The only thing it was good for is teaching me how to repair/rebuild carbs.
>>
>> Things went better after I figured out the charcoal canister was barfing
>> into the carbs vac lines.
>>
>> --
>> DougW
--
Travis
http://jeepadventures.dyndns.org/jeep.html
The meek shall inherit the earth. After I'm finished with it.
:wq!
#18
Guest
Posts: n/a
Re: Edelbrock performer manifold/carb/cam kit
On Fri, 24 Oct 2003 15:03:24 -0700, L.W.(ßill) ------ III
<----------@***.net> shared the following:
> I made an awesome roar when you opened the secondaries,
Why did you make an awesome roar when the secondaries opened?
*chuckle*
trouble is
>you didn't go any faster, just made lots of noise.
> God Bless America, ßill O|||||||O
>mailto:-------------------- http://www.----------.com/
>
>DougW wrote:
>>
>> Got to agree with Bill on this. My C-10 Chevy had the rochester quadrasuck.
>> The only thing it was good for is teaching me how to repair/rebuild carbs.
>>
>> Things went better after I figured out the charcoal canister was barfing
>> into the carbs vac lines.
>>
>> --
>> DougW
--
Travis
http://jeepadventures.dyndns.org/jeep.html
The meek shall inherit the earth. After I'm finished with it.
:wq!
<----------@***.net> shared the following:
> I made an awesome roar when you opened the secondaries,
Why did you make an awesome roar when the secondaries opened?
*chuckle*
trouble is
>you didn't go any faster, just made lots of noise.
> God Bless America, ßill O|||||||O
>mailto:-------------------- http://www.----------.com/
>
>DougW wrote:
>>
>> Got to agree with Bill on this. My C-10 Chevy had the rochester quadrasuck.
>> The only thing it was good for is teaching me how to repair/rebuild carbs.
>>
>> Things went better after I figured out the charcoal canister was barfing
>> into the carbs vac lines.
>>
>> --
>> DougW
--
Travis
http://jeepadventures.dyndns.org/jeep.html
The meek shall inherit the earth. After I'm finished with it.
:wq!
#19
Guest
Posts: n/a
Re: Edelbrock performer manifold/carb/cam kit
On Fri, 24 Oct 2003 15:03:24 -0700, L.W.(ßill) ------ III
<----------@***.net> shared the following:
> I made an awesome roar when you opened the secondaries,
Why did you make an awesome roar when the secondaries opened?
*chuckle*
trouble is
>you didn't go any faster, just made lots of noise.
> God Bless America, ßill O|||||||O
>mailto:-------------------- http://www.----------.com/
>
>DougW wrote:
>>
>> Got to agree with Bill on this. My C-10 Chevy had the rochester quadrasuck.
>> The only thing it was good for is teaching me how to repair/rebuild carbs.
>>
>> Things went better after I figured out the charcoal canister was barfing
>> into the carbs vac lines.
>>
>> --
>> DougW
--
Travis
http://jeepadventures.dyndns.org/jeep.html
The meek shall inherit the earth. After I'm finished with it.
:wq!
<----------@***.net> shared the following:
> I made an awesome roar when you opened the secondaries,
Why did you make an awesome roar when the secondaries opened?
*chuckle*
trouble is
>you didn't go any faster, just made lots of noise.
> God Bless America, ßill O|||||||O
>mailto:-------------------- http://www.----------.com/
>
>DougW wrote:
>>
>> Got to agree with Bill on this. My C-10 Chevy had the rochester quadrasuck.
>> The only thing it was good for is teaching me how to repair/rebuild carbs.
>>
>> Things went better after I figured out the charcoal canister was barfing
>> into the carbs vac lines.
>>
>> --
>> DougW
--
Travis
http://jeepadventures.dyndns.org/jeep.html
The meek shall inherit the earth. After I'm finished with it.
:wq!
#20
Guest
Posts: n/a
Re: Edelbrock performer manifold/carb/cam kit
I and It look the same to me.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
travis wrote:
>
> Why did you make an awesome roar when the secondaries opened?
> *chuckle*
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
travis wrote:
>
> Why did you make an awesome roar when the secondaries opened?
> *chuckle*