edelbrock intake question
07-08-2004, 07:17 AM
#21
Guest
Posts: n/a
Re: edelbrock intake question
> you stated. That's the one I have and I really like it. I also purchased
> the cam that goes with it. I've just recently installed the Holley
> Projection Fuel Injection kit in my CJ and would highly recommend it.
I have a Mild edelbrock carb, and it recommends the EDL 2131 (performer)
intake. It is a dual plane, idle to 5500 rpm. Where did you get the holley
kit and how much was it?
--
_____________________
HomeBrewer
85CJ7 (in Progress)
http://85cj7.blogspot.com/
99XJ Sport
Remove the xxx to reply!
> the cam that goes with it. I've just recently installed the Holley
> Projection Fuel Injection kit in my CJ and would highly recommend it.
I have a Mild edelbrock carb, and it recommends the EDL 2131 (performer)
intake. It is a dual plane, idle to 5500 rpm. Where did you get the holley
kit and how much was it?
--
_____________________
HomeBrewer
85CJ7 (in Progress)
http://85cj7.blogspot.com/
99XJ Sport
Remove the xxx to reply!
07-08-2004, 07:25 AM
#22
Guest
Posts: n/a
Re: edelbrock intake question
> I have a Mild edelbrock carb, and it recommends the EDL 2131 (performer)
I meant mild edelbrock "CAM" not carb.....
--
_____________________
HomeBrewer
85CJ7 (in Progress)
http://85cj7.blogspot.com/
99XJ Sport
Remove the xxx to reply!
I meant mild edelbrock "CAM" not carb.....
--
_____________________
HomeBrewer
85CJ7 (in Progress)
http://85cj7.blogspot.com/
99XJ Sport
Remove the xxx to reply!
07-08-2004, 07:25 AM
#23
Guest
Posts: n/a
Re: edelbrock intake question
> I have a Mild edelbrock carb, and it recommends the EDL 2131 (performer)
I meant mild edelbrock "CAM" not carb.....
--
_____________________
HomeBrewer
85CJ7 (in Progress)
http://85cj7.blogspot.com/
99XJ Sport
Remove the xxx to reply!
I meant mild edelbrock "CAM" not carb.....
--
_____________________
HomeBrewer
85CJ7 (in Progress)
http://85cj7.blogspot.com/
99XJ Sport
Remove the xxx to reply!
07-08-2004, 07:25 AM
#24
Guest
Posts: n/a
Re: edelbrock intake question
> I have a Mild edelbrock carb, and it recommends the EDL 2131 (performer)
I meant mild edelbrock "CAM" not carb.....
--
_____________________
HomeBrewer
85CJ7 (in Progress)
http://85cj7.blogspot.com/
99XJ Sport
Remove the xxx to reply!
I meant mild edelbrock "CAM" not carb.....
--
_____________________
HomeBrewer
85CJ7 (in Progress)
http://85cj7.blogspot.com/
99XJ Sport
Remove the xxx to reply!
07-08-2004, 07:25 AM
#25
Guest
Posts: n/a
Re: edelbrock intake question
> I have a Mild edelbrock carb, and it recommends the EDL 2131 (performer)
I meant mild edelbrock "CAM" not carb.....
--
_____________________
HomeBrewer
85CJ7 (in Progress)
http://85cj7.blogspot.com/
99XJ Sport
Remove the xxx to reply!
I meant mild edelbrock "CAM" not carb.....
--
_____________________
HomeBrewer
85CJ7 (in Progress)
http://85cj7.blogspot.com/
99XJ Sport
Remove the xxx to reply!
07-08-2004, 08:15 AM
#26
Guest
Posts: n/a
Re: edelbrock intake question
No problem. As for the fuel injection kit you can get a new one from Jegs
or Summit Racing and I think they want around $750-$800. I can't remember.
Believe it or not, Advance Auto Parts actually had the least expensive price
that I found while researching it. I bought a used one on Ebay for $500.
It had never been installed and all parts were still in the sealed
containers. It took a while but if you are not in a hurry and want to save
a little $ then Ebay is the way to go. They usually have 4 or 5 for sale
each week. The first time you go wheelin' with a carb and the trail gets a
bit rough while climbing you'll wish you had fuel injection. I had an
Edelbrock 600 cfm carb with the spring loaded needle and seat and it didn't
work at all. Everytime I tried to climb a hill with a few bumps it stalled
at the worst time.
Anyway, sorry for the rambling. Good luck and let me know if you have any
questions.
Casey Teague
www.justjeepz.com
"HomeBrewer" <t3e871XXX@earthlink.net> wrote in message
news:2l3pntF8cc93U1@uni-berlin.de...
> Thanks for the info!
>
> --
> _____________________
> HomeBrewer
> 85CJ7 (in Progress)
> http://85cj7.blogspot.com/
> 99XJ Sport
> Remove the xxx to reply!
>
>
or Summit Racing and I think they want around $750-$800. I can't remember.
Believe it or not, Advance Auto Parts actually had the least expensive price
that I found while researching it. I bought a used one on Ebay for $500.
It had never been installed and all parts were still in the sealed
containers. It took a while but if you are not in a hurry and want to save
a little $ then Ebay is the way to go. They usually have 4 or 5 for sale
each week. The first time you go wheelin' with a carb and the trail gets a
bit rough while climbing you'll wish you had fuel injection. I had an
Edelbrock 600 cfm carb with the spring loaded needle and seat and it didn't
work at all. Everytime I tried to climb a hill with a few bumps it stalled
at the worst time.
Anyway, sorry for the rambling. Good luck and let me know if you have any
questions.
Casey Teague
www.justjeepz.com
"HomeBrewer" <t3e871XXX@earthlink.net> wrote in message
news:2l3pntF8cc93U1@uni-berlin.de...
> Thanks for the info!
>
> --
> _____________________
> HomeBrewer
> 85CJ7 (in Progress)
> http://85cj7.blogspot.com/
> 99XJ Sport
> Remove the xxx to reply!
>
>
07-08-2004, 08:15 AM
#27
Guest
Posts: n/a
Re: edelbrock intake question
No problem. As for the fuel injection kit you can get a new one from Jegs
or Summit Racing and I think they want around $750-$800. I can't remember.
Believe it or not, Advance Auto Parts actually had the least expensive price
that I found while researching it. I bought a used one on Ebay for $500.
It had never been installed and all parts were still in the sealed
containers. It took a while but if you are not in a hurry and want to save
a little $ then Ebay is the way to go. They usually have 4 or 5 for sale
each week. The first time you go wheelin' with a carb and the trail gets a
bit rough while climbing you'll wish you had fuel injection. I had an
Edelbrock 600 cfm carb with the spring loaded needle and seat and it didn't
work at all. Everytime I tried to climb a hill with a few bumps it stalled
at the worst time.
Anyway, sorry for the rambling. Good luck and let me know if you have any
questions.
Casey Teague
www.justjeepz.com
"HomeBrewer" <t3e871XXX@earthlink.net> wrote in message
news:2l3pntF8cc93U1@uni-berlin.de...
> Thanks for the info!
>
> --
> _____________________
> HomeBrewer
> 85CJ7 (in Progress)
> http://85cj7.blogspot.com/
> 99XJ Sport
> Remove the xxx to reply!
>
>
or Summit Racing and I think they want around $750-$800. I can't remember.
Believe it or not, Advance Auto Parts actually had the least expensive price
that I found while researching it. I bought a used one on Ebay for $500.
It had never been installed and all parts were still in the sealed
containers. It took a while but if you are not in a hurry and want to save
a little $ then Ebay is the way to go. They usually have 4 or 5 for sale
each week. The first time you go wheelin' with a carb and the trail gets a
bit rough while climbing you'll wish you had fuel injection. I had an
Edelbrock 600 cfm carb with the spring loaded needle and seat and it didn't
work at all. Everytime I tried to climb a hill with a few bumps it stalled
at the worst time.
Anyway, sorry for the rambling. Good luck and let me know if you have any
questions.
Casey Teague
www.justjeepz.com
"HomeBrewer" <t3e871XXX@earthlink.net> wrote in message
news:2l3pntF8cc93U1@uni-berlin.de...
> Thanks for the info!
>
> --
> _____________________
> HomeBrewer
> 85CJ7 (in Progress)
> http://85cj7.blogspot.com/
> 99XJ Sport
> Remove the xxx to reply!
>
>
07-08-2004, 08:15 AM
#28
Guest
Posts: n/a
Re: edelbrock intake question
No problem. As for the fuel injection kit you can get a new one from Jegs
or Summit Racing and I think they want around $750-$800. I can't remember.
Believe it or not, Advance Auto Parts actually had the least expensive price
that I found while researching it. I bought a used one on Ebay for $500.
It had never been installed and all parts were still in the sealed
containers. It took a while but if you are not in a hurry and want to save
a little $ then Ebay is the way to go. They usually have 4 or 5 for sale
each week. The first time you go wheelin' with a carb and the trail gets a
bit rough while climbing you'll wish you had fuel injection. I had an
Edelbrock 600 cfm carb with the spring loaded needle and seat and it didn't
work at all. Everytime I tried to climb a hill with a few bumps it stalled
at the worst time.
Anyway, sorry for the rambling. Good luck and let me know if you have any
questions.
Casey Teague
www.justjeepz.com
"HomeBrewer" <t3e871XXX@earthlink.net> wrote in message
news:2l3pntF8cc93U1@uni-berlin.de...
> Thanks for the info!
>
> --
> _____________________
> HomeBrewer
> 85CJ7 (in Progress)
> http://85cj7.blogspot.com/
> 99XJ Sport
> Remove the xxx to reply!
>
>
or Summit Racing and I think they want around $750-$800. I can't remember.
Believe it or not, Advance Auto Parts actually had the least expensive price
that I found while researching it. I bought a used one on Ebay for $500.
It had never been installed and all parts were still in the sealed
containers. It took a while but if you are not in a hurry and want to save
a little $ then Ebay is the way to go. They usually have 4 or 5 for sale
each week. The first time you go wheelin' with a carb and the trail gets a
bit rough while climbing you'll wish you had fuel injection. I had an
Edelbrock 600 cfm carb with the spring loaded needle and seat and it didn't
work at all. Everytime I tried to climb a hill with a few bumps it stalled
at the worst time.
Anyway, sorry for the rambling. Good luck and let me know if you have any
questions.
Casey Teague
www.justjeepz.com
"HomeBrewer" <t3e871XXX@earthlink.net> wrote in message
news:2l3pntF8cc93U1@uni-berlin.de...
> Thanks for the info!
>
> --
> _____________________
> HomeBrewer
> 85CJ7 (in Progress)
> http://85cj7.blogspot.com/
> 99XJ Sport
> Remove the xxx to reply!
>
>
07-08-2004, 08:15 AM
#29
Guest
Posts: n/a
Re: edelbrock intake question
No problem. As for the fuel injection kit you can get a new one from Jegs
or Summit Racing and I think they want around $750-$800. I can't remember.
Believe it or not, Advance Auto Parts actually had the least expensive price
that I found while researching it. I bought a used one on Ebay for $500.
It had never been installed and all parts were still in the sealed
containers. It took a while but if you are not in a hurry and want to save
a little $ then Ebay is the way to go. They usually have 4 or 5 for sale
each week. The first time you go wheelin' with a carb and the trail gets a
bit rough while climbing you'll wish you had fuel injection. I had an
Edelbrock 600 cfm carb with the spring loaded needle and seat and it didn't
work at all. Everytime I tried to climb a hill with a few bumps it stalled
at the worst time.
Anyway, sorry for the rambling. Good luck and let me know if you have any
questions.
Casey Teague
www.justjeepz.com
"HomeBrewer" <t3e871XXX@earthlink.net> wrote in message
news:2l3pntF8cc93U1@uni-berlin.de...
> Thanks for the info!
>
> --
> _____________________
> HomeBrewer
> 85CJ7 (in Progress)
> http://85cj7.blogspot.com/
> 99XJ Sport
> Remove the xxx to reply!
>
>
or Summit Racing and I think they want around $750-$800. I can't remember.
Believe it or not, Advance Auto Parts actually had the least expensive price
that I found while researching it. I bought a used one on Ebay for $500.
It had never been installed and all parts were still in the sealed
containers. It took a while but if you are not in a hurry and want to save
a little $ then Ebay is the way to go. They usually have 4 or 5 for sale
each week. The first time you go wheelin' with a carb and the trail gets a
bit rough while climbing you'll wish you had fuel injection. I had an
Edelbrock 600 cfm carb with the spring loaded needle and seat and it didn't
work at all. Everytime I tried to climb a hill with a few bumps it stalled
at the worst time.
Anyway, sorry for the rambling. Good luck and let me know if you have any
questions.
Casey Teague
www.justjeepz.com
"HomeBrewer" <t3e871XXX@earthlink.net> wrote in message
news:2l3pntF8cc93U1@uni-berlin.de...
> Thanks for the info!
>
> --
> _____________________
> HomeBrewer
> 85CJ7 (in Progress)
> http://85cj7.blogspot.com/
> 99XJ Sport
> Remove the xxx to reply!
>
>
Thread
Thread Starter
Forum
Replies
Last Post
drwoodberry@hotmail.com
Jeep Mailing List
0
11-30-2005 04:23 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)