Re: Early Jeep Question for Bill Hughes (or anyone else who knows answer)
 

>From: "CRWLR"

>One other way to attack this Robert is to pull the parts and go to a bearing
>distributor. They can take measurements and derive a part number by working
>backwards. I have had reasonably good luck at my local NAPA outlet doing
>this.

Per Bill's suggestion, I contacted John at Border Parts in Spring Valley CA.
He is familiar with the WWII Willys MBT and Bantam BT3 jeep trailers, also the
Korean War era M-100. Not only that, he has everything I need in stock.
Genuine Timken and Spicer, no imported junk. Good customer service and very
reasonable prices. (Even if I did tell him that I know Bill.)

Bill was correct. John is a great source for "real jeep" parts.

Border Parts
3875 Bancroft Dr
Spring Valley, CA 91977
619-461-0075


Robert Bills
KG6LMV
Orange County CA

http://www.outdoorwire.com/4x4/jeep/...p-l/billsr.htm
http://www.RobertBills.com

Re: Early Jeep Question for Bill Hughes (or anyone else who knows answer)
 

>From: "CRWLR"

>One other way to attack this Robert is to pull the parts and go to a bearing
>distributor. They can take measurements and derive a part number by working
>backwards. I have had reasonably good luck at my local NAPA outlet doing
>this.

Per Bill's suggestion, I contacted John at Border Parts in Spring Valley CA.
He is familiar with the WWII Willys MBT and Bantam BT3 jeep trailers, also the
Korean War era M-100. Not only that, he has everything I need in stock.
Genuine Timken and Spicer, no imported junk. Good customer service and very
reasonable prices. (Even if I did tell him that I know Bill.)

Bill was correct. John is a great source for "real jeep" parts.

Border Parts
3875 Bancroft Dr
Spring Valley, CA 91977
619-461-0075


Robert Bills
KG6LMV
Orange County CA

http://www.outdoorwire.com/4x4/jeep/...p-l/billsr.htm
http://www.RobertBills.com

Re: Early Jeep Question for Bill Hughes (or anyone else who knows answer)
 

>From: "CRWLR"

>One other way to attack this Robert is to pull the parts and go to a bearing
>distributor. They can take measurements and derive a part number by working
>backwards. I have had reasonably good luck at my local NAPA outlet doing
>this.

Per Bill's suggestion, I contacted John at Border Parts in Spring Valley CA.
He is familiar with the WWII Willys MBT and Bantam BT3 jeep trailers, also the
Korean War era M-100. Not only that, he has everything I need in stock.
Genuine Timken and Spicer, no imported junk. Good customer service and very
reasonable prices. (Even if I did tell him that I know Bill.)

Bill was correct. John is a great source for "real jeep" parts.

Border Parts
3875 Bancroft Dr
Spring Valley, CA 91977
619-461-0075


Robert Bills
KG6LMV
Orange County CA

http://www.outdoorwire.com/4x4/jeep/...p-l/billsr.htm
http://www.RobertBills.com

Re: Early Jeep Question for Bill Hughes (or anyone else who knowsanswer)
 

LOL I did know him way before I owned a Jeep, along with other over
educated draft dodgers attending San Diego State, early sixties.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/

Robert Bills wrote:
>
> Per Bill's suggestion, I contacted John at Border Parts in Spring Valley CA.
> He is familiar with the WWII Willys MBT and Bantam BT3 jeep trailers, also the
> Korean War era M-100. Not only that, he has everything I need in stock.
> Genuine Timken and Spicer, no imported junk. Good customer service and very
> reasonable prices. (Even if I did tell him that I know Bill.)
>
> Bill was correct. John is a great source for "real jeep" parts.
>
> Border Parts
> 3875 Bancroft Dr
> Spring Valley, CA 91977
> 619-461-0075
>
> Robert Bills
> KG6LMV
> Orange County CA
>
> http://www.outdoorwire.com/4x4/jeep/...p-l/billsr.htm
> http://www.RobertBills.com

Re: Early Jeep Question for Bill Hughes (or anyone else who knowsanswer)
 

LOL I did know him way before I owned a Jeep, along with other over
educated draft dodgers attending San Diego State, early sixties.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/

Robert Bills wrote:
>
> Per Bill's suggestion, I contacted John at Border Parts in Spring Valley CA.
> He is familiar with the WWII Willys MBT and Bantam BT3 jeep trailers, also the
> Korean War era M-100. Not only that, he has everything I need in stock.
> Genuine Timken and Spicer, no imported junk. Good customer service and very
> reasonable prices. (Even if I did tell him that I know Bill.)
>
> Bill was correct. John is a great source for "real jeep" parts.
>
> Border Parts
> 3875 Bancroft Dr
> Spring Valley, CA 91977
> 619-461-0075
>
> Robert Bills
> KG6LMV
> Orange County CA
>
> http://www.outdoorwire.com/4x4/jeep/...p-l/billsr.htm
> http://www.RobertBills.com

Re: Early Jeep Question for Bill Hughes (or anyone else who knowsanswer)
 

LOL I did know him way before I owned a Jeep, along with other over
educated draft dodgers attending San Diego State, early sixties.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/

Robert Bills wrote:
>
> Per Bill's suggestion, I contacted John at Border Parts in Spring Valley CA.
> He is familiar with the WWII Willys MBT and Bantam BT3 jeep trailers, also the
> Korean War era M-100. Not only that, he has everything I need in stock.
> Genuine Timken and Spicer, no imported junk. Good customer service and very
> reasonable prices. (Even if I did tell him that I know Bill.)
>
> Bill was correct. John is a great source for "real jeep" parts.
>
> Border Parts
> 3875 Bancroft Dr
> Spring Valley, CA 91977
> 619-461-0075
>
> Robert Bills
> KG6LMV
> Orange County CA
>
> http://www.outdoorwire.com/4x4/jeep/...p-l/billsr.htm
> http://www.RobertBills.com

Re: Early Jeep Question for Bill Hughes (or anyone else who knowsanswer)
 

LOL I did know him way before I owned a Jeep, along with other over
educated draft dodgers attending San Diego State, early sixties.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/

Robert Bills wrote:
>
> Per Bill's suggestion, I contacted John at Border Parts in Spring Valley CA.
> He is familiar with the WWII Willys MBT and Bantam BT3 jeep trailers, also the
> Korean War era M-100. Not only that, he has everything I need in stock.
> Genuine Timken and Spicer, no imported junk. Good customer service and very
> reasonable prices. (Even if I did tell him that I know Bill.)
>
> Bill was correct. John is a great source for "real jeep" parts.
>
> Border Parts
> 3875 Bancroft Dr
> Spring Valley, CA 91977
> 619-461-0075
>
> Robert Bills
> KG6LMV
> Orange County CA
>
> http://www.outdoorwire.com/4x4/jeep/...p-l/billsr.htm
> http://www.RobertBills.com

Re: Early Jeep Question for Bill Hughes (or anyone else who knows answer)
 

John is amazing. I first went in to Border Parts about 8 years ago looking
to rebuild my AMC 20. I told John I wanted to put in a Detroit Locker and
replace all the rest of the guts. Without looking at a book or manual of any
kind he just went to back and started pulling parts from the shelves. He
must have a parts catalog in his head. Whenever I can, I go there for parts.
The place looks dumpy outside but all my buddies at work and I swear by him.
Rich
"L.W. (ßill) ------ III" <----------@cox.net> wrote in message
news:40F5A7E5.52250B00@cox.net...
> LOL I did know him way before I owned a Jeep, along with other over
> educated draft dodgers attending San Diego State, early sixties.
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> Robert Bills wrote:
> >
> > Per Bill's suggestion, I contacted John at Border Parts in Spring Valley
CA.
> > He is familiar with the WWII Willys MBT and Bantam BT3 jeep trailers,
also the
> > Korean War era M-100. Not only that, he has everything I need in stock.
> > Genuine Timken and Spicer, no imported junk. Good customer service and
very
> > reasonable prices. (Even if I did tell him that I know Bill.)
> >
> > Bill was correct. John is a great source for "real jeep" parts.
> >
> > Border Parts
> > 3875 Bancroft Dr
> > Spring Valley, CA 91977
> > 619-461-0075
> >
> > Robert Bills
> > KG6LMV
> > Orange County CA
> >
> > http://www.outdoorwire.com/4x4/jeep/...p-l/billsr.htm
> > http://www.RobertBills.com

Re: Early Jeep Question for Bill Hughes (or anyone else who knows answer)
 

John is amazing. I first went in to Border Parts about 8 years ago looking
to rebuild my AMC 20. I told John I wanted to put in a Detroit Locker and
replace all the rest of the guts. Without looking at a book or manual of any
kind he just went to back and started pulling parts from the shelves. He
must have a parts catalog in his head. Whenever I can, I go there for parts.
The place looks dumpy outside but all my buddies at work and I swear by him.
Rich
"L.W. (ßill) ------ III" <----------@cox.net> wrote in message
news:40F5A7E5.52250B00@cox.net...
> LOL I did know him way before I owned a Jeep, along with other over
> educated draft dodgers attending San Diego State, early sixties.
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> Robert Bills wrote:
> >
> > Per Bill's suggestion, I contacted John at Border Parts in Spring Valley
CA.
> > He is familiar with the WWII Willys MBT and Bantam BT3 jeep trailers,
also the
> > Korean War era M-100. Not only that, he has everything I need in stock.
> > Genuine Timken and Spicer, no imported junk. Good customer service and
very
> > reasonable prices. (Even if I did tell him that I know Bill.)
> >
> > Bill was correct. John is a great source for "real jeep" parts.
> >
> > Border Parts
> > 3875 Bancroft Dr
> > Spring Valley, CA 91977
> > 619-461-0075
> >
> > Robert Bills
> > KG6LMV
> > Orange County CA
> >
> > http://www.outdoorwire.com/4x4/jeep/...p-l/billsr.htm
> > http://www.RobertBills.com

Re: Early Jeep Question for Bill Hughes (or anyone else who knows answer)
 

John is amazing. I first went in to Border Parts about 8 years ago looking
to rebuild my AMC 20. I told John I wanted to put in a Detroit Locker and
replace all the rest of the guts. Without looking at a book or manual of any
kind he just went to back and started pulling parts from the shelves. He
must have a parts catalog in his head. Whenever I can, I go there for parts.
The place looks dumpy outside but all my buddies at work and I swear by him.
Rich
"L.W. (ßill) ------ III" <----------@cox.net> wrote in message
news:40F5A7E5.52250B00@cox.net...
> LOL I did know him way before I owned a Jeep, along with other over
> educated draft dodgers attending San Diego State, early sixties.
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> Robert Bills wrote:
> >
> > Per Bill's suggestion, I contacted John at Border Parts in Spring Valley
CA.
> > He is familiar with the WWII Willys MBT and Bantam BT3 jeep trailers,
also the
> > Korean War era M-100. Not only that, he has everything I need in stock.
> > Genuine Timken and Spicer, no imported junk. Good customer service and
very
> > reasonable prices. (Even if I did tell him that I know Bill.)
> >
> > Bill was correct. John is a great source for "real jeep" parts.
> >
> > Border Parts
> > 3875 Bancroft Dr
> > Spring Valley, CA 91977
> > 619-461-0075
> >
> > Robert Bills
> > KG6LMV
> > Orange County CA
> >
> > http://www.outdoorwire.com/4x4/jeep/...p-l/billsr.htm
> > http://www.RobertBills.com