Early CJ frame boxed?
#1
Guest
Posts: n/a
Early CJ frame boxed?
I stopped to look at the remains of what the owner thought to be a CJ2A
with a flat-head four in place. I noticed that the frame sections
visable through where the rear floor used to be were factory boxed with
3" or so round cutouts along the inner box side, and these looked
factory, not like some kid with a welder and a hole saw made them. The
windshield frame wasn't attached and might not go with the vehicle, but
it is the CJ3A style with the center vent panel.
Did either CJ2s or CJ3s have boxed rear frame rails?
#2
Guest
Posts: n/a
Re: Early CJ frame boxed?
Hi Lee,
Nope, open channel riveted together to drain and flex:
http://www.----------.com/CJ2frame.jpg Just like the big trucks:
http://www.----------.com/kenworthframe.jpg
God Bless America, ßill O|||||||O
mailto:--------------------
Lee Ayrton wrote:
>
> I stopped to look at the remains of what the owner thought to be a CJ2A
> with a flat-head four in place. I noticed that the frame sections
> visable through where the rear floor used to be were factory boxed with
> 3" or so round cutouts along the inner box side, and these looked
> factory, not like some kid with a welder and a hole saw made them. The
> windshield frame wasn't attached and might not go with the vehicle, but
> it is the CJ3A style with the center vent panel.
>
> Did either CJ2s or CJ3s have boxed rear frame rails?
Nope, open channel riveted together to drain and flex:
http://www.----------.com/CJ2frame.jpg Just like the big trucks:
http://www.----------.com/kenworthframe.jpg
God Bless America, ßill O|||||||O
mailto:--------------------
Lee Ayrton wrote:
>
> I stopped to look at the remains of what the owner thought to be a CJ2A
> with a flat-head four in place. I noticed that the frame sections
> visable through where the rear floor used to be were factory boxed with
> 3" or so round cutouts along the inner box side, and these looked
> factory, not like some kid with a welder and a hole saw made them. The
> windshield frame wasn't attached and might not go with the vehicle, but
> it is the CJ3A style with the center vent panel.
>
> Did either CJ2s or CJ3s have boxed rear frame rails?
#3
Guest
Posts: n/a
Re: Early CJ frame boxed?
Hi Lee,
Nope, open channel riveted together to drain and flex:
http://www.----------.com/CJ2frame.jpg Just like the big trucks:
http://www.----------.com/kenworthframe.jpg
God Bless America, ßill O|||||||O
mailto:--------------------
Lee Ayrton wrote:
>
> I stopped to look at the remains of what the owner thought to be a CJ2A
> with a flat-head four in place. I noticed that the frame sections
> visable through where the rear floor used to be were factory boxed with
> 3" or so round cutouts along the inner box side, and these looked
> factory, not like some kid with a welder and a hole saw made them. The
> windshield frame wasn't attached and might not go with the vehicle, but
> it is the CJ3A style with the center vent panel.
>
> Did either CJ2s or CJ3s have boxed rear frame rails?
Nope, open channel riveted together to drain and flex:
http://www.----------.com/CJ2frame.jpg Just like the big trucks:
http://www.----------.com/kenworthframe.jpg
God Bless America, ßill O|||||||O
mailto:--------------------
Lee Ayrton wrote:
>
> I stopped to look at the remains of what the owner thought to be a CJ2A
> with a flat-head four in place. I noticed that the frame sections
> visable through where the rear floor used to be were factory boxed with
> 3" or so round cutouts along the inner box side, and these looked
> factory, not like some kid with a welder and a hole saw made them. The
> windshield frame wasn't attached and might not go with the vehicle, but
> it is the CJ3A style with the center vent panel.
>
> Did either CJ2s or CJ3s have boxed rear frame rails?
#4
Guest
Posts: n/a
Re: Early CJ frame boxed?
Hi Lee,
Nope, open channel riveted together to drain and flex:
http://www.----------.com/CJ2frame.jpg Just like the big trucks:
http://www.----------.com/kenworthframe.jpg
God Bless America, ßill O|||||||O
mailto:--------------------
Lee Ayrton wrote:
>
> I stopped to look at the remains of what the owner thought to be a CJ2A
> with a flat-head four in place. I noticed that the frame sections
> visable through where the rear floor used to be were factory boxed with
> 3" or so round cutouts along the inner box side, and these looked
> factory, not like some kid with a welder and a hole saw made them. The
> windshield frame wasn't attached and might not go with the vehicle, but
> it is the CJ3A style with the center vent panel.
>
> Did either CJ2s or CJ3s have boxed rear frame rails?
Nope, open channel riveted together to drain and flex:
http://www.----------.com/CJ2frame.jpg Just like the big trucks:
http://www.----------.com/kenworthframe.jpg
God Bless America, ßill O|||||||O
mailto:--------------------
Lee Ayrton wrote:
>
> I stopped to look at the remains of what the owner thought to be a CJ2A
> with a flat-head four in place. I noticed that the frame sections
> visable through where the rear floor used to be were factory boxed with
> 3" or so round cutouts along the inner box side, and these looked
> factory, not like some kid with a welder and a hole saw made them. The
> windshield frame wasn't attached and might not go with the vehicle, but
> it is the CJ3A style with the center vent panel.
>
> Did either CJ2s or CJ3s have boxed rear frame rails?
#5
Guest
Posts: n/a
Re: Early CJ frame boxed?
Hi Lee,
Nope, open channel riveted together to drain and flex:
http://www.----------.com/CJ2frame.jpg Just like the big trucks:
http://www.----------.com/kenworthframe.jpg
God Bless America, ßill O|||||||O
mailto:--------------------
Lee Ayrton wrote:
>
> I stopped to look at the remains of what the owner thought to be a CJ2A
> with a flat-head four in place. I noticed that the frame sections
> visable through where the rear floor used to be were factory boxed with
> 3" or so round cutouts along the inner box side, and these looked
> factory, not like some kid with a welder and a hole saw made them. The
> windshield frame wasn't attached and might not go with the vehicle, but
> it is the CJ3A style with the center vent panel.
>
> Did either CJ2s or CJ3s have boxed rear frame rails?
Nope, open channel riveted together to drain and flex:
http://www.----------.com/CJ2frame.jpg Just like the big trucks:
http://www.----------.com/kenworthframe.jpg
God Bless America, ßill O|||||||O
mailto:--------------------
Lee Ayrton wrote:
>
> I stopped to look at the remains of what the owner thought to be a CJ2A
> with a flat-head four in place. I noticed that the frame sections
> visable through where the rear floor used to be were factory boxed with
> 3" or so round cutouts along the inner box side, and these looked
> factory, not like some kid with a welder and a hole saw made them. The
> windshield frame wasn't attached and might not go with the vehicle, but
> it is the CJ3A style with the center vent panel.
>
> Did either CJ2s or CJ3s have boxed rear frame rails?
#6
Guest
Posts: n/a
Re: Early CJ frame boxed?
Thanks for the links.
The part of the frame that I could see that was boxed was the section
from the rear cross member forward to where the diagonal hitch brace
meets the frame over the wheel arch, I couldn't see the rest of the
frame. The owner was of the opinion that this marked the frame as a
military version. Does that last sound right to you?
L.W.(Bill) ------ III wrote:
> Hi Lee,
> Nope, open channel riveted together to drain and flex:
> http://www.----------.com/CJ2frame.jpg Just like the big trucks:
> http://www.----------.com/kenworthframe.jpg
> God Bless America, Bill O|||||||O
> mailto:--------------------
>
> Lee Ayrton wrote:
>
>>I stopped to look at the remains of what the owner thought to be a CJ2A
>>with a flat-head four in place. I noticed that the frame sections
>>visable through where the rear floor used to be were factory boxed with
>>3" or so round cutouts along the inner box side, and these looked
>>factory, not like some kid with a welder and a hole saw made them. The
>>windshield frame wasn't attached and might not go with the vehicle, but
>>it is the CJ3A style with the center vent panel.
>>
>>Did either CJ2s or CJ3s have boxed rear frame rails?
#7
Guest
Posts: n/a
Re: Early CJ frame boxed?
Thanks for the links.
The part of the frame that I could see that was boxed was the section
from the rear cross member forward to where the diagonal hitch brace
meets the frame over the wheel arch, I couldn't see the rest of the
frame. The owner was of the opinion that this marked the frame as a
military version. Does that last sound right to you?
L.W.(Bill) ------ III wrote:
> Hi Lee,
> Nope, open channel riveted together to drain and flex:
> http://www.----------.com/CJ2frame.jpg Just like the big trucks:
> http://www.----------.com/kenworthframe.jpg
> God Bless America, Bill O|||||||O
> mailto:--------------------
>
> Lee Ayrton wrote:
>
>>I stopped to look at the remains of what the owner thought to be a CJ2A
>>with a flat-head four in place. I noticed that the frame sections
>>visable through where the rear floor used to be were factory boxed with
>>3" or so round cutouts along the inner box side, and these looked
>>factory, not like some kid with a welder and a hole saw made them. The
>>windshield frame wasn't attached and might not go with the vehicle, but
>>it is the CJ3A style with the center vent panel.
>>
>>Did either CJ2s or CJ3s have boxed rear frame rails?
#8
Guest
Posts: n/a
Re: Early CJ frame boxed?
Thanks for the links.
The part of the frame that I could see that was boxed was the section
from the rear cross member forward to where the diagonal hitch brace
meets the frame over the wheel arch, I couldn't see the rest of the
frame. The owner was of the opinion that this marked the frame as a
military version. Does that last sound right to you?
L.W.(Bill) ------ III wrote:
> Hi Lee,
> Nope, open channel riveted together to drain and flex:
> http://www.----------.com/CJ2frame.jpg Just like the big trucks:
> http://www.----------.com/kenworthframe.jpg
> God Bless America, Bill O|||||||O
> mailto:--------------------
>
> Lee Ayrton wrote:
>
>>I stopped to look at the remains of what the owner thought to be a CJ2A
>>with a flat-head four in place. I noticed that the frame sections
>>visable through where the rear floor used to be were factory boxed with
>>3" or so round cutouts along the inner box side, and these looked
>>factory, not like some kid with a welder and a hole saw made them. The
>>windshield frame wasn't attached and might not go with the vehicle, but
>>it is the CJ3A style with the center vent panel.
>>
>>Did either CJ2s or CJ3s have boxed rear frame rails?
#9
Guest
Posts: n/a
Re: Early CJ frame boxed?
Thanks for the links.
The part of the frame that I could see that was boxed was the section
from the rear cross member forward to where the diagonal hitch brace
meets the frame over the wheel arch, I couldn't see the rest of the
frame. The owner was of the opinion that this marked the frame as a
military version. Does that last sound right to you?
L.W.(Bill) ------ III wrote:
> Hi Lee,
> Nope, open channel riveted together to drain and flex:
> http://www.----------.com/CJ2frame.jpg Just like the big trucks:
> http://www.----------.com/kenworthframe.jpg
> God Bless America, Bill O|||||||O
> mailto:--------------------
>
> Lee Ayrton wrote:
>
>>I stopped to look at the remains of what the owner thought to be a CJ2A
>>with a flat-head four in place. I noticed that the frame sections
>>visable through where the rear floor used to be were factory boxed with
>>3" or so round cutouts along the inner box side, and these looked
>>factory, not like some kid with a welder and a hole saw made them. The
>>windshield frame wasn't attached and might not go with the vehicle, but
>>it is the CJ3A style with the center vent panel.
>>
>>Did either CJ2s or CJ3s have boxed rear frame rails?
#10
Guest
Posts: n/a
Re: Early CJ frame boxed?
Ah. Found a picture of what I was wondering about:
<URL:http://i21.ebayimg.com/04/i/04/97/4d/64_3.JPG>
You can see what I was looking at just to the left of the steering
column in the picture. And here, all along the rear wheel arch.
<URL:http://i22.ebayimg.com/04/i/04/9e/13/a8_3.JPG>
Photos from this eBay listing. I've nothing to do with his auction, the
URL is included so others can retrace my steps.
<URL:http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=4565599042&photoDispla yType=2#ebayphotohosting>
Lee Ayrton wrote:
>
> Thanks for the links.
>
> The part of the frame that I could see that was boxed was the section
> from the rear cross member forward to where the diagonal hitch brace
> meets the frame over the wheel arch, I couldn't see the rest of the
> frame. The owner was of the opinion that this marked the frame as a
> military version. Does that last sound right to you?
>
>
>
> L.W.(Bill) ------ III wrote:
>
>> Hi Lee,
>> Nope, open channel riveted together to drain and flex:
>> http://www.----------.com/CJ2frame.jpg Just like the big trucks:
>> http://www.----------.com/kenworthframe.jpg God Bless America,
>> Bill O|||||||O
>> mailto:--------------------
>> Lee Ayrton wrote:
>>
>>> I stopped to look at the remains of what the owner thought to be a CJ2A
>>> with a flat-head four in place. I noticed that the frame sections
>>> visable through where the rear floor used to be were factory boxed with
>>> 3" or so round cutouts along the inner box side, and these looked
>>> factory, not like some kid with a welder and a hole saw made them. The
>>> windshield frame wasn't attached and might not go with the vehicle, but
>>> it is the CJ3A style with the center vent panel.
>>>
>>> Did either CJ2s or CJ3s have boxed rear frame rails?