driveline vibes
04-23-2007, 10:42 PM
#2
Guest
Posts: n/a
Re: driveline vibes
On 23 Apr 2007 16:47:44 -0700, j <johnhuebner@yahoo.com> wrote:
>i downsized the tires to 31s from 33s. now o get a vibration in 5
>gear at 2400 rpm, it rattles the keys. suggestions?
When you get to 55 MPH does it still do it when clutch is pressing to
floor? If so it you and balanced tires, you likely either have a bad
Ujoint, bad Ujoint angles (theses can create a lot of vibrations) or
a drive shaft that is not balanced.
-----------------
TheSnoMan.com
>i downsized the tires to 31s from 33s. now o get a vibration in 5
>gear at 2400 rpm, it rattles the keys. suggestions?
When you get to 55 MPH does it still do it when clutch is pressing to
floor? If so it you and balanced tires, you likely either have a bad
Ujoint, bad Ujoint angles (theses can create a lot of vibrations) or
a drive shaft that is not balanced.
-----------------
TheSnoMan.com
04-23-2007, 10:42 PM
#3
Guest
Posts: n/a
Re: driveline vibes
On 23 Apr 2007 16:47:44 -0700, j <johnhuebner@yahoo.com> wrote:
>i downsized the tires to 31s from 33s. now o get a vibration in 5
>gear at 2400 rpm, it rattles the keys. suggestions?
When you get to 55 MPH does it still do it when clutch is pressing to
floor? If so it you and balanced tires, you likely either have a bad
Ujoint, bad Ujoint angles (theses can create a lot of vibrations) or
a drive shaft that is not balanced.
-----------------
TheSnoMan.com
>i downsized the tires to 31s from 33s. now o get a vibration in 5
>gear at 2400 rpm, it rattles the keys. suggestions?
When you get to 55 MPH does it still do it when clutch is pressing to
floor? If so it you and balanced tires, you likely either have a bad
Ujoint, bad Ujoint angles (theses can create a lot of vibrations) or
a drive shaft that is not balanced.
-----------------
TheSnoMan.com
04-23-2007, 10:42 PM
#4
Guest
Posts: n/a
Re: driveline vibes
On 23 Apr 2007 16:47:44 -0700, j <johnhuebner@yahoo.com> wrote:
>i downsized the tires to 31s from 33s. now o get a vibration in 5
>gear at 2400 rpm, it rattles the keys. suggestions?
When you get to 55 MPH does it still do it when clutch is pressing to
floor? If so it you and balanced tires, you likely either have a bad
Ujoint, bad Ujoint angles (theses can create a lot of vibrations) or
a drive shaft that is not balanced.
-----------------
TheSnoMan.com
>i downsized the tires to 31s from 33s. now o get a vibration in 5
>gear at 2400 rpm, it rattles the keys. suggestions?
When you get to 55 MPH does it still do it when clutch is pressing to
floor? If so it you and balanced tires, you likely either have a bad
Ujoint, bad Ujoint angles (theses can create a lot of vibrations) or
a drive shaft that is not balanced.
-----------------
TheSnoMan.com
04-23-2007, 10:42 PM
#5
Guest
Posts: n/a
Re: driveline vibes
On 23 Apr 2007 16:47:44 -0700, j <johnhuebner@yahoo.com> wrote:
>i downsized the tires to 31s from 33s. now o get a vibration in 5
>gear at 2400 rpm, it rattles the keys. suggestions?
When you get to 55 MPH does it still do it when clutch is pressing to
floor? If so it you and balanced tires, you likely either have a bad
Ujoint, bad Ujoint angles (theses can create a lot of vibrations) or
a drive shaft that is not balanced.
-----------------
TheSnoMan.com
>i downsized the tires to 31s from 33s. now o get a vibration in 5
>gear at 2400 rpm, it rattles the keys. suggestions?
When you get to 55 MPH does it still do it when clutch is pressing to
floor? If so it you and balanced tires, you likely either have a bad
Ujoint, bad Ujoint angles (theses can create a lot of vibrations) or
a drive shaft that is not balanced.
-----------------
TheSnoMan.com
04-24-2007, 09:02 AM
#6
Guest
Posts: n/a
Re: driveline vibes
j wrote:
> 1995 wrangler with a 2.5, tom wood cv shaft, tera sye ford 8.8
>
> i downsized the tires to 31s from 33s. now o get a vibration in 5
> gear at 2400 rpm, it rattles the keys. suggestions?
>
Well, changing tires won't suddenly affect driveline angles or the new
CV joints so I would suspect one of the tires is out of balance or our
of round or one of the rims is bad.
You could try rotating the tires to see if the vibration changes place.
While doing that I recommend a hand spin of each tire to see if it is
obviously out of round or has a bulge.
How fast are the tires spinning when the vibe happens? 5th and 2400 is
kinda meaningless without knowing the gears and tranny ratios. On mine,
2400 in 5th would be about 85 mph.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Canadian Off Road Trips Photos: Non members can still view!
Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
(More Off Road album links at bottom of the view page)
> 1995 wrangler with a 2.5, tom wood cv shaft, tera sye ford 8.8
>
> i downsized the tires to 31s from 33s. now o get a vibration in 5
> gear at 2400 rpm, it rattles the keys. suggestions?
>
Well, changing tires won't suddenly affect driveline angles or the new
CV joints so I would suspect one of the tires is out of balance or our
of round or one of the rims is bad.
You could try rotating the tires to see if the vibration changes place.
While doing that I recommend a hand spin of each tire to see if it is
obviously out of round or has a bulge.
How fast are the tires spinning when the vibe happens? 5th and 2400 is
kinda meaningless without knowing the gears and tranny ratios. On mine,
2400 in 5th would be about 85 mph.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Canadian Off Road Trips Photos: Non members can still view!
Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
(More Off Road album links at bottom of the view page)
04-24-2007, 09:02 AM
#7
Guest
Posts: n/a
Re: driveline vibes
j wrote:
> 1995 wrangler with a 2.5, tom wood cv shaft, tera sye ford 8.8
>
> i downsized the tires to 31s from 33s. now o get a vibration in 5
> gear at 2400 rpm, it rattles the keys. suggestions?
>
Well, changing tires won't suddenly affect driveline angles or the new
CV joints so I would suspect one of the tires is out of balance or our
of round or one of the rims is bad.
You could try rotating the tires to see if the vibration changes place.
While doing that I recommend a hand spin of each tire to see if it is
obviously out of round or has a bulge.
How fast are the tires spinning when the vibe happens? 5th and 2400 is
kinda meaningless without knowing the gears and tranny ratios. On mine,
2400 in 5th would be about 85 mph.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Canadian Off Road Trips Photos: Non members can still view!
Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
(More Off Road album links at bottom of the view page)
> 1995 wrangler with a 2.5, tom wood cv shaft, tera sye ford 8.8
>
> i downsized the tires to 31s from 33s. now o get a vibration in 5
> gear at 2400 rpm, it rattles the keys. suggestions?
>
Well, changing tires won't suddenly affect driveline angles or the new
CV joints so I would suspect one of the tires is out of balance or our
of round or one of the rims is bad.
You could try rotating the tires to see if the vibration changes place.
While doing that I recommend a hand spin of each tire to see if it is
obviously out of round or has a bulge.
How fast are the tires spinning when the vibe happens? 5th and 2400 is
kinda meaningless without knowing the gears and tranny ratios. On mine,
2400 in 5th would be about 85 mph.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Canadian Off Road Trips Photos: Non members can still view!
Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
(More Off Road album links at bottom of the view page)
04-24-2007, 09:02 AM
#8
Guest
Posts: n/a
Re: driveline vibes
j wrote:
> 1995 wrangler with a 2.5, tom wood cv shaft, tera sye ford 8.8
>
> i downsized the tires to 31s from 33s. now o get a vibration in 5
> gear at 2400 rpm, it rattles the keys. suggestions?
>
Well, changing tires won't suddenly affect driveline angles or the new
CV joints so I would suspect one of the tires is out of balance or our
of round or one of the rims is bad.
You could try rotating the tires to see if the vibration changes place.
While doing that I recommend a hand spin of each tire to see if it is
obviously out of round or has a bulge.
How fast are the tires spinning when the vibe happens? 5th and 2400 is
kinda meaningless without knowing the gears and tranny ratios. On mine,
2400 in 5th would be about 85 mph.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Canadian Off Road Trips Photos: Non members can still view!
Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
(More Off Road album links at bottom of the view page)
> 1995 wrangler with a 2.5, tom wood cv shaft, tera sye ford 8.8
>
> i downsized the tires to 31s from 33s. now o get a vibration in 5
> gear at 2400 rpm, it rattles the keys. suggestions?
>
Well, changing tires won't suddenly affect driveline angles or the new
CV joints so I would suspect one of the tires is out of balance or our
of round or one of the rims is bad.
You could try rotating the tires to see if the vibration changes place.
While doing that I recommend a hand spin of each tire to see if it is
obviously out of round or has a bulge.
How fast are the tires spinning when the vibe happens? 5th and 2400 is
kinda meaningless without knowing the gears and tranny ratios. On mine,
2400 in 5th would be about 85 mph.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Canadian Off Road Trips Photos: Non members can still view!
Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
(More Off Road album links at bottom of the view page)
04-24-2007, 09:02 AM
#9
Guest
Posts: n/a
Re: driveline vibes
j wrote:
> 1995 wrangler with a 2.5, tom wood cv shaft, tera sye ford 8.8
>
> i downsized the tires to 31s from 33s. now o get a vibration in 5
> gear at 2400 rpm, it rattles the keys. suggestions?
>
Well, changing tires won't suddenly affect driveline angles or the new
CV joints so I would suspect one of the tires is out of balance or our
of round or one of the rims is bad.
You could try rotating the tires to see if the vibration changes place.
While doing that I recommend a hand spin of each tire to see if it is
obviously out of round or has a bulge.
How fast are the tires spinning when the vibe happens? 5th and 2400 is
kinda meaningless without knowing the gears and tranny ratios. On mine,
2400 in 5th would be about 85 mph.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Canadian Off Road Trips Photos: Non members can still view!
Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
(More Off Road album links at bottom of the view page)
> 1995 wrangler with a 2.5, tom wood cv shaft, tera sye ford 8.8
>
> i downsized the tires to 31s from 33s. now o get a vibration in 5
> gear at 2400 rpm, it rattles the keys. suggestions?
>
Well, changing tires won't suddenly affect driveline angles or the new
CV joints so I would suspect one of the tires is out of balance or our
of round or one of the rims is bad.
You could try rotating the tires to see if the vibration changes place.
While doing that I recommend a hand spin of each tire to see if it is
obviously out of round or has a bulge.
How fast are the tires spinning when the vibe happens? 5th and 2400 is
kinda meaningless without knowing the gears and tranny ratios. On mine,
2400 in 5th would be about 85 mph.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Canadian Off Road Trips Photos: Non members can still view!
Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
(More Off Road album links at bottom of the view page)
04-24-2007, 10:02 AM
#10
Guest
Posts: n/a
Re: Re: driveline vibes
On Tue, 24 Apr 2007 09:02:24 -0400, Mike Romain <romainm@sympatico.ca>
wrote:
> On mine,
>2400 in 5th would be about 85 mph.
I am not surprized that you think that tall gears with big tires are a
great combo and 2400 at 85 is cool. And you try to pass yourself off
as a expert too, Shame!!!! Not surprize coming for someone that tells
people to spin the tires is reverse while in 4x4 to remove drivetrain
stress. You are all show and no know.
-----------------
TheSnoMan.com
wrote:
> On mine,
>2400 in 5th would be about 85 mph.
I am not surprized that you think that tall gears with big tires are a
great combo and 2400 at 85 is cool. And you try to pass yourself off
as a expert too, Shame!!!! Not surprize coming for someone that tells
people to spin the tires is reverse while in 4x4 to remove drivetrain
stress. You are all show and no know.
-----------------
TheSnoMan.com
