driveline vibes
#21
Guest
Posts: n/a
Re: driveline vibes
On Apr 23, 6:47 pm, j <johnhueb...@yahoo.com> wrote:
> 1995 wrangler with a 2.5, tom wood cv shaft, tera sye ford 8.8
>
> i downsized the tires to 31s from 33s. now o get a vibration in 5
> gear at 2400 rpm, it rattles the keys. suggestions?
If the only change you made was the tires then you need to suspect
that before anything else. Probably just need to balance. Did you
change rims too? If so, suspect them also.
> 1995 wrangler with a 2.5, tom wood cv shaft, tera sye ford 8.8
>
> i downsized the tires to 31s from 33s. now o get a vibration in 5
> gear at 2400 rpm, it rattles the keys. suggestions?
If the only change you made was the tires then you need to suspect
that before anything else. Probably just need to balance. Did you
change rims too? If so, suspect them also.
#22
Guest
Posts: n/a
Re: driveline vibes
"nrs" <neale_rs@yahoo.com> wrote in message
news:1177428437.212102.311130@r35g2000prh.googlegr oups.com...
> On Apr 23, 6:47 pm, j <johnhueb...@yahoo.com> wrote:
> > 1995 wrangler with a 2.5, tom wood cv shaft, tera sye ford 8.8
> >
> > i downsized the tires to 31s from 33s. now o get a vibration in 5
> > gear at 2400 rpm, it rattles the keys. suggestions?
>
> If the only change you made was the tires then you need to suspect
> that before anything else. Probably just need to balance. Did you
> change rims too? If so, suspect them also.
>
I would tend to agree with this but the tire size change would also have
changed his cruising speed driveshaft rotational velocity. This could have
exacerbated any pre-existing driveline alignment problem. It does sound
like a front tire slightly out of balance. A quick and dirty diagnostic is
to rotate the tires. If the noise goes away then back to the tire shop to
get them all balanced.
Earle
news:1177428437.212102.311130@r35g2000prh.googlegr oups.com...
> On Apr 23, 6:47 pm, j <johnhueb...@yahoo.com> wrote:
> > 1995 wrangler with a 2.5, tom wood cv shaft, tera sye ford 8.8
> >
> > i downsized the tires to 31s from 33s. now o get a vibration in 5
> > gear at 2400 rpm, it rattles the keys. suggestions?
>
> If the only change you made was the tires then you need to suspect
> that before anything else. Probably just need to balance. Did you
> change rims too? If so, suspect them also.
>
I would tend to agree with this but the tire size change would also have
changed his cruising speed driveshaft rotational velocity. This could have
exacerbated any pre-existing driveline alignment problem. It does sound
like a front tire slightly out of balance. A quick and dirty diagnostic is
to rotate the tires. If the noise goes away then back to the tire shop to
get them all balanced.
Earle
#23
Guest
Posts: n/a
Re: driveline vibes
"nrs" <neale_rs@yahoo.com> wrote in message
news:1177428437.212102.311130@r35g2000prh.googlegr oups.com...
> On Apr 23, 6:47 pm, j <johnhueb...@yahoo.com> wrote:
> > 1995 wrangler with a 2.5, tom wood cv shaft, tera sye ford 8.8
> >
> > i downsized the tires to 31s from 33s. now o get a vibration in 5
> > gear at 2400 rpm, it rattles the keys. suggestions?
>
> If the only change you made was the tires then you need to suspect
> that before anything else. Probably just need to balance. Did you
> change rims too? If so, suspect them also.
>
I would tend to agree with this but the tire size change would also have
changed his cruising speed driveshaft rotational velocity. This could have
exacerbated any pre-existing driveline alignment problem. It does sound
like a front tire slightly out of balance. A quick and dirty diagnostic is
to rotate the tires. If the noise goes away then back to the tire shop to
get them all balanced.
Earle
news:1177428437.212102.311130@r35g2000prh.googlegr oups.com...
> On Apr 23, 6:47 pm, j <johnhueb...@yahoo.com> wrote:
> > 1995 wrangler with a 2.5, tom wood cv shaft, tera sye ford 8.8
> >
> > i downsized the tires to 31s from 33s. now o get a vibration in 5
> > gear at 2400 rpm, it rattles the keys. suggestions?
>
> If the only change you made was the tires then you need to suspect
> that before anything else. Probably just need to balance. Did you
> change rims too? If so, suspect them also.
>
I would tend to agree with this but the tire size change would also have
changed his cruising speed driveshaft rotational velocity. This could have
exacerbated any pre-existing driveline alignment problem. It does sound
like a front tire slightly out of balance. A quick and dirty diagnostic is
to rotate the tires. If the noise goes away then back to the tire shop to
get them all balanced.
Earle
#24
Guest
Posts: n/a
Re: driveline vibes
"nrs" <neale_rs@yahoo.com> wrote in message
news:1177428437.212102.311130@r35g2000prh.googlegr oups.com...
> On Apr 23, 6:47 pm, j <johnhueb...@yahoo.com> wrote:
> > 1995 wrangler with a 2.5, tom wood cv shaft, tera sye ford 8.8
> >
> > i downsized the tires to 31s from 33s. now o get a vibration in 5
> > gear at 2400 rpm, it rattles the keys. suggestions?
>
> If the only change you made was the tires then you need to suspect
> that before anything else. Probably just need to balance. Did you
> change rims too? If so, suspect them also.
>
I would tend to agree with this but the tire size change would also have
changed his cruising speed driveshaft rotational velocity. This could have
exacerbated any pre-existing driveline alignment problem. It does sound
like a front tire slightly out of balance. A quick and dirty diagnostic is
to rotate the tires. If the noise goes away then back to the tire shop to
get them all balanced.
Earle
news:1177428437.212102.311130@r35g2000prh.googlegr oups.com...
> On Apr 23, 6:47 pm, j <johnhueb...@yahoo.com> wrote:
> > 1995 wrangler with a 2.5, tom wood cv shaft, tera sye ford 8.8
> >
> > i downsized the tires to 31s from 33s. now o get a vibration in 5
> > gear at 2400 rpm, it rattles the keys. suggestions?
>
> If the only change you made was the tires then you need to suspect
> that before anything else. Probably just need to balance. Did you
> change rims too? If so, suspect them also.
>
I would tend to agree with this but the tire size change would also have
changed his cruising speed driveshaft rotational velocity. This could have
exacerbated any pre-existing driveline alignment problem. It does sound
like a front tire slightly out of balance. A quick and dirty diagnostic is
to rotate the tires. If the noise goes away then back to the tire shop to
get them all balanced.
Earle
#25
Guest
Posts: n/a
Re: driveline vibes
"nrs" <neale_rs@yahoo.com> wrote in message
news:1177428437.212102.311130@r35g2000prh.googlegr oups.com...
> On Apr 23, 6:47 pm, j <johnhueb...@yahoo.com> wrote:
> > 1995 wrangler with a 2.5, tom wood cv shaft, tera sye ford 8.8
> >
> > i downsized the tires to 31s from 33s. now o get a vibration in 5
> > gear at 2400 rpm, it rattles the keys. suggestions?
>
> If the only change you made was the tires then you need to suspect
> that before anything else. Probably just need to balance. Did you
> change rims too? If so, suspect them also.
>
I would tend to agree with this but the tire size change would also have
changed his cruising speed driveshaft rotational velocity. This could have
exacerbated any pre-existing driveline alignment problem. It does sound
like a front tire slightly out of balance. A quick and dirty diagnostic is
to rotate the tires. If the noise goes away then back to the tire shop to
get them all balanced.
Earle
news:1177428437.212102.311130@r35g2000prh.googlegr oups.com...
> On Apr 23, 6:47 pm, j <johnhueb...@yahoo.com> wrote:
> > 1995 wrangler with a 2.5, tom wood cv shaft, tera sye ford 8.8
> >
> > i downsized the tires to 31s from 33s. now o get a vibration in 5
> > gear at 2400 rpm, it rattles the keys. suggestions?
>
> If the only change you made was the tires then you need to suspect
> that before anything else. Probably just need to balance. Did you
> change rims too? If so, suspect them also.
>
I would tend to agree with this but the tire size change would also have
changed his cruising speed driveshaft rotational velocity. This could have
exacerbated any pre-existing driveline alignment problem. It does sound
like a front tire slightly out of balance. A quick and dirty diagnostic is
to rotate the tires. If the noise goes away then back to the tire shop to
get them all balanced.
Earle
#26
Guest
Posts: n/a
Re: Re: driveline vibes
<PLONK>
Mike, I know how infuriating SnoTool is, but do us all a favor and ignore
him, eventually he will go away.
"SnoMan" <admin@snoman.com> wrote in message
news:pa3s231le6a0qgg4jcsolllk70h74tgeub@4ax.com...
> On Tue, 24 Apr 2007 09:02:24 -0400, Mike Romain <romainm@sympatico.ca>
> wrote:
>
>> On mine,
>>2400 in 5th would be about 85 mph.
>
> I am not surprized that you think that tall gears with big tires are a
> great combo and 2400 at 85 is cool. And you try to pass yourself off
> as a expert too, Shame!!!! Not surprize coming for someone that tells
> people to spin the tires is reverse while in 4x4 to remove drivetrain
> stress. You are all show and no know.
> -----------------
> TheSnoMan.com
Mike, I know how infuriating SnoTool is, but do us all a favor and ignore
him, eventually he will go away.
"SnoMan" <admin@snoman.com> wrote in message
news:pa3s231le6a0qgg4jcsolllk70h74tgeub@4ax.com...
> On Tue, 24 Apr 2007 09:02:24 -0400, Mike Romain <romainm@sympatico.ca>
> wrote:
>
>> On mine,
>>2400 in 5th would be about 85 mph.
>
> I am not surprized that you think that tall gears with big tires are a
> great combo and 2400 at 85 is cool. And you try to pass yourself off
> as a expert too, Shame!!!! Not surprize coming for someone that tells
> people to spin the tires is reverse while in 4x4 to remove drivetrain
> stress. You are all show and no know.
> -----------------
> TheSnoMan.com
#27
Guest
Posts: n/a
Re: Re: driveline vibes
<PLONK>
Mike, I know how infuriating SnoTool is, but do us all a favor and ignore
him, eventually he will go away.
"SnoMan" <admin@snoman.com> wrote in message
news:pa3s231le6a0qgg4jcsolllk70h74tgeub@4ax.com...
> On Tue, 24 Apr 2007 09:02:24 -0400, Mike Romain <romainm@sympatico.ca>
> wrote:
>
>> On mine,
>>2400 in 5th would be about 85 mph.
>
> I am not surprized that you think that tall gears with big tires are a
> great combo and 2400 at 85 is cool. And you try to pass yourself off
> as a expert too, Shame!!!! Not surprize coming for someone that tells
> people to spin the tires is reverse while in 4x4 to remove drivetrain
> stress. You are all show and no know.
> -----------------
> TheSnoMan.com
Mike, I know how infuriating SnoTool is, but do us all a favor and ignore
him, eventually he will go away.
"SnoMan" <admin@snoman.com> wrote in message
news:pa3s231le6a0qgg4jcsolllk70h74tgeub@4ax.com...
> On Tue, 24 Apr 2007 09:02:24 -0400, Mike Romain <romainm@sympatico.ca>
> wrote:
>
>> On mine,
>>2400 in 5th would be about 85 mph.
>
> I am not surprized that you think that tall gears with big tires are a
> great combo and 2400 at 85 is cool. And you try to pass yourself off
> as a expert too, Shame!!!! Not surprize coming for someone that tells
> people to spin the tires is reverse while in 4x4 to remove drivetrain
> stress. You are all show and no know.
> -----------------
> TheSnoMan.com
#28
Guest
Posts: n/a
Re: Re: driveline vibes
<PLONK>
Mike, I know how infuriating SnoTool is, but do us all a favor and ignore
him, eventually he will go away.
"SnoMan" <admin@snoman.com> wrote in message
news:pa3s231le6a0qgg4jcsolllk70h74tgeub@4ax.com...
> On Tue, 24 Apr 2007 09:02:24 -0400, Mike Romain <romainm@sympatico.ca>
> wrote:
>
>> On mine,
>>2400 in 5th would be about 85 mph.
>
> I am not surprized that you think that tall gears with big tires are a
> great combo and 2400 at 85 is cool. And you try to pass yourself off
> as a expert too, Shame!!!! Not surprize coming for someone that tells
> people to spin the tires is reverse while in 4x4 to remove drivetrain
> stress. You are all show and no know.
> -----------------
> TheSnoMan.com
Mike, I know how infuriating SnoTool is, but do us all a favor and ignore
him, eventually he will go away.
"SnoMan" <admin@snoman.com> wrote in message
news:pa3s231le6a0qgg4jcsolllk70h74tgeub@4ax.com...
> On Tue, 24 Apr 2007 09:02:24 -0400, Mike Romain <romainm@sympatico.ca>
> wrote:
>
>> On mine,
>>2400 in 5th would be about 85 mph.
>
> I am not surprized that you think that tall gears with big tires are a
> great combo and 2400 at 85 is cool. And you try to pass yourself off
> as a expert too, Shame!!!! Not surprize coming for someone that tells
> people to spin the tires is reverse while in 4x4 to remove drivetrain
> stress. You are all show and no know.
> -----------------
> TheSnoMan.com
#29
Guest
Posts: n/a
Re: Re: driveline vibes
<PLONK>
Mike, I know how infuriating SnoTool is, but do us all a favor and ignore
him, eventually he will go away.
"SnoMan" <admin@snoman.com> wrote in message
news:pa3s231le6a0qgg4jcsolllk70h74tgeub@4ax.com...
> On Tue, 24 Apr 2007 09:02:24 -0400, Mike Romain <romainm@sympatico.ca>
> wrote:
>
>> On mine,
>>2400 in 5th would be about 85 mph.
>
> I am not surprized that you think that tall gears with big tires are a
> great combo and 2400 at 85 is cool. And you try to pass yourself off
> as a expert too, Shame!!!! Not surprize coming for someone that tells
> people to spin the tires is reverse while in 4x4 to remove drivetrain
> stress. You are all show and no know.
> -----------------
> TheSnoMan.com
Mike, I know how infuriating SnoTool is, but do us all a favor and ignore
him, eventually he will go away.
"SnoMan" <admin@snoman.com> wrote in message
news:pa3s231le6a0qgg4jcsolllk70h74tgeub@4ax.com...
> On Tue, 24 Apr 2007 09:02:24 -0400, Mike Romain <romainm@sympatico.ca>
> wrote:
>
>> On mine,
>>2400 in 5th would be about 85 mph.
>
> I am not surprized that you think that tall gears with big tires are a
> great combo and 2400 at 85 is cool. And you try to pass yourself off
> as a expert too, Shame!!!! Not surprize coming for someone that tells
> people to spin the tires is reverse while in 4x4 to remove drivetrain
> stress. You are all show and no know.
> -----------------
> TheSnoMan.com
#30
Guest
Posts: n/a
Re: Re: driveline vibes
If you don't responded to a personal attack, you're a wimp! And when the
a**hole is wrong, then you're a coward, if you don't correct it!
God Bless America, Bill 0|||||||0
mailto:-------------------- http://www.----------.com/
"Matt Macchiarolo" <matt@nospamplease.com> wrote in message
news:ktidnZlVBv9v9bPbnZ2dnUVZ_jSdnZ2d@comcast.com. ..
> <PLONK>
>
> Mike, I know how infuriating SnoTool is, but do us all a favor and ignore
> him, eventually he will go away.
--
Posted via a free Usenet account from http://www.teranews.com
a**hole is wrong, then you're a coward, if you don't correct it!
God Bless America, Bill 0|||||||0
mailto:-------------------- http://www.----------.com/
"Matt Macchiarolo" <matt@nospamplease.com> wrote in message
news:ktidnZlVBv9v9bPbnZ2dnUVZ_jSdnZ2d@comcast.com. ..
> <PLONK>
>
> Mike, I know how infuriating SnoTool is, but do us all a favor and ignore
> him, eventually he will go away.
--
Posted via a free Usenet account from http://www.teranews.com