Drag link boot cover - '01 TJ
Guest
Posts: n/a
Re: Drag link boot cover - '01 TJ
I was doing some plumbing repairs the other day and came across
something that might work for a while if you can get the outside of
the boot clean. It's a rubber "tape" that self-cures after you get it
on. Plenty flexible, the layers appear to literally grow together and
conform to the surface. Looks like a potential repair for split boots
as it cures really tough but still flexible. For the couple of bucks
they get for it, it would be worth a try. An imporved duct tape? <g>.
On Sat, 30 Sep 2006 02:09:25 UTC "TW" <attw@wave.co.nz (delete this)>
wrote:
> Hi All,
>
> I was under my TJ yesterday for a visual check (just precautionary) and noticed that the rubber boot over the end of the drag link has cracked. This is the tyre end (steering knuckle joint). There is clean grease in it, but the boot needs replacing. The FSM talks about taking the whole drag link off, but do I really need to for changing the boot over the joint? Any pointers. I just don't want to pay mega dollars for labour at a shop where the actual part is only a few dollars (i.e. the rubber boot).
>
> BTW, its a RHD Wrangler (I am in New Zealand).
>
> Thanks
> TW
> ---------
> '01 TJ Renegade 4.0L Auto D30/D44
> 265/75R16 BFG Muds, JKS Quick Discos, OME Lift, 1" MML, 1" BL
>
--
Will Honea
something that might work for a while if you can get the outside of
the boot clean. It's a rubber "tape" that self-cures after you get it
on. Plenty flexible, the layers appear to literally grow together and
conform to the surface. Looks like a potential repair for split boots
as it cures really tough but still flexible. For the couple of bucks
they get for it, it would be worth a try. An imporved duct tape? <g>.
On Sat, 30 Sep 2006 02:09:25 UTC "TW" <attw@wave.co.nz (delete this)>
wrote:
> Hi All,
>
> I was under my TJ yesterday for a visual check (just precautionary) and noticed that the rubber boot over the end of the drag link has cracked. This is the tyre end (steering knuckle joint). There is clean grease in it, but the boot needs replacing. The FSM talks about taking the whole drag link off, but do I really need to for changing the boot over the joint? Any pointers. I just don't want to pay mega dollars for labour at a shop where the actual part is only a few dollars (i.e. the rubber boot).
>
> BTW, its a RHD Wrangler (I am in New Zealand).
>
> Thanks
> TW
> ---------
> '01 TJ Renegade 4.0L Auto D30/D44
> 265/75R16 BFG Muds, JKS Quick Discos, OME Lift, 1" MML, 1" BL
>
--
Will Honea
Guest
Posts: n/a
Re: Drag link boot cover - '01 TJ
I was doing some plumbing repairs the other day and came across
something that might work for a while if you can get the outside of
the boot clean. It's a rubber "tape" that self-cures after you get it
on. Plenty flexible, the layers appear to literally grow together and
conform to the surface. Looks like a potential repair for split boots
as it cures really tough but still flexible. For the couple of bucks
they get for it, it would be worth a try. An imporved duct tape? <g>.
On Sat, 30 Sep 2006 02:09:25 UTC "TW" <attw@wave.co.nz (delete this)>
wrote:
> Hi All,
>
> I was under my TJ yesterday for a visual check (just precautionary) and noticed that the rubber boot over the end of the drag link has cracked. This is the tyre end (steering knuckle joint). There is clean grease in it, but the boot needs replacing. The FSM talks about taking the whole drag link off, but do I really need to for changing the boot over the joint? Any pointers. I just don't want to pay mega dollars for labour at a shop where the actual part is only a few dollars (i.e. the rubber boot).
>
> BTW, its a RHD Wrangler (I am in New Zealand).
>
> Thanks
> TW
> ---------
> '01 TJ Renegade 4.0L Auto D30/D44
> 265/75R16 BFG Muds, JKS Quick Discos, OME Lift, 1" MML, 1" BL
>
--
Will Honea
something that might work for a while if you can get the outside of
the boot clean. It's a rubber "tape" that self-cures after you get it
on. Plenty flexible, the layers appear to literally grow together and
conform to the surface. Looks like a potential repair for split boots
as it cures really tough but still flexible. For the couple of bucks
they get for it, it would be worth a try. An imporved duct tape? <g>.
On Sat, 30 Sep 2006 02:09:25 UTC "TW" <attw@wave.co.nz (delete this)>
wrote:
> Hi All,
>
> I was under my TJ yesterday for a visual check (just precautionary) and noticed that the rubber boot over the end of the drag link has cracked. This is the tyre end (steering knuckle joint). There is clean grease in it, but the boot needs replacing. The FSM talks about taking the whole drag link off, but do I really need to for changing the boot over the joint? Any pointers. I just don't want to pay mega dollars for labour at a shop where the actual part is only a few dollars (i.e. the rubber boot).
>
> BTW, its a RHD Wrangler (I am in New Zealand).
>
> Thanks
> TW
> ---------
> '01 TJ Renegade 4.0L Auto D30/D44
> 265/75R16 BFG Muds, JKS Quick Discos, OME Lift, 1" MML, 1" BL
>
--
Will Honea
Guest
Posts: n/a
Re: Drag link boot cover - '01 TJ
I was doing some plumbing repairs the other day and came across
something that might work for a while if you can get the outside of
the boot clean. It's a rubber "tape" that self-cures after you get it
on. Plenty flexible, the layers appear to literally grow together and
conform to the surface. Looks like a potential repair for split boots
as it cures really tough but still flexible. For the couple of bucks
they get for it, it would be worth a try. An imporved duct tape? <g>.
On Sat, 30 Sep 2006 02:09:25 UTC "TW" <attw@wave.co.nz (delete this)>
wrote:
> Hi All,
>
> I was under my TJ yesterday for a visual check (just precautionary) and noticed that the rubber boot over the end of the drag link has cracked. This is the tyre end (steering knuckle joint). There is clean grease in it, but the boot needs replacing. The FSM talks about taking the whole drag link off, but do I really need to for changing the boot over the joint? Any pointers. I just don't want to pay mega dollars for labour at a shop where the actual part is only a few dollars (i.e. the rubber boot).
>
> BTW, its a RHD Wrangler (I am in New Zealand).
>
> Thanks
> TW
> ---------
> '01 TJ Renegade 4.0L Auto D30/D44
> 265/75R16 BFG Muds, JKS Quick Discos, OME Lift, 1" MML, 1" BL
>
--
Will Honea
something that might work for a while if you can get the outside of
the boot clean. It's a rubber "tape" that self-cures after you get it
on. Plenty flexible, the layers appear to literally grow together and
conform to the surface. Looks like a potential repair for split boots
as it cures really tough but still flexible. For the couple of bucks
they get for it, it would be worth a try. An imporved duct tape? <g>.
On Sat, 30 Sep 2006 02:09:25 UTC "TW" <attw@wave.co.nz (delete this)>
wrote:
> Hi All,
>
> I was under my TJ yesterday for a visual check (just precautionary) and noticed that the rubber boot over the end of the drag link has cracked. This is the tyre end (steering knuckle joint). There is clean grease in it, but the boot needs replacing. The FSM talks about taking the whole drag link off, but do I really need to for changing the boot over the joint? Any pointers. I just don't want to pay mega dollars for labour at a shop where the actual part is only a few dollars (i.e. the rubber boot).
>
> BTW, its a RHD Wrangler (I am in New Zealand).
>
> Thanks
> TW
> ---------
> '01 TJ Renegade 4.0L Auto D30/D44
> 265/75R16 BFG Muds, JKS Quick Discos, OME Lift, 1" MML, 1" BL
>
--
Will Honea
Guest
Posts: n/a
Re: Drag link boot cover - '01 TJ
I have a heavy duty version of that stuff called 'splicing tape', but
know the light stuff too. It might do on some, but can you grease the
TJ's joints? If you can't grease them regularly, then I wouldn't use
it.
I wonder what something like crazy glue or that super weather-strip
adhesive or gorilla snot would do on the split. I have extra boots
around, just no easy way of putting them on, but a split and glue
hmm.....
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Canadian Off Road Trips Photos: Non members can still view!
Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
(More Off Road album links at bottom of the view page)
Will Honea wrote:
>
> I was doing some plumbing repairs the other day and came across
> something that might work for a while if you can get the outside of
> the boot clean. It's a rubber "tape" that self-cures after you get it
> on. Plenty flexible, the layers appear to literally grow together and
> conform to the surface. Looks like a potential repair for split boots
> as it cures really tough but still flexible. For the couple of bucks
> they get for it, it would be worth a try. An imporved duct tape? <g>.
>
> On Sat, 30 Sep 2006 02:09:25 UTC "TW" <attw@wave.co.nz (delete this)>
> wrote:
>
> > Hi All,
> >
> > I was under my TJ yesterday for a visual check (just precautionary) and noticed that the rubber boot over the end of the drag link has cracked. This is the tyre end (steering knuckle joint). There is clean grease in it, but the boot needs replacing. The FSM talks about taking the whole drag link off, but do I really need to for changing the boot over the joint? Any pointers. I just don't want to pay mega dollars for labour at a shop where the actual part is only a few dollars (i.e. the rubber boot).
> >
> > BTW, its a RHD Wrangler (I am in New Zealand).
> >
> > Thanks
> > TW
> > ---------
> > '01 TJ Renegade 4.0L Auto D30/D44
> > 265/75R16 BFG Muds, JKS Quick Discos, OME Lift, 1" MML, 1" BL
> >
>
> --
> Will Honea
know the light stuff too. It might do on some, but can you grease the
TJ's joints? If you can't grease them regularly, then I wouldn't use
it.
I wonder what something like crazy glue or that super weather-strip
adhesive or gorilla snot would do on the split. I have extra boots
around, just no easy way of putting them on, but a split and glue
hmm.....
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Canadian Off Road Trips Photos: Non members can still view!
Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
(More Off Road album links at bottom of the view page)
Will Honea wrote:
>
> I was doing some plumbing repairs the other day and came across
> something that might work for a while if you can get the outside of
> the boot clean. It's a rubber "tape" that self-cures after you get it
> on. Plenty flexible, the layers appear to literally grow together and
> conform to the surface. Looks like a potential repair for split boots
> as it cures really tough but still flexible. For the couple of bucks
> they get for it, it would be worth a try. An imporved duct tape? <g>.
>
> On Sat, 30 Sep 2006 02:09:25 UTC "TW" <attw@wave.co.nz (delete this)>
> wrote:
>
> > Hi All,
> >
> > I was under my TJ yesterday for a visual check (just precautionary) and noticed that the rubber boot over the end of the drag link has cracked. This is the tyre end (steering knuckle joint). There is clean grease in it, but the boot needs replacing. The FSM talks about taking the whole drag link off, but do I really need to for changing the boot over the joint? Any pointers. I just don't want to pay mega dollars for labour at a shop where the actual part is only a few dollars (i.e. the rubber boot).
> >
> > BTW, its a RHD Wrangler (I am in New Zealand).
> >
> > Thanks
> > TW
> > ---------
> > '01 TJ Renegade 4.0L Auto D30/D44
> > 265/75R16 BFG Muds, JKS Quick Discos, OME Lift, 1" MML, 1" BL
> >
>
> --
> Will Honea
Guest
Posts: n/a
Re: Drag link boot cover - '01 TJ
I have a heavy duty version of that stuff called 'splicing tape', but
know the light stuff too. It might do on some, but can you grease the
TJ's joints? If you can't grease them regularly, then I wouldn't use
it.
I wonder what something like crazy glue or that super weather-strip
adhesive or gorilla snot would do on the split. I have extra boots
around, just no easy way of putting them on, but a split and glue
hmm.....
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Canadian Off Road Trips Photos: Non members can still view!
Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
(More Off Road album links at bottom of the view page)
Will Honea wrote:
>
> I was doing some plumbing repairs the other day and came across
> something that might work for a while if you can get the outside of
> the boot clean. It's a rubber "tape" that self-cures after you get it
> on. Plenty flexible, the layers appear to literally grow together and
> conform to the surface. Looks like a potential repair for split boots
> as it cures really tough but still flexible. For the couple of bucks
> they get for it, it would be worth a try. An imporved duct tape? <g>.
>
> On Sat, 30 Sep 2006 02:09:25 UTC "TW" <attw@wave.co.nz (delete this)>
> wrote:
>
> > Hi All,
> >
> > I was under my TJ yesterday for a visual check (just precautionary) and noticed that the rubber boot over the end of the drag link has cracked. This is the tyre end (steering knuckle joint). There is clean grease in it, but the boot needs replacing. The FSM talks about taking the whole drag link off, but do I really need to for changing the boot over the joint? Any pointers. I just don't want to pay mega dollars for labour at a shop where the actual part is only a few dollars (i.e. the rubber boot).
> >
> > BTW, its a RHD Wrangler (I am in New Zealand).
> >
> > Thanks
> > TW
> > ---------
> > '01 TJ Renegade 4.0L Auto D30/D44
> > 265/75R16 BFG Muds, JKS Quick Discos, OME Lift, 1" MML, 1" BL
> >
>
> --
> Will Honea
know the light stuff too. It might do on some, but can you grease the
TJ's joints? If you can't grease them regularly, then I wouldn't use
it.
I wonder what something like crazy glue or that super weather-strip
adhesive or gorilla snot would do on the split. I have extra boots
around, just no easy way of putting them on, but a split and glue
hmm.....
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Canadian Off Road Trips Photos: Non members can still view!
Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
(More Off Road album links at bottom of the view page)
Will Honea wrote:
>
> I was doing some plumbing repairs the other day and came across
> something that might work for a while if you can get the outside of
> the boot clean. It's a rubber "tape" that self-cures after you get it
> on. Plenty flexible, the layers appear to literally grow together and
> conform to the surface. Looks like a potential repair for split boots
> as it cures really tough but still flexible. For the couple of bucks
> they get for it, it would be worth a try. An imporved duct tape? <g>.
>
> On Sat, 30 Sep 2006 02:09:25 UTC "TW" <attw@wave.co.nz (delete this)>
> wrote:
>
> > Hi All,
> >
> > I was under my TJ yesterday for a visual check (just precautionary) and noticed that the rubber boot over the end of the drag link has cracked. This is the tyre end (steering knuckle joint). There is clean grease in it, but the boot needs replacing. The FSM talks about taking the whole drag link off, but do I really need to for changing the boot over the joint? Any pointers. I just don't want to pay mega dollars for labour at a shop where the actual part is only a few dollars (i.e. the rubber boot).
> >
> > BTW, its a RHD Wrangler (I am in New Zealand).
> >
> > Thanks
> > TW
> > ---------
> > '01 TJ Renegade 4.0L Auto D30/D44
> > 265/75R16 BFG Muds, JKS Quick Discos, OME Lift, 1" MML, 1" BL
> >
>
> --
> Will Honea
Guest
Posts: n/a
Re: Drag link boot cover - '01 TJ
I have a heavy duty version of that stuff called 'splicing tape', but
know the light stuff too. It might do on some, but can you grease the
TJ's joints? If you can't grease them regularly, then I wouldn't use
it.
I wonder what something like crazy glue or that super weather-strip
adhesive or gorilla snot would do on the split. I have extra boots
around, just no easy way of putting them on, but a split and glue
hmm.....
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Canadian Off Road Trips Photos: Non members can still view!
Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
(More Off Road album links at bottom of the view page)
Will Honea wrote:
>
> I was doing some plumbing repairs the other day and came across
> something that might work for a while if you can get the outside of
> the boot clean. It's a rubber "tape" that self-cures after you get it
> on. Plenty flexible, the layers appear to literally grow together and
> conform to the surface. Looks like a potential repair for split boots
> as it cures really tough but still flexible. For the couple of bucks
> they get for it, it would be worth a try. An imporved duct tape? <g>.
>
> On Sat, 30 Sep 2006 02:09:25 UTC "TW" <attw@wave.co.nz (delete this)>
> wrote:
>
> > Hi All,
> >
> > I was under my TJ yesterday for a visual check (just precautionary) and noticed that the rubber boot over the end of the drag link has cracked. This is the tyre end (steering knuckle joint). There is clean grease in it, but the boot needs replacing. The FSM talks about taking the whole drag link off, but do I really need to for changing the boot over the joint? Any pointers. I just don't want to pay mega dollars for labour at a shop where the actual part is only a few dollars (i.e. the rubber boot).
> >
> > BTW, its a RHD Wrangler (I am in New Zealand).
> >
> > Thanks
> > TW
> > ---------
> > '01 TJ Renegade 4.0L Auto D30/D44
> > 265/75R16 BFG Muds, JKS Quick Discos, OME Lift, 1" MML, 1" BL
> >
>
> --
> Will Honea
know the light stuff too. It might do on some, but can you grease the
TJ's joints? If you can't grease them regularly, then I wouldn't use
it.
I wonder what something like crazy glue or that super weather-strip
adhesive or gorilla snot would do on the split. I have extra boots
around, just no easy way of putting them on, but a split and glue
hmm.....
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Canadian Off Road Trips Photos: Non members can still view!
Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
(More Off Road album links at bottom of the view page)
Will Honea wrote:
>
> I was doing some plumbing repairs the other day and came across
> something that might work for a while if you can get the outside of
> the boot clean. It's a rubber "tape" that self-cures after you get it
> on. Plenty flexible, the layers appear to literally grow together and
> conform to the surface. Looks like a potential repair for split boots
> as it cures really tough but still flexible. For the couple of bucks
> they get for it, it would be worth a try. An imporved duct tape? <g>.
>
> On Sat, 30 Sep 2006 02:09:25 UTC "TW" <attw@wave.co.nz (delete this)>
> wrote:
>
> > Hi All,
> >
> > I was under my TJ yesterday for a visual check (just precautionary) and noticed that the rubber boot over the end of the drag link has cracked. This is the tyre end (steering knuckle joint). There is clean grease in it, but the boot needs replacing. The FSM talks about taking the whole drag link off, but do I really need to for changing the boot over the joint? Any pointers. I just don't want to pay mega dollars for labour at a shop where the actual part is only a few dollars (i.e. the rubber boot).
> >
> > BTW, its a RHD Wrangler (I am in New Zealand).
> >
> > Thanks
> > TW
> > ---------
> > '01 TJ Renegade 4.0L Auto D30/D44
> > 265/75R16 BFG Muds, JKS Quick Discos, OME Lift, 1" MML, 1" BL
> >
>
> --
> Will Honea
Guest
Posts: n/a
Re: Drag link boot cover - '01 TJ
TW wrote:
> Hi All,
>
> I was under my TJ yesterday for a visual check (just precautionary)
> and noticed that the rubber boot over the end of the drag link has
> cracked. This is the tyre end (steering knuckle joint). There is
> clean grease in it, but the boot needs replacing. The FSM talks
> about taking the whole drag link off, but do I really need to for
> changing the boot over the joint? Any pointers. I just don't want
> to pay mega dollars for labour at a shop where the actual part is
> only a few dollars (i.e. the rubber boot).
The actual rubber gasket is fairly cheap but you will have to press
the stud out to change it. The rubber boot should be available at
a local auto parts store. Might want to ping Dave Milne, he lives
over on your side of the pond.
Similar to what I did to replace the joint but just clean it up with
some towel and put a new boot on. You would want to squeeze new
grease into the joint to force any contaminants out.
http://www.revbeergoggles.com/balljoint1/
Then again, some of the boots on my ZJ have been split for years.
I just squeeze lube into them about twice a year and wipe off the
excess.
--
DougW
> Hi All,
>
> I was under my TJ yesterday for a visual check (just precautionary)
> and noticed that the rubber boot over the end of the drag link has
> cracked. This is the tyre end (steering knuckle joint). There is
> clean grease in it, but the boot needs replacing. The FSM talks
> about taking the whole drag link off, but do I really need to for
> changing the boot over the joint? Any pointers. I just don't want
> to pay mega dollars for labour at a shop where the actual part is
> only a few dollars (i.e. the rubber boot).
The actual rubber gasket is fairly cheap but you will have to press
the stud out to change it. The rubber boot should be available at
a local auto parts store. Might want to ping Dave Milne, he lives
over on your side of the pond.
Similar to what I did to replace the joint but just clean it up with
some towel and put a new boot on. You would want to squeeze new
grease into the joint to force any contaminants out.
http://www.revbeergoggles.com/balljoint1/
Then again, some of the boots on my ZJ have been split for years.
I just squeeze lube into them about twice a year and wipe off the
excess.
--
DougW
Guest
Posts: n/a
Re: Drag link boot cover - '01 TJ
TW wrote:
> Hi All,
>
> I was under my TJ yesterday for a visual check (just precautionary)
> and noticed that the rubber boot over the end of the drag link has
> cracked. This is the tyre end (steering knuckle joint). There is
> clean grease in it, but the boot needs replacing. The FSM talks
> about taking the whole drag link off, but do I really need to for
> changing the boot over the joint? Any pointers. I just don't want
> to pay mega dollars for labour at a shop where the actual part is
> only a few dollars (i.e. the rubber boot).
The actual rubber gasket is fairly cheap but you will have to press
the stud out to change it. The rubber boot should be available at
a local auto parts store. Might want to ping Dave Milne, he lives
over on your side of the pond.
Similar to what I did to replace the joint but just clean it up with
some towel and put a new boot on. You would want to squeeze new
grease into the joint to force any contaminants out.
http://www.revbeergoggles.com/balljoint1/
Then again, some of the boots on my ZJ have been split for years.
I just squeeze lube into them about twice a year and wipe off the
excess.
--
DougW
> Hi All,
>
> I was under my TJ yesterday for a visual check (just precautionary)
> and noticed that the rubber boot over the end of the drag link has
> cracked. This is the tyre end (steering knuckle joint). There is
> clean grease in it, but the boot needs replacing. The FSM talks
> about taking the whole drag link off, but do I really need to for
> changing the boot over the joint? Any pointers. I just don't want
> to pay mega dollars for labour at a shop where the actual part is
> only a few dollars (i.e. the rubber boot).
The actual rubber gasket is fairly cheap but you will have to press
the stud out to change it. The rubber boot should be available at
a local auto parts store. Might want to ping Dave Milne, he lives
over on your side of the pond.
Similar to what I did to replace the joint but just clean it up with
some towel and put a new boot on. You would want to squeeze new
grease into the joint to force any contaminants out.
http://www.revbeergoggles.com/balljoint1/
Then again, some of the boots on my ZJ have been split for years.
I just squeeze lube into them about twice a year and wipe off the
excess.
--
DougW
Guest
Posts: n/a
Re: Drag link boot cover - '01 TJ
TW wrote:
> Hi All,
>
> I was under my TJ yesterday for a visual check (just precautionary)
> and noticed that the rubber boot over the end of the drag link has
> cracked. This is the tyre end (steering knuckle joint). There is
> clean grease in it, but the boot needs replacing. The FSM talks
> about taking the whole drag link off, but do I really need to for
> changing the boot over the joint? Any pointers. I just don't want
> to pay mega dollars for labour at a shop where the actual part is
> only a few dollars (i.e. the rubber boot).
The actual rubber gasket is fairly cheap but you will have to press
the stud out to change it. The rubber boot should be available at
a local auto parts store. Might want to ping Dave Milne, he lives
over on your side of the pond.
Similar to what I did to replace the joint but just clean it up with
some towel and put a new boot on. You would want to squeeze new
grease into the joint to force any contaminants out.
http://www.revbeergoggles.com/balljoint1/
Then again, some of the boots on my ZJ have been split for years.
I just squeeze lube into them about twice a year and wipe off the
excess.
--
DougW
> Hi All,
>
> I was under my TJ yesterday for a visual check (just precautionary)
> and noticed that the rubber boot over the end of the drag link has
> cracked. This is the tyre end (steering knuckle joint). There is
> clean grease in it, but the boot needs replacing. The FSM talks
> about taking the whole drag link off, but do I really need to for
> changing the boot over the joint? Any pointers. I just don't want
> to pay mega dollars for labour at a shop where the actual part is
> only a few dollars (i.e. the rubber boot).
The actual rubber gasket is fairly cheap but you will have to press
the stud out to change it. The rubber boot should be available at
a local auto parts store. Might want to ping Dave Milne, he lives
over on your side of the pond.
Similar to what I did to replace the joint but just clean it up with
some towel and put a new boot on. You would want to squeeze new
grease into the joint to force any contaminants out.
http://www.revbeergoggles.com/balljoint1/
Then again, some of the boots on my ZJ have been split for years.
I just squeeze lube into them about twice a year and wipe off the
excess.
--
DougW
Guest
Posts: n/a
Re: Drag link boot cover - '01 TJ
We used to use super glue on VW Bug boots. All the after-market
replacement boots were split since removing the axle to get one on was
a major chore. We all used clothespins to hold the edges together
while the glue set up but these were reasonable wide flanges with
mating grooves so the biggest hassle was keeping them ultra clean when
working with them. Last set I put on that way was still intact 5
years later when the poor old bug made its final run to the wrecker.
Just for info, the original yarget use for super glue was for bonding
rubber parts. I think that getting a used, torn boot clean enough
then applying enough pressure durinb cure would be really hard. I
have no idea how this plumbing repair taper would work here but I was
inpressed by the bond to ABS, PVC, and cast iron pipe. I'll probably
play with it next time I need a quick and dirty repair.
On Sat, 30 Sep 2006 17:00:59 UTC Mike Romain <romainm@sympatico.ca>
wrote:
> I have a heavy duty version of that stuff called 'splicing tape', but
> know the light stuff too. It might do on some, but can you grease the
> TJ's joints? If you can't grease them regularly, then I wouldn't use
> it.
>
> I wonder what something like crazy glue or that super weather-strip
> adhesive or gorilla snot would do on the split. I have extra boots
> around, just no easy way of putting them on, but a split and glue
> hmm.....
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
> Canadian Off Road Trips Photos: Non members can still view!
> Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
> (More Off Road album links at bottom of the view page)
>
> Will Honea wrote:
> >
> > I was doing some plumbing repairs the other day and came across
> > something that might work for a while if you can get the outside of
> > the boot clean. It's a rubber "tape" that self-cures after you get it
> > on. Plenty flexible, the layers appear to literally grow together and
> > conform to the surface. Looks like a potential repair for split boots
> > as it cures really tough but still flexible. For the couple of bucks
> > they get for it, it would be worth a try. An imporved duct tape? <g>.
> >
> > On Sat, 30 Sep 2006 02:09:25 UTC "TW" <attw@wave.co.nz (delete this)>
> > wrote:
> >
> > > Hi All,
> > >
> > > I was under my TJ yesterday for a visual check (just precautionary) and noticed that the rubber boot over the end of the drag link has cracked. This is the tyre end (steering knuckle joint). There is clean grease in it, but the boot needs replacing. The FSM talks about taking the whole drag link off, but do I really need to for changing the boot over the joint? Any pointers. I just don't want to pay mega dollars for labour at a shop where the actual part is only a few dollars (i.e. the rubber boot).
> > >
> > > BTW, its a RHD Wrangler (I am in New Zealand).
> > >
> > > Thanks
> > > TW
> > > ---------
> > > '01 TJ Renegade 4.0L Auto D30/D44
> > > 265/75R16 BFG Muds, JKS Quick Discos, OME Lift, 1" MML, 1" BL
> > >
> >
> > --
> > Will Honea
--
Will Honea
replacement boots were split since removing the axle to get one on was
a major chore. We all used clothespins to hold the edges together
while the glue set up but these were reasonable wide flanges with
mating grooves so the biggest hassle was keeping them ultra clean when
working with them. Last set I put on that way was still intact 5
years later when the poor old bug made its final run to the wrecker.
Just for info, the original yarget use for super glue was for bonding
rubber parts. I think that getting a used, torn boot clean enough
then applying enough pressure durinb cure would be really hard. I
have no idea how this plumbing repair taper would work here but I was
inpressed by the bond to ABS, PVC, and cast iron pipe. I'll probably
play with it next time I need a quick and dirty repair.
On Sat, 30 Sep 2006 17:00:59 UTC Mike Romain <romainm@sympatico.ca>
wrote:
> I have a heavy duty version of that stuff called 'splicing tape', but
> know the light stuff too. It might do on some, but can you grease the
> TJ's joints? If you can't grease them regularly, then I wouldn't use
> it.
>
> I wonder what something like crazy glue or that super weather-strip
> adhesive or gorilla snot would do on the split. I have extra boots
> around, just no easy way of putting them on, but a split and glue
> hmm.....
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
> Canadian Off Road Trips Photos: Non members can still view!
> Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
> (More Off Road album links at bottom of the view page)
>
> Will Honea wrote:
> >
> > I was doing some plumbing repairs the other day and came across
> > something that might work for a while if you can get the outside of
> > the boot clean. It's a rubber "tape" that self-cures after you get it
> > on. Plenty flexible, the layers appear to literally grow together and
> > conform to the surface. Looks like a potential repair for split boots
> > as it cures really tough but still flexible. For the couple of bucks
> > they get for it, it would be worth a try. An imporved duct tape? <g>.
> >
> > On Sat, 30 Sep 2006 02:09:25 UTC "TW" <attw@wave.co.nz (delete this)>
> > wrote:
> >
> > > Hi All,
> > >
> > > I was under my TJ yesterday for a visual check (just precautionary) and noticed that the rubber boot over the end of the drag link has cracked. This is the tyre end (steering knuckle joint). There is clean grease in it, but the boot needs replacing. The FSM talks about taking the whole drag link off, but do I really need to for changing the boot over the joint? Any pointers. I just don't want to pay mega dollars for labour at a shop where the actual part is only a few dollars (i.e. the rubber boot).
> > >
> > > BTW, its a RHD Wrangler (I am in New Zealand).
> > >
> > > Thanks
> > > TW
> > > ---------
> > > '01 TJ Renegade 4.0L Auto D30/D44
> > > 265/75R16 BFG Muds, JKS Quick Discos, OME Lift, 1" MML, 1" BL
> > >
> >
> > --
> > Will Honea
--
Will Honea