Does your Jeep have vinyl or cloth seating?
Guest
Posts: n/a
Re: Does your Jeep have vinyl or cloth seating?
Part of the reason I'm doing this is because someone has removed half of the
smog equipment and I think the computer is rather confused and running in
open loop mode. I want a manual choke. As I mainly got it for its torque for
towing stuff, I'll be happy with 250hp - it currently puts out 145 - around
25hp per litre.
Dave Milne, Scotland
'91 Grand Wagoneer, '99 TJ
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:40894F70.289F074B@***.net...
> If the cam name has some stupid name like RV Torquer, then not
> much, also you need more compression than I think a SMOGed '91 will give
> you, but if it's up around ten to one, and can flow about 850 Cubic Feet
> Per Minute through a good cross flow design in the 330 degree duration,
> then about a horse power per cube. Dream wheels:
> http://www.----------.com/calculator.htm
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> Dave Milne wrote:
> >
> > I think the 401 is the only one that came with a forged crank - the 360
and
> > 390
> > have crappy cast bottom ends. Speaking of which, has anyone any idea of
what
> > I should expect to get from an Edelbrock performer cam , intake and carb
> > swap on a Waggy 360 ?
> >
> > Dave Milne, Scotland
> > '91 Grand Wagoneer, '99 TJ
smog equipment and I think the computer is rather confused and running in
open loop mode. I want a manual choke. As I mainly got it for its torque for
towing stuff, I'll be happy with 250hp - it currently puts out 145 - around
25hp per litre.
Dave Milne, Scotland
'91 Grand Wagoneer, '99 TJ
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:40894F70.289F074B@***.net...
> If the cam name has some stupid name like RV Torquer, then not
> much, also you need more compression than I think a SMOGed '91 will give
> you, but if it's up around ten to one, and can flow about 850 Cubic Feet
> Per Minute through a good cross flow design in the 330 degree duration,
> then about a horse power per cube. Dream wheels:
> http://www.----------.com/calculator.htm
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> Dave Milne wrote:
> >
> > I think the 401 is the only one that came with a forged crank - the 360
and
> > 390
> > have crappy cast bottom ends. Speaking of which, has anyone any idea of
what
> > I should expect to get from an Edelbrock performer cam , intake and carb
> > swap on a Waggy 360 ?
> >
> > Dave Milne, Scotland
> > '91 Grand Wagoneer, '99 TJ
Guest
Posts: n/a
Re: Does your Jeep have vinyl or cloth seating?
Part of the reason I'm doing this is because someone has removed half of the
smog equipment and I think the computer is rather confused and running in
open loop mode. I want a manual choke. As I mainly got it for its torque for
towing stuff, I'll be happy with 250hp - it currently puts out 145 - around
25hp per litre.
Dave Milne, Scotland
'91 Grand Wagoneer, '99 TJ
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:40894F70.289F074B@***.net...
> If the cam name has some stupid name like RV Torquer, then not
> much, also you need more compression than I think a SMOGed '91 will give
> you, but if it's up around ten to one, and can flow about 850 Cubic Feet
> Per Minute through a good cross flow design in the 330 degree duration,
> then about a horse power per cube. Dream wheels:
> http://www.----------.com/calculator.htm
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> Dave Milne wrote:
> >
> > I think the 401 is the only one that came with a forged crank - the 360
and
> > 390
> > have crappy cast bottom ends. Speaking of which, has anyone any idea of
what
> > I should expect to get from an Edelbrock performer cam , intake and carb
> > swap on a Waggy 360 ?
> >
> > Dave Milne, Scotland
> > '91 Grand Wagoneer, '99 TJ
smog equipment and I think the computer is rather confused and running in
open loop mode. I want a manual choke. As I mainly got it for its torque for
towing stuff, I'll be happy with 250hp - it currently puts out 145 - around
25hp per litre.
Dave Milne, Scotland
'91 Grand Wagoneer, '99 TJ
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:40894F70.289F074B@***.net...
> If the cam name has some stupid name like RV Torquer, then not
> much, also you need more compression than I think a SMOGed '91 will give
> you, but if it's up around ten to one, and can flow about 850 Cubic Feet
> Per Minute through a good cross flow design in the 330 degree duration,
> then about a horse power per cube. Dream wheels:
> http://www.----------.com/calculator.htm
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> Dave Milne wrote:
> >
> > I think the 401 is the only one that came with a forged crank - the 360
and
> > 390
> > have crappy cast bottom ends. Speaking of which, has anyone any idea of
what
> > I should expect to get from an Edelbrock performer cam , intake and carb
> > swap on a Waggy 360 ?
> >
> > Dave Milne, Scotland
> > '91 Grand Wagoneer, '99 TJ
Guest
Posts: n/a
Re: Does your Jeep have vinyl or cloth seating?
Part of the reason I'm doing this is because someone has removed half of the
smog equipment and I think the computer is rather confused and running in
open loop mode. I want a manual choke. As I mainly got it for its torque for
towing stuff, I'll be happy with 250hp - it currently puts out 145 - around
25hp per litre.
Dave Milne, Scotland
'91 Grand Wagoneer, '99 TJ
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:40894F70.289F074B@***.net...
> If the cam name has some stupid name like RV Torquer, then not
> much, also you need more compression than I think a SMOGed '91 will give
> you, but if it's up around ten to one, and can flow about 850 Cubic Feet
> Per Minute through a good cross flow design in the 330 degree duration,
> then about a horse power per cube. Dream wheels:
> http://www.----------.com/calculator.htm
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> Dave Milne wrote:
> >
> > I think the 401 is the only one that came with a forged crank - the 360
and
> > 390
> > have crappy cast bottom ends. Speaking of which, has anyone any idea of
what
> > I should expect to get from an Edelbrock performer cam , intake and carb
> > swap on a Waggy 360 ?
> >
> > Dave Milne, Scotland
> > '91 Grand Wagoneer, '99 TJ
smog equipment and I think the computer is rather confused and running in
open loop mode. I want a manual choke. As I mainly got it for its torque for
towing stuff, I'll be happy with 250hp - it currently puts out 145 - around
25hp per litre.
Dave Milne, Scotland
'91 Grand Wagoneer, '99 TJ
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:40894F70.289F074B@***.net...
> If the cam name has some stupid name like RV Torquer, then not
> much, also you need more compression than I think a SMOGed '91 will give
> you, but if it's up around ten to one, and can flow about 850 Cubic Feet
> Per Minute through a good cross flow design in the 330 degree duration,
> then about a horse power per cube. Dream wheels:
> http://www.----------.com/calculator.htm
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> Dave Milne wrote:
> >
> > I think the 401 is the only one that came with a forged crank - the 360
and
> > 390
> > have crappy cast bottom ends. Speaking of which, has anyone any idea of
what
> > I should expect to get from an Edelbrock performer cam , intake and carb
> > swap on a Waggy 360 ?
> >
> > Dave Milne, Scotland
> > '91 Grand Wagoneer, '99 TJ
Guest
Posts: n/a
Re: Does your Jeep have vinyl or cloth seating?
In message <o9dic.173$Os7.1908955@news-text.cableinet.net>, "Dave Milne" wrote:
>Part of the reason I'm doing this is because someone has removed half of the
>smog equipment and I think the computer is rather confused and running in
>open loop mode. I want a manual choke. As I mainly got it for its torque for
>towing stuff, I'll be happy with 250hp - it currently puts out 145 - around
>25hp per litre.
91 Grand Wagoneer with a computer? They didn't have computers in the US,
>
>Dave Milne, Scotland
>'91 Grand Wagoneer, '99 TJ
>
>"L.W. (ßill) ------ III" <----------@***.net> wrote in message
>news:40894F70.289F074B@***.net...
>> If the cam name has some stupid name like RV Torquer, then not
>> much, also you need more compression than I think a SMOGed '91 will give
>> you, but if it's up around ten to one, and can flow about 850 Cubic Feet
>> Per Minute through a good cross flow design in the 330 degree duration,
>> then about a horse power per cube. Dream wheels:
>> http://www.----------.com/calculator.htm
>> God Bless America, ßill O|||||||O
>> mailto:-------------------- http://www.----------.com/
>>
>> Dave Milne wrote:
>> >
>> > I think the 401 is the only one that came with a forged crank - the 360
>and
>> > 390
>> > have crappy cast bottom ends. Speaking of which, has anyone any idea of
>what
>> > I should expect to get from an Edelbrock performer cam , intake and carb
>> > swap on a Waggy 360 ?
>> >
>> > Dave Milne, Scotland
>> > '91 Grand Wagoneer, '99 TJ
>
>Part of the reason I'm doing this is because someone has removed half of the
>smog equipment and I think the computer is rather confused and running in
>open loop mode. I want a manual choke. As I mainly got it for its torque for
>towing stuff, I'll be happy with 250hp - it currently puts out 145 - around
>25hp per litre.
91 Grand Wagoneer with a computer? They didn't have computers in the US,
>
>Dave Milne, Scotland
>'91 Grand Wagoneer, '99 TJ
>
>"L.W. (ßill) ------ III" <----------@***.net> wrote in message
>news:40894F70.289F074B@***.net...
>> If the cam name has some stupid name like RV Torquer, then not
>> much, also you need more compression than I think a SMOGed '91 will give
>> you, but if it's up around ten to one, and can flow about 850 Cubic Feet
>> Per Minute through a good cross flow design in the 330 degree duration,
>> then about a horse power per cube. Dream wheels:
>> http://www.----------.com/calculator.htm
>> God Bless America, ßill O|||||||O
>> mailto:-------------------- http://www.----------.com/
>>
>> Dave Milne wrote:
>> >
>> > I think the 401 is the only one that came with a forged crank - the 360
>and
>> > 390
>> > have crappy cast bottom ends. Speaking of which, has anyone any idea of
>what
>> > I should expect to get from an Edelbrock performer cam , intake and carb
>> > swap on a Waggy 360 ?
>> >
>> > Dave Milne, Scotland
>> > '91 Grand Wagoneer, '99 TJ
>
Guest
Posts: n/a
Re: Does your Jeep have vinyl or cloth seating?
In message <o9dic.173$Os7.1908955@news-text.cableinet.net>, "Dave Milne" wrote:
>Part of the reason I'm doing this is because someone has removed half of the
>smog equipment and I think the computer is rather confused and running in
>open loop mode. I want a manual choke. As I mainly got it for its torque for
>towing stuff, I'll be happy with 250hp - it currently puts out 145 - around
>25hp per litre.
91 Grand Wagoneer with a computer? They didn't have computers in the US,
>
>Dave Milne, Scotland
>'91 Grand Wagoneer, '99 TJ
>
>"L.W. (ßill) ------ III" <----------@***.net> wrote in message
>news:40894F70.289F074B@***.net...
>> If the cam name has some stupid name like RV Torquer, then not
>> much, also you need more compression than I think a SMOGed '91 will give
>> you, but if it's up around ten to one, and can flow about 850 Cubic Feet
>> Per Minute through a good cross flow design in the 330 degree duration,
>> then about a horse power per cube. Dream wheels:
>> http://www.----------.com/calculator.htm
>> God Bless America, ßill O|||||||O
>> mailto:-------------------- http://www.----------.com/
>>
>> Dave Milne wrote:
>> >
>> > I think the 401 is the only one that came with a forged crank - the 360
>and
>> > 390
>> > have crappy cast bottom ends. Speaking of which, has anyone any idea of
>what
>> > I should expect to get from an Edelbrock performer cam , intake and carb
>> > swap on a Waggy 360 ?
>> >
>> > Dave Milne, Scotland
>> > '91 Grand Wagoneer, '99 TJ
>
>Part of the reason I'm doing this is because someone has removed half of the
>smog equipment and I think the computer is rather confused and running in
>open loop mode. I want a manual choke. As I mainly got it for its torque for
>towing stuff, I'll be happy with 250hp - it currently puts out 145 - around
>25hp per litre.
91 Grand Wagoneer with a computer? They didn't have computers in the US,
>
>Dave Milne, Scotland
>'91 Grand Wagoneer, '99 TJ
>
>"L.W. (ßill) ------ III" <----------@***.net> wrote in message
>news:40894F70.289F074B@***.net...
>> If the cam name has some stupid name like RV Torquer, then not
>> much, also you need more compression than I think a SMOGed '91 will give
>> you, but if it's up around ten to one, and can flow about 850 Cubic Feet
>> Per Minute through a good cross flow design in the 330 degree duration,
>> then about a horse power per cube. Dream wheels:
>> http://www.----------.com/calculator.htm
>> God Bless America, ßill O|||||||O
>> mailto:-------------------- http://www.----------.com/
>>
>> Dave Milne wrote:
>> >
>> > I think the 401 is the only one that came with a forged crank - the 360
>and
>> > 390
>> > have crappy cast bottom ends. Speaking of which, has anyone any idea of
>what
>> > I should expect to get from an Edelbrock performer cam , intake and carb
>> > swap on a Waggy 360 ?
>> >
>> > Dave Milne, Scotland
>> > '91 Grand Wagoneer, '99 TJ
>
Guest
Posts: n/a
Re: Does your Jeep have vinyl or cloth seating?
In message <o9dic.173$Os7.1908955@news-text.cableinet.net>, "Dave Milne" wrote:
>Part of the reason I'm doing this is because someone has removed half of the
>smog equipment and I think the computer is rather confused and running in
>open loop mode. I want a manual choke. As I mainly got it for its torque for
>towing stuff, I'll be happy with 250hp - it currently puts out 145 - around
>25hp per litre.
91 Grand Wagoneer with a computer? They didn't have computers in the US,
>
>Dave Milne, Scotland
>'91 Grand Wagoneer, '99 TJ
>
>"L.W. (ßill) ------ III" <----------@***.net> wrote in message
>news:40894F70.289F074B@***.net...
>> If the cam name has some stupid name like RV Torquer, then not
>> much, also you need more compression than I think a SMOGed '91 will give
>> you, but if it's up around ten to one, and can flow about 850 Cubic Feet
>> Per Minute through a good cross flow design in the 330 degree duration,
>> then about a horse power per cube. Dream wheels:
>> http://www.----------.com/calculator.htm
>> God Bless America, ßill O|||||||O
>> mailto:-------------------- http://www.----------.com/
>>
>> Dave Milne wrote:
>> >
>> > I think the 401 is the only one that came with a forged crank - the 360
>and
>> > 390
>> > have crappy cast bottom ends. Speaking of which, has anyone any idea of
>what
>> > I should expect to get from an Edelbrock performer cam , intake and carb
>> > swap on a Waggy 360 ?
>> >
>> > Dave Milne, Scotland
>> > '91 Grand Wagoneer, '99 TJ
>
>Part of the reason I'm doing this is because someone has removed half of the
>smog equipment and I think the computer is rather confused and running in
>open loop mode. I want a manual choke. As I mainly got it for its torque for
>towing stuff, I'll be happy with 250hp - it currently puts out 145 - around
>25hp per litre.
91 Grand Wagoneer with a computer? They didn't have computers in the US,
>
>Dave Milne, Scotland
>'91 Grand Wagoneer, '99 TJ
>
>"L.W. (ßill) ------ III" <----------@***.net> wrote in message
>news:40894F70.289F074B@***.net...
>> If the cam name has some stupid name like RV Torquer, then not
>> much, also you need more compression than I think a SMOGed '91 will give
>> you, but if it's up around ten to one, and can flow about 850 Cubic Feet
>> Per Minute through a good cross flow design in the 330 degree duration,
>> then about a horse power per cube. Dream wheels:
>> http://www.----------.com/calculator.htm
>> God Bless America, ßill O|||||||O
>> mailto:-------------------- http://www.----------.com/
>>
>> Dave Milne wrote:
>> >
>> > I think the 401 is the only one that came with a forged crank - the 360
>and
>> > 390
>> > have crappy cast bottom ends. Speaking of which, has anyone any idea of
>what
>> > I should expect to get from an Edelbrock performer cam , intake and carb
>> > swap on a Waggy 360 ?
>> >
>> > Dave Milne, Scotland
>> > '91 Grand Wagoneer, '99 TJ
>
Guest
Posts: n/a
Re: Does your Jeep have vinyl or cloth seating?
In message <o9dic.173$Os7.1908955@news-text.cableinet.net>, "Dave Milne" wrote:
>Part of the reason I'm doing this is because someone has removed half of the
>smog equipment and I think the computer is rather confused and running in
>open loop mode. I want a manual choke. As I mainly got it for its torque for
>towing stuff, I'll be happy with 250hp - it currently puts out 145 - around
>25hp per litre.
91 Grand Wagoneer with a computer? They didn't have computers in the US,
>
>Dave Milne, Scotland
>'91 Grand Wagoneer, '99 TJ
>
>"L.W. (ßill) ------ III" <----------@***.net> wrote in message
>news:40894F70.289F074B@***.net...
>> If the cam name has some stupid name like RV Torquer, then not
>> much, also you need more compression than I think a SMOGed '91 will give
>> you, but if it's up around ten to one, and can flow about 850 Cubic Feet
>> Per Minute through a good cross flow design in the 330 degree duration,
>> then about a horse power per cube. Dream wheels:
>> http://www.----------.com/calculator.htm
>> God Bless America, ßill O|||||||O
>> mailto:-------------------- http://www.----------.com/
>>
>> Dave Milne wrote:
>> >
>> > I think the 401 is the only one that came with a forged crank - the 360
>and
>> > 390
>> > have crappy cast bottom ends. Speaking of which, has anyone any idea of
>what
>> > I should expect to get from an Edelbrock performer cam , intake and carb
>> > swap on a Waggy 360 ?
>> >
>> > Dave Milne, Scotland
>> > '91 Grand Wagoneer, '99 TJ
>
>Part of the reason I'm doing this is because someone has removed half of the
>smog equipment and I think the computer is rather confused and running in
>open loop mode. I want a manual choke. As I mainly got it for its torque for
>towing stuff, I'll be happy with 250hp - it currently puts out 145 - around
>25hp per litre.
91 Grand Wagoneer with a computer? They didn't have computers in the US,
>
>Dave Milne, Scotland
>'91 Grand Wagoneer, '99 TJ
>
>"L.W. (ßill) ------ III" <----------@***.net> wrote in message
>news:40894F70.289F074B@***.net...
>> If the cam name has some stupid name like RV Torquer, then not
>> much, also you need more compression than I think a SMOGed '91 will give
>> you, but if it's up around ten to one, and can flow about 850 Cubic Feet
>> Per Minute through a good cross flow design in the 330 degree duration,
>> then about a horse power per cube. Dream wheels:
>> http://www.----------.com/calculator.htm
>> God Bless America, ßill O|||||||O
>> mailto:-------------------- http://www.----------.com/
>>
>> Dave Milne wrote:
>> >
>> > I think the 401 is the only one that came with a forged crank - the 360
>and
>> > 390
>> > have crappy cast bottom ends. Speaking of which, has anyone any idea of
>what
>> > I should expect to get from an Edelbrock performer cam , intake and carb
>> > swap on a Waggy 360 ?
>> >
>> > Dave Milne, Scotland
>> > '91 Grand Wagoneer, '99 TJ
>
Guest
Posts: n/a
Re: Does your Jeep have vinyl or cloth seating?
Interesting, just the ignition module, everything else surely did
from ten to twenty years previous.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
bllsht wrote:
>
> 91 Grand Wagoneer with a computer? They didn't have computers in the US,
from ten to twenty years previous.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
bllsht wrote:
>
> 91 Grand Wagoneer with a computer? They didn't have computers in the US,
Guest
Posts: n/a
Re: Does your Jeep have vinyl or cloth seating?
Interesting, just the ignition module, everything else surely did
from ten to twenty years previous.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
bllsht wrote:
>
> 91 Grand Wagoneer with a computer? They didn't have computers in the US,
from ten to twenty years previous.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
bllsht wrote:
>
> 91 Grand Wagoneer with a computer? They didn't have computers in the US,
Guest
Posts: n/a
Re: Does your Jeep have vinyl or cloth seating?
Interesting, just the ignition module, everything else surely did
from ten to twenty years previous.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
bllsht wrote:
>
> 91 Grand Wagoneer with a computer? They didn't have computers in the US,
from ten to twenty years previous.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
bllsht wrote:
>
> 91 Grand Wagoneer with a computer? They didn't have computers in the US,
