To Do list...
Guest
Posts: n/a
To Do list...
OK gang, here's my To Do list...
Install rear locker -Have parts
Install TNT frame stiffeners - In mail, then @ painters
Install AJ's super rails - In mail, then @ painters
Install new Hella 550 fog lamps - Have parts
Install front and rear tow hooks - In mail
Fabricate cowl vent intake - Still designing/fabbing flanges
Front brakes and front axle U joints - Need to buy parts
Rebuild new (boneyard) front driveshaft, (new u joints and centering yoke,
have balance checked, ect), figure out front driveshaft clearance issue
(more on this later) - Need to buy c-yoke and u joints
Get rear driveshaft converted to CV - In the works
Find/make t-case skid plate - Located one I like
Wheel!!!! - Need gas and time!!
What's on your list?
Carl
Install rear locker -Have parts
Install TNT frame stiffeners - In mail, then @ painters
Install AJ's super rails - In mail, then @ painters
Install new Hella 550 fog lamps - Have parts
Install front and rear tow hooks - In mail
Fabricate cowl vent intake - Still designing/fabbing flanges
Front brakes and front axle U joints - Need to buy parts
Rebuild new (boneyard) front driveshaft, (new u joints and centering yoke,
have balance checked, ect), figure out front driveshaft clearance issue
(more on this later) - Need to buy c-yoke and u joints
Get rear driveshaft converted to CV - In the works
Find/make t-case skid plate - Located one I like
Wheel!!!! - Need gas and time!!
What's on your list?
Carl
Guest
Posts: n/a
Re: To Do list...
On Sep 24, 7:26 pm, "Carl S" <carlsai...@REMOVE.hotmail.com> wrote:
> OK gang, here's my To Do list...
>
> Install rear locker -Have parts
>
> Install TNT frame stiffeners - In mail, then @ painters
>
> Install AJ's super rails - In mail, then @ painters
>
> Install new Hella 550 fog lamps - Have parts
>
> Install front and rear tow hooks - In mail
>
> Fabricate cowl vent intake - Still designing/fabbing flanges
>
> Front brakes and front axle U joints - Need to buy parts
>
> Rebuild new (boneyard) front driveshaft, (new u joints and centering yoke,
> have balance checked, ect), figure out front driveshaft clearance issue
> (more on this later) - Need to buy c-yoke and u joints
>
> Get rear driveshaft converted to CV - In the works
>
> Find/make t-case skid plate - Located one I like
>
> Wheel!!!! - Need gas and time!!
>
> What's on your list?
>
> Carl
In the works of making a cargo carrier for the rear 2" receiver.
Shooting up from the receiver in the bumper to 45 degrees for a foot
and a half, to avoid scraping on road surfaces, i.e., nasty decline
coming out of gas station or to the trail/camp. Of course the
"basket" is in the works but thinking of using BBQ mesh (thick kind),
for bottom, and some 3/4" by 1/2" tube for outside including the upper
supports.
Just finished making a 4 fishing pole holder that fits in place of my
front license plate brackett directly in the 2" front receiver. Works
great for 4 poles minus 1 pole with fishing net for driving or
fishing. :)
Finished up on some tang welding for my 5 gallon blitz tank on the
outside of my upper cargo carrier. (garvin) Rattled to much. Didn't
want to spend the money for the gravin can holders.
For now, if I do anymore, I will probably have to live in my jeep.
Least my wife thinks so. I guess that probably wouldn't be too much
torture. I live in the jeep on the weekends, just trying making it
roomier (is that a word?). :)
Take care and cheers,
Oh yeah, this is on a 05 rubicon. My Dad is the welder. I just turn
bolts. :)
> OK gang, here's my To Do list...
>
> Install rear locker -Have parts
>
> Install TNT frame stiffeners - In mail, then @ painters
>
> Install AJ's super rails - In mail, then @ painters
>
> Install new Hella 550 fog lamps - Have parts
>
> Install front and rear tow hooks - In mail
>
> Fabricate cowl vent intake - Still designing/fabbing flanges
>
> Front brakes and front axle U joints - Need to buy parts
>
> Rebuild new (boneyard) front driveshaft, (new u joints and centering yoke,
> have balance checked, ect), figure out front driveshaft clearance issue
> (more on this later) - Need to buy c-yoke and u joints
>
> Get rear driveshaft converted to CV - In the works
>
> Find/make t-case skid plate - Located one I like
>
> Wheel!!!! - Need gas and time!!
>
> What's on your list?
>
> Carl
In the works of making a cargo carrier for the rear 2" receiver.
Shooting up from the receiver in the bumper to 45 degrees for a foot
and a half, to avoid scraping on road surfaces, i.e., nasty decline
coming out of gas station or to the trail/camp. Of course the
"basket" is in the works but thinking of using BBQ mesh (thick kind),
for bottom, and some 3/4" by 1/2" tube for outside including the upper
supports.
Just finished making a 4 fishing pole holder that fits in place of my
front license plate brackett directly in the 2" front receiver. Works
great for 4 poles minus 1 pole with fishing net for driving or
fishing. :)
Finished up on some tang welding for my 5 gallon blitz tank on the
outside of my upper cargo carrier. (garvin) Rattled to much. Didn't
want to spend the money for the gravin can holders.
For now, if I do anymore, I will probably have to live in my jeep.
Least my wife thinks so. I guess that probably wouldn't be too much
torture. I live in the jeep on the weekends, just trying making it
roomier (is that a word?). :)
Take care and cheers,
Oh yeah, this is on a 05 rubicon. My Dad is the welder. I just turn
bolts. :)
Guest
Posts: n/a
Re: To Do list...
On Sep 24, 7:26 pm, "Carl S" <carlsai...@REMOVE.hotmail.com> wrote:
> OK gang, here's my To Do list...
>
> Install rear locker -Have parts
>
> Install TNT frame stiffeners - In mail, then @ painters
>
> Install AJ's super rails - In mail, then @ painters
>
> Install new Hella 550 fog lamps - Have parts
>
> Install front and rear tow hooks - In mail
>
> Fabricate cowl vent intake - Still designing/fabbing flanges
>
> Front brakes and front axle U joints - Need to buy parts
>
> Rebuild new (boneyard) front driveshaft, (new u joints and centering yoke,
> have balance checked, ect), figure out front driveshaft clearance issue
> (more on this later) - Need to buy c-yoke and u joints
>
> Get rear driveshaft converted to CV - In the works
>
> Find/make t-case skid plate - Located one I like
>
> Wheel!!!! - Need gas and time!!
>
> What's on your list?
>
> Carl
In the works of making a cargo carrier for the rear 2" receiver.
Shooting up from the receiver in the bumper to 45 degrees for a foot
and a half, to avoid scraping on road surfaces, i.e., nasty decline
coming out of gas station or to the trail/camp. Of course the
"basket" is in the works but thinking of using BBQ mesh (thick kind),
for bottom, and some 3/4" by 1/2" tube for outside including the upper
supports.
Just finished making a 4 fishing pole holder that fits in place of my
front license plate brackett directly in the 2" front receiver. Works
great for 4 poles minus 1 pole with fishing net for driving or
fishing. :)
Finished up on some tang welding for my 5 gallon blitz tank on the
outside of my upper cargo carrier. (garvin) Rattled to much. Didn't
want to spend the money for the gravin can holders.
For now, if I do anymore, I will probably have to live in my jeep.
Least my wife thinks so. I guess that probably wouldn't be too much
torture. I live in the jeep on the weekends, just trying making it
roomier (is that a word?). :)
Take care and cheers,
Oh yeah, this is on a 05 rubicon. My Dad is the welder. I just turn
bolts. :)
> OK gang, here's my To Do list...
>
> Install rear locker -Have parts
>
> Install TNT frame stiffeners - In mail, then @ painters
>
> Install AJ's super rails - In mail, then @ painters
>
> Install new Hella 550 fog lamps - Have parts
>
> Install front and rear tow hooks - In mail
>
> Fabricate cowl vent intake - Still designing/fabbing flanges
>
> Front brakes and front axle U joints - Need to buy parts
>
> Rebuild new (boneyard) front driveshaft, (new u joints and centering yoke,
> have balance checked, ect), figure out front driveshaft clearance issue
> (more on this later) - Need to buy c-yoke and u joints
>
> Get rear driveshaft converted to CV - In the works
>
> Find/make t-case skid plate - Located one I like
>
> Wheel!!!! - Need gas and time!!
>
> What's on your list?
>
> Carl
In the works of making a cargo carrier for the rear 2" receiver.
Shooting up from the receiver in the bumper to 45 degrees for a foot
and a half, to avoid scraping on road surfaces, i.e., nasty decline
coming out of gas station or to the trail/camp. Of course the
"basket" is in the works but thinking of using BBQ mesh (thick kind),
for bottom, and some 3/4" by 1/2" tube for outside including the upper
supports.
Just finished making a 4 fishing pole holder that fits in place of my
front license plate brackett directly in the 2" front receiver. Works
great for 4 poles minus 1 pole with fishing net for driving or
fishing. :)
Finished up on some tang welding for my 5 gallon blitz tank on the
outside of my upper cargo carrier. (garvin) Rattled to much. Didn't
want to spend the money for the gravin can holders.
For now, if I do anymore, I will probably have to live in my jeep.
Least my wife thinks so. I guess that probably wouldn't be too much
torture. I live in the jeep on the weekends, just trying making it
roomier (is that a word?). :)
Take care and cheers,
Oh yeah, this is on a 05 rubicon. My Dad is the welder. I just turn
bolts. :)
Guest
Posts: n/a
Re: To Do list...
On Sep 24, 7:26 pm, "Carl S" <carlsai...@REMOVE.hotmail.com> wrote:
> OK gang, here's my To Do list...
>
> Install rear locker -Have parts
>
> Install TNT frame stiffeners - In mail, then @ painters
>
> Install AJ's super rails - In mail, then @ painters
>
> Install new Hella 550 fog lamps - Have parts
>
> Install front and rear tow hooks - In mail
>
> Fabricate cowl vent intake - Still designing/fabbing flanges
>
> Front brakes and front axle U joints - Need to buy parts
>
> Rebuild new (boneyard) front driveshaft, (new u joints and centering yoke,
> have balance checked, ect), figure out front driveshaft clearance issue
> (more on this later) - Need to buy c-yoke and u joints
>
> Get rear driveshaft converted to CV - In the works
>
> Find/make t-case skid plate - Located one I like
>
> Wheel!!!! - Need gas and time!!
>
> What's on your list?
>
> Carl
In the works of making a cargo carrier for the rear 2" receiver.
Shooting up from the receiver in the bumper to 45 degrees for a foot
and a half, to avoid scraping on road surfaces, i.e., nasty decline
coming out of gas station or to the trail/camp. Of course the
"basket" is in the works but thinking of using BBQ mesh (thick kind),
for bottom, and some 3/4" by 1/2" tube for outside including the upper
supports.
Just finished making a 4 fishing pole holder that fits in place of my
front license plate brackett directly in the 2" front receiver. Works
great for 4 poles minus 1 pole with fishing net for driving or
fishing. :)
Finished up on some tang welding for my 5 gallon blitz tank on the
outside of my upper cargo carrier. (garvin) Rattled to much. Didn't
want to spend the money for the gravin can holders.
For now, if I do anymore, I will probably have to live in my jeep.
Least my wife thinks so. I guess that probably wouldn't be too much
torture. I live in the jeep on the weekends, just trying making it
roomier (is that a word?). :)
Take care and cheers,
Oh yeah, this is on a 05 rubicon. My Dad is the welder. I just turn
bolts. :)
> OK gang, here's my To Do list...
>
> Install rear locker -Have parts
>
> Install TNT frame stiffeners - In mail, then @ painters
>
> Install AJ's super rails - In mail, then @ painters
>
> Install new Hella 550 fog lamps - Have parts
>
> Install front and rear tow hooks - In mail
>
> Fabricate cowl vent intake - Still designing/fabbing flanges
>
> Front brakes and front axle U joints - Need to buy parts
>
> Rebuild new (boneyard) front driveshaft, (new u joints and centering yoke,
> have balance checked, ect), figure out front driveshaft clearance issue
> (more on this later) - Need to buy c-yoke and u joints
>
> Get rear driveshaft converted to CV - In the works
>
> Find/make t-case skid plate - Located one I like
>
> Wheel!!!! - Need gas and time!!
>
> What's on your list?
>
> Carl
In the works of making a cargo carrier for the rear 2" receiver.
Shooting up from the receiver in the bumper to 45 degrees for a foot
and a half, to avoid scraping on road surfaces, i.e., nasty decline
coming out of gas station or to the trail/camp. Of course the
"basket" is in the works but thinking of using BBQ mesh (thick kind),
for bottom, and some 3/4" by 1/2" tube for outside including the upper
supports.
Just finished making a 4 fishing pole holder that fits in place of my
front license plate brackett directly in the 2" front receiver. Works
great for 4 poles minus 1 pole with fishing net for driving or
fishing. :)
Finished up on some tang welding for my 5 gallon blitz tank on the
outside of my upper cargo carrier. (garvin) Rattled to much. Didn't
want to spend the money for the gravin can holders.
For now, if I do anymore, I will probably have to live in my jeep.
Least my wife thinks so. I guess that probably wouldn't be too much
torture. I live in the jeep on the weekends, just trying making it
roomier (is that a word?). :)
Take care and cheers,
Oh yeah, this is on a 05 rubicon. My Dad is the welder. I just turn
bolts. :)
Guest
Posts: n/a
Re: To Do list...
On Sep 24, 7:26 pm, "Carl S" <carlsai...@REMOVE.hotmail.com> wrote:
> OK gang, here's my To Do list...
>
> Install rear locker -Have parts
>
> Install TNT frame stiffeners - In mail, then @ painters
>
> Install AJ's super rails - In mail, then @ painters
>
> Install new Hella 550 fog lamps - Have parts
>
> Install front and rear tow hooks - In mail
>
> Fabricate cowl vent intake - Still designing/fabbing flanges
>
> Front brakes and front axle U joints - Need to buy parts
>
> Rebuild new (boneyard) front driveshaft, (new u joints and centering yoke,
> have balance checked, ect), figure out front driveshaft clearance issue
> (more on this later) - Need to buy c-yoke and u joints
>
> Get rear driveshaft converted to CV - In the works
>
> Find/make t-case skid plate - Located one I like
>
> Wheel!!!! - Need gas and time!!
>
> What's on your list?
>
> Carl
In the works of making a cargo carrier for the rear 2" receiver.
Shooting up from the receiver in the bumper to 45 degrees for a foot
and a half, to avoid scraping on road surfaces, i.e., nasty decline
coming out of gas station or to the trail/camp. Of course the
"basket" is in the works but thinking of using BBQ mesh (thick kind),
for bottom, and some 3/4" by 1/2" tube for outside including the upper
supports.
Just finished making a 4 fishing pole holder that fits in place of my
front license plate brackett directly in the 2" front receiver. Works
great for 4 poles minus 1 pole with fishing net for driving or
fishing. :)
Finished up on some tang welding for my 5 gallon blitz tank on the
outside of my upper cargo carrier. (garvin) Rattled to much. Didn't
want to spend the money for the gravin can holders.
For now, if I do anymore, I will probably have to live in my jeep.
Least my wife thinks so. I guess that probably wouldn't be too much
torture. I live in the jeep on the weekends, just trying making it
roomier (is that a word?). :)
Take care and cheers,
Oh yeah, this is on a 05 rubicon. My Dad is the welder. I just turn
bolts. :)
> OK gang, here's my To Do list...
>
> Install rear locker -Have parts
>
> Install TNT frame stiffeners - In mail, then @ painters
>
> Install AJ's super rails - In mail, then @ painters
>
> Install new Hella 550 fog lamps - Have parts
>
> Install front and rear tow hooks - In mail
>
> Fabricate cowl vent intake - Still designing/fabbing flanges
>
> Front brakes and front axle U joints - Need to buy parts
>
> Rebuild new (boneyard) front driveshaft, (new u joints and centering yoke,
> have balance checked, ect), figure out front driveshaft clearance issue
> (more on this later) - Need to buy c-yoke and u joints
>
> Get rear driveshaft converted to CV - In the works
>
> Find/make t-case skid plate - Located one I like
>
> Wheel!!!! - Need gas and time!!
>
> What's on your list?
>
> Carl
In the works of making a cargo carrier for the rear 2" receiver.
Shooting up from the receiver in the bumper to 45 degrees for a foot
and a half, to avoid scraping on road surfaces, i.e., nasty decline
coming out of gas station or to the trail/camp. Of course the
"basket" is in the works but thinking of using BBQ mesh (thick kind),
for bottom, and some 3/4" by 1/2" tube for outside including the upper
supports.
Just finished making a 4 fishing pole holder that fits in place of my
front license plate brackett directly in the 2" front receiver. Works
great for 4 poles minus 1 pole with fishing net for driving or
fishing. :)
Finished up on some tang welding for my 5 gallon blitz tank on the
outside of my upper cargo carrier. (garvin) Rattled to much. Didn't
want to spend the money for the gravin can holders.
For now, if I do anymore, I will probably have to live in my jeep.
Least my wife thinks so. I guess that probably wouldn't be too much
torture. I live in the jeep on the weekends, just trying making it
roomier (is that a word?). :)
Take care and cheers,
Oh yeah, this is on a 05 rubicon. My Dad is the welder. I just turn
bolts. :)
Guest
Posts: n/a
Re: To Do list...
On Mon, 24 Sep 2007 19:26:43 -0700, "Carl S"
<carlsaiyed@REMOVE.hotmail.com> wrote:
>OK gang, here's my To Do list...
>
>Install rear locker -Have parts
>
>Install TNT frame stiffeners - In mail, then @ painters
>
>Install AJ's super rails - In mail, then @ painters
>
>Install new Hella 550 fog lamps - Have parts
>
>Install front and rear tow hooks - In mail
>
>Fabricate cowl vent intake - Still designing/fabbing flanges
>
>Front brakes and front axle U joints - Need to buy parts
>
>Rebuild new (boneyard) front driveshaft, (new u joints and centering yoke,
>have balance checked, ect), figure out front driveshaft clearance issue
>(more on this later) - Need to buy c-yoke and u joints
>
>Get rear driveshaft converted to CV - In the works
>
>Find/make t-case skid plate - Located one I like
>
>Wheel!!!! - Need gas and time!!
>
>What's on your list?
>
>Carl
>
Pretty easy ----. Right now, I have to remove the rear diff cover and
pull the right axle shaft so I can grind off the back of a stripped
stud to get the flat tire off my Wrangler.
My kidlet had a flat whilst borrowing my jeep and whoever had the
wheel off to fix it so I wouldn't know cross threaded a stud putting
it back on.
--
Old Crow "Yol Bolson!"
'82 FLTC-P "Miss Pearl"
'95 YJ Rio Grande
BS#133, SENS, TOMKAT, MAMBM
--
Posted via a free Usenet account from http://www.teranews.com
<carlsaiyed@REMOVE.hotmail.com> wrote:
>OK gang, here's my To Do list...
>
>Install rear locker -Have parts
>
>Install TNT frame stiffeners - In mail, then @ painters
>
>Install AJ's super rails - In mail, then @ painters
>
>Install new Hella 550 fog lamps - Have parts
>
>Install front and rear tow hooks - In mail
>
>Fabricate cowl vent intake - Still designing/fabbing flanges
>
>Front brakes and front axle U joints - Need to buy parts
>
>Rebuild new (boneyard) front driveshaft, (new u joints and centering yoke,
>have balance checked, ect), figure out front driveshaft clearance issue
>(more on this later) - Need to buy c-yoke and u joints
>
>Get rear driveshaft converted to CV - In the works
>
>Find/make t-case skid plate - Located one I like
>
>Wheel!!!! - Need gas and time!!
>
>What's on your list?
>
>Carl
>
Pretty easy ----. Right now, I have to remove the rear diff cover and
pull the right axle shaft so I can grind off the back of a stripped
stud to get the flat tire off my Wrangler.
My kidlet had a flat whilst borrowing my jeep and whoever had the
wheel off to fix it so I wouldn't know cross threaded a stud putting
it back on.
--
Old Crow "Yol Bolson!"
'82 FLTC-P "Miss Pearl"
'95 YJ Rio Grande
BS#133, SENS, TOMKAT, MAMBM
--
Posted via a free Usenet account from http://www.teranews.com
Guest
Posts: n/a
Re: To Do list...
On Mon, 24 Sep 2007 19:26:43 -0700, "Carl S"
<carlsaiyed@REMOVE.hotmail.com> wrote:
>OK gang, here's my To Do list...
>
>Install rear locker -Have parts
>
>Install TNT frame stiffeners - In mail, then @ painters
>
>Install AJ's super rails - In mail, then @ painters
>
>Install new Hella 550 fog lamps - Have parts
>
>Install front and rear tow hooks - In mail
>
>Fabricate cowl vent intake - Still designing/fabbing flanges
>
>Front brakes and front axle U joints - Need to buy parts
>
>Rebuild new (boneyard) front driveshaft, (new u joints and centering yoke,
>have balance checked, ect), figure out front driveshaft clearance issue
>(more on this later) - Need to buy c-yoke and u joints
>
>Get rear driveshaft converted to CV - In the works
>
>Find/make t-case skid plate - Located one I like
>
>Wheel!!!! - Need gas and time!!
>
>What's on your list?
>
>Carl
>
Pretty easy ----. Right now, I have to remove the rear diff cover and
pull the right axle shaft so I can grind off the back of a stripped
stud to get the flat tire off my Wrangler.
My kidlet had a flat whilst borrowing my jeep and whoever had the
wheel off to fix it so I wouldn't know cross threaded a stud putting
it back on.
--
Old Crow "Yol Bolson!"
'82 FLTC-P "Miss Pearl"
'95 YJ Rio Grande
BS#133, SENS, TOMKAT, MAMBM
--
Posted via a free Usenet account from http://www.teranews.com
<carlsaiyed@REMOVE.hotmail.com> wrote:
>OK gang, here's my To Do list...
>
>Install rear locker -Have parts
>
>Install TNT frame stiffeners - In mail, then @ painters
>
>Install AJ's super rails - In mail, then @ painters
>
>Install new Hella 550 fog lamps - Have parts
>
>Install front and rear tow hooks - In mail
>
>Fabricate cowl vent intake - Still designing/fabbing flanges
>
>Front brakes and front axle U joints - Need to buy parts
>
>Rebuild new (boneyard) front driveshaft, (new u joints and centering yoke,
>have balance checked, ect), figure out front driveshaft clearance issue
>(more on this later) - Need to buy c-yoke and u joints
>
>Get rear driveshaft converted to CV - In the works
>
>Find/make t-case skid plate - Located one I like
>
>Wheel!!!! - Need gas and time!!
>
>What's on your list?
>
>Carl
>
Pretty easy ----. Right now, I have to remove the rear diff cover and
pull the right axle shaft so I can grind off the back of a stripped
stud to get the flat tire off my Wrangler.
My kidlet had a flat whilst borrowing my jeep and whoever had the
wheel off to fix it so I wouldn't know cross threaded a stud putting
it back on.
--
Old Crow "Yol Bolson!"
'82 FLTC-P "Miss Pearl"
'95 YJ Rio Grande
BS#133, SENS, TOMKAT, MAMBM
--
Posted via a free Usenet account from http://www.teranews.com
Guest
Posts: n/a
Re: To Do list...
On Mon, 24 Sep 2007 19:26:43 -0700, "Carl S"
<carlsaiyed@REMOVE.hotmail.com> wrote:
>OK gang, here's my To Do list...
>
>Install rear locker -Have parts
>
>Install TNT frame stiffeners - In mail, then @ painters
>
>Install AJ's super rails - In mail, then @ painters
>
>Install new Hella 550 fog lamps - Have parts
>
>Install front and rear tow hooks - In mail
>
>Fabricate cowl vent intake - Still designing/fabbing flanges
>
>Front brakes and front axle U joints - Need to buy parts
>
>Rebuild new (boneyard) front driveshaft, (new u joints and centering yoke,
>have balance checked, ect), figure out front driveshaft clearance issue
>(more on this later) - Need to buy c-yoke and u joints
>
>Get rear driveshaft converted to CV - In the works
>
>Find/make t-case skid plate - Located one I like
>
>Wheel!!!! - Need gas and time!!
>
>What's on your list?
>
>Carl
>
Pretty easy ----. Right now, I have to remove the rear diff cover and
pull the right axle shaft so I can grind off the back of a stripped
stud to get the flat tire off my Wrangler.
My kidlet had a flat whilst borrowing my jeep and whoever had the
wheel off to fix it so I wouldn't know cross threaded a stud putting
it back on.
--
Old Crow "Yol Bolson!"
'82 FLTC-P "Miss Pearl"
'95 YJ Rio Grande
BS#133, SENS, TOMKAT, MAMBM
--
Posted via a free Usenet account from http://www.teranews.com
<carlsaiyed@REMOVE.hotmail.com> wrote:
>OK gang, here's my To Do list...
>
>Install rear locker -Have parts
>
>Install TNT frame stiffeners - In mail, then @ painters
>
>Install AJ's super rails - In mail, then @ painters
>
>Install new Hella 550 fog lamps - Have parts
>
>Install front and rear tow hooks - In mail
>
>Fabricate cowl vent intake - Still designing/fabbing flanges
>
>Front brakes and front axle U joints - Need to buy parts
>
>Rebuild new (boneyard) front driveshaft, (new u joints and centering yoke,
>have balance checked, ect), figure out front driveshaft clearance issue
>(more on this later) - Need to buy c-yoke and u joints
>
>Get rear driveshaft converted to CV - In the works
>
>Find/make t-case skid plate - Located one I like
>
>Wheel!!!! - Need gas and time!!
>
>What's on your list?
>
>Carl
>
Pretty easy ----. Right now, I have to remove the rear diff cover and
pull the right axle shaft so I can grind off the back of a stripped
stud to get the flat tire off my Wrangler.
My kidlet had a flat whilst borrowing my jeep and whoever had the
wheel off to fix it so I wouldn't know cross threaded a stud putting
it back on.
--
Old Crow "Yol Bolson!"
'82 FLTC-P "Miss Pearl"
'95 YJ Rio Grande
BS#133, SENS, TOMKAT, MAMBM
--
Posted via a free Usenet account from http://www.teranews.com
Guest
Posts: n/a
Re: To Do list...
On Mon, 24 Sep 2007 19:26:43 -0700, "Carl S"
<carlsaiyed@REMOVE.hotmail.com> wrote:
>OK gang, here's my To Do list...
>
>Install rear locker -Have parts
>
>Install TNT frame stiffeners - In mail, then @ painters
>
>Install AJ's super rails - In mail, then @ painters
>
>Install new Hella 550 fog lamps - Have parts
>
>Install front and rear tow hooks - In mail
>
>Fabricate cowl vent intake - Still designing/fabbing flanges
>
>Front brakes and front axle U joints - Need to buy parts
>
>Rebuild new (boneyard) front driveshaft, (new u joints and centering yoke,
>have balance checked, ect), figure out front driveshaft clearance issue
>(more on this later) - Need to buy c-yoke and u joints
>
>Get rear driveshaft converted to CV - In the works
>
>Find/make t-case skid plate - Located one I like
>
>Wheel!!!! - Need gas and time!!
>
>What's on your list?
>
>Carl
>
Pretty easy ----. Right now, I have to remove the rear diff cover and
pull the right axle shaft so I can grind off the back of a stripped
stud to get the flat tire off my Wrangler.
My kidlet had a flat whilst borrowing my jeep and whoever had the
wheel off to fix it so I wouldn't know cross threaded a stud putting
it back on.
--
Old Crow "Yol Bolson!"
'82 FLTC-P "Miss Pearl"
'95 YJ Rio Grande
BS#133, SENS, TOMKAT, MAMBM
--
Posted via a free Usenet account from http://www.teranews.com
<carlsaiyed@REMOVE.hotmail.com> wrote:
>OK gang, here's my To Do list...
>
>Install rear locker -Have parts
>
>Install TNT frame stiffeners - In mail, then @ painters
>
>Install AJ's super rails - In mail, then @ painters
>
>Install new Hella 550 fog lamps - Have parts
>
>Install front and rear tow hooks - In mail
>
>Fabricate cowl vent intake - Still designing/fabbing flanges
>
>Front brakes and front axle U joints - Need to buy parts
>
>Rebuild new (boneyard) front driveshaft, (new u joints and centering yoke,
>have balance checked, ect), figure out front driveshaft clearance issue
>(more on this later) - Need to buy c-yoke and u joints
>
>Get rear driveshaft converted to CV - In the works
>
>Find/make t-case skid plate - Located one I like
>
>Wheel!!!! - Need gas and time!!
>
>What's on your list?
>
>Carl
>
Pretty easy ----. Right now, I have to remove the rear diff cover and
pull the right axle shaft so I can grind off the back of a stripped
stud to get the flat tire off my Wrangler.
My kidlet had a flat whilst borrowing my jeep and whoever had the
wheel off to fix it so I wouldn't know cross threaded a stud putting
it back on.
--
Old Crow "Yol Bolson!"
'82 FLTC-P "Miss Pearl"
'95 YJ Rio Grande
BS#133, SENS, TOMKAT, MAMBM
--
Posted via a free Usenet account from http://www.teranews.com
Guest
Posts: n/a
Re: To Do list...
I have my CJ frame sandblasted and primed sitting in garage, think my
to-do list is longer then your's.
"Carl S" <carlsaiyed@REMOVE.hotmail.com> wrote in message
news:zL6dna69_IeY72XbnZ2dnUVZ_t6onZ2d@comcast.com. ..
> OK gang, here's my To Do list...
>
> Install rear locker -Have parts
>
> Install TNT frame stiffeners - In mail, then @ painters
>
> Install AJ's super rails - In mail, then @ painters
>
> Install new Hella 550 fog lamps - Have parts
>
> Install front and rear tow hooks - In mail
>
> Fabricate cowl vent intake - Still designing/fabbing flanges
>
> Front brakes and front axle U joints - Need to buy parts
>
> Rebuild new (boneyard) front driveshaft, (new u joints and centering yoke,
> have balance checked, ect), figure out front driveshaft clearance issue
> (more on this later) - Need to buy c-yoke and u joints
>
> Get rear driveshaft converted to CV - In the works
>
> Find/make t-case skid plate - Located one I like
>
> Wheel!!!! - Need gas and time!!
>
> What's on your list?
>
> Carl
>
to-do list is longer then your's.
"Carl S" <carlsaiyed@REMOVE.hotmail.com> wrote in message
news:zL6dna69_IeY72XbnZ2dnUVZ_t6onZ2d@comcast.com. ..
> OK gang, here's my To Do list...
>
> Install rear locker -Have parts
>
> Install TNT frame stiffeners - In mail, then @ painters
>
> Install AJ's super rails - In mail, then @ painters
>
> Install new Hella 550 fog lamps - Have parts
>
> Install front and rear tow hooks - In mail
>
> Fabricate cowl vent intake - Still designing/fabbing flanges
>
> Front brakes and front axle U joints - Need to buy parts
>
> Rebuild new (boneyard) front driveshaft, (new u joints and centering yoke,
> have balance checked, ect), figure out front driveshaft clearance issue
> (more on this later) - Need to buy c-yoke and u joints
>
> Get rear driveshaft converted to CV - In the works
>
> Find/make t-case skid plate - Located one I like
>
> Wheel!!!! - Need gas and time!!
>
> What's on your list?
>
> Carl
>