To Do list...
OK gang, here's my To Do list...
Install rear locker -Have parts Install TNT frame stiffeners - In mail, then @ painters Install AJ's super rails - In mail, then @ painters Install new Hella 550 fog lamps - Have parts Install front and rear tow hooks - In mail Fabricate cowl vent intake - Still designing/fabbing flanges Front brakes and front axle U joints - Need to buy parts Rebuild new (boneyard) front driveshaft, (new u joints and centering yoke, have balance checked, ect), figure out front driveshaft clearance issue (more on this later) - Need to buy c-yoke and u joints Get rear driveshaft converted to CV - In the works Find/make t-case skid plate - Located one I like Wheel!!!! - Need gas and time!! What's on your list? Carl |
Re: To Do list...
On Sep 24, 7:26 pm, "Carl S" <carlsai...@REMOVE.hotmail.com> wrote:
> OK gang, here's my To Do list... > > Install rear locker -Have parts > > Install TNT frame stiffeners - In mail, then @ painters > > Install AJ's super rails - In mail, then @ painters > > Install new Hella 550 fog lamps - Have parts > > Install front and rear tow hooks - In mail > > Fabricate cowl vent intake - Still designing/fabbing flanges > > Front brakes and front axle U joints - Need to buy parts > > Rebuild new (boneyard) front driveshaft, (new u joints and centering yoke, > have balance checked, ect), figure out front driveshaft clearance issue > (more on this later) - Need to buy c-yoke and u joints > > Get rear driveshaft converted to CV - In the works > > Find/make t-case skid plate - Located one I like > > Wheel!!!! - Need gas and time!! > > What's on your list? > > Carl In the works of making a cargo carrier for the rear 2" receiver. Shooting up from the receiver in the bumper to 45 degrees for a foot and a half, to avoid scraping on road surfaces, i.e., nasty decline coming out of gas station or to the trail/camp. Of course the "basket" is in the works but thinking of using BBQ mesh (thick kind), for bottom, and some 3/4" by 1/2" tube for outside including the upper supports. Just finished making a 4 fishing pole holder that fits in place of my front license plate brackett directly in the 2" front receiver. Works great for 4 poles minus 1 pole with fishing net for driving or fishing. :) Finished up on some tang welding for my 5 gallon blitz tank on the outside of my upper cargo carrier. (garvin) Rattled to much. Didn't want to spend the money for the gravin can holders. For now, if I do anymore, I will probably have to live in my jeep. Least my wife thinks so. I guess that probably wouldn't be too much torture. I live in the jeep on the weekends, just trying making it roomier (is that a word?). :) Take care and cheers, Oh yeah, this is on a 05 rubicon. My Dad is the welder. I just turn bolts. :) |
Re: To Do list...
On Sep 24, 7:26 pm, "Carl S" <carlsai...@REMOVE.hotmail.com> wrote:
> OK gang, here's my To Do list... > > Install rear locker -Have parts > > Install TNT frame stiffeners - In mail, then @ painters > > Install AJ's super rails - In mail, then @ painters > > Install new Hella 550 fog lamps - Have parts > > Install front and rear tow hooks - In mail > > Fabricate cowl vent intake - Still designing/fabbing flanges > > Front brakes and front axle U joints - Need to buy parts > > Rebuild new (boneyard) front driveshaft, (new u joints and centering yoke, > have balance checked, ect), figure out front driveshaft clearance issue > (more on this later) - Need to buy c-yoke and u joints > > Get rear driveshaft converted to CV - In the works > > Find/make t-case skid plate - Located one I like > > Wheel!!!! - Need gas and time!! > > What's on your list? > > Carl In the works of making a cargo carrier for the rear 2" receiver. Shooting up from the receiver in the bumper to 45 degrees for a foot and a half, to avoid scraping on road surfaces, i.e., nasty decline coming out of gas station or to the trail/camp. Of course the "basket" is in the works but thinking of using BBQ mesh (thick kind), for bottom, and some 3/4" by 1/2" tube for outside including the upper supports. Just finished making a 4 fishing pole holder that fits in place of my front license plate brackett directly in the 2" front receiver. Works great for 4 poles minus 1 pole with fishing net for driving or fishing. :) Finished up on some tang welding for my 5 gallon blitz tank on the outside of my upper cargo carrier. (garvin) Rattled to much. Didn't want to spend the money for the gravin can holders. For now, if I do anymore, I will probably have to live in my jeep. Least my wife thinks so. I guess that probably wouldn't be too much torture. I live in the jeep on the weekends, just trying making it roomier (is that a word?). :) Take care and cheers, Oh yeah, this is on a 05 rubicon. My Dad is the welder. I just turn bolts. :) |
Re: To Do list...
On Sep 24, 7:26 pm, "Carl S" <carlsai...@REMOVE.hotmail.com> wrote:
> OK gang, here's my To Do list... > > Install rear locker -Have parts > > Install TNT frame stiffeners - In mail, then @ painters > > Install AJ's super rails - In mail, then @ painters > > Install new Hella 550 fog lamps - Have parts > > Install front and rear tow hooks - In mail > > Fabricate cowl vent intake - Still designing/fabbing flanges > > Front brakes and front axle U joints - Need to buy parts > > Rebuild new (boneyard) front driveshaft, (new u joints and centering yoke, > have balance checked, ect), figure out front driveshaft clearance issue > (more on this later) - Need to buy c-yoke and u joints > > Get rear driveshaft converted to CV - In the works > > Find/make t-case skid plate - Located one I like > > Wheel!!!! - Need gas and time!! > > What's on your list? > > Carl In the works of making a cargo carrier for the rear 2" receiver. Shooting up from the receiver in the bumper to 45 degrees for a foot and a half, to avoid scraping on road surfaces, i.e., nasty decline coming out of gas station or to the trail/camp. Of course the "basket" is in the works but thinking of using BBQ mesh (thick kind), for bottom, and some 3/4" by 1/2" tube for outside including the upper supports. Just finished making a 4 fishing pole holder that fits in place of my front license plate brackett directly in the 2" front receiver. Works great for 4 poles minus 1 pole with fishing net for driving or fishing. :) Finished up on some tang welding for my 5 gallon blitz tank on the outside of my upper cargo carrier. (garvin) Rattled to much. Didn't want to spend the money for the gravin can holders. For now, if I do anymore, I will probably have to live in my jeep. Least my wife thinks so. I guess that probably wouldn't be too much torture. I live in the jeep on the weekends, just trying making it roomier (is that a word?). :) Take care and cheers, Oh yeah, this is on a 05 rubicon. My Dad is the welder. I just turn bolts. :) |
Re: To Do list...
On Sep 24, 7:26 pm, "Carl S" <carlsai...@REMOVE.hotmail.com> wrote:
> OK gang, here's my To Do list... > > Install rear locker -Have parts > > Install TNT frame stiffeners - In mail, then @ painters > > Install AJ's super rails - In mail, then @ painters > > Install new Hella 550 fog lamps - Have parts > > Install front and rear tow hooks - In mail > > Fabricate cowl vent intake - Still designing/fabbing flanges > > Front brakes and front axle U joints - Need to buy parts > > Rebuild new (boneyard) front driveshaft, (new u joints and centering yoke, > have balance checked, ect), figure out front driveshaft clearance issue > (more on this later) - Need to buy c-yoke and u joints > > Get rear driveshaft converted to CV - In the works > > Find/make t-case skid plate - Located one I like > > Wheel!!!! - Need gas and time!! > > What's on your list? > > Carl In the works of making a cargo carrier for the rear 2" receiver. Shooting up from the receiver in the bumper to 45 degrees for a foot and a half, to avoid scraping on road surfaces, i.e., nasty decline coming out of gas station or to the trail/camp. Of course the "basket" is in the works but thinking of using BBQ mesh (thick kind), for bottom, and some 3/4" by 1/2" tube for outside including the upper supports. Just finished making a 4 fishing pole holder that fits in place of my front license plate brackett directly in the 2" front receiver. Works great for 4 poles minus 1 pole with fishing net for driving or fishing. :) Finished up on some tang welding for my 5 gallon blitz tank on the outside of my upper cargo carrier. (garvin) Rattled to much. Didn't want to spend the money for the gravin can holders. For now, if I do anymore, I will probably have to live in my jeep. Least my wife thinks so. I guess that probably wouldn't be too much torture. I live in the jeep on the weekends, just trying making it roomier (is that a word?). :) Take care and cheers, Oh yeah, this is on a 05 rubicon. My Dad is the welder. I just turn bolts. :) |
Re: To Do list...
On Mon, 24 Sep 2007 19:26:43 -0700, "Carl S"
<carlsaiyed@REMOVE.hotmail.com> wrote: >OK gang, here's my To Do list... > >Install rear locker -Have parts > >Install TNT frame stiffeners - In mail, then @ painters > >Install AJ's super rails - In mail, then @ painters > >Install new Hella 550 fog lamps - Have parts > >Install front and rear tow hooks - In mail > >Fabricate cowl vent intake - Still designing/fabbing flanges > >Front brakes and front axle U joints - Need to buy parts > >Rebuild new (boneyard) front driveshaft, (new u joints and centering yoke, >have balance checked, ect), figure out front driveshaft clearance issue >(more on this later) - Need to buy c-yoke and u joints > >Get rear driveshaft converted to CV - In the works > >Find/make t-case skid plate - Located one I like > >Wheel!!!! - Need gas and time!! > >What's on your list? > >Carl > Pretty easy ----. Right now, I have to remove the rear diff cover and pull the right axle shaft so I can grind off the back of a stripped stud to get the flat tire off my Wrangler. My kidlet had a flat whilst borrowing my jeep and whoever had the wheel off to fix it so I wouldn't know cross threaded a stud putting it back on. -- Old Crow "Yol Bolson!" '82 FLTC-P "Miss Pearl" '95 YJ Rio Grande BS#133, SENS, TOMKAT, MAMBM -- Posted via a free Usenet account from http://www.teranews.com |
Re: To Do list...
On Mon, 24 Sep 2007 19:26:43 -0700, "Carl S"
<carlsaiyed@REMOVE.hotmail.com> wrote: >OK gang, here's my To Do list... > >Install rear locker -Have parts > >Install TNT frame stiffeners - In mail, then @ painters > >Install AJ's super rails - In mail, then @ painters > >Install new Hella 550 fog lamps - Have parts > >Install front and rear tow hooks - In mail > >Fabricate cowl vent intake - Still designing/fabbing flanges > >Front brakes and front axle U joints - Need to buy parts > >Rebuild new (boneyard) front driveshaft, (new u joints and centering yoke, >have balance checked, ect), figure out front driveshaft clearance issue >(more on this later) - Need to buy c-yoke and u joints > >Get rear driveshaft converted to CV - In the works > >Find/make t-case skid plate - Located one I like > >Wheel!!!! - Need gas and time!! > >What's on your list? > >Carl > Pretty easy ----. Right now, I have to remove the rear diff cover and pull the right axle shaft so I can grind off the back of a stripped stud to get the flat tire off my Wrangler. My kidlet had a flat whilst borrowing my jeep and whoever had the wheel off to fix it so I wouldn't know cross threaded a stud putting it back on. -- Old Crow "Yol Bolson!" '82 FLTC-P "Miss Pearl" '95 YJ Rio Grande BS#133, SENS, TOMKAT, MAMBM -- Posted via a free Usenet account from http://www.teranews.com |
Re: To Do list...
On Mon, 24 Sep 2007 19:26:43 -0700, "Carl S"
<carlsaiyed@REMOVE.hotmail.com> wrote: >OK gang, here's my To Do list... > >Install rear locker -Have parts > >Install TNT frame stiffeners - In mail, then @ painters > >Install AJ's super rails - In mail, then @ painters > >Install new Hella 550 fog lamps - Have parts > >Install front and rear tow hooks - In mail > >Fabricate cowl vent intake - Still designing/fabbing flanges > >Front brakes and front axle U joints - Need to buy parts > >Rebuild new (boneyard) front driveshaft, (new u joints and centering yoke, >have balance checked, ect), figure out front driveshaft clearance issue >(more on this later) - Need to buy c-yoke and u joints > >Get rear driveshaft converted to CV - In the works > >Find/make t-case skid plate - Located one I like > >Wheel!!!! - Need gas and time!! > >What's on your list? > >Carl > Pretty easy ----. Right now, I have to remove the rear diff cover and pull the right axle shaft so I can grind off the back of a stripped stud to get the flat tire off my Wrangler. My kidlet had a flat whilst borrowing my jeep and whoever had the wheel off to fix it so I wouldn't know cross threaded a stud putting it back on. -- Old Crow "Yol Bolson!" '82 FLTC-P "Miss Pearl" '95 YJ Rio Grande BS#133, SENS, TOMKAT, MAMBM -- Posted via a free Usenet account from http://www.teranews.com |
Re: To Do list...
On Mon, 24 Sep 2007 19:26:43 -0700, "Carl S"
<carlsaiyed@REMOVE.hotmail.com> wrote: >OK gang, here's my To Do list... > >Install rear locker -Have parts > >Install TNT frame stiffeners - In mail, then @ painters > >Install AJ's super rails - In mail, then @ painters > >Install new Hella 550 fog lamps - Have parts > >Install front and rear tow hooks - In mail > >Fabricate cowl vent intake - Still designing/fabbing flanges > >Front brakes and front axle U joints - Need to buy parts > >Rebuild new (boneyard) front driveshaft, (new u joints and centering yoke, >have balance checked, ect), figure out front driveshaft clearance issue >(more on this later) - Need to buy c-yoke and u joints > >Get rear driveshaft converted to CV - In the works > >Find/make t-case skid plate - Located one I like > >Wheel!!!! - Need gas and time!! > >What's on your list? > >Carl > Pretty easy ----. Right now, I have to remove the rear diff cover and pull the right axle shaft so I can grind off the back of a stripped stud to get the flat tire off my Wrangler. My kidlet had a flat whilst borrowing my jeep and whoever had the wheel off to fix it so I wouldn't know cross threaded a stud putting it back on. -- Old Crow "Yol Bolson!" '82 FLTC-P "Miss Pearl" '95 YJ Rio Grande BS#133, SENS, TOMKAT, MAMBM -- Posted via a free Usenet account from http://www.teranews.com |
Re: To Do list...
I have my CJ frame sandblasted and primed sitting in garage, think my
to-do list is longer then your's. "Carl S" <carlsaiyed@REMOVE.hotmail.com> wrote in message news:zL6dna69_IeY72XbnZ2dnUVZ_t6onZ2d@comcast.com. .. > OK gang, here's my To Do list... > > Install rear locker -Have parts > > Install TNT frame stiffeners - In mail, then @ painters > > Install AJ's super rails - In mail, then @ painters > > Install new Hella 550 fog lamps - Have parts > > Install front and rear tow hooks - In mail > > Fabricate cowl vent intake - Still designing/fabbing flanges > > Front brakes and front axle U joints - Need to buy parts > > Rebuild new (boneyard) front driveshaft, (new u joints and centering yoke, > have balance checked, ect), figure out front driveshaft clearance issue > (more on this later) - Need to buy c-yoke and u joints > > Get rear driveshaft converted to CV - In the works > > Find/make t-case skid plate - Located one I like > > Wheel!!!! - Need gas and time!! > > What's on your list? > > Carl > |
All times are GMT -4. The time now is 05:38 PM. |
© 2024 MH Sub I, LLC dba Internet Brands