Re: To Do list...
 

I have my CJ frame sandblasted and primed sitting in garage, think my
to-do list is longer then your's.

"Carl S" <carlsaiyed@REMOVE.hotmail.com> wrote in message
news:zL6dna69_IeY72XbnZ2dnUVZ_t6onZ2d@comcast.com. ..
> OK gang, here's my To Do list...
>
> Install rear locker -Have parts
>
> Install TNT frame stiffeners - In mail, then @ painters
>
> Install AJ's super rails - In mail, then @ painters
>
> Install new Hella 550 fog lamps - Have parts
>
> Install front and rear tow hooks - In mail
>
> Fabricate cowl vent intake - Still designing/fabbing flanges
>
> Front brakes and front axle U joints - Need to buy parts
>
> Rebuild new (boneyard) front driveshaft, (new u joints and centering yoke,
> have balance checked, ect), figure out front driveshaft clearance issue
> (more on this later) - Need to buy c-yoke and u joints
>
> Get rear driveshaft converted to CV - In the works
>
> Find/make t-case skid plate - Located one I like
>
> Wheel!!!! - Need gas and time!!
>
> What's on your list?
>
> Carl
>

Re: To Do list...
 

I have my CJ frame sandblasted and primed sitting in garage, think my
to-do list is longer then your's.

"Carl S" <carlsaiyed@REMOVE.hotmail.com> wrote in message
news:zL6dna69_IeY72XbnZ2dnUVZ_t6onZ2d@comcast.com. ..
> OK gang, here's my To Do list...
>
> Install rear locker -Have parts
>
> Install TNT frame stiffeners - In mail, then @ painters
>
> Install AJ's super rails - In mail, then @ painters
>
> Install new Hella 550 fog lamps - Have parts
>
> Install front and rear tow hooks - In mail
>
> Fabricate cowl vent intake - Still designing/fabbing flanges
>
> Front brakes and front axle U joints - Need to buy parts
>
> Rebuild new (boneyard) front driveshaft, (new u joints and centering yoke,
> have balance checked, ect), figure out front driveshaft clearance issue
> (more on this later) - Need to buy c-yoke and u joints
>
> Get rear driveshaft converted to CV - In the works
>
> Find/make t-case skid plate - Located one I like
>
> Wheel!!!! - Need gas and time!!
>
> What's on your list?
>
> Carl
>

Re: To Do list...
 

I have my CJ frame sandblasted and primed sitting in garage, think my
to-do list is longer then your's.

"Carl S" <carlsaiyed@REMOVE.hotmail.com> wrote in message
news:zL6dna69_IeY72XbnZ2dnUVZ_t6onZ2d@comcast.com. ..
> OK gang, here's my To Do list...
>
> Install rear locker -Have parts
>
> Install TNT frame stiffeners - In mail, then @ painters
>
> Install AJ's super rails - In mail, then @ painters
>
> Install new Hella 550 fog lamps - Have parts
>
> Install front and rear tow hooks - In mail
>
> Fabricate cowl vent intake - Still designing/fabbing flanges
>
> Front brakes and front axle U joints - Need to buy parts
>
> Rebuild new (boneyard) front driveshaft, (new u joints and centering yoke,
> have balance checked, ect), figure out front driveshaft clearance issue
> (more on this later) - Need to buy c-yoke and u joints
>
> Get rear driveshaft converted to CV - In the works
>
> Find/make t-case skid plate - Located one I like
>
> Wheel!!!! - Need gas and time!!
>
> What's on your list?
>
> Carl
>

Re: To Do list...
 

Rotate tires before the snow flies

Need more $$$$ to make my list longer - cause you know there is alot to do
:-)


"Carl S" <carlsaiyed@REMOVE.hotmail.com> wrote in message
news:zL6dna69_IeY72XbnZ2dnUVZ_t6onZ2d@comcast.com. ..
> OK gang, here's my To Do list...
>
> Install rear locker -Have parts
>
> Install TNT frame stiffeners - In mail, then @ painters
>
> Install AJ's super rails - In mail, then @ painters
>
> Install new Hella 550 fog lamps - Have parts
>
> Install front and rear tow hooks - In mail
>
> Fabricate cowl vent intake - Still designing/fabbing flanges
>
> Front brakes and front axle U joints - Need to buy parts
>
> Rebuild new (boneyard) front driveshaft, (new u joints and centering yoke,
> have balance checked, ect), figure out front driveshaft clearance issue
> (more on this later) - Need to buy c-yoke and u joints
>
> Get rear driveshaft converted to CV - In the works
>
> Find/make t-case skid plate - Located one I like
>
> Wheel!!!! - Need gas and time!!
>
> What's on your list?
>
> Carl
>

Re: To Do list...
 

Rotate tires before the snow flies

Need more $$$$ to make my list longer - cause you know there is alot to do
:-)


"Carl S" <carlsaiyed@REMOVE.hotmail.com> wrote in message
news:zL6dna69_IeY72XbnZ2dnUVZ_t6onZ2d@comcast.com. ..
> OK gang, here's my To Do list...
>
> Install rear locker -Have parts
>
> Install TNT frame stiffeners - In mail, then @ painters
>
> Install AJ's super rails - In mail, then @ painters
>
> Install new Hella 550 fog lamps - Have parts
>
> Install front and rear tow hooks - In mail
>
> Fabricate cowl vent intake - Still designing/fabbing flanges
>
> Front brakes and front axle U joints - Need to buy parts
>
> Rebuild new (boneyard) front driveshaft, (new u joints and centering yoke,
> have balance checked, ect), figure out front driveshaft clearance issue
> (more on this later) - Need to buy c-yoke and u joints
>
> Get rear driveshaft converted to CV - In the works
>
> Find/make t-case skid plate - Located one I like
>
> Wheel!!!! - Need gas and time!!
>
> What's on your list?
>
> Carl
>

Re: To Do list...
 

Rotate tires before the snow flies

Need more $$$$ to make my list longer - cause you know there is alot to do
:-)


"Carl S" <carlsaiyed@REMOVE.hotmail.com> wrote in message
news:zL6dna69_IeY72XbnZ2dnUVZ_t6onZ2d@comcast.com. ..
> OK gang, here's my To Do list...
>
> Install rear locker -Have parts
>
> Install TNT frame stiffeners - In mail, then @ painters
>
> Install AJ's super rails - In mail, then @ painters
>
> Install new Hella 550 fog lamps - Have parts
>
> Install front and rear tow hooks - In mail
>
> Fabricate cowl vent intake - Still designing/fabbing flanges
>
> Front brakes and front axle U joints - Need to buy parts
>
> Rebuild new (boneyard) front driveshaft, (new u joints and centering yoke,
> have balance checked, ect), figure out front driveshaft clearance issue
> (more on this later) - Need to buy c-yoke and u joints
>
> Get rear driveshaft converted to CV - In the works
>
> Find/make t-case skid plate - Located one I like
>
> Wheel!!!! - Need gas and time!!
>
> What's on your list?
>
> Carl
>

Re: To Do list...
 

Rotate tires before the snow flies

Need more $$$$ to make my list longer - cause you know there is alot to do
:-)


"Carl S" <carlsaiyed@REMOVE.hotmail.com> wrote in message
news:zL6dna69_IeY72XbnZ2dnUVZ_t6onZ2d@comcast.com. ..
> OK gang, here's my To Do list...
>
> Install rear locker -Have parts
>
> Install TNT frame stiffeners - In mail, then @ painters
>
> Install AJ's super rails - In mail, then @ painters
>
> Install new Hella 550 fog lamps - Have parts
>
> Install front and rear tow hooks - In mail
>
> Fabricate cowl vent intake - Still designing/fabbing flanges
>
> Front brakes and front axle U joints - Need to buy parts
>
> Rebuild new (boneyard) front driveshaft, (new u joints and centering yoke,
> have balance checked, ect), figure out front driveshaft clearance issue
> (more on this later) - Need to buy c-yoke and u joints
>
> Get rear driveshaft converted to CV - In the works
>
> Find/make t-case skid plate - Located one I like
>
> Wheel!!!! - Need gas and time!!
>
> What's on your list?
>
> Carl
>

Re: To Do list...
 

Good luck: http://www.saturdaybang.com/jeep/#prev
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/


"Greg" <greglc84@hotmail.com> wrote in message
news:XK8Ki.237480$fJ5.27503@pd7urf1no...
> I have my CJ frame sandblasted and primed sitting in garage, think my
> to-do list is longer then your's.



--
Posted via a free Usenet account from http://www.teranews.com

Re: To Do list...
 

Good luck: http://www.saturdaybang.com/jeep/#prev
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/


"Greg" <greglc84@hotmail.com> wrote in message
news:XK8Ki.237480$fJ5.27503@pd7urf1no...
> I have my CJ frame sandblasted and primed sitting in garage, think my
> to-do list is longer then your's.



--
Posted via a free Usenet account from http://www.teranews.com

Re: To Do list...
 

Good luck: http://www.saturdaybang.com/jeep/#prev
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/


"Greg" <greglc84@hotmail.com> wrote in message
news:XK8Ki.237480$fJ5.27503@pd7urf1no...
> I have my CJ frame sandblasted and primed sitting in garage, think my
> to-do list is longer then your's.



--
Posted via a free Usenet account from http://www.teranews.com