Disconnected wire
#1
Guest
Posts: n/a
Disconnected wire
Hi all,
This is on a '93 2.5L YJ.
I've just run across a wire near the MAP sensor that's been
disconnected, and it looks like it should be connected to something. It
was just tucked behind the valve cover, and I don't like the idea of
bare contacts being "just tucked behind" anything.
http://i2.tinypic.com/xqm5js.jpg
http://i3.tinypic.com/xqm4xx.jpg
http://i2.tinypic.com/xqm33t.jpg
It's a brown and yellow wire, and the only thing I see in my Chilton's
that has that color is related to the starter/clutch interlock switch,
and if that's what it is, that would explain why it'll start with the
clutch out. :)
Problem is, I don't see anything to plug it into that it will reach.
There isn't much wire between where it exits the harness and it's tip.
Am I on the right track? /If/ I wanted to plug it in, where would I?
TIA.
--
~/Garth - 1993 Wrangler S 2.5
{ }|||||||{ } "MukYJ"
This is on a '93 2.5L YJ.
I've just run across a wire near the MAP sensor that's been
disconnected, and it looks like it should be connected to something. It
was just tucked behind the valve cover, and I don't like the idea of
bare contacts being "just tucked behind" anything.
http://i2.tinypic.com/xqm5js.jpg
http://i3.tinypic.com/xqm4xx.jpg
http://i2.tinypic.com/xqm33t.jpg
It's a brown and yellow wire, and the only thing I see in my Chilton's
that has that color is related to the starter/clutch interlock switch,
and if that's what it is, that would explain why it'll start with the
clutch out. :)
Problem is, I don't see anything to plug it into that it will reach.
There isn't much wire between where it exits the harness and it's tip.
Am I on the right track? /If/ I wanted to plug it in, where would I?
TIA.
--
~/Garth - 1993 Wrangler S 2.5
{ }|||||||{ } "MukYJ"
#2
Guest
Posts: n/a
Re: Disconnected wire
There are on some cars a wire that should be connected for the engine to
operate correctly in high altitudes. Could this be it? Maybe somebody with
more knowledge in this group could give an answer.
Odd-Inge Larsen
"Garth Almgren" <nospam@v6stang.com> wrote in message
news:4cicu5F15uuigU1@individual.net...
> Hi all,
>
> This is on a '93 2.5L YJ.
>
> I've just run across a wire near the MAP sensor that's been
> disconnected, and it looks like it should be connected to something. It
> was just tucked behind the valve cover, and I don't like the idea of
> bare contacts being "just tucked behind" anything.
>
> http://i2.tinypic.com/xqm5js.jpg
> http://i3.tinypic.com/xqm4xx.jpg
> http://i2.tinypic.com/xqm33t.jpg
>
> It's a brown and yellow wire, and the only thing I see in my Chilton's
> that has that color is related to the starter/clutch interlock switch,
> and if that's what it is, that would explain why it'll start with the
> clutch out. :)
>
> Problem is, I don't see anything to plug it into that it will reach.
> There isn't much wire between where it exits the harness and it's tip.
>
> Am I on the right track? /If/ I wanted to plug it in, where would I?
>
> TIA.
> --
> ~/Garth - 1993 Wrangler S 2.5
> { }|||||||{ } "MukYJ"
operate correctly in high altitudes. Could this be it? Maybe somebody with
more knowledge in this group could give an answer.
Odd-Inge Larsen
"Garth Almgren" <nospam@v6stang.com> wrote in message
news:4cicu5F15uuigU1@individual.net...
> Hi all,
>
> This is on a '93 2.5L YJ.
>
> I've just run across a wire near the MAP sensor that's been
> disconnected, and it looks like it should be connected to something. It
> was just tucked behind the valve cover, and I don't like the idea of
> bare contacts being "just tucked behind" anything.
>
> http://i2.tinypic.com/xqm5js.jpg
> http://i3.tinypic.com/xqm4xx.jpg
> http://i2.tinypic.com/xqm33t.jpg
>
> It's a brown and yellow wire, and the only thing I see in my Chilton's
> that has that color is related to the starter/clutch interlock switch,
> and if that's what it is, that would explain why it'll start with the
> clutch out. :)
>
> Problem is, I don't see anything to plug it into that it will reach.
> There isn't much wire between where it exits the harness and it's tip.
>
> Am I on the right track? /If/ I wanted to plug it in, where would I?
>
> TIA.
> --
> ~/Garth - 1993 Wrangler S 2.5
> { }|||||||{ } "MukYJ"
#3
Guest
Posts: n/a
Re: Disconnected wire
There are on some cars a wire that should be connected for the engine to
operate correctly in high altitudes. Could this be it? Maybe somebody with
more knowledge in this group could give an answer.
Odd-Inge Larsen
"Garth Almgren" <nospam@v6stang.com> wrote in message
news:4cicu5F15uuigU1@individual.net...
> Hi all,
>
> This is on a '93 2.5L YJ.
>
> I've just run across a wire near the MAP sensor that's been
> disconnected, and it looks like it should be connected to something. It
> was just tucked behind the valve cover, and I don't like the idea of
> bare contacts being "just tucked behind" anything.
>
> http://i2.tinypic.com/xqm5js.jpg
> http://i3.tinypic.com/xqm4xx.jpg
> http://i2.tinypic.com/xqm33t.jpg
>
> It's a brown and yellow wire, and the only thing I see in my Chilton's
> that has that color is related to the starter/clutch interlock switch,
> and if that's what it is, that would explain why it'll start with the
> clutch out. :)
>
> Problem is, I don't see anything to plug it into that it will reach.
> There isn't much wire between where it exits the harness and it's tip.
>
> Am I on the right track? /If/ I wanted to plug it in, where would I?
>
> TIA.
> --
> ~/Garth - 1993 Wrangler S 2.5
> { }|||||||{ } "MukYJ"
operate correctly in high altitudes. Could this be it? Maybe somebody with
more knowledge in this group could give an answer.
Odd-Inge Larsen
"Garth Almgren" <nospam@v6stang.com> wrote in message
news:4cicu5F15uuigU1@individual.net...
> Hi all,
>
> This is on a '93 2.5L YJ.
>
> I've just run across a wire near the MAP sensor that's been
> disconnected, and it looks like it should be connected to something. It
> was just tucked behind the valve cover, and I don't like the idea of
> bare contacts being "just tucked behind" anything.
>
> http://i2.tinypic.com/xqm5js.jpg
> http://i3.tinypic.com/xqm4xx.jpg
> http://i2.tinypic.com/xqm33t.jpg
>
> It's a brown and yellow wire, and the only thing I see in my Chilton's
> that has that color is related to the starter/clutch interlock switch,
> and if that's what it is, that would explain why it'll start with the
> clutch out. :)
>
> Problem is, I don't see anything to plug it into that it will reach.
> There isn't much wire between where it exits the harness and it's tip.
>
> Am I on the right track? /If/ I wanted to plug it in, where would I?
>
> TIA.
> --
> ~/Garth - 1993 Wrangler S 2.5
> { }|||||||{ } "MukYJ"
#4
Guest
Posts: n/a
Re: Disconnected wire
There are on some cars a wire that should be connected for the engine to
operate correctly in high altitudes. Could this be it? Maybe somebody with
more knowledge in this group could give an answer.
Odd-Inge Larsen
"Garth Almgren" <nospam@v6stang.com> wrote in message
news:4cicu5F15uuigU1@individual.net...
> Hi all,
>
> This is on a '93 2.5L YJ.
>
> I've just run across a wire near the MAP sensor that's been
> disconnected, and it looks like it should be connected to something. It
> was just tucked behind the valve cover, and I don't like the idea of
> bare contacts being "just tucked behind" anything.
>
> http://i2.tinypic.com/xqm5js.jpg
> http://i3.tinypic.com/xqm4xx.jpg
> http://i2.tinypic.com/xqm33t.jpg
>
> It's a brown and yellow wire, and the only thing I see in my Chilton's
> that has that color is related to the starter/clutch interlock switch,
> and if that's what it is, that would explain why it'll start with the
> clutch out. :)
>
> Problem is, I don't see anything to plug it into that it will reach.
> There isn't much wire between where it exits the harness and it's tip.
>
> Am I on the right track? /If/ I wanted to plug it in, where would I?
>
> TIA.
> --
> ~/Garth - 1993 Wrangler S 2.5
> { }|||||||{ } "MukYJ"
operate correctly in high altitudes. Could this be it? Maybe somebody with
more knowledge in this group could give an answer.
Odd-Inge Larsen
"Garth Almgren" <nospam@v6stang.com> wrote in message
news:4cicu5F15uuigU1@individual.net...
> Hi all,
>
> This is on a '93 2.5L YJ.
>
> I've just run across a wire near the MAP sensor that's been
> disconnected, and it looks like it should be connected to something. It
> was just tucked behind the valve cover, and I don't like the idea of
> bare contacts being "just tucked behind" anything.
>
> http://i2.tinypic.com/xqm5js.jpg
> http://i3.tinypic.com/xqm4xx.jpg
> http://i2.tinypic.com/xqm33t.jpg
>
> It's a brown and yellow wire, and the only thing I see in my Chilton's
> that has that color is related to the starter/clutch interlock switch,
> and if that's what it is, that would explain why it'll start with the
> clutch out. :)
>
> Problem is, I don't see anything to plug it into that it will reach.
> There isn't much wire between where it exits the harness and it's tip.
>
> Am I on the right track? /If/ I wanted to plug it in, where would I?
>
> TIA.
> --
> ~/Garth - 1993 Wrangler S 2.5
> { }|||||||{ } "MukYJ"
#5
Guest
Posts: n/a
Re: Disconnected wire
On the '91 engines there was a temp sender on the left rear corner of
head. Location and wire length look right for this. This was only for
the gauge or idiot light. The emissions temp sensor is in the front on
the thermostat housing.
--
jeff
Garth Almgren wrote:
> Hi all,
>
> This is on a '93 2.5L YJ.
>
> I've just run across a wire near the MAP sensor that's been
> disconnected, and it looks like it should be connected to something. It
> was just tucked behind the valve cover, and I don't like the idea of
> bare contacts being "just tucked behind" anything.
>
> http://i2.tinypic.com/xqm5js.jpg
> http://i3.tinypic.com/xqm4xx.jpg
> http://i2.tinypic.com/xqm33t.jpg
>
> It's a brown and yellow wire, and the only thing I see in my Chilton's
> that has that color is related to the starter/clutch interlock switch,
> and if that's what it is, that would explain why it'll start with the
> clutch out. :)
>
> Problem is, I don't see anything to plug it into that it will reach.
> There isn't much wire between where it exits the harness and it's tip.
>
> Am I on the right track? /If/ I wanted to plug it in, where would I?
>
> TIA.
head. Location and wire length look right for this. This was only for
the gauge or idiot light. The emissions temp sensor is in the front on
the thermostat housing.
--
jeff
Garth Almgren wrote:
> Hi all,
>
> This is on a '93 2.5L YJ.
>
> I've just run across a wire near the MAP sensor that's been
> disconnected, and it looks like it should be connected to something. It
> was just tucked behind the valve cover, and I don't like the idea of
> bare contacts being "just tucked behind" anything.
>
> http://i2.tinypic.com/xqm5js.jpg
> http://i3.tinypic.com/xqm4xx.jpg
> http://i2.tinypic.com/xqm33t.jpg
>
> It's a brown and yellow wire, and the only thing I see in my Chilton's
> that has that color is related to the starter/clutch interlock switch,
> and if that's what it is, that would explain why it'll start with the
> clutch out. :)
>
> Problem is, I don't see anything to plug it into that it will reach.
> There isn't much wire between where it exits the harness and it's tip.
>
> Am I on the right track? /If/ I wanted to plug it in, where would I?
>
> TIA.
#6
Guest
Posts: n/a
Re: Disconnected wire
On the '91 engines there was a temp sender on the left rear corner of
head. Location and wire length look right for this. This was only for
the gauge or idiot light. The emissions temp sensor is in the front on
the thermostat housing.
--
jeff
Garth Almgren wrote:
> Hi all,
>
> This is on a '93 2.5L YJ.
>
> I've just run across a wire near the MAP sensor that's been
> disconnected, and it looks like it should be connected to something. It
> was just tucked behind the valve cover, and I don't like the idea of
> bare contacts being "just tucked behind" anything.
>
> http://i2.tinypic.com/xqm5js.jpg
> http://i3.tinypic.com/xqm4xx.jpg
> http://i2.tinypic.com/xqm33t.jpg
>
> It's a brown and yellow wire, and the only thing I see in my Chilton's
> that has that color is related to the starter/clutch interlock switch,
> and if that's what it is, that would explain why it'll start with the
> clutch out. :)
>
> Problem is, I don't see anything to plug it into that it will reach.
> There isn't much wire between where it exits the harness and it's tip.
>
> Am I on the right track? /If/ I wanted to plug it in, where would I?
>
> TIA.
head. Location and wire length look right for this. This was only for
the gauge or idiot light. The emissions temp sensor is in the front on
the thermostat housing.
--
jeff
Garth Almgren wrote:
> Hi all,
>
> This is on a '93 2.5L YJ.
>
> I've just run across a wire near the MAP sensor that's been
> disconnected, and it looks like it should be connected to something. It
> was just tucked behind the valve cover, and I don't like the idea of
> bare contacts being "just tucked behind" anything.
>
> http://i2.tinypic.com/xqm5js.jpg
> http://i3.tinypic.com/xqm4xx.jpg
> http://i2.tinypic.com/xqm33t.jpg
>
> It's a brown and yellow wire, and the only thing I see in my Chilton's
> that has that color is related to the starter/clutch interlock switch,
> and if that's what it is, that would explain why it'll start with the
> clutch out. :)
>
> Problem is, I don't see anything to plug it into that it will reach.
> There isn't much wire between where it exits the harness and it's tip.
>
> Am I on the right track? /If/ I wanted to plug it in, where would I?
>
> TIA.
#7
Guest
Posts: n/a
Re: Disconnected wire
On the '91 engines there was a temp sender on the left rear corner of
head. Location and wire length look right for this. This was only for
the gauge or idiot light. The emissions temp sensor is in the front on
the thermostat housing.
--
jeff
Garth Almgren wrote:
> Hi all,
>
> This is on a '93 2.5L YJ.
>
> I've just run across a wire near the MAP sensor that's been
> disconnected, and it looks like it should be connected to something. It
> was just tucked behind the valve cover, and I don't like the idea of
> bare contacts being "just tucked behind" anything.
>
> http://i2.tinypic.com/xqm5js.jpg
> http://i3.tinypic.com/xqm4xx.jpg
> http://i2.tinypic.com/xqm33t.jpg
>
> It's a brown and yellow wire, and the only thing I see in my Chilton's
> that has that color is related to the starter/clutch interlock switch,
> and if that's what it is, that would explain why it'll start with the
> clutch out. :)
>
> Problem is, I don't see anything to plug it into that it will reach.
> There isn't much wire between where it exits the harness and it's tip.
>
> Am I on the right track? /If/ I wanted to plug it in, where would I?
>
> TIA.
head. Location and wire length look right for this. This was only for
the gauge or idiot light. The emissions temp sensor is in the front on
the thermostat housing.
--
jeff
Garth Almgren wrote:
> Hi all,
>
> This is on a '93 2.5L YJ.
>
> I've just run across a wire near the MAP sensor that's been
> disconnected, and it looks like it should be connected to something. It
> was just tucked behind the valve cover, and I don't like the idea of
> bare contacts being "just tucked behind" anything.
>
> http://i2.tinypic.com/xqm5js.jpg
> http://i3.tinypic.com/xqm4xx.jpg
> http://i2.tinypic.com/xqm33t.jpg
>
> It's a brown and yellow wire, and the only thing I see in my Chilton's
> that has that color is related to the starter/clutch interlock switch,
> and if that's what it is, that would explain why it'll start with the
> clutch out. :)
>
> Problem is, I don't see anything to plug it into that it will reach.
> There isn't much wire between where it exits the harness and it's tip.
>
> Am I on the right track? /If/ I wanted to plug it in, where would I?
>
> TIA.
#8
Guest
Posts: n/a
Re: Disconnected wire
There is a brown wire that may be for for AC control. Do you have AC in
the Jeep?
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Canadian Off Road Trips Photos: Non members can still view!
Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
(More Off Road album links at bottom of the view page)
Garth Almgren wrote:
>
> Hi all,
>
> This is on a '93 2.5L YJ.
>
> I've just run across a wire near the MAP sensor that's been
> disconnected, and it looks like it should be connected to something. It
> was just tucked behind the valve cover, and I don't like the idea of
> bare contacts being "just tucked behind" anything.
>
> http://i2.tinypic.com/xqm5js.jpg
> http://i3.tinypic.com/xqm4xx.jpg
> http://i2.tinypic.com/xqm33t.jpg
>
> It's a brown and yellow wire, and the only thing I see in my Chilton's
> that has that color is related to the starter/clutch interlock switch,
> and if that's what it is, that would explain why it'll start with the
> clutch out. :)
>
> Problem is, I don't see anything to plug it into that it will reach.
> There isn't much wire between where it exits the harness and it's tip.
>
> Am I on the right track? /If/ I wanted to plug it in, where would I?
>
> TIA.
> --
> ~/Garth - 1993 Wrangler S 2.5
> { }|||||||{ } "MukYJ"
the Jeep?
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Canadian Off Road Trips Photos: Non members can still view!
Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
(More Off Road album links at bottom of the view page)
Garth Almgren wrote:
>
> Hi all,
>
> This is on a '93 2.5L YJ.
>
> I've just run across a wire near the MAP sensor that's been
> disconnected, and it looks like it should be connected to something. It
> was just tucked behind the valve cover, and I don't like the idea of
> bare contacts being "just tucked behind" anything.
>
> http://i2.tinypic.com/xqm5js.jpg
> http://i3.tinypic.com/xqm4xx.jpg
> http://i2.tinypic.com/xqm33t.jpg
>
> It's a brown and yellow wire, and the only thing I see in my Chilton's
> that has that color is related to the starter/clutch interlock switch,
> and if that's what it is, that would explain why it'll start with the
> clutch out. :)
>
> Problem is, I don't see anything to plug it into that it will reach.
> There isn't much wire between where it exits the harness and it's tip.
>
> Am I on the right track? /If/ I wanted to plug it in, where would I?
>
> TIA.
> --
> ~/Garth - 1993 Wrangler S 2.5
> { }|||||||{ } "MukYJ"
#9
Guest
Posts: n/a
Re: Disconnected wire
There is a brown wire that may be for for AC control. Do you have AC in
the Jeep?
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Canadian Off Road Trips Photos: Non members can still view!
Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
(More Off Road album links at bottom of the view page)
Garth Almgren wrote:
>
> Hi all,
>
> This is on a '93 2.5L YJ.
>
> I've just run across a wire near the MAP sensor that's been
> disconnected, and it looks like it should be connected to something. It
> was just tucked behind the valve cover, and I don't like the idea of
> bare contacts being "just tucked behind" anything.
>
> http://i2.tinypic.com/xqm5js.jpg
> http://i3.tinypic.com/xqm4xx.jpg
> http://i2.tinypic.com/xqm33t.jpg
>
> It's a brown and yellow wire, and the only thing I see in my Chilton's
> that has that color is related to the starter/clutch interlock switch,
> and if that's what it is, that would explain why it'll start with the
> clutch out. :)
>
> Problem is, I don't see anything to plug it into that it will reach.
> There isn't much wire between where it exits the harness and it's tip.
>
> Am I on the right track? /If/ I wanted to plug it in, where would I?
>
> TIA.
> --
> ~/Garth - 1993 Wrangler S 2.5
> { }|||||||{ } "MukYJ"
the Jeep?
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Canadian Off Road Trips Photos: Non members can still view!
Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
(More Off Road album links at bottom of the view page)
Garth Almgren wrote:
>
> Hi all,
>
> This is on a '93 2.5L YJ.
>
> I've just run across a wire near the MAP sensor that's been
> disconnected, and it looks like it should be connected to something. It
> was just tucked behind the valve cover, and I don't like the idea of
> bare contacts being "just tucked behind" anything.
>
> http://i2.tinypic.com/xqm5js.jpg
> http://i3.tinypic.com/xqm4xx.jpg
> http://i2.tinypic.com/xqm33t.jpg
>
> It's a brown and yellow wire, and the only thing I see in my Chilton's
> that has that color is related to the starter/clutch interlock switch,
> and if that's what it is, that would explain why it'll start with the
> clutch out. :)
>
> Problem is, I don't see anything to plug it into that it will reach.
> There isn't much wire between where it exits the harness and it's tip.
>
> Am I on the right track? /If/ I wanted to plug it in, where would I?
>
> TIA.
> --
> ~/Garth - 1993 Wrangler S 2.5
> { }|||||||{ } "MukYJ"
#10
Guest
Posts: n/a
Re: Disconnected wire
There is a brown wire that may be for for AC control. Do you have AC in
the Jeep?
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Canadian Off Road Trips Photos: Non members can still view!
Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
(More Off Road album links at bottom of the view page)
Garth Almgren wrote:
>
> Hi all,
>
> This is on a '93 2.5L YJ.
>
> I've just run across a wire near the MAP sensor that's been
> disconnected, and it looks like it should be connected to something. It
> was just tucked behind the valve cover, and I don't like the idea of
> bare contacts being "just tucked behind" anything.
>
> http://i2.tinypic.com/xqm5js.jpg
> http://i3.tinypic.com/xqm4xx.jpg
> http://i2.tinypic.com/xqm33t.jpg
>
> It's a brown and yellow wire, and the only thing I see in my Chilton's
> that has that color is related to the starter/clutch interlock switch,
> and if that's what it is, that would explain why it'll start with the
> clutch out. :)
>
> Problem is, I don't see anything to plug it into that it will reach.
> There isn't much wire between where it exits the harness and it's tip.
>
> Am I on the right track? /If/ I wanted to plug it in, where would I?
>
> TIA.
> --
> ~/Garth - 1993 Wrangler S 2.5
> { }|||||||{ } "MukYJ"
the Jeep?
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Canadian Off Road Trips Photos: Non members can still view!
Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
(More Off Road album links at bottom of the view page)
Garth Almgren wrote:
>
> Hi all,
>
> This is on a '93 2.5L YJ.
>
> I've just run across a wire near the MAP sensor that's been
> disconnected, and it looks like it should be connected to something. It
> was just tucked behind the valve cover, and I don't like the idea of
> bare contacts being "just tucked behind" anything.
>
> http://i2.tinypic.com/xqm5js.jpg
> http://i3.tinypic.com/xqm4xx.jpg
> http://i2.tinypic.com/xqm33t.jpg
>
> It's a brown and yellow wire, and the only thing I see in my Chilton's
> that has that color is related to the starter/clutch interlock switch,
> and if that's what it is, that would explain why it'll start with the
> clutch out. :)
>
> Problem is, I don't see anything to plug it into that it will reach.
> There isn't much wire between where it exits the harness and it's tip.
>
> Am I on the right track? /If/ I wanted to plug it in, where would I?
>
> TIA.
> --
> ~/Garth - 1993 Wrangler S 2.5
> { }|||||||{ } "MukYJ"