dipstick tube leaks
12-13-2003, 12:39 PM
#1
Guest
Posts: n/a
dipstick tube leaks
The girl I want (but that's another story) just got a 92 Cherokee from
her mother-in-law, and the dipstick tube is loose and leaking where it
enters the engine block. Can this be fixed with some JB Weld, or does
it have to be replaced? And can I do this myself, or is it better to
let a nechanic do it? It sounds routine to me and probably is but I
wonder if there's any quirks particular to Jeep. The engine is an
inline 6 w/ 5-speed trans.
TIA
Tom
Seattle
her mother-in-law, and the dipstick tube is loose and leaking where it
enters the engine block. Can this be fixed with some JB Weld, or does
it have to be replaced? And can I do this myself, or is it better to
let a nechanic do it? It sounds routine to me and probably is but I
wonder if there's any quirks particular to Jeep. The engine is an
inline 6 w/ 5-speed trans.
TIA
Tom
Seattle
12-13-2003, 07:50 PM
#2
Guest
Posts: n/a
Re: dipstick tube leaks
Pull the tube & if it's not DRASTICALLY loose, clean it, RTV it (red,
black or grey), reinstall it, let sit overnite, problem solved. It
should have a mounting bracket somewhere upstream to support it. If
not, find where it broke off & weld it back on. If the tube is
unsupported , gluing it in will be a short lived fix. Good luck.
black or grey), reinstall it, let sit overnite, problem solved. It
should have a mounting bracket somewhere upstream to support it. If
not, find where it broke off & weld it back on. If the tube is
unsupported , gluing it in will be a short lived fix. Good luck.
12-13-2003, 07:50 PM
#3
Guest
Posts: n/a
Re: dipstick tube leaks
Pull the tube & if it's not DRASTICALLY loose, clean it, RTV it (red,
black or grey), reinstall it, let sit overnite, problem solved. It
should have a mounting bracket somewhere upstream to support it. If
not, find where it broke off & weld it back on. If the tube is
unsupported , gluing it in will be a short lived fix. Good luck.
black or grey), reinstall it, let sit overnite, problem solved. It
should have a mounting bracket somewhere upstream to support it. If
not, find where it broke off & weld it back on. If the tube is
unsupported , gluing it in will be a short lived fix. Good luck.
12-13-2003, 07:50 PM
#4
Guest
Posts: n/a
Re: dipstick tube leaks
Pull the tube & if it's not DRASTICALLY loose, clean it, RTV it (red,
black or grey), reinstall it, let sit overnite, problem solved. It
should have a mounting bracket somewhere upstream to support it. If
not, find where it broke off & weld it back on. If the tube is
unsupported , gluing it in will be a short lived fix. Good luck.
black or grey), reinstall it, let sit overnite, problem solved. It
should have a mounting bracket somewhere upstream to support it. If
not, find where it broke off & weld it back on. If the tube is
unsupported , gluing it in will be a short lived fix. Good luck.
12-13-2003, 09:58 PM
#5
Guest
Posts: n/a
Re: dipstick tube leaks
Thanks. what's RTV? (D'oh!)
On 13 Dec 2003 16:50:53 -0800, weavcowinory@aol.com (PA-ter) wrote:
>Pull the tube & if it's not DRASTICALLY loose, clean it, RTV it (red,
>black or grey), reinstall it, let sit overnite, problem solved. It
>should have a mounting bracket somewhere upstream to support it. If
>not, find where it broke off & weld it back on. If the tube is
>unsupported , gluing it in will be a short lived fix. Good luck.
On 13 Dec 2003 16:50:53 -0800, weavcowinory@aol.com (PA-ter) wrote:
>Pull the tube & if it's not DRASTICALLY loose, clean it, RTV it (red,
>black or grey), reinstall it, let sit overnite, problem solved. It
>should have a mounting bracket somewhere upstream to support it. If
>not, find where it broke off & weld it back on. If the tube is
>unsupported , gluing it in will be a short lived fix. Good luck.
12-13-2003, 09:58 PM
#6
Guest
Posts: n/a
Re: dipstick tube leaks
Thanks. what's RTV? (D'oh!)
On 13 Dec 2003 16:50:53 -0800, weavcowinory@aol.com (PA-ter) wrote:
>Pull the tube & if it's not DRASTICALLY loose, clean it, RTV it (red,
>black or grey), reinstall it, let sit overnite, problem solved. It
>should have a mounting bracket somewhere upstream to support it. If
>not, find where it broke off & weld it back on. If the tube is
>unsupported , gluing it in will be a short lived fix. Good luck.
On 13 Dec 2003 16:50:53 -0800, weavcowinory@aol.com (PA-ter) wrote:
>Pull the tube & if it's not DRASTICALLY loose, clean it, RTV it (red,
>black or grey), reinstall it, let sit overnite, problem solved. It
>should have a mounting bracket somewhere upstream to support it. If
>not, find where it broke off & weld it back on. If the tube is
>unsupported , gluing it in will be a short lived fix. Good luck.
12-13-2003, 09:58 PM
#7
Guest
Posts: n/a
Re: dipstick tube leaks
Thanks. what's RTV? (D'oh!)
On 13 Dec 2003 16:50:53 -0800, weavcowinory@aol.com (PA-ter) wrote:
>Pull the tube & if it's not DRASTICALLY loose, clean it, RTV it (red,
>black or grey), reinstall it, let sit overnite, problem solved. It
>should have a mounting bracket somewhere upstream to support it. If
>not, find where it broke off & weld it back on. If the tube is
>unsupported , gluing it in will be a short lived fix. Good luck.
On 13 Dec 2003 16:50:53 -0800, weavcowinory@aol.com (PA-ter) wrote:
>Pull the tube & if it's not DRASTICALLY loose, clean it, RTV it (red,
>black or grey), reinstall it, let sit overnite, problem solved. It
>should have a mounting bracket somewhere upstream to support it. If
>not, find where it broke off & weld it back on. If the tube is
>unsupported , gluing it in will be a short lived fix. Good luck.
12-13-2003, 10:11 PM
#8
Guest
Posts: n/a
Re: dipstick tube leaks
"Frank Zappa" <melgibson@owesmefivebucks.com> wrote in message news:aekntv8a7f9dbdbb2169eule2tp4lrhjqs@4ax.com...
: Thanks. what's RTV? (D'oh!)
:
:
The full name is RTV Silicone. Sold in tubes, like caulk, as
an adhesive/sealer.
RTV stands for Room Temperature Vulcanizing.
Dave
12-13-2003, 10:11 PM
#9
Guest
Posts: n/a
Re: dipstick tube leaks
"Frank Zappa" <melgibson@owesmefivebucks.com> wrote in message news:aekntv8a7f9dbdbb2169eule2tp4lrhjqs@4ax.com...
: Thanks. what's RTV? (D'oh!)
:
:
The full name is RTV Silicone. Sold in tubes, like caulk, as
an adhesive/sealer.
RTV stands for Room Temperature Vulcanizing.
Dave
12-13-2003, 10:11 PM
#10
Guest
Posts: n/a
Re: dipstick tube leaks
"Frank Zappa" <melgibson@owesmefivebucks.com> wrote in message news:aekntv8a7f9dbdbb2169eule2tp4lrhjqs@4ax.com...
: Thanks. what's RTV? (D'oh!)
:
:
The full name is RTV Silicone. Sold in tubes, like caulk, as
an adhesive/sealer.
RTV stands for Room Temperature Vulcanizing.
Dave
