Differential Gasket???
Guest
Posts: n/a
Re: Differential Gasket???
I always use silicone, both sides of the gasket. But I'm sure you will get
varied opinions here.
--
JimG
80' CJ-7 258 CID
35" BFG MT on 15x10 Centerlines
D44 Rear, Dana 30 Front. SOA
4.56 Gears, LockRight F&R
Dana 300 w/4:1 & Currie twin sticks
Warn X8000i w/ dual batteries
"Paul Brogren" <pibrogren@msn.com> wrote in message
news:bmkodh$mqq3b$1@ID-190695.news.uni-berlin.de...
> I can't remember, if the cover gasket is supposed to be installed dry? No
> silicone needed right?
>
> --
> Thanks Always !!!
> Paul '75 CJ5 258
> Vail, CO.
>
>
varied opinions here.
--
JimG
80' CJ-7 258 CID
35" BFG MT on 15x10 Centerlines
D44 Rear, Dana 30 Front. SOA
4.56 Gears, LockRight F&R
Dana 300 w/4:1 & Currie twin sticks
Warn X8000i w/ dual batteries
"Paul Brogren" <pibrogren@msn.com> wrote in message
news:bmkodh$mqq3b$1@ID-190695.news.uni-berlin.de...
> I can't remember, if the cover gasket is supposed to be installed dry? No
> silicone needed right?
>
> --
> Thanks Always !!!
> Paul '75 CJ5 258
> Vail, CO.
>
>
Guest
Posts: n/a
Re: Differential Gasket???
I always use silicone, both sides of the gasket. But I'm sure you will get
varied opinions here.
--
JimG
80' CJ-7 258 CID
35" BFG MT on 15x10 Centerlines
D44 Rear, Dana 30 Front. SOA
4.56 Gears, LockRight F&R
Dana 300 w/4:1 & Currie twin sticks
Warn X8000i w/ dual batteries
"Paul Brogren" <pibrogren@msn.com> wrote in message
news:bmkodh$mqq3b$1@ID-190695.news.uni-berlin.de...
> I can't remember, if the cover gasket is supposed to be installed dry? No
> silicone needed right?
>
> --
> Thanks Always !!!
> Paul '75 CJ5 258
> Vail, CO.
>
>
varied opinions here.
--
JimG
80' CJ-7 258 CID
35" BFG MT on 15x10 Centerlines
D44 Rear, Dana 30 Front. SOA
4.56 Gears, LockRight F&R
Dana 300 w/4:1 & Currie twin sticks
Warn X8000i w/ dual batteries
"Paul Brogren" <pibrogren@msn.com> wrote in message
news:bmkodh$mqq3b$1@ID-190695.news.uni-berlin.de...
> I can't remember, if the cover gasket is supposed to be installed dry? No
> silicone needed right?
>
> --
> Thanks Always !!!
> Paul '75 CJ5 258
> Vail, CO.
>
>
Guest
Posts: n/a
Re: Differential Gasket???
I always use silicone, both sides of the gasket. But I'm sure you will get
varied opinions here.
--
JimG
80' CJ-7 258 CID
35" BFG MT on 15x10 Centerlines
D44 Rear, Dana 30 Front. SOA
4.56 Gears, LockRight F&R
Dana 300 w/4:1 & Currie twin sticks
Warn X8000i w/ dual batteries
"Paul Brogren" <pibrogren@msn.com> wrote in message
news:bmkodh$mqq3b$1@ID-190695.news.uni-berlin.de...
> I can't remember, if the cover gasket is supposed to be installed dry? No
> silicone needed right?
>
> --
> Thanks Always !!!
> Paul '75 CJ5 258
> Vail, CO.
>
>
varied opinions here.
--
JimG
80' CJ-7 258 CID
35" BFG MT on 15x10 Centerlines
D44 Rear, Dana 30 Front. SOA
4.56 Gears, LockRight F&R
Dana 300 w/4:1 & Currie twin sticks
Warn X8000i w/ dual batteries
"Paul Brogren" <pibrogren@msn.com> wrote in message
news:bmkodh$mqq3b$1@ID-190695.news.uni-berlin.de...
> I can't remember, if the cover gasket is supposed to be installed dry? No
> silicone needed right?
>
> --
> Thanks Always !!!
> Paul '75 CJ5 258
> Vail, CO.
>
>
Guest
Posts: n/a
Re: Differential Gasket???
Use 3/4 tube of RTV with no gasket, works just fine on my 82. Its
easier to use RTV rather gaskets because you don't have to go buy
gaskets every time you change out your fluid.
On Thu, 16 Oct 2003 00:40:52 GMT, "JimG" <jimg@cj7.com> wrote:
>I always use silicone, both sides of the gasket. But I'm sure you will get
>varied opinions here.
easier to use RTV rather gaskets because you don't have to go buy
gaskets every time you change out your fluid.
On Thu, 16 Oct 2003 00:40:52 GMT, "JimG" <jimg@cj7.com> wrote:
>I always use silicone, both sides of the gasket. But I'm sure you will get
>varied opinions here.
Guest
Posts: n/a
Re: Differential Gasket???
Use 3/4 tube of RTV with no gasket, works just fine on my 82. Its
easier to use RTV rather gaskets because you don't have to go buy
gaskets every time you change out your fluid.
On Thu, 16 Oct 2003 00:40:52 GMT, "JimG" <jimg@cj7.com> wrote:
>I always use silicone, both sides of the gasket. But I'm sure you will get
>varied opinions here.
easier to use RTV rather gaskets because you don't have to go buy
gaskets every time you change out your fluid.
On Thu, 16 Oct 2003 00:40:52 GMT, "JimG" <jimg@cj7.com> wrote:
>I always use silicone, both sides of the gasket. But I'm sure you will get
>varied opinions here.
Guest
Posts: n/a
Re: Differential Gasket???
Use 3/4 tube of RTV with no gasket, works just fine on my 82. Its
easier to use RTV rather gaskets because you don't have to go buy
gaskets every time you change out your fluid.
On Thu, 16 Oct 2003 00:40:52 GMT, "JimG" <jimg@cj7.com> wrote:
>I always use silicone, both sides of the gasket. But I'm sure you will get
>varied opinions here.
easier to use RTV rather gaskets because you don't have to go buy
gaskets every time you change out your fluid.
On Thu, 16 Oct 2003 00:40:52 GMT, "JimG" <jimg@cj7.com> wrote:
>I always use silicone, both sides of the gasket. But I'm sure you will get
>varied opinions here.
Guest
Posts: n/a
Re: Differential Gasket???
TJs just use instant gasket - don't know about CJs. However, it is common
practice on cars which do have a gasket to use instant gasket on both sides.
Give it a bit of a smear with the finger - let the solvent evaporate for a
bit, and then let it cure overnight before re-filling. Also make sure there
is instant gasket on the inside of the bolt holes (or it will leak out
there).
Dave Milne, Scotland
'99 TJ 4.0 Sahara
"Paul Brogren" <pibrogren@msn.com> wrote in message
news:bmkodh$mqq3b$1@ID-190695.news.uni-berlin.de...
: I can't remember, if the cover gasket is supposed to be installed dry? No
: silicone needed right?
:
: --
: Thanks Always !!!
: Paul '75 CJ5 258
: Vail, CO.
:
:
practice on cars which do have a gasket to use instant gasket on both sides.
Give it a bit of a smear with the finger - let the solvent evaporate for a
bit, and then let it cure overnight before re-filling. Also make sure there
is instant gasket on the inside of the bolt holes (or it will leak out
there).
Dave Milne, Scotland
'99 TJ 4.0 Sahara
"Paul Brogren" <pibrogren@msn.com> wrote in message
news:bmkodh$mqq3b$1@ID-190695.news.uni-berlin.de...
: I can't remember, if the cover gasket is supposed to be installed dry? No
: silicone needed right?
:
: --
: Thanks Always !!!
: Paul '75 CJ5 258
: Vail, CO.
:
:
Guest
Posts: n/a
Re: Differential Gasket???
TJs just use instant gasket - don't know about CJs. However, it is common
practice on cars which do have a gasket to use instant gasket on both sides.
Give it a bit of a smear with the finger - let the solvent evaporate for a
bit, and then let it cure overnight before re-filling. Also make sure there
is instant gasket on the inside of the bolt holes (or it will leak out
there).
Dave Milne, Scotland
'99 TJ 4.0 Sahara
"Paul Brogren" <pibrogren@msn.com> wrote in message
news:bmkodh$mqq3b$1@ID-190695.news.uni-berlin.de...
: I can't remember, if the cover gasket is supposed to be installed dry? No
: silicone needed right?
:
: --
: Thanks Always !!!
: Paul '75 CJ5 258
: Vail, CO.
:
:
practice on cars which do have a gasket to use instant gasket on both sides.
Give it a bit of a smear with the finger - let the solvent evaporate for a
bit, and then let it cure overnight before re-filling. Also make sure there
is instant gasket on the inside of the bolt holes (or it will leak out
there).
Dave Milne, Scotland
'99 TJ 4.0 Sahara
"Paul Brogren" <pibrogren@msn.com> wrote in message
news:bmkodh$mqq3b$1@ID-190695.news.uni-berlin.de...
: I can't remember, if the cover gasket is supposed to be installed dry? No
: silicone needed right?
:
: --
: Thanks Always !!!
: Paul '75 CJ5 258
: Vail, CO.
:
:
Guest
Posts: n/a
Re: Differential Gasket???
TJs just use instant gasket - don't know about CJs. However, it is common
practice on cars which do have a gasket to use instant gasket on both sides.
Give it a bit of a smear with the finger - let the solvent evaporate for a
bit, and then let it cure overnight before re-filling. Also make sure there
is instant gasket on the inside of the bolt holes (or it will leak out
there).
Dave Milne, Scotland
'99 TJ 4.0 Sahara
"Paul Brogren" <pibrogren@msn.com> wrote in message
news:bmkodh$mqq3b$1@ID-190695.news.uni-berlin.de...
: I can't remember, if the cover gasket is supposed to be installed dry? No
: silicone needed right?
:
: --
: Thanks Always !!!
: Paul '75 CJ5 258
: Vail, CO.
:
:
practice on cars which do have a gasket to use instant gasket on both sides.
Give it a bit of a smear with the finger - let the solvent evaporate for a
bit, and then let it cure overnight before re-filling. Also make sure there
is instant gasket on the inside of the bolt holes (or it will leak out
there).
Dave Milne, Scotland
'99 TJ 4.0 Sahara
"Paul Brogren" <pibrogren@msn.com> wrote in message
news:bmkodh$mqq3b$1@ID-190695.news.uni-berlin.de...
: I can't remember, if the cover gasket is supposed to be installed dry? No
: silicone needed right?
:
: --
: Thanks Always !!!
: Paul '75 CJ5 258
: Vail, CO.
:
:
