Difference in Quality in U-Bolts on a Lift Kit
01-23-2004, 02:31 PM
#1
Guest
Posts: n/a
Difference in Quality in U-Bolts on a Lift Kit
Well, they did it to me again. After giving them the exact measurments on
my CJ U-Bolts they sent me another set of the exact same wrong size that
they originally sent me!!! I wasted a week waiting for these things and now
I have to wait again. I'm extremely pissed to say the least.
So I call Deaver Spring in Santa Ana as Robert Bills suggested and they
charge 60.00 for the set and the fellow there said the quality will be
better than what I get with the kit. Can anyone tell me the difference in
quality between the two U-Bolts. Deaver said I would be getting about a
Grade 2 from the kit people and he would provide me with a Grade 5.
Would the grade that I get from the Superlift kit ever bend or stretch out?
Has anyone ever had this happen to them?
Thanks,
bill
my CJ U-Bolts they sent me another set of the exact same wrong size that
they originally sent me!!! I wasted a week waiting for these things and now
I have to wait again. I'm extremely pissed to say the least.
So I call Deaver Spring in Santa Ana as Robert Bills suggested and they
charge 60.00 for the set and the fellow there said the quality will be
better than what I get with the kit. Can anyone tell me the difference in
quality between the two U-Bolts. Deaver said I would be getting about a
Grade 2 from the kit people and he would provide me with a Grade 5.
Would the grade that I get from the Superlift kit ever bend or stretch out?
Has anyone ever had this happen to them?
Thanks,
bill
01-23-2004, 03:01 PM
#2
Guest
Posts: n/a
Re: Difference in Quality in U-Bolts on a Lift Kit
>o I call Deaver Spring in Santa Ana as Robert Bills suggested and they
>charge 60.00 for the set and the fellow there said the quality will be
>better than what I get with the kit. Can anyone tell me the difference in
>quality between the two U-Bolts. Deaver said I would be getting about a
>Grade 2 from the kit people and he would provide me with a Grade 5.
>
>Would the grade that I get from the Superlift kit ever bend or stretch out?
The u-bolts and hardware you will get from Deaver Spring are superior to the
stuff from Superlift, and will fit. Go to Deaver.
Robert Bills
KG6LMV
Orange County CA
http://www.outdoorwire.com/4x4/jeep/...p-l/billsr.htm
http://www.RobertBills.com
>charge 60.00 for the set and the fellow there said the quality will be
>better than what I get with the kit. Can anyone tell me the difference in
>quality between the two U-Bolts. Deaver said I would be getting about a
>Grade 2 from the kit people and he would provide me with a Grade 5.
>
>Would the grade that I get from the Superlift kit ever bend or stretch out?
The u-bolts and hardware you will get from Deaver Spring are superior to the
stuff from Superlift, and will fit. Go to Deaver.
Robert Bills
KG6LMV
Orange County CA
http://www.outdoorwire.com/4x4/jeep/...p-l/billsr.htm
http://www.RobertBills.com
01-23-2004, 03:01 PM
#3
Guest
Posts: n/a
Re: Difference in Quality in U-Bolts on a Lift Kit
>o I call Deaver Spring in Santa Ana as Robert Bills suggested and they
>charge 60.00 for the set and the fellow there said the quality will be
>better than what I get with the kit. Can anyone tell me the difference in
>quality between the two U-Bolts. Deaver said I would be getting about a
>Grade 2 from the kit people and he would provide me with a Grade 5.
>
>Would the grade that I get from the Superlift kit ever bend or stretch out?
The u-bolts and hardware you will get from Deaver Spring are superior to the
stuff from Superlift, and will fit. Go to Deaver.
Robert Bills
KG6LMV
Orange County CA
http://www.outdoorwire.com/4x4/jeep/...p-l/billsr.htm
http://www.RobertBills.com
>charge 60.00 for the set and the fellow there said the quality will be
>better than what I get with the kit. Can anyone tell me the difference in
>quality between the two U-Bolts. Deaver said I would be getting about a
>Grade 2 from the kit people and he would provide me with a Grade 5.
>
>Would the grade that I get from the Superlift kit ever bend or stretch out?
The u-bolts and hardware you will get from Deaver Spring are superior to the
stuff from Superlift, and will fit. Go to Deaver.
Robert Bills
KG6LMV
Orange County CA
http://www.outdoorwire.com/4x4/jeep/...p-l/billsr.htm
http://www.RobertBills.com
01-23-2004, 03:01 PM
#4
Guest
Posts: n/a
Re: Difference in Quality in U-Bolts on a Lift Kit
>o I call Deaver Spring in Santa Ana as Robert Bills suggested and they
>charge 60.00 for the set and the fellow there said the quality will be
>better than what I get with the kit. Can anyone tell me the difference in
>quality between the two U-Bolts. Deaver said I would be getting about a
>Grade 2 from the kit people and he would provide me with a Grade 5.
>
>Would the grade that I get from the Superlift kit ever bend or stretch out?
The u-bolts and hardware you will get from Deaver Spring are superior to the
stuff from Superlift, and will fit. Go to Deaver.
Robert Bills
KG6LMV
Orange County CA
http://www.outdoorwire.com/4x4/jeep/...p-l/billsr.htm
http://www.RobertBills.com
>charge 60.00 for the set and the fellow there said the quality will be
>better than what I get with the kit. Can anyone tell me the difference in
>quality between the two U-Bolts. Deaver said I would be getting about a
>Grade 2 from the kit people and he would provide me with a Grade 5.
>
>Would the grade that I get from the Superlift kit ever bend or stretch out?
The u-bolts and hardware you will get from Deaver Spring are superior to the
stuff from Superlift, and will fit. Go to Deaver.
Robert Bills
KG6LMV
Orange County CA
http://www.outdoorwire.com/4x4/jeep/...p-l/billsr.htm
http://www.RobertBills.com
01-23-2004, 06:01 PM
#5
Guest
Posts: n/a
Re: Difference in Quality in U-Bolts on a Lift Kit
"William Oliveri" <wuji@bigvalley.net> wrote in message
news:bursgl$jepg6$1@ID-193866.news.uni-berlin.de...
> Well, they did it to me again. After giving them the exact measurments on
> my CJ U-Bolts they sent me another set of the exact same wrong size that
> they originally sent me!!! I wasted a week waiting for these things and
now
> I have to wait again. I'm extremely pissed to say the least.
>
> So I call Deaver Spring in Santa Ana as Robert Bills suggested and they
> charge 60.00 for the set and the fellow there said the quality will be
> better than what I get with the kit. Can anyone tell me the difference in
> quality between the two U-Bolts. Deaver said I would be getting about a
> Grade 2 from the kit people and he would provide me with a Grade 5.
>
> Would the grade that I get from the Superlift kit ever bend or stretch
out?
> Has anyone ever had this happen to them?
>
I seriously doubt you are getting a Grade 2 ubolt for an automotive
application. If the ubolts fit the plate, then they are the right size. I
got my springs from 4WheelParts Wholesalers, and the ubolts are the right
size. And, they are in Irvine, not far from you.
01-23-2004, 06:01 PM
#6
Guest
Posts: n/a
Re: Difference in Quality in U-Bolts on a Lift Kit
"William Oliveri" <wuji@bigvalley.net> wrote in message
news:bursgl$jepg6$1@ID-193866.news.uni-berlin.de...
> Well, they did it to me again. After giving them the exact measurments on
> my CJ U-Bolts they sent me another set of the exact same wrong size that
> they originally sent me!!! I wasted a week waiting for these things and
now
> I have to wait again. I'm extremely pissed to say the least.
>
> So I call Deaver Spring in Santa Ana as Robert Bills suggested and they
> charge 60.00 for the set and the fellow there said the quality will be
> better than what I get with the kit. Can anyone tell me the difference in
> quality between the two U-Bolts. Deaver said I would be getting about a
> Grade 2 from the kit people and he would provide me with a Grade 5.
>
> Would the grade that I get from the Superlift kit ever bend or stretch
out?
> Has anyone ever had this happen to them?
>
I seriously doubt you are getting a Grade 2 ubolt for an automotive
application. If the ubolts fit the plate, then they are the right size. I
got my springs from 4WheelParts Wholesalers, and the ubolts are the right
size. And, they are in Irvine, not far from you.
01-23-2004, 06:01 PM
#7
Guest
Posts: n/a
Re: Difference in Quality in U-Bolts on a Lift Kit
"William Oliveri" <wuji@bigvalley.net> wrote in message
news:bursgl$jepg6$1@ID-193866.news.uni-berlin.de...
> Well, they did it to me again. After giving them the exact measurments on
> my CJ U-Bolts they sent me another set of the exact same wrong size that
> they originally sent me!!! I wasted a week waiting for these things and
now
> I have to wait again. I'm extremely pissed to say the least.
>
> So I call Deaver Spring in Santa Ana as Robert Bills suggested and they
> charge 60.00 for the set and the fellow there said the quality will be
> better than what I get with the kit. Can anyone tell me the difference in
> quality between the two U-Bolts. Deaver said I would be getting about a
> Grade 2 from the kit people and he would provide me with a Grade 5.
>
> Would the grade that I get from the Superlift kit ever bend or stretch
out?
> Has anyone ever had this happen to them?
>
I seriously doubt you are getting a Grade 2 ubolt for an automotive
application. If the ubolts fit the plate, then they are the right size. I
got my springs from 4WheelParts Wholesalers, and the ubolts are the right
size. And, they are in Irvine, not far from you.
01-23-2004, 06:11 PM
#8
Guest
Posts: n/a
Re: Difference in Quality in U-Bolts on a Lift Kit
Where in Irvine? I couldn't find a listing.
"CRWLR" <beerman@yahoo.com> wrote in message
news:1013a22q8ap2k17@corp.supernews.com...
>
> "William Oliveri" <wuji@bigvalley.net> wrote in message
> news:bursgl$jepg6$1@ID-193866.news.uni-berlin.de...
> > Well, they did it to me again. After giving them the exact measurments
on
> > my CJ U-Bolts they sent me another set of the exact same wrong size that
> > they originally sent me!!! I wasted a week waiting for these things and
> now
> > I have to wait again. I'm extremely pissed to say the least.
> >
> > So I call Deaver Spring in Santa Ana as Robert Bills suggested and they
> > charge 60.00 for the set and the fellow there said the quality will be
> > better than what I get with the kit. Can anyone tell me the difference
in
> > quality between the two U-Bolts. Deaver said I would be getting about a
> > Grade 2 from the kit people and he would provide me with a Grade 5.
> >
> > Would the grade that I get from the Superlift kit ever bend or stretch
> out?
> > Has anyone ever had this happen to them?
> >
>
>
> I seriously doubt you are getting a Grade 2 ubolt for an automotive
> application. If the ubolts fit the plate, then they are the right size. I
> got my springs from 4WheelParts Wholesalers, and the ubolts are the right
> size. And, they are in Irvine, not far from you.
>
>
>
"CRWLR" <beerman@yahoo.com> wrote in message
news:1013a22q8ap2k17@corp.supernews.com...
>
> "William Oliveri" <wuji@bigvalley.net> wrote in message
> news:bursgl$jepg6$1@ID-193866.news.uni-berlin.de...
> > Well, they did it to me again. After giving them the exact measurments
on
> > my CJ U-Bolts they sent me another set of the exact same wrong size that
> > they originally sent me!!! I wasted a week waiting for these things and
> now
> > I have to wait again. I'm extremely pissed to say the least.
> >
> > So I call Deaver Spring in Santa Ana as Robert Bills suggested and they
> > charge 60.00 for the set and the fellow there said the quality will be
> > better than what I get with the kit. Can anyone tell me the difference
in
> > quality between the two U-Bolts. Deaver said I would be getting about a
> > Grade 2 from the kit people and he would provide me with a Grade 5.
> >
> > Would the grade that I get from the Superlift kit ever bend or stretch
> out?
> > Has anyone ever had this happen to them?
> >
>
>
> I seriously doubt you are getting a Grade 2 ubolt for an automotive
> application. If the ubolts fit the plate, then they are the right size. I
> got my springs from 4WheelParts Wholesalers, and the ubolts are the right
> size. And, they are in Irvine, not far from you.
>
>
>
01-23-2004, 06:11 PM
#9
Guest
Posts: n/a
Re: Difference in Quality in U-Bolts on a Lift Kit
Where in Irvine? I couldn't find a listing.
"CRWLR" <beerman@yahoo.com> wrote in message
news:1013a22q8ap2k17@corp.supernews.com...
>
> "William Oliveri" <wuji@bigvalley.net> wrote in message
> news:bursgl$jepg6$1@ID-193866.news.uni-berlin.de...
> > Well, they did it to me again. After giving them the exact measurments
on
> > my CJ U-Bolts they sent me another set of the exact same wrong size that
> > they originally sent me!!! I wasted a week waiting for these things and
> now
> > I have to wait again. I'm extremely pissed to say the least.
> >
> > So I call Deaver Spring in Santa Ana as Robert Bills suggested and they
> > charge 60.00 for the set and the fellow there said the quality will be
> > better than what I get with the kit. Can anyone tell me the difference
in
> > quality between the two U-Bolts. Deaver said I would be getting about a
> > Grade 2 from the kit people and he would provide me with a Grade 5.
> >
> > Would the grade that I get from the Superlift kit ever bend or stretch
> out?
> > Has anyone ever had this happen to them?
> >
>
>
> I seriously doubt you are getting a Grade 2 ubolt for an automotive
> application. If the ubolts fit the plate, then they are the right size. I
> got my springs from 4WheelParts Wholesalers, and the ubolts are the right
> size. And, they are in Irvine, not far from you.
>
>
>
"CRWLR" <beerman@yahoo.com> wrote in message
news:1013a22q8ap2k17@corp.supernews.com...
>
> "William Oliveri" <wuji@bigvalley.net> wrote in message
> news:bursgl$jepg6$1@ID-193866.news.uni-berlin.de...
> > Well, they did it to me again. After giving them the exact measurments
on
> > my CJ U-Bolts they sent me another set of the exact same wrong size that
> > they originally sent me!!! I wasted a week waiting for these things and
> now
> > I have to wait again. I'm extremely pissed to say the least.
> >
> > So I call Deaver Spring in Santa Ana as Robert Bills suggested and they
> > charge 60.00 for the set and the fellow there said the quality will be
> > better than what I get with the kit. Can anyone tell me the difference
in
> > quality between the two U-Bolts. Deaver said I would be getting about a
> > Grade 2 from the kit people and he would provide me with a Grade 5.
> >
> > Would the grade that I get from the Superlift kit ever bend or stretch
> out?
> > Has anyone ever had this happen to them?
> >
>
>
> I seriously doubt you are getting a Grade 2 ubolt for an automotive
> application. If the ubolts fit the plate, then they are the right size. I
> got my springs from 4WheelParts Wholesalers, and the ubolts are the right
> size. And, they are in Irvine, not far from you.
>
>
>
01-23-2004, 06:11 PM
#10
Guest
Posts: n/a
Re: Difference in Quality in U-Bolts on a Lift Kit
Where in Irvine? I couldn't find a listing.
"CRWLR" <beerman@yahoo.com> wrote in message
news:1013a22q8ap2k17@corp.supernews.com...
>
> "William Oliveri" <wuji@bigvalley.net> wrote in message
> news:bursgl$jepg6$1@ID-193866.news.uni-berlin.de...
> > Well, they did it to me again. After giving them the exact measurments
on
> > my CJ U-Bolts they sent me another set of the exact same wrong size that
> > they originally sent me!!! I wasted a week waiting for these things and
> now
> > I have to wait again. I'm extremely pissed to say the least.
> >
> > So I call Deaver Spring in Santa Ana as Robert Bills suggested and they
> > charge 60.00 for the set and the fellow there said the quality will be
> > better than what I get with the kit. Can anyone tell me the difference
in
> > quality between the two U-Bolts. Deaver said I would be getting about a
> > Grade 2 from the kit people and he would provide me with a Grade 5.
> >
> > Would the grade that I get from the Superlift kit ever bend or stretch
> out?
> > Has anyone ever had this happen to them?
> >
>
>
> I seriously doubt you are getting a Grade 2 ubolt for an automotive
> application. If the ubolts fit the plate, then they are the right size. I
> got my springs from 4WheelParts Wholesalers, and the ubolts are the right
> size. And, they are in Irvine, not far from you.
>
>
>
"CRWLR" <beerman@yahoo.com> wrote in message
news:1013a22q8ap2k17@corp.supernews.com...
>
> "William Oliveri" <wuji@bigvalley.net> wrote in message
> news:bursgl$jepg6$1@ID-193866.news.uni-berlin.de...
> > Well, they did it to me again. After giving them the exact measurments
on
> > my CJ U-Bolts they sent me another set of the exact same wrong size that
> > they originally sent me!!! I wasted a week waiting for these things and
> now
> > I have to wait again. I'm extremely pissed to say the least.
> >
> > So I call Deaver Spring in Santa Ana as Robert Bills suggested and they
> > charge 60.00 for the set and the fellow there said the quality will be
> > better than what I get with the kit. Can anyone tell me the difference
in
> > quality between the two U-Bolts. Deaver said I would be getting about a
> > Grade 2 from the kit people and he would provide me with a Grade 5.
> >
> > Would the grade that I get from the Superlift kit ever bend or stretch
> out?
> > Has anyone ever had this happen to them?
> >
>
>
> I seriously doubt you are getting a Grade 2 ubolt for an automotive
> application. If the ubolts fit the plate, then they are the right size. I
> got my springs from 4WheelParts Wholesalers, and the ubolts are the right
> size. And, they are in Irvine, not far from you.
>
>
>
