detroit locker problem
#41
Guest
Posts: n/a
Re: Re: Re: detroit locker problem
"SnoMan" <admin@snoman.com> wrote in message
news:itcna3h3o7mhl9bbjtkft6ncuch8ilkaun@4ax.com...
> On Sat, 28 Jul 2007 13:35:12 GMT, "Jeff Strickland"
> <crwlr@verizon.net> wrote:
>
>>You should stick to things you know (which would limit your posts, sorry).
>>
>>It is clear that you do not have a Detroit Locker. I happen to agree with
>>you though, the D35 is not up to the task of a Detroit and 35s. Having
>>said
>>that, the axle shafts in a D35 should have been upgraded to what they call
>>a
>>Super35 when the Detroit was installed.
>
>
> Again you are the one that show how clueless you are. Sure your super
> 35 (a D35 with upgraded axles) STILL HAS A 7.562 DIAMETER RING GEAR!!!
> This ring gear size limits the saive and streght of the carrier inside
> it and it torque capacity. BTW, the "Super" part is replace weak axles
> but there is still desing torque limitations because of carrier size
> relative to tire size and that is why they make bigger axle assemblies
> but there will always be those like you that think whent you upgrade
> the axles in a D35 that there is not other weak links and that it is
> almost as good as a 44 and if this was the case then they could save
> millions of dollars by never even using 44's and just use your Super
> 35. You need to look at the bigger picture because your tunnel vision
> tends to limit your grasp on things like this.
You have no idea. None.
I know precisely what the Super35 is, and I also know what the weakness is
in the D35.
Stick to things you know ...
#42
Guest
Posts: n/a
Re: Re: detroit locker problem
On Sat, 28 Jul 2007 13:53:31 GMT, "Jeff Strickland"
<crwlr@verizon.net> wrote:
>I have a full Detroit in my AMC20, and an EZ Locker in the D30 on my front
>axle. I've been driving my CJ with the front hubs locked constantly for
>years, and I never have any problem from the front.
The AMC20 is a much stronger axle than a D35 as it has a 1.3 inch
bigger ring gear and a much larger carrier plus it has 8 7/16 inch
bolt hold ring gear on vs 8ea 3/8 inch ones on the D35 which are also
on a smaller radius relative to axle center line too on D35 the the
difference is very apparent. If the AMC 20 has had a one piece axle
upgrade I would easily place it above a stock D44 in strength.
-----------------
TheSnoMan.com
<crwlr@verizon.net> wrote:
>I have a full Detroit in my AMC20, and an EZ Locker in the D30 on my front
>axle. I've been driving my CJ with the front hubs locked constantly for
>years, and I never have any problem from the front.
The AMC20 is a much stronger axle than a D35 as it has a 1.3 inch
bigger ring gear and a much larger carrier plus it has 8 7/16 inch
bolt hold ring gear on vs 8ea 3/8 inch ones on the D35 which are also
on a smaller radius relative to axle center line too on D35 the the
difference is very apparent. If the AMC 20 has had a one piece axle
upgrade I would easily place it above a stock D44 in strength.
-----------------
TheSnoMan.com
#43
Guest
Posts: n/a
Re: Re: detroit locker problem
On Sat, 28 Jul 2007 13:53:31 GMT, "Jeff Strickland"
<crwlr@verizon.net> wrote:
>I have a full Detroit in my AMC20, and an EZ Locker in the D30 on my front
>axle. I've been driving my CJ with the front hubs locked constantly for
>years, and I never have any problem from the front.
The AMC20 is a much stronger axle than a D35 as it has a 1.3 inch
bigger ring gear and a much larger carrier plus it has 8 7/16 inch
bolt hold ring gear on vs 8ea 3/8 inch ones on the D35 which are also
on a smaller radius relative to axle center line too on D35 the the
difference is very apparent. If the AMC 20 has had a one piece axle
upgrade I would easily place it above a stock D44 in strength.
-----------------
TheSnoMan.com
<crwlr@verizon.net> wrote:
>I have a full Detroit in my AMC20, and an EZ Locker in the D30 on my front
>axle. I've been driving my CJ with the front hubs locked constantly for
>years, and I never have any problem from the front.
The AMC20 is a much stronger axle than a D35 as it has a 1.3 inch
bigger ring gear and a much larger carrier plus it has 8 7/16 inch
bolt hold ring gear on vs 8ea 3/8 inch ones on the D35 which are also
on a smaller radius relative to axle center line too on D35 the the
difference is very apparent. If the AMC 20 has had a one piece axle
upgrade I would easily place it above a stock D44 in strength.
-----------------
TheSnoMan.com
#44
Guest
Posts: n/a
Re: Re: detroit locker problem
On Sat, 28 Jul 2007 13:53:31 GMT, "Jeff Strickland"
<crwlr@verizon.net> wrote:
>I have a full Detroit in my AMC20, and an EZ Locker in the D30 on my front
>axle. I've been driving my CJ with the front hubs locked constantly for
>years, and I never have any problem from the front.
The AMC20 is a much stronger axle than a D35 as it has a 1.3 inch
bigger ring gear and a much larger carrier plus it has 8 7/16 inch
bolt hold ring gear on vs 8ea 3/8 inch ones on the D35 which are also
on a smaller radius relative to axle center line too on D35 the the
difference is very apparent. If the AMC 20 has had a one piece axle
upgrade I would easily place it above a stock D44 in strength.
-----------------
TheSnoMan.com
<crwlr@verizon.net> wrote:
>I have a full Detroit in my AMC20, and an EZ Locker in the D30 on my front
>axle. I've been driving my CJ with the front hubs locked constantly for
>years, and I never have any problem from the front.
The AMC20 is a much stronger axle than a D35 as it has a 1.3 inch
bigger ring gear and a much larger carrier plus it has 8 7/16 inch
bolt hold ring gear on vs 8ea 3/8 inch ones on the D35 which are also
on a smaller radius relative to axle center line too on D35 the the
difference is very apparent. If the AMC 20 has had a one piece axle
upgrade I would easily place it above a stock D44 in strength.
-----------------
TheSnoMan.com
#45
Guest
Posts: n/a
Re: Re: detroit locker problem
On Sat, 28 Jul 2007 13:53:31 GMT, "Jeff Strickland"
<crwlr@verizon.net> wrote:
>I have a full Detroit in my AMC20, and an EZ Locker in the D30 on my front
>axle. I've been driving my CJ with the front hubs locked constantly for
>years, and I never have any problem from the front.
The AMC20 is a much stronger axle than a D35 as it has a 1.3 inch
bigger ring gear and a much larger carrier plus it has 8 7/16 inch
bolt hold ring gear on vs 8ea 3/8 inch ones on the D35 which are also
on a smaller radius relative to axle center line too on D35 the the
difference is very apparent. If the AMC 20 has had a one piece axle
upgrade I would easily place it above a stock D44 in strength.
-----------------
TheSnoMan.com
<crwlr@verizon.net> wrote:
>I have a full Detroit in my AMC20, and an EZ Locker in the D30 on my front
>axle. I've been driving my CJ with the front hubs locked constantly for
>years, and I never have any problem from the front.
The AMC20 is a much stronger axle than a D35 as it has a 1.3 inch
bigger ring gear and a much larger carrier plus it has 8 7/16 inch
bolt hold ring gear on vs 8ea 3/8 inch ones on the D35 which are also
on a smaller radius relative to axle center line too on D35 the the
difference is very apparent. If the AMC 20 has had a one piece axle
upgrade I would easily place it above a stock D44 in strength.
-----------------
TheSnoMan.com
#46
Guest
Posts: n/a
Re: Re: detroit locker problem
On Sat, 28 Jul 2007 08:45:09 -0700, bonsai4tim@aol.com wrote:
>If parts are a close to the cost of a new detroit ($550 or so) then I
>will just replace the whole thing.
Your money would be better spent with a bigger axle too if you by a
new locker.
-----------------
TheSnoMan.com
>If parts are a close to the cost of a new detroit ($550 or so) then I
>will just replace the whole thing.
Your money would be better spent with a bigger axle too if you by a
new locker.
-----------------
TheSnoMan.com
#47
Guest
Posts: n/a
Re: Re: detroit locker problem
On Sat, 28 Jul 2007 08:45:09 -0700, bonsai4tim@aol.com wrote:
>If parts are a close to the cost of a new detroit ($550 or so) then I
>will just replace the whole thing.
Your money would be better spent with a bigger axle too if you by a
new locker.
-----------------
TheSnoMan.com
>If parts are a close to the cost of a new detroit ($550 or so) then I
>will just replace the whole thing.
Your money would be better spent with a bigger axle too if you by a
new locker.
-----------------
TheSnoMan.com
#48
Guest
Posts: n/a
Re: Re: detroit locker problem
On Sat, 28 Jul 2007 08:45:09 -0700, bonsai4tim@aol.com wrote:
>If parts are a close to the cost of a new detroit ($550 or so) then I
>will just replace the whole thing.
Your money would be better spent with a bigger axle too if you by a
new locker.
-----------------
TheSnoMan.com
>If parts are a close to the cost of a new detroit ($550 or so) then I
>will just replace the whole thing.
Your money would be better spent with a bigger axle too if you by a
new locker.
-----------------
TheSnoMan.com
#49
Guest
Posts: n/a
Re: Re: detroit locker problem
On Sat, 28 Jul 2007 08:45:09 -0700, bonsai4tim@aol.com wrote:
>If parts are a close to the cost of a new detroit ($550 or so) then I
>will just replace the whole thing.
Your money would be better spent with a bigger axle too if you by a
new locker.
-----------------
TheSnoMan.com
>If parts are a close to the cost of a new detroit ($550 or so) then I
>will just replace the whole thing.
Your money would be better spent with a bigger axle too if you by a
new locker.
-----------------
TheSnoMan.com
#50
Guest
Posts: n/a
Re: Re: detroit locker problem
"SnoMan" <admin@snoman.com> wrote in message
news:dqena359344h4f5apb7cr0h19ct37p2b26@4ax.com...
> On Sat, 28 Jul 2007 13:53:31 GMT, "Jeff Strickland"
> <crwlr@verizon.net> wrote:
>
>>I have a full Detroit in my AMC20, and an EZ Locker in the D30 on my front
>>axle. I've been driving my CJ with the front hubs locked constantly for
>>years, and I never have any problem from the front.
>
>
> The AMC20 is a much stronger axle than a D35 as it has a 1.3 inch
> bigger ring gear and a much larger carrier plus it has 8 7/16 inch
> bolt hold ring gear on vs 8ea 3/8 inch ones on the D35 which are also
> on a smaller radius relative to axle center line too on D35 the the
> difference is very apparent. If the AMC 20 has had a one piece axle
> upgrade I would easily place it above a stock D44 in strength.
Everybody else places it equal at best.
The Ring & Pinion gears on the OP's D35 are not broken, making this a moot
point. Actually, it makes all of your posts on the subject moot.
You should stick to stuff you know about.