Desert Steel Fiberglass Body
05-14-2005, 08:10 PM
#1
Guest
Posts: n/a
Desert Steel Fiberglass Body
I finally found the marking tags for the fiberglass body on my CJ7. There
are two Desert Steel tags that were painted over, one on the inside of each
front quarter panel. Part of their logo includes a cactus. I think they
are located on the Arizona/California border, based on an internet search.
I tried to find an email address or phone number on the internet to no
avail. For the regulars around here, you may remember a post of mine about
the radio not fitting in the dash due to the hood vent drain being in the
way.
BTW, the 360 block is at the cleaners, all of the engine parts are laying
around the garage neatly sorted and labeled, and I'm preparing the engine
compartment for a newly rebuilt engine. The suspension is finished, the
stainless brake lines are on, the frame is repaired and painted.
Chip
are two Desert Steel tags that were painted over, one on the inside of each
front quarter panel. Part of their logo includes a cactus. I think they
are located on the Arizona/California border, based on an internet search.
I tried to find an email address or phone number on the internet to no
avail. For the regulars around here, you may remember a post of mine about
the radio not fitting in the dash due to the hood vent drain being in the
way.
BTW, the 360 block is at the cleaners, all of the engine parts are laying
around the garage neatly sorted and labeled, and I'm preparing the engine
compartment for a newly rebuilt engine. The suspension is finished, the
stainless brake lines are on, the frame is repaired and painted.
Chip
05-14-2005, 08:33 PM
#2
Guest
Posts: n/a
Re: Desert Steel Fiberglass Body
So, lets see some pictures.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Chip wrote:
>
> I finally found the marking tags for the fiberglass body on my CJ7. There
> are two Desert Steel tags that were painted over, one on the inside of each
> front quarter panel. Part of their logo includes a cactus. I think they
> are located on the Arizona/California border, based on an internet search.
> I tried to find an email address or phone number on the internet to no
> avail. For the regulars around here, you may remember a post of mine about
> the radio not fitting in the dash due to the hood vent drain being in the
> way.
>
> BTW, the 360 block is at the cleaners, all of the engine parts are laying
> around the garage neatly sorted and labeled, and I'm preparing the engine
> compartment for a newly rebuilt engine. The suspension is finished, the
> stainless brake lines are on, the frame is repaired and painted.
>
> Chip
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Chip wrote:
>
> I finally found the marking tags for the fiberglass body on my CJ7. There
> are two Desert Steel tags that were painted over, one on the inside of each
> front quarter panel. Part of their logo includes a cactus. I think they
> are located on the Arizona/California border, based on an internet search.
> I tried to find an email address or phone number on the internet to no
> avail. For the regulars around here, you may remember a post of mine about
> the radio not fitting in the dash due to the hood vent drain being in the
> way.
>
> BTW, the 360 block is at the cleaners, all of the engine parts are laying
> around the garage neatly sorted and labeled, and I'm preparing the engine
> compartment for a newly rebuilt engine. The suspension is finished, the
> stainless brake lines are on, the frame is repaired and painted.
>
> Chip
05-14-2005, 08:33 PM
#3
Guest
Posts: n/a
Re: Desert Steel Fiberglass Body
So, lets see some pictures.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Chip wrote:
>
> I finally found the marking tags for the fiberglass body on my CJ7. There
> are two Desert Steel tags that were painted over, one on the inside of each
> front quarter panel. Part of their logo includes a cactus. I think they
> are located on the Arizona/California border, based on an internet search.
> I tried to find an email address or phone number on the internet to no
> avail. For the regulars around here, you may remember a post of mine about
> the radio not fitting in the dash due to the hood vent drain being in the
> way.
>
> BTW, the 360 block is at the cleaners, all of the engine parts are laying
> around the garage neatly sorted and labeled, and I'm preparing the engine
> compartment for a newly rebuilt engine. The suspension is finished, the
> stainless brake lines are on, the frame is repaired and painted.
>
> Chip
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Chip wrote:
>
> I finally found the marking tags for the fiberglass body on my CJ7. There
> are two Desert Steel tags that were painted over, one on the inside of each
> front quarter panel. Part of their logo includes a cactus. I think they
> are located on the Arizona/California border, based on an internet search.
> I tried to find an email address or phone number on the internet to no
> avail. For the regulars around here, you may remember a post of mine about
> the radio not fitting in the dash due to the hood vent drain being in the
> way.
>
> BTW, the 360 block is at the cleaners, all of the engine parts are laying
> around the garage neatly sorted and labeled, and I'm preparing the engine
> compartment for a newly rebuilt engine. The suspension is finished, the
> stainless brake lines are on, the frame is repaired and painted.
>
> Chip
05-14-2005, 08:33 PM
#4
Guest
Posts: n/a
Re: Desert Steel Fiberglass Body
So, lets see some pictures.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Chip wrote:
>
> I finally found the marking tags for the fiberglass body on my CJ7. There
> are two Desert Steel tags that were painted over, one on the inside of each
> front quarter panel. Part of their logo includes a cactus. I think they
> are located on the Arizona/California border, based on an internet search.
> I tried to find an email address or phone number on the internet to no
> avail. For the regulars around here, you may remember a post of mine about
> the radio not fitting in the dash due to the hood vent drain being in the
> way.
>
> BTW, the 360 block is at the cleaners, all of the engine parts are laying
> around the garage neatly sorted and labeled, and I'm preparing the engine
> compartment for a newly rebuilt engine. The suspension is finished, the
> stainless brake lines are on, the frame is repaired and painted.
>
> Chip
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Chip wrote:
>
> I finally found the marking tags for the fiberglass body on my CJ7. There
> are two Desert Steel tags that were painted over, one on the inside of each
> front quarter panel. Part of their logo includes a cactus. I think they
> are located on the Arizona/California border, based on an internet search.
> I tried to find an email address or phone number on the internet to no
> avail. For the regulars around here, you may remember a post of mine about
> the radio not fitting in the dash due to the hood vent drain being in the
> way.
>
> BTW, the 360 block is at the cleaners, all of the engine parts are laying
> around the garage neatly sorted and labeled, and I'm preparing the engine
> compartment for a newly rebuilt engine. The suspension is finished, the
> stainless brake lines are on, the frame is repaired and painted.
>
> Chip
05-14-2005, 08:33 PM
#5
Guest
Posts: n/a
Re: Desert Steel Fiberglass Body
So, lets see some pictures.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Chip wrote:
>
> I finally found the marking tags for the fiberglass body on my CJ7. There
> are two Desert Steel tags that were painted over, one on the inside of each
> front quarter panel. Part of their logo includes a cactus. I think they
> are located on the Arizona/California border, based on an internet search.
> I tried to find an email address or phone number on the internet to no
> avail. For the regulars around here, you may remember a post of mine about
> the radio not fitting in the dash due to the hood vent drain being in the
> way.
>
> BTW, the 360 block is at the cleaners, all of the engine parts are laying
> around the garage neatly sorted and labeled, and I'm preparing the engine
> compartment for a newly rebuilt engine. The suspension is finished, the
> stainless brake lines are on, the frame is repaired and painted.
>
> Chip
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Chip wrote:
>
> I finally found the marking tags for the fiberglass body on my CJ7. There
> are two Desert Steel tags that were painted over, one on the inside of each
> front quarter panel. Part of their logo includes a cactus. I think they
> are located on the Arizona/California border, based on an internet search.
> I tried to find an email address or phone number on the internet to no
> avail. For the regulars around here, you may remember a post of mine about
> the radio not fitting in the dash due to the hood vent drain being in the
> way.
>
> BTW, the 360 block is at the cleaners, all of the engine parts are laying
> around the garage neatly sorted and labeled, and I'm preparing the engine
> compartment for a newly rebuilt engine. The suspension is finished, the
> stainless brake lines are on, the frame is repaired and painted.
>
> Chip
05-15-2005, 10:15 PM
#6
Guest
Posts: n/a
Re: Desert Steel Fiberglass Body
Can I post pictures to this NG or do I need to put them elsewhere?
CJ
"L.W. ("ßill") ------ III" <----------@***.net> wrote in message
news:428698F3.7ECD5683@***.net...
> So, lets see some pictures.
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> Chip wrote:
>>
>> I finally found the marking tags for the fiberglass body on my CJ7.
>> There
>> are two Desert Steel tags that were painted over, one on the inside of
>> each
>> front quarter panel. Part of their logo includes a cactus. I think they
>> are located on the Arizona/California border, based on an internet
>> search.
>> I tried to find an email address or phone number on the internet to no
>> avail. For the regulars around here, you may remember a post of mine
>> about
>> the radio not fitting in the dash due to the hood vent drain being in the
>> way.
>>
>> BTW, the 360 block is at the cleaners, all of the engine parts are laying
>> around the garage neatly sorted and labeled, and I'm preparing the engine
>> compartment for a newly rebuilt engine. The suspension is finished, the
>> stainless brake lines are on, the frame is repaired and painted.
>>
>> Chip
CJ
"L.W. ("ßill") ------ III" <----------@***.net> wrote in message
news:428698F3.7ECD5683@***.net...
> So, lets see some pictures.
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> Chip wrote:
>>
>> I finally found the marking tags for the fiberglass body on my CJ7.
>> There
>> are two Desert Steel tags that were painted over, one on the inside of
>> each
>> front quarter panel. Part of their logo includes a cactus. I think they
>> are located on the Arizona/California border, based on an internet
>> search.
>> I tried to find an email address or phone number on the internet to no
>> avail. For the regulars around here, you may remember a post of mine
>> about
>> the radio not fitting in the dash due to the hood vent drain being in the
>> way.
>>
>> BTW, the 360 block is at the cleaners, all of the engine parts are laying
>> around the garage neatly sorted and labeled, and I'm preparing the engine
>> compartment for a newly rebuilt engine. The suspension is finished, the
>> stainless brake lines are on, the frame is repaired and painted.
>>
>> Chip
05-15-2005, 10:15 PM
#7
Guest
Posts: n/a
Re: Desert Steel Fiberglass Body
Can I post pictures to this NG or do I need to put them elsewhere?
CJ
"L.W. ("ßill") ------ III" <----------@***.net> wrote in message
news:428698F3.7ECD5683@***.net...
> So, lets see some pictures.
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> Chip wrote:
>>
>> I finally found the marking tags for the fiberglass body on my CJ7.
>> There
>> are two Desert Steel tags that were painted over, one on the inside of
>> each
>> front quarter panel. Part of their logo includes a cactus. I think they
>> are located on the Arizona/California border, based on an internet
>> search.
>> I tried to find an email address or phone number on the internet to no
>> avail. For the regulars around here, you may remember a post of mine
>> about
>> the radio not fitting in the dash due to the hood vent drain being in the
>> way.
>>
>> BTW, the 360 block is at the cleaners, all of the engine parts are laying
>> around the garage neatly sorted and labeled, and I'm preparing the engine
>> compartment for a newly rebuilt engine. The suspension is finished, the
>> stainless brake lines are on, the frame is repaired and painted.
>>
>> Chip
CJ
"L.W. ("ßill") ------ III" <----------@***.net> wrote in message
news:428698F3.7ECD5683@***.net...
> So, lets see some pictures.
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> Chip wrote:
>>
>> I finally found the marking tags for the fiberglass body on my CJ7.
>> There
>> are two Desert Steel tags that were painted over, one on the inside of
>> each
>> front quarter panel. Part of their logo includes a cactus. I think they
>> are located on the Arizona/California border, based on an internet
>> search.
>> I tried to find an email address or phone number on the internet to no
>> avail. For the regulars around here, you may remember a post of mine
>> about
>> the radio not fitting in the dash due to the hood vent drain being in the
>> way.
>>
>> BTW, the 360 block is at the cleaners, all of the engine parts are laying
>> around the garage neatly sorted and labeled, and I'm preparing the engine
>> compartment for a newly rebuilt engine. The suspension is finished, the
>> stainless brake lines are on, the frame is repaired and painted.
>>
>> Chip
05-15-2005, 10:15 PM
#8
Guest
Posts: n/a
Re: Desert Steel Fiberglass Body
Can I post pictures to this NG or do I need to put them elsewhere?
CJ
"L.W. ("ßill") ------ III" <----------@***.net> wrote in message
news:428698F3.7ECD5683@***.net...
> So, lets see some pictures.
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> Chip wrote:
>>
>> I finally found the marking tags for the fiberglass body on my CJ7.
>> There
>> are two Desert Steel tags that were painted over, one on the inside of
>> each
>> front quarter panel. Part of their logo includes a cactus. I think they
>> are located on the Arizona/California border, based on an internet
>> search.
>> I tried to find an email address or phone number on the internet to no
>> avail. For the regulars around here, you may remember a post of mine
>> about
>> the radio not fitting in the dash due to the hood vent drain being in the
>> way.
>>
>> BTW, the 360 block is at the cleaners, all of the engine parts are laying
>> around the garage neatly sorted and labeled, and I'm preparing the engine
>> compartment for a newly rebuilt engine. The suspension is finished, the
>> stainless brake lines are on, the frame is repaired and painted.
>>
>> Chip
CJ
"L.W. ("ßill") ------ III" <----------@***.net> wrote in message
news:428698F3.7ECD5683@***.net...
> So, lets see some pictures.
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> Chip wrote:
>>
>> I finally found the marking tags for the fiberglass body on my CJ7.
>> There
>> are two Desert Steel tags that were painted over, one on the inside of
>> each
>> front quarter panel. Part of their logo includes a cactus. I think they
>> are located on the Arizona/California border, based on an internet
>> search.
>> I tried to find an email address or phone number on the internet to no
>> avail. For the regulars around here, you may remember a post of mine
>> about
>> the radio not fitting in the dash due to the hood vent drain being in the
>> way.
>>
>> BTW, the 360 block is at the cleaners, all of the engine parts are laying
>> around the garage neatly sorted and labeled, and I'm preparing the engine
>> compartment for a newly rebuilt engine. The suspension is finished, the
>> stainless brake lines are on, the frame is repaired and painted.
>>
>> Chip
05-15-2005, 10:15 PM
#9
Guest
Posts: n/a
Re: Desert Steel Fiberglass Body
Can I post pictures to this NG or do I need to put them elsewhere?
CJ
"L.W. ("ßill") ------ III" <----------@***.net> wrote in message
news:428698F3.7ECD5683@***.net...
> So, lets see some pictures.
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> Chip wrote:
>>
>> I finally found the marking tags for the fiberglass body on my CJ7.
>> There
>> are two Desert Steel tags that were painted over, one on the inside of
>> each
>> front quarter panel. Part of their logo includes a cactus. I think they
>> are located on the Arizona/California border, based on an internet
>> search.
>> I tried to find an email address or phone number on the internet to no
>> avail. For the regulars around here, you may remember a post of mine
>> about
>> the radio not fitting in the dash due to the hood vent drain being in the
>> way.
>>
>> BTW, the 360 block is at the cleaners, all of the engine parts are laying
>> around the garage neatly sorted and labeled, and I'm preparing the engine
>> compartment for a newly rebuilt engine. The suspension is finished, the
>> stainless brake lines are on, the frame is repaired and painted.
>>
>> Chip
CJ
"L.W. ("ßill") ------ III" <----------@***.net> wrote in message
news:428698F3.7ECD5683@***.net...
> So, lets see some pictures.
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> Chip wrote:
>>
>> I finally found the marking tags for the fiberglass body on my CJ7.
>> There
>> are two Desert Steel tags that were painted over, one on the inside of
>> each
>> front quarter panel. Part of their logo includes a cactus. I think they
>> are located on the Arizona/California border, based on an internet
>> search.
>> I tried to find an email address or phone number on the internet to no
>> avail. For the regulars around here, you may remember a post of mine
>> about
>> the radio not fitting in the dash due to the hood vent drain being in the
>> way.
>>
>> BTW, the 360 block is at the cleaners, all of the engine parts are laying
>> around the garage neatly sorted and labeled, and I'm preparing the engine
>> compartment for a newly rebuilt engine. The suspension is finished, the
>> stainless brake lines are on, the frame is repaired and painted.
>>
>> Chip
05-15-2005, 10:19 PM
#10
Guest
Posts: n/a
Re: Desert Steel Fiberglass Body
Please just post a link to them, these groups are not set up (they don't
have the necessary bandwidth) for photos.
Jerry
Chip wrote:
> Can I post pictures to this NG or do I need to put them elsewhere?
>
> CJ
>
>
> "L.W. ("ßill") ------ III" <----------@***.net> wrote in message
> news:428698F3.7ECD5683@***.net...
>
>> So, lets see some pictures.
>> God Bless America, ßill O|||||||O
>>mailto:-------------------- http://www.----------.com/
>>
>>Chip wrote:
>>
>>>I finally found the marking tags for the fiberglass body on my CJ7.
>>>There
>>>are two Desert Steel tags that were painted over, one on the inside of
>>>each
>>>front quarter panel. Part of their logo includes a cactus. I think they
>>>are located on the Arizona/California border, based on an internet
>>>search.
>>>I tried to find an email address or phone number on the internet to no
>>>avail. For the regulars around here, you may remember a post of mine
>>>about
>>>the radio not fitting in the dash due to the hood vent drain being in the
>>>way.
>>>
>>>BTW, the 360 block is at the cleaners, all of the engine parts are laying
>>>around the garage neatly sorted and labeled, and I'm preparing the engine
>>>compartment for a newly rebuilt engine. The suspension is finished, the
>>>stainless brake lines are on, the frame is repaired and painted.
>>>
>>>Chip
>
>
>
--
Jerry Bransford
PP-ASEL N6TAY
See the Geezer Jeep at
http://members.***.net/jerrypb/
have the necessary bandwidth) for photos.
Jerry
Chip wrote:
> Can I post pictures to this NG or do I need to put them elsewhere?
>
> CJ
>
>
> "L.W. ("ßill") ------ III" <----------@***.net> wrote in message
> news:428698F3.7ECD5683@***.net...
>
>> So, lets see some pictures.
>> God Bless America, ßill O|||||||O
>>mailto:-------------------- http://www.----------.com/
>>
>>Chip wrote:
>>
>>>I finally found the marking tags for the fiberglass body on my CJ7.
>>>There
>>>are two Desert Steel tags that were painted over, one on the inside of
>>>each
>>>front quarter panel. Part of their logo includes a cactus. I think they
>>>are located on the Arizona/California border, based on an internet
>>>search.
>>>I tried to find an email address or phone number on the internet to no
>>>avail. For the regulars around here, you may remember a post of mine
>>>about
>>>the radio not fitting in the dash due to the hood vent drain being in the
>>>way.
>>>
>>>BTW, the 360 block is at the cleaners, all of the engine parts are laying
>>>around the garage neatly sorted and labeled, and I'm preparing the engine
>>>compartment for a newly rebuilt engine. The suspension is finished, the
>>>stainless brake lines are on, the frame is repaired and painted.
>>>
>>>Chip
>
>
>
--
Jerry Bransford
PP-ASEL N6TAY
See the Geezer Jeep at
http://members.***.net/jerrypb/
