Jerry Bransford

Please just post a link to them, these groups are not set up (they don't
have the necessary bandwidth) for photos.

Jerry

Chip wrote:
> Can I post pictures to this NG or do I need to put them elsewhere?
>
> CJ
>
>
> "L.W. ("ßill") ------ III" <----------@***.net> wrote in message
> news:428698F3.7ECD5683@***.net...
>
>> So, lets see some pictures.
>> God Bless America, ßill O|||||||O
>>mailto:-------------------- http://www.----------.com/
>>
>>Chip wrote:
>>
>>>I finally found the marking tags for the fiberglass body on my CJ7.
>>>There
>>>are two Desert Steel tags that were painted over, one on the inside of
>>>each
>>>front quarter panel. Part of their logo includes a cactus. I think they
>>>are located on the Arizona/California border, based on an internet
>>>search.
>>>I tried to find an email address or phone number on the internet to no
>>>avail. For the regulars around here, you may remember a post of mine
>>>about
>>>the radio not fitting in the dash due to the hood vent drain being in the
>>>way.
>>>
>>>BTW, the 360 block is at the cleaners, all of the engine parts are laying
>>>around the garage neatly sorted and labeled, and I'm preparing the engine
>>>compartment for a newly rebuilt engine. The suspension is finished, the
>>>stainless brake lines are on, the frame is repaired and painted.
>>>
>>>Chip
>
>
>

--
Jerry Bransford
PP-ASEL N6TAY
See the Geezer Jeep at
http://members.***.net/jerrypb/

Jerry Bransford

Please just post a link to them, these groups are not set up (they don't
have the necessary bandwidth) for photos.

Jerry

Chip wrote:
> Can I post pictures to this NG or do I need to put them elsewhere?
>
> CJ
>
>
> "L.W. ("ßill") ------ III" <----------@***.net> wrote in message
> news:428698F3.7ECD5683@***.net...
>
>> So, lets see some pictures.
>> God Bless America, ßill O|||||||O
>>mailto:-------------------- http://www.----------.com/
>>
>>Chip wrote:
>>
>>>I finally found the marking tags for the fiberglass body on my CJ7.
>>>There
>>>are two Desert Steel tags that were painted over, one on the inside of
>>>each
>>>front quarter panel. Part of their logo includes a cactus. I think they
>>>are located on the Arizona/California border, based on an internet
>>>search.
>>>I tried to find an email address or phone number on the internet to no
>>>avail. For the regulars around here, you may remember a post of mine
>>>about
>>>the radio not fitting in the dash due to the hood vent drain being in the
>>>way.
>>>
>>>BTW, the 360 block is at the cleaners, all of the engine parts are laying
>>>around the garage neatly sorted and labeled, and I'm preparing the engine
>>>compartment for a newly rebuilt engine. The suspension is finished, the
>>>stainless brake lines are on, the frame is repaired and painted.
>>>
>>>Chip
>
>
>

--
Jerry Bransford
PP-ASEL N6TAY
See the Geezer Jeep at
http://members.***.net/jerrypb/

Jerry Bransford

Please just post a link to them, these groups are not set up (they don't
have the necessary bandwidth) for photos.

Jerry

Chip wrote:
> Can I post pictures to this NG or do I need to put them elsewhere?
>
> CJ
>
>
> "L.W. ("ßill") ------ III" <----------@***.net> wrote in message
> news:428698F3.7ECD5683@***.net...
>
>> So, lets see some pictures.
>> God Bless America, ßill O|||||||O
>>mailto:-------------------- http://www.----------.com/
>>
>>Chip wrote:
>>
>>>I finally found the marking tags for the fiberglass body on my CJ7.
>>>There
>>>are two Desert Steel tags that were painted over, one on the inside of
>>>each
>>>front quarter panel. Part of their logo includes a cactus. I think they
>>>are located on the Arizona/California border, based on an internet
>>>search.
>>>I tried to find an email address or phone number on the internet to no
>>>avail. For the regulars around here, you may remember a post of mine
>>>about
>>>the radio not fitting in the dash due to the hood vent drain being in the
>>>way.
>>>
>>>BTW, the 360 block is at the cleaners, all of the engine parts are laying
>>>around the garage neatly sorted and labeled, and I'm preparing the engine
>>>compartment for a newly rebuilt engine. The suspension is finished, the
>>>stainless brake lines are on, the frame is repaired and painted.
>>>
>>>Chip
>
>
>

--
Jerry Bransford
PP-ASEL N6TAY
See the Geezer Jeep at
http://members.***.net/jerrypb/

L.W.(=?iso-8859-1?Q?=DFill?=) Hughes III

This is not a binary group, so no pictures. Your ISP has web
storage for you at: http://home.neo.rr.com/cjenkins1/ Or you may upload
them to the binary news group: alt.binaries.pictures.autos.4x4 and tell
us to look there.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/

Chip wrote:
>
> I finally found the marking tags for the fiberglass body on my CJ7. There
> are two Desert Steel tags that were painted over, one on the inside of each
> front quarter panel. Part of their logo includes a cactus. I think they
> are located on the Arizona/California border, based on an internet search.
> I tried to find an email address or phone number on the internet to no
> avail. For the regulars around here, you may remember a post of mine about
> the radio not fitting in the dash due to the hood vent drain being in the
> way.
>
> BTW, the 360 block is at the cleaners, all of the engine parts are laying
> around the garage neatly sorted and labeled, and I'm preparing the engine
> compartment for a newly rebuilt engine. The suspension is finished, the
> stainless brake lines are on, the frame is repaired and painted.
>
> Chip

L.W.(=?iso-8859-1?Q?=DFill?=) Hughes III

This is not a binary group, so no pictures. Your ISP has web
storage for you at: http://home.neo.rr.com/cjenkins1/ Or you may upload
them to the binary news group: alt.binaries.pictures.autos.4x4 and tell
us to look there.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/

Chip wrote:
>
> I finally found the marking tags for the fiberglass body on my CJ7. There
> are two Desert Steel tags that were painted over, one on the inside of each
> front quarter panel. Part of their logo includes a cactus. I think they
> are located on the Arizona/California border, based on an internet search.
> I tried to find an email address or phone number on the internet to no
> avail. For the regulars around here, you may remember a post of mine about
> the radio not fitting in the dash due to the hood vent drain being in the
> way.
>
> BTW, the 360 block is at the cleaners, all of the engine parts are laying
> around the garage neatly sorted and labeled, and I'm preparing the engine
> compartment for a newly rebuilt engine. The suspension is finished, the
> stainless brake lines are on, the frame is repaired and painted.
>
> Chip

L.W.(=?iso-8859-1?Q?=DFill?=) Hughes III

This is not a binary group, so no pictures. Your ISP has web
storage for you at: http://home.neo.rr.com/cjenkins1/ Or you may upload
them to the binary news group: alt.binaries.pictures.autos.4x4 and tell
us to look there.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/

Chip wrote:
>
> I finally found the marking tags for the fiberglass body on my CJ7. There
> are two Desert Steel tags that were painted over, one on the inside of each
> front quarter panel. Part of their logo includes a cactus. I think they
> are located on the Arizona/California border, based on an internet search.
> I tried to find an email address or phone number on the internet to no
> avail. For the regulars around here, you may remember a post of mine about
> the radio not fitting in the dash due to the hood vent drain being in the
> way.
>
> BTW, the 360 block is at the cleaners, all of the engine parts are laying
> around the garage neatly sorted and labeled, and I'm preparing the engine
> compartment for a newly rebuilt engine. The suspension is finished, the
> stainless brake lines are on, the frame is repaired and painted.
>
> Chip

L.W.(=?iso-8859-1?Q?=DFill?=) Hughes III

This is not a binary group, so no pictures. Your ISP has web
storage for you at: http://home.neo.rr.com/cjenkins1/ Or you may upload
them to the binary news group: alt.binaries.pictures.autos.4x4 and tell
us to look there.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/

Chip wrote:
>
> I finally found the marking tags for the fiberglass body on my CJ7. There
> are two Desert Steel tags that were painted over, one on the inside of each
> front quarter panel. Part of their logo includes a cactus. I think they
> are located on the Arizona/California border, based on an internet search.
> I tried to find an email address or phone number on the internet to no
> avail. For the regulars around here, you may remember a post of mine about
> the radio not fitting in the dash due to the hood vent drain being in the
> way.
>
> BTW, the 360 block is at the cleaners, all of the engine parts are laying
> around the garage neatly sorted and labeled, and I'm preparing the engine
> compartment for a newly rebuilt engine. The suspension is finished, the
> stainless brake lines are on, the frame is repaired and painted.
>
> Chip

Chip

I figured as much, I have some pictures posted to my webspace now. They can
be found at http://home.neo.rr.com/rocketitis/. Most of the pictures are
still on a different computer. I'll be sending those here soon. Just to
get you going, here is a list of the pics and a brief description.

1976cj7 - this is what it looked like before I removed the lift kit.

framerepair - The driver's side rear frame after the welding. Before the
repair, someone sandwiched another piece of metal to the outside of the
frame and just welded it on. It had buldged out due to internal rust. It
was in bad shape. All of the welded metal was removed and I ground the
existing (vertical) rusty metal away to a clean finish. I removed sections
(it was fairly thin anyway) so that I could weld the crossmember and shock
mount to the new piece. The corners were then ground to a smooth even
radius. This picture was after the repair but before the painting and
before the rear axle was reinstalled.

frontaxlebefore - What the axle looked like right after I pulled it out.

axle1 - the front axle after sandblasting and painting with POR-15

front done - After the front axle was reinstalled, painted and complete. I
see that the rusty header is still in that picture. It, however, is no
longer rusty. I blasted it and coated it with POR-20.

timingchain - The first time the front of the engine was removed. What a
mess. This shows the amount of play that was in the chain. (no wonder it
was so hard to time the engine. eh?) I replaced the timing set and put her
back together and drove it over the winter. Something still was amiss, so I
decided to remove the engine and rebuild it. That is where I'm at right
now.

I'll need to send a few more pictures of the process when I get them on this
computer. I will need to take a few more pictures of the work that has been
completed. I realize that this small sample does not really depict the
amount of time that I have in it.

Chip

Chip

I figured as much, I have some pictures posted to my webspace now. They can
be found at http://home.neo.rr.com/rocketitis/. Most of the pictures are
still on a different computer. I'll be sending those here soon. Just to
get you going, here is a list of the pics and a brief description.

1976cj7 - this is what it looked like before I removed the lift kit.

framerepair - The driver's side rear frame after the welding. Before the
repair, someone sandwiched another piece of metal to the outside of the
frame and just welded it on. It had buldged out due to internal rust. It
was in bad shape. All of the welded metal was removed and I ground the
existing (vertical) rusty metal away to a clean finish. I removed sections
(it was fairly thin anyway) so that I could weld the crossmember and shock
mount to the new piece. The corners were then ground to a smooth even
radius. This picture was after the repair but before the painting and
before the rear axle was reinstalled.

frontaxlebefore - What the axle looked like right after I pulled it out.

axle1 - the front axle after sandblasting and painting with POR-15

front done - After the front axle was reinstalled, painted and complete. I
see that the rusty header is still in that picture. It, however, is no
longer rusty. I blasted it and coated it with POR-20.

timingchain - The first time the front of the engine was removed. What a
mess. This shows the amount of play that was in the chain. (no wonder it
was so hard to time the engine. eh?) I replaced the timing set and put her
back together and drove it over the winter. Something still was amiss, so I
decided to remove the engine and rebuild it. That is where I'm at right
now.

I'll need to send a few more pictures of the process when I get them on this
computer. I will need to take a few more pictures of the work that has been
completed. I realize that this small sample does not really depict the
amount of time that I have in it.

Chip

Chip

I figured as much, I have some pictures posted to my webspace now. They can
be found at http://home.neo.rr.com/rocketitis/. Most of the pictures are
still on a different computer. I'll be sending those here soon. Just to
get you going, here is a list of the pics and a brief description.

1976cj7 - this is what it looked like before I removed the lift kit.

framerepair - The driver's side rear frame after the welding. Before the
repair, someone sandwiched another piece of metal to the outside of the
frame and just welded it on. It had buldged out due to internal rust. It
was in bad shape. All of the welded metal was removed and I ground the
existing (vertical) rusty metal away to a clean finish. I removed sections
(it was fairly thin anyway) so that I could weld the crossmember and shock
mount to the new piece. The corners were then ground to a smooth even
radius. This picture was after the repair but before the painting and
before the rear axle was reinstalled.

frontaxlebefore - What the axle looked like right after I pulled it out.

axle1 - the front axle after sandblasting and painting with POR-15

front done - After the front axle was reinstalled, painted and complete. I
see that the rusty header is still in that picture. It, however, is no
longer rusty. I blasted it and coated it with POR-20.

timingchain - The first time the front of the engine was removed. What a
mess. This shows the amount of play that was in the chain. (no wonder it
was so hard to time the engine. eh?) I replaced the timing set and put her
back together and drove it over the winter. Something still was amiss, so I
decided to remove the engine and rebuild it. That is where I'm at right
now.

I'll need to send a few more pictures of the process when I get them on this
computer. I will need to take a few more pictures of the work that has been
completed. I realize that this small sample does not really depict the
amount of time that I have in it.

Chip