Dash pad removal in '86 CJ
12-10-2003, 05:12 PM
#1
Guest
Posts: n/a
Dash pad removal in '86 CJ
Starting to have trouble with my windshield wipers. I hear that's is
something that's common. I know the motor is under the dash pad. Is it
held on by clips in addition to the 4 screws? Do I have to put the
windshield down to get it off (hard top's in the way now). It doesn't want
to budge and I didn't want to break anything. TIA!!
something that's common. I know the motor is under the dash pad. Is it
held on by clips in addition to the 4 screws? Do I have to put the
windshield down to get it off (hard top's in the way now). It doesn't want
to budge and I didn't want to break anything. TIA!!
12-10-2003, 05:19 PM
#2
Guest
Posts: n/a
Re: Dash pad removal in '86 CJ
yes, there are screws under the windshield frame. Must fold it down to get
at them.
"cspud" <cspud@hotmail.com> wrote in message
news:Xns944DA4F73DB05cspud@204.127.199.17...
> Starting to have trouble with my windshield wipers. I hear that's is
> something that's common. I know the motor is under the dash pad. Is it
> held on by clips in addition to the 4 screws? Do I have to put the
> windshield down to get it off (hard top's in the way now). It doesn't want
> to budge and I didn't want to break anything. TIA!!
at them.
"cspud" <cspud@hotmail.com> wrote in message
news:Xns944DA4F73DB05cspud@204.127.199.17...
> Starting to have trouble with my windshield wipers. I hear that's is
> something that's common. I know the motor is under the dash pad. Is it
> held on by clips in addition to the 4 screws? Do I have to put the
> windshield down to get it off (hard top's in the way now). It doesn't want
> to budge and I didn't want to break anything. TIA!!
12-10-2003, 05:19 PM
#3
Guest
Posts: n/a
Re: Dash pad removal in '86 CJ
yes, there are screws under the windshield frame. Must fold it down to get
at them.
"cspud" <cspud@hotmail.com> wrote in message
news:Xns944DA4F73DB05cspud@204.127.199.17...
> Starting to have trouble with my windshield wipers. I hear that's is
> something that's common. I know the motor is under the dash pad. Is it
> held on by clips in addition to the 4 screws? Do I have to put the
> windshield down to get it off (hard top's in the way now). It doesn't want
> to budge and I didn't want to break anything. TIA!!
at them.
"cspud" <cspud@hotmail.com> wrote in message
news:Xns944DA4F73DB05cspud@204.127.199.17...
> Starting to have trouble with my windshield wipers. I hear that's is
> something that's common. I know the motor is under the dash pad. Is it
> held on by clips in addition to the 4 screws? Do I have to put the
> windshield down to get it off (hard top's in the way now). It doesn't want
> to budge and I didn't want to break anything. TIA!!
12-10-2003, 05:19 PM
#4
Guest
Posts: n/a
Re: Dash pad removal in '86 CJ
yes, there are screws under the windshield frame. Must fold it down to get
at them.
"cspud" <cspud@hotmail.com> wrote in message
news:Xns944DA4F73DB05cspud@204.127.199.17...
> Starting to have trouble with my windshield wipers. I hear that's is
> something that's common. I know the motor is under the dash pad. Is it
> held on by clips in addition to the 4 screws? Do I have to put the
> windshield down to get it off (hard top's in the way now). It doesn't want
> to budge and I didn't want to break anything. TIA!!
at them.
"cspud" <cspud@hotmail.com> wrote in message
news:Xns944DA4F73DB05cspud@204.127.199.17...
> Starting to have trouble with my windshield wipers. I hear that's is
> something that's common. I know the motor is under the dash pad. Is it
> held on by clips in addition to the 4 screws? Do I have to put the
> windshield down to get it off (hard top's in the way now). It doesn't want
> to budge and I didn't want to break anything. TIA!!
12-10-2003, 07:23 PM
#5
Guest
Posts: n/a
Re: Dash pad removal in '86 CJ
Remove front 5 top screws (HT), remove front 6 of the back 8, leave just the
bolt part of the back 2 in the holes. lift front of top off the windshield and
slide a long 2x4 between the top and body just behind the front seats. This
will allow the windshield to go down without the top being off. remove the top
4 dash screws. etc,etc
bolt part of the back 2 in the holes. lift front of top off the windshield and
slide a long 2x4 between the top and body just behind the front seats. This
will allow the windshield to go down without the top being off. remove the top
4 dash screws. etc,etc
12-10-2003, 07:23 PM
#6
Guest
Posts: n/a
Re: Dash pad removal in '86 CJ
Remove front 5 top screws (HT), remove front 6 of the back 8, leave just the
bolt part of the back 2 in the holes. lift front of top off the windshield and
slide a long 2x4 between the top and body just behind the front seats. This
will allow the windshield to go down without the top being off. remove the top
4 dash screws. etc,etc
bolt part of the back 2 in the holes. lift front of top off the windshield and
slide a long 2x4 between the top and body just behind the front seats. This
will allow the windshield to go down without the top being off. remove the top
4 dash screws. etc,etc
12-10-2003, 07:23 PM
#7
Guest
Posts: n/a
Re: Dash pad removal in '86 CJ
Remove front 5 top screws (HT), remove front 6 of the back 8, leave just the
bolt part of the back 2 in the holes. lift front of top off the windshield and
slide a long 2x4 between the top and body just behind the front seats. This
will allow the windshield to go down without the top being off. remove the top
4 dash screws. etc,etc
bolt part of the back 2 in the holes. lift front of top off the windshield and
slide a long 2x4 between the top and body just behind the front seats. This
will allow the windshield to go down without the top being off. remove the top
4 dash screws. etc,etc
12-10-2003, 10:57 PM
#8
Guest
Posts: n/a
Re: Dash pad removal in '86 CJ
Are you sure it's the motor and not the wire? That's where mine was having
trouble.
Jim
--
'86 CJ-7
D30 D44 D300 4:1 T-5
SOA ARB 4.56 Mopar MPI
Fresno, CA USA
http://home.comcast.net/~cj.7/
"cspud" <cspud@hotmail.com> wrote in message
news:Xns944DA4F73DB05cspud@204.127.199.17...
> Starting to have trouble with my windshield wipers. I hear that's is
> something that's common. I know the motor is under the dash pad. Is it
> held on by clips in addition to the 4 screws? Do I have to put the
> windshield down to get it off (hard top's in the way now). It doesn't want
> to budge and I didn't want to break anything. TIA!!
trouble.
Jim
--
'86 CJ-7
D30 D44 D300 4:1 T-5
SOA ARB 4.56 Mopar MPI
Fresno, CA USA
http://home.comcast.net/~cj.7/
"cspud" <cspud@hotmail.com> wrote in message
news:Xns944DA4F73DB05cspud@204.127.199.17...
> Starting to have trouble with my windshield wipers. I hear that's is
> something that's common. I know the motor is under the dash pad. Is it
> held on by clips in addition to the 4 screws? Do I have to put the
> windshield down to get it off (hard top's in the way now). It doesn't want
> to budge and I didn't want to break anything. TIA!!
12-10-2003, 10:57 PM
#9
Guest
Posts: n/a
Re: Dash pad removal in '86 CJ
Are you sure it's the motor and not the wire? That's where mine was having
trouble.
Jim
--
'86 CJ-7
D30 D44 D300 4:1 T-5
SOA ARB 4.56 Mopar MPI
Fresno, CA USA
http://home.comcast.net/~cj.7/
"cspud" <cspud@hotmail.com> wrote in message
news:Xns944DA4F73DB05cspud@204.127.199.17...
> Starting to have trouble with my windshield wipers. I hear that's is
> something that's common. I know the motor is under the dash pad. Is it
> held on by clips in addition to the 4 screws? Do I have to put the
> windshield down to get it off (hard top's in the way now). It doesn't want
> to budge and I didn't want to break anything. TIA!!
trouble.
Jim
--
'86 CJ-7
D30 D44 D300 4:1 T-5
SOA ARB 4.56 Mopar MPI
Fresno, CA USA
http://home.comcast.net/~cj.7/
"cspud" <cspud@hotmail.com> wrote in message
news:Xns944DA4F73DB05cspud@204.127.199.17...
> Starting to have trouble with my windshield wipers. I hear that's is
> something that's common. I know the motor is under the dash pad. Is it
> held on by clips in addition to the 4 screws? Do I have to put the
> windshield down to get it off (hard top's in the way now). It doesn't want
> to budge and I didn't want to break anything. TIA!!
12-10-2003, 10:57 PM
#10
Guest
Posts: n/a
Re: Dash pad removal in '86 CJ
Are you sure it's the motor and not the wire? That's where mine was having
trouble.
Jim
--
'86 CJ-7
D30 D44 D300 4:1 T-5
SOA ARB 4.56 Mopar MPI
Fresno, CA USA
http://home.comcast.net/~cj.7/
"cspud" <cspud@hotmail.com> wrote in message
news:Xns944DA4F73DB05cspud@204.127.199.17...
> Starting to have trouble with my windshield wipers. I hear that's is
> something that's common. I know the motor is under the dash pad. Is it
> held on by clips in addition to the 4 screws? Do I have to put the
> windshield down to get it off (hard top's in the way now). It doesn't want
> to budge and I didn't want to break anything. TIA!!
trouble.
Jim
--
'86 CJ-7
D30 D44 D300 4:1 T-5
SOA ARB 4.56 Mopar MPI
Fresno, CA USA
http://home.comcast.net/~cj.7/
"cspud" <cspud@hotmail.com> wrote in message
news:Xns944DA4F73DB05cspud@204.127.199.17...
> Starting to have trouble with my windshield wipers. I hear that's is
> something that's common. I know the motor is under the dash pad. Is it
> held on by clips in addition to the 4 screws? Do I have to put the
> windshield down to get it off (hard top's in the way now). It doesn't want
> to budge and I didn't want to break anything. TIA!!
