Dana 30 pinion shaft play
07-27-2004, 12:34 AM
#11
Guest
Posts: n/a
Re: Dana 30 pinion shaft play
Hi Matt,
See if you can get away with just tightening it up. We're supposed
to replace the nut, if we have to take it off, for a seal or whatever,
it may have just backed off. If it tightens with less than what you feel
is the crash strength, of something up around 200, than that's what
happen.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Matt Macchiarolo wrote:
>
> Thought so. Damn. You'd think the seal would go too, but it's holding.
See if you can get away with just tightening it up. We're supposed
to replace the nut, if we have to take it off, for a seal or whatever,
it may have just backed off. If it tightens with less than what you feel
is the crash strength, of something up around 200, than that's what
happen.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Matt Macchiarolo wrote:
>
> Thought so. Damn. You'd think the seal would go too, but it's holding.
07-27-2004, 12:34 AM
#12
Guest
Posts: n/a
Re: Dana 30 pinion shaft play
Hi Matt,
See if you can get away with just tightening it up. We're supposed
to replace the nut, if we have to take it off, for a seal or whatever,
it may have just backed off. If it tightens with less than what you feel
is the crash strength, of something up around 200, than that's what
happen.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Matt Macchiarolo wrote:
>
> Thought so. Damn. You'd think the seal would go too, but it's holding.
See if you can get away with just tightening it up. We're supposed
to replace the nut, if we have to take it off, for a seal or whatever,
it may have just backed off. If it tightens with less than what you feel
is the crash strength, of something up around 200, than that's what
happen.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Matt Macchiarolo wrote:
>
> Thought so. Damn. You'd think the seal would go too, but it's holding.
07-27-2004, 12:34 AM
#13
Guest
Posts: n/a
Re: Dana 30 pinion shaft play
Hi Matt,
See if you can get away with just tightening it up. We're supposed
to replace the nut, if we have to take it off, for a seal or whatever,
it may have just backed off. If it tightens with less than what you feel
is the crash strength, of something up around 200, than that's what
happen.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Matt Macchiarolo wrote:
>
> Thought so. Damn. You'd think the seal would go too, but it's holding.
See if you can get away with just tightening it up. We're supposed
to replace the nut, if we have to take it off, for a seal or whatever,
it may have just backed off. If it tightens with less than what you feel
is the crash strength, of something up around 200, than that's what
happen.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Matt Macchiarolo wrote:
>
> Thought so. Damn. You'd think the seal would go too, but it's holding.
07-27-2004, 08:25 AM
#14
Guest
Posts: n/a
Re: Dana 30 pinion shaft play
Worth a try. A member of my off-road club suggested this as well. Did you
mean "crush strength," in reference to the collapsible spacer? It moves a
tiny bit in and out, but more up/down/side/side.
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:4105DB69.E0B67539@***.net...
> Hi Matt,
> See if you can get away with just tightening it up. We're supposed
> to replace the nut, if we have to take it off, for a seal or whatever,
> it may have just backed off. If it tightens with less than what you feel
> is the crash strength, of something up around 200, than that's what
> happen.
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> Matt Macchiarolo wrote:
> >
> > Thought so. Damn. You'd think the seal would go too, but it's holding.
mean "crush strength," in reference to the collapsible spacer? It moves a
tiny bit in and out, but more up/down/side/side.
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:4105DB69.E0B67539@***.net...
> Hi Matt,
> See if you can get away with just tightening it up. We're supposed
> to replace the nut, if we have to take it off, for a seal or whatever,
> it may have just backed off. If it tightens with less than what you feel
> is the crash strength, of something up around 200, than that's what
> happen.
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> Matt Macchiarolo wrote:
> >
> > Thought so. Damn. You'd think the seal would go too, but it's holding.
07-27-2004, 08:25 AM
#15
Guest
Posts: n/a
Re: Dana 30 pinion shaft play
Worth a try. A member of my off-road club suggested this as well. Did you
mean "crush strength," in reference to the collapsible spacer? It moves a
tiny bit in and out, but more up/down/side/side.
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:4105DB69.E0B67539@***.net...
> Hi Matt,
> See if you can get away with just tightening it up. We're supposed
> to replace the nut, if we have to take it off, for a seal or whatever,
> it may have just backed off. If it tightens with less than what you feel
> is the crash strength, of something up around 200, than that's what
> happen.
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> Matt Macchiarolo wrote:
> >
> > Thought so. Damn. You'd think the seal would go too, but it's holding.
mean "crush strength," in reference to the collapsible spacer? It moves a
tiny bit in and out, but more up/down/side/side.
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:4105DB69.E0B67539@***.net...
> Hi Matt,
> See if you can get away with just tightening it up. We're supposed
> to replace the nut, if we have to take it off, for a seal or whatever,
> it may have just backed off. If it tightens with less than what you feel
> is the crash strength, of something up around 200, than that's what
> happen.
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> Matt Macchiarolo wrote:
> >
> > Thought so. Damn. You'd think the seal would go too, but it's holding.
07-27-2004, 08:25 AM
#16
Guest
Posts: n/a
Re: Dana 30 pinion shaft play
Worth a try. A member of my off-road club suggested this as well. Did you
mean "crush strength," in reference to the collapsible spacer? It moves a
tiny bit in and out, but more up/down/side/side.
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:4105DB69.E0B67539@***.net...
> Hi Matt,
> See if you can get away with just tightening it up. We're supposed
> to replace the nut, if we have to take it off, for a seal or whatever,
> it may have just backed off. If it tightens with less than what you feel
> is the crash strength, of something up around 200, than that's what
> happen.
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> Matt Macchiarolo wrote:
> >
> > Thought so. Damn. You'd think the seal would go too, but it's holding.
mean "crush strength," in reference to the collapsible spacer? It moves a
tiny bit in and out, but more up/down/side/side.
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:4105DB69.E0B67539@***.net...
> Hi Matt,
> See if you can get away with just tightening it up. We're supposed
> to replace the nut, if we have to take it off, for a seal or whatever,
> it may have just backed off. If it tightens with less than what you feel
> is the crash strength, of something up around 200, than that's what
> happen.
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> Matt Macchiarolo wrote:
> >
> > Thought so. Damn. You'd think the seal would go too, but it's holding.
07-27-2004, 08:25 AM
#17
Guest
Posts: n/a
Re: Dana 30 pinion shaft play
Worth a try. A member of my off-road club suggested this as well. Did you
mean "crush strength," in reference to the collapsible spacer? It moves a
tiny bit in and out, but more up/down/side/side.
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:4105DB69.E0B67539@***.net...
> Hi Matt,
> See if you can get away with just tightening it up. We're supposed
> to replace the nut, if we have to take it off, for a seal or whatever,
> it may have just backed off. If it tightens with less than what you feel
> is the crash strength, of something up around 200, than that's what
> happen.
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> Matt Macchiarolo wrote:
> >
> > Thought so. Damn. You'd think the seal would go too, but it's holding.
mean "crush strength," in reference to the collapsible spacer? It moves a
tiny bit in and out, but more up/down/side/side.
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:4105DB69.E0B67539@***.net...
> Hi Matt,
> See if you can get away with just tightening it up. We're supposed
> to replace the nut, if we have to take it off, for a seal or whatever,
> it may have just backed off. If it tightens with less than what you feel
> is the crash strength, of something up around 200, than that's what
> happen.
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> Matt Macchiarolo wrote:
> >
> > Thought so. Damn. You'd think the seal would go too, but it's holding.
07-27-2004, 12:39 PM
#18
Guest
Posts: n/a
Re: Dana 30 pinion shaft play
Yup, like tapered bearings do, not a problem with front wheel
bearings, but tragic to ring and pinions.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Matt Macchiarolo wrote:
>
> Worth a try. A member of my off-road club suggested this as well. Did you
> mean "crush strength," in reference to the collapsible spacer? It moves a
> tiny bit in and out, but more up/down/side/side.
bearings, but tragic to ring and pinions.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Matt Macchiarolo wrote:
>
> Worth a try. A member of my off-road club suggested this as well. Did you
> mean "crush strength," in reference to the collapsible spacer? It moves a
> tiny bit in and out, but more up/down/side/side.
07-27-2004, 12:39 PM
#19
Guest
Posts: n/a
Re: Dana 30 pinion shaft play
Yup, like tapered bearings do, not a problem with front wheel
bearings, but tragic to ring and pinions.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Matt Macchiarolo wrote:
>
> Worth a try. A member of my off-road club suggested this as well. Did you
> mean "crush strength," in reference to the collapsible spacer? It moves a
> tiny bit in and out, but more up/down/side/side.
bearings, but tragic to ring and pinions.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Matt Macchiarolo wrote:
>
> Worth a try. A member of my off-road club suggested this as well. Did you
> mean "crush strength," in reference to the collapsible spacer? It moves a
> tiny bit in and out, but more up/down/side/side.
07-27-2004, 12:39 PM
#20
Guest
Posts: n/a
Re: Dana 30 pinion shaft play
Yup, like tapered bearings do, not a problem with front wheel
bearings, but tragic to ring and pinions.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Matt Macchiarolo wrote:
>
> Worth a try. A member of my off-road club suggested this as well. Did you
> mean "crush strength," in reference to the collapsible spacer? It moves a
> tiny bit in and out, but more up/down/side/side.
bearings, but tragic to ring and pinions.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Matt Macchiarolo wrote:
>
> Worth a try. A member of my off-road club suggested this as well. Did you
> mean "crush strength," in reference to the collapsible spacer? It moves a
> tiny bit in and out, but more up/down/side/side.
