Re: Dana 30
I did not have to do that... same hook-up on the vacuum disconnect as the 91
axle. "RoyJ" < wrote in message... > Part numbers won't match, the '95 has a slightly different vacmumn motor > setup. Requires moving the wire from the switch on the firewall down to > the switch on the axle. No big deal, just one of those irritating things. > > ufatbastehd wrote: >> On Feb 20, 3:30 pm, The Merg wrote: >> >>>'95 is a YJ, so hypothetically it uses the same ujoints and calipers. I >>>don't think they changed those between 91-95. >>>I'm just guessing, though. >>>Go to a parts website, look up the respective parts for the 91 and the >>>95 and see if the part #s match. >>> >>>ufatbastehd wrote: >>> >>>>I may get a Dana 30 out of a 95YJ for my 91 YJ. >>>>Can I use the calipers from my 91 on the 95 axle? >>> >>>>Also does the 95 have the larger TJ style axle ujoints? >> >> >> >> >> DOH! why did'nt I think of that? >> |
Re: Dana 30
I did not have to do that... same hook-up on the vacuum disconnect as the 91
axle. "RoyJ" < wrote in message... > Part numbers won't match, the '95 has a slightly different vacmumn motor > setup. Requires moving the wire from the switch on the firewall down to > the switch on the axle. No big deal, just one of those irritating things. > > ufatbastehd wrote: >> On Feb 20, 3:30 pm, The Merg wrote: >> >>>'95 is a YJ, so hypothetically it uses the same ujoints and calipers. I >>>don't think they changed those between 91-95. >>>I'm just guessing, though. >>>Go to a parts website, look up the respective parts for the 91 and the >>>95 and see if the part #s match. >>> >>>ufatbastehd wrote: >>> >>>>I may get a Dana 30 out of a 95YJ for my 91 YJ. >>>>Can I use the calipers from my 91 on the 95 axle? >>> >>>>Also does the 95 have the larger TJ style axle ujoints? >> >> >> >> >> DOH! why did'nt I think of that? >> |
Re: Dana 30
Hook up is the same, but you don't have the '4wd' light on the dash.
JimG wrote: > I did not have to do that... same hook-up on the vacuum disconnect as the 91 > axle. > > "RoyJ" < wrote in message... > >>Part numbers won't match, the '95 has a slightly different vacmumn motor >>setup. Requires moving the wire from the switch on the firewall down to >>the switch on the axle. No big deal, just one of those irritating things. >> >>ufatbastehd wrote: >> >>>On Feb 20, 3:30 pm, The Merg wrote: >>> >>> >>>>'95 is a YJ, so hypothetically it uses the same ujoints and calipers. I >>>>don't think they changed those between 91-95. >>>>I'm just guessing, though. >>>>Go to a parts website, look up the respective parts for the 91 and the >>>>95 and see if the part #s match. >>>> >>>>ufatbastehd wrote: >>>> >>>> >>>>>I may get a Dana 30 out of a 95YJ for my 91 YJ. >>>>>Can I use the calipers from my 91 on the 95 axle? >>>> >>>>>Also does the 95 have the larger TJ style axle ujoints? >>> >>> >>> >>> >>>DOH! why did'nt I think of that? >>> > > > |
Re: Dana 30
Hook up is the same, but you don't have the '4wd' light on the dash.
JimG wrote: > I did not have to do that... same hook-up on the vacuum disconnect as the 91 > axle. > > "RoyJ" < wrote in message... > >>Part numbers won't match, the '95 has a slightly different vacmumn motor >>setup. Requires moving the wire from the switch on the firewall down to >>the switch on the axle. No big deal, just one of those irritating things. >> >>ufatbastehd wrote: >> >>>On Feb 20, 3:30 pm, The Merg wrote: >>> >>> >>>>'95 is a YJ, so hypothetically it uses the same ujoints and calipers. I >>>>don't think they changed those between 91-95. >>>>I'm just guessing, though. >>>>Go to a parts website, look up the respective parts for the 91 and the >>>>95 and see if the part #s match. >>>> >>>>ufatbastehd wrote: >>>> >>>> >>>>>I may get a Dana 30 out of a 95YJ for my 91 YJ. >>>>>Can I use the calipers from my 91 on the 95 axle? >>>> >>>>>Also does the 95 have the larger TJ style axle ujoints? >>> >>> >>> >>> >>>DOH! why did'nt I think of that? >>> > > > |
Re: Dana 30
Hook up is the same, but you don't have the '4wd' light on the dash.
JimG wrote: > I did not have to do that... same hook-up on the vacuum disconnect as the 91 > axle. > > "RoyJ" < wrote in message... > >>Part numbers won't match, the '95 has a slightly different vacmumn motor >>setup. Requires moving the wire from the switch on the firewall down to >>the switch on the axle. No big deal, just one of those irritating things. >> >>ufatbastehd wrote: >> >>>On Feb 20, 3:30 pm, The Merg wrote: >>> >>> >>>>'95 is a YJ, so hypothetically it uses the same ujoints and calipers. I >>>>don't think they changed those between 91-95. >>>>I'm just guessing, though. >>>>Go to a parts website, look up the respective parts for the 91 and the >>>>95 and see if the part #s match. >>>> >>>>ufatbastehd wrote: >>>> >>>> >>>>>I may get a Dana 30 out of a 95YJ for my 91 YJ. >>>>>Can I use the calipers from my 91 on the 95 axle? >>>> >>>>>Also does the 95 have the larger TJ style axle ujoints? >>> >>> >>> >>> >>>DOH! why did'nt I think of that? >>> > > > |
Re: Dana 30
Sure do... works fine.
"RoyJ" wrote in message... > Hook up is the same, but you don't have the '4wd' light on the dash. > > JimG wrote: >> I did not have to do that... same hook-up on the vacuum disconnect as the >> 91 axle. >> >> "RoyJ" < wrote in message... >> >>>Part numbers won't match, the '95 has a slightly different vacmumn motor >>>setup. Requires moving the wire from the switch on the firewall down to >>>the switch on the axle. No big deal, just one of those irritating things. >>> >>>ufatbastehd wrote: >>> >>>>On Feb 20, 3:30 pm, The Merg wrote: >>>> >>>> >>>>>'95 is a YJ, so hypothetically it uses the same ujoints and calipers. >>>>>I >>>>>don't think they changed those between 91-95. >>>>>I'm just guessing, though. >>>>>Go to a parts website, look up the respective parts for the 91 and the >>>>>95 and see if the part #s match. >>>>> >>>>>ufatbastehd wrote: >>>>> >>>>> >>>>>>I may get a Dana 30 out of a 95YJ for my 91 YJ. >>>>>>Can I use the calipers from my 91 on the 95 axle? >>>>> >>>>>>Also does the 95 have the larger TJ style axle ujoints? >>>> >>>> >>>> >>>> >>>>DOH! why did'nt I think of that? >>>> >> >> |
Re: Dana 30
Sure do... works fine.
"RoyJ" wrote in message... > Hook up is the same, but you don't have the '4wd' light on the dash. > > JimG wrote: >> I did not have to do that... same hook-up on the vacuum disconnect as the >> 91 axle. >> >> "RoyJ" < wrote in message... >> >>>Part numbers won't match, the '95 has a slightly different vacmumn motor >>>setup. Requires moving the wire from the switch on the firewall down to >>>the switch on the axle. No big deal, just one of those irritating things. >>> >>>ufatbastehd wrote: >>> >>>>On Feb 20, 3:30 pm, The Merg wrote: >>>> >>>> >>>>>'95 is a YJ, so hypothetically it uses the same ujoints and calipers. >>>>>I >>>>>don't think they changed those between 91-95. >>>>>I'm just guessing, though. >>>>>Go to a parts website, look up the respective parts for the 91 and the >>>>>95 and see if the part #s match. >>>>> >>>>>ufatbastehd wrote: >>>>> >>>>> >>>>>>I may get a Dana 30 out of a 95YJ for my 91 YJ. >>>>>>Can I use the calipers from my 91 on the 95 axle? >>>>> >>>>>>Also does the 95 have the larger TJ style axle ujoints? >>>> >>>> >>>> >>>> >>>>DOH! why did'nt I think of that? >>>> >> >> |
Re: Dana 30
Sure do... works fine.
"RoyJ" wrote in message... > Hook up is the same, but you don't have the '4wd' light on the dash. > > JimG wrote: >> I did not have to do that... same hook-up on the vacuum disconnect as the >> 91 axle. >> >> "RoyJ" < wrote in message... >> >>>Part numbers won't match, the '95 has a slightly different vacmumn motor >>>setup. Requires moving the wire from the switch on the firewall down to >>>the switch on the axle. No big deal, just one of those irritating things. >>> >>>ufatbastehd wrote: >>> >>>>On Feb 20, 3:30 pm, The Merg wrote: >>>> >>>> >>>>>'95 is a YJ, so hypothetically it uses the same ujoints and calipers. >>>>>I >>>>>don't think they changed those between 91-95. >>>>>I'm just guessing, though. >>>>>Go to a parts website, look up the respective parts for the 91 and the >>>>>95 and see if the part #s match. >>>>> >>>>>ufatbastehd wrote: >>>>> >>>>> >>>>>>I may get a Dana 30 out of a 95YJ for my 91 YJ. >>>>>>Can I use the calipers from my 91 on the 95 axle? >>>>> >>>>>>Also does the 95 have the larger TJ style axle ujoints? >>>> >>>> >>>> >>>> >>>>DOH! why did'nt I think of that? >>>> >> >> |
Re: Dana 30
The STOCK '91 and the STOCK '95 have different vacumn hookups and
wiring. Whatever. JimG wrote: > Sure do... works fine. > > "RoyJ" wrote in message... > >>Hook up is the same, but you don't have the '4wd' light on the dash. >> >>JimG wrote: >> >>>I did not have to do that... same hook-up on the vacuum disconnect as the >>>91 axle. >>> >>>"RoyJ" < wrote in message... >>> >>> >>>>Part numbers won't match, the '95 has a slightly different vacmumn motor >>>>setup. Requires moving the wire from the switch on the firewall down to >>>>the switch on the axle. No big deal, just one of those irritating things. >>>> >>>>ufatbastehd wrote: >>>> >>>> >>>>>On Feb 20, 3:30 pm, The Merg wrote: >>>>> >>>>> >>>>> >>>>>>'95 is a YJ, so hypothetically it uses the same ujoints and calipers. >>>>>>I >>>>>>don't think they changed those between 91-95. >>>>>>I'm just guessing, though. >>>>>>Go to a parts website, look up the respective parts for the 91 and the >>>>>>95 and see if the part #s match. >>>>>> >>>>>>ufatbastehd wrote: >>>>>> >>>>>> >>>>>> >>>>>>>I may get a Dana 30 out of a 95YJ for my 91 YJ. >>>>>>>Can I use the calipers from my 91 on the 95 axle? >>>>>> >>>>>>>Also does the 95 have the larger TJ style axle ujoints? >>>>> >>>>> >>>>> >>>>> >>>>>DOH! why did'nt I think of that? >>>>> >>> >>> > |
Re: Dana 30
The STOCK '91 and the STOCK '95 have different vacumn hookups and
wiring. Whatever. JimG wrote: > Sure do... works fine. > > "RoyJ" wrote in message... > >>Hook up is the same, but you don't have the '4wd' light on the dash. >> >>JimG wrote: >> >>>I did not have to do that... same hook-up on the vacuum disconnect as the >>>91 axle. >>> >>>"RoyJ" < wrote in message... >>> >>> >>>>Part numbers won't match, the '95 has a slightly different vacmumn motor >>>>setup. Requires moving the wire from the switch on the firewall down to >>>>the switch on the axle. No big deal, just one of those irritating things. >>>> >>>>ufatbastehd wrote: >>>> >>>> >>>>>On Feb 20, 3:30 pm, The Merg wrote: >>>>> >>>>> >>>>> >>>>>>'95 is a YJ, so hypothetically it uses the same ujoints and calipers. >>>>>>I >>>>>>don't think they changed those between 91-95. >>>>>>I'm just guessing, though. >>>>>>Go to a parts website, look up the respective parts for the 91 and the >>>>>>95 and see if the part #s match. >>>>>> >>>>>>ufatbastehd wrote: >>>>>> >>>>>> >>>>>> >>>>>>>I may get a Dana 30 out of a 95YJ for my 91 YJ. >>>>>>>Can I use the calipers from my 91 on the 95 axle? >>>>>> >>>>>>>Also does the 95 have the larger TJ style axle ujoints? >>>>> >>>>> >>>>> >>>>> >>>>>DOH! why did'nt I think of that? >>>>> >>> >>> > |
All times are GMT -4. The time now is 02:56 PM. |
© 2024 MH Sub I, LLC dba Internet Brands