Jeeps Canada - Jeep Forums

Jeeps Canada - Jeep Forums (https://www.jeepscanada.com/)

- Jeep Mailing List (https://www.jeepscanada.com/jeep-mailing-list-32/)

- - Dana 30 (https://www.jeepscanada.com/jeep-mailing-list-32/dana-30-a-44341/)

ufatbastehd

02-20-2007 03:26 PM

Dana 30

I may get a Dana 30 out of a 95YJ for my 91 YJ.
Can I use the calipers from my 91 on the 95 axle?

Also does the 95 have the larger TJ style axle ujoints?

The Merg

02-20-2007 03:30 PM

Re: Dana 30

'95 is a YJ, so hypothetically it uses the same ujoints and calipers. I
don't think they changed those between 91-95.
I'm just guessing, though.
Go to a parts website, look up the respective parts for the 91 and the
95 and see if the part #s match.

ufatbastehd wrote:
> I may get a Dana 30 out of a 95YJ for my 91 YJ.
> Can I use the calipers from my 91 on the 95 axle?
>
>
> Also does the 95 have the larger TJ style axle ujoints?
>

The Merg

02-20-2007 03:30 PM

Re: Dana 30

The Merg

02-20-2007 03:30 PM

Re: Dana 30

JimG	02-20-2007 03:32 PM

Re: Dana 30

Not sure about the u-joints but the calipers will work. I just did this
same swap on my sons 91 YJ... put in a 95 axle set for the 4.11 gears.

--
JimG
80' CJ-7 258 CID, HEI
4.56 Gears, Lock-Right F&R
35" BFG MT on 15x10 Centerlines
D44 Rear, D30 Front. SOA
Dana 300 w/4:1 & Currie twin sticks
Warn X8000i w/ dual batteries

00' TJ Sport 4.0L, 5sp
4.56 Gears, TrueTrac rear
33" BFG AT on 15x8 Eagle Alloys
D35 Rear, D30 Front. 3" Suspension Lift
Warn X8000i

"ufatbastehd" wrote in message...
>I may get a Dana 30 out of a 95YJ for my 91 YJ.
> Can I use the calipers from my 91 on the 95 axle?
>
>
> Also does the 95 have the larger TJ style axle ujoints?
>

JimG	02-20-2007 03:32 PM

Re: Dana 30

JimG	02-20-2007 03:32 PM

Re: Dana 30

ufatbastehd

02-20-2007 03:48 PM

Re: Dana 30

On Feb 20, 3:30 pm, The Merg <greg.merg...@REMOVEgmail.com> wrote:
> '95 is a YJ, so hypothetically it uses the same ujoints and calipers. I
> don't think they changed those between 91-95.
> I'm just guessing, though.
> Go to a parts website, look up the respective parts for the 91 and the
> 95 and see if the part #s match.
>
> ufatbastehd wrote:
> > I may get a Dana 30 out of a 95YJ for my 91 YJ.
> > Can I use the calipers from my 91 on the 95 axle?
>
> > Also does the 95 have the larger TJ style axle ujoints?

DOH! why did'nt I think of that?

ufatbastehd

02-20-2007 03:48 PM

Re: Dana 30

ufatbastehd

02-20-2007 03:48 PM

Re: Dana 30

Greg	02-20-2007 03:48 PM

Re: Dana 30

95 they went to 297 Ujoints, 260 prior to that.

"JimG" <JimG@nospam.com> wrote in message
news:eVICh.3235$B25.3163@news01.roc.ny...
> Not sure about the u-joints but the calipers will work. I just did this
> same swap on my sons 91 YJ... put in a 95 axle set for the 4.11 gears.
>
> --
> JimG
> 80' CJ-7 258 CID, HEI
> 4.56 Gears, Lock-Right F&R
> 35" BFG MT on 15x10 Centerlines
> D44 Rear, D30 Front. SOA
> Dana 300 w/4:1 & Currie twin sticks
> Warn X8000i w/ dual batteries
>
> 00' TJ Sport 4.0L, 5sp
> 4.56 Gears, TrueTrac rear
> 33" BFG AT on 15x8 Eagle Alloys
> D35 Rear, D30 Front. 3" Suspension Lift
> Warn X8000i
>
>
> "ufatbastehd" wrote in message...
>>I may get a Dana 30 out of a 95YJ for my 91 YJ.
>> Can I use the calipers from my 91 on the 95 axle?
>>
>>
>> Also does the 95 have the larger TJ style axle ujoints?
>>
>
>

Greg	02-20-2007 03:48 PM

Re: Dana 30

Greg	02-20-2007 03:48 PM

Re: Dana 30

ufatbastehd

02-20-2007 03:48 PM

Re: Dana 30

On Feb 20, 3:32 pm, "JimG" <J...@nospam.com> wrote:
> Not sure about the u-joints but the calipers will work. I just did this
> same swap on my sons 91 YJ... put in a 95 axle set for the 4.11 gears.
>
> --
> JimG
> 80' CJ-7 258 CID, HEI
> 4.56 Gears, Lock-Right F&R
> 35" BFG MT on 15x10 Centerlines
> D44 Rear, D30 Front. SOA
> Dana 300 w/4:1 & Currie twin sticks
> Warn X8000i w/ dual batteries
>
> 00' TJ Sport 4.0L, 5sp
> 4.56 Gears, TrueTrac rear
> 33" BFG AT on 15x8 Eagle Alloys
> D35 Rear, D30 Front. 3" Suspension Lift
> Warn X8000i
>
> "ufatbastehd" wrote in message...
> >I may get a Dana 30 out of a 95YJ for my 91 YJ.
> > Can I use the calipers from my 91 on the 95 axle?
>
> > Also does the 95 have the larger TJ style axle ujoints?

Thanks

ufatbastehd

02-20-2007 03:48 PM

Re: Dana 30

ufatbastehd

02-20-2007 03:48 PM

Re: Dana 30

RoyJ	02-20-2007 08:11 PM

Re: Dana 30

Part numbers won't match, the '95 has a slightly different vacmumn motor
setup. Requires moving the wire from the switch on the firewall down to
the switch on the axle. No big deal, just one of those irritating things.

ufatbastehd wrote:
> On Feb 20, 3:30 pm, The Merg <greg.merg...@REMOVEgmail.com> wrote:
>
>>'95 is a YJ, so hypothetically it uses the same ujoints and calipers. I
>>don't think they changed those between 91-95.
>>I'm just guessing, though.
>>Go to a parts website, look up the respective parts for the 91 and the
>>95 and see if the part #s match.
>>
>>ufatbastehd wrote:
>>
>>>I may get a Dana 30 out of a 95YJ for my 91 YJ.
>>>Can I use the calipers from my 91 on the 95 axle?
>>
>>>Also does the 95 have the larger TJ style axle ujoints?
>
>
>
>
> DOH! why did'nt I think of that?
>

RoyJ	02-20-2007 08:11 PM

Re: Dana 30

RoyJ	02-20-2007 08:11 PM

Re: Dana 30

JimG	02-20-2007 09:40 PM

Re: Dana 30

I did not have to do that... same hook-up on the vacuum disconnect as the 91
axle.

"RoyJ" < wrote in message...
> Part numbers won't match, the '95 has a slightly different vacmumn motor
> setup. Requires moving the wire from the switch on the firewall down to
> the switch on the axle. No big deal, just one of those irritating things.
>
> ufatbastehd wrote:
>> On Feb 20, 3:30 pm, The Merg wrote:
>>
>>>'95 is a YJ, so hypothetically it uses the same ujoints and calipers. I
>>>don't think they changed those between 91-95.
>>>I'm just guessing, though.
>>>Go to a parts website, look up the respective parts for the 91 and the
>>>95 and see if the part #s match.
>>>
>>>ufatbastehd wrote:
>>>
>>>>I may get a Dana 30 out of a 95YJ for my 91 YJ.
>>>>Can I use the calipers from my 91 on the 95 axle?
>>>
>>>>Also does the 95 have the larger TJ style axle ujoints?
>>
>>
>>
>>
>> DOH! why did'nt I think of that?
>>

JimG	02-20-2007 09:40 PM

Re: Dana 30

JimG	02-20-2007 09:40 PM

Re: Dana 30

RoyJ	02-20-2007 11:18 PM

Re: Dana 30

Hook up is the same, but you don't have the '4wd' light on the dash.

JimG wrote:
> I did not have to do that... same hook-up on the vacuum disconnect as the 91
> axle.
>
> "RoyJ" < wrote in message...
>
>>Part numbers won't match, the '95 has a slightly different vacmumn motor
>>setup. Requires moving the wire from the switch on the firewall down to
>>the switch on the axle. No big deal, just one of those irritating things.
>>
>>ufatbastehd wrote:
>>
>>>On Feb 20, 3:30 pm, The Merg wrote:
>>>
>>>
>>>>'95 is a YJ, so hypothetically it uses the same ujoints and calipers. I
>>>>don't think they changed those between 91-95.
>>>>I'm just guessing, though.
>>>>Go to a parts website, look up the respective parts for the 91 and the
>>>>95 and see if the part #s match.
>>>>
>>>>ufatbastehd wrote:
>>>>
>>>>
>>>>>I may get a Dana 30 out of a 95YJ for my 91 YJ.
>>>>>Can I use the calipers from my 91 on the 95 axle?
>>>>
>>>>>Also does the 95 have the larger TJ style axle ujoints?
>>>
>>>
>>>
>>>
>>>DOH! why did'nt I think of that?
>>>
>
>
>

RoyJ	02-20-2007 11:18 PM

Re: Dana 30

RoyJ	02-20-2007 11:18 PM

Re: Dana 30

JimG	02-21-2007 08:19 AM

Re: Dana 30

Sure do... works fine.

"RoyJ" wrote in message...
> Hook up is the same, but you don't have the '4wd' light on the dash.
>
> JimG wrote:
>> I did not have to do that... same hook-up on the vacuum disconnect as the
>> 91 axle.
>>
>> "RoyJ" < wrote in message...
>>
>>>Part numbers won't match, the '95 has a slightly different vacmumn motor
>>>setup. Requires moving the wire from the switch on the firewall down to
>>>the switch on the axle. No big deal, just one of those irritating things.
>>>
>>>ufatbastehd wrote:
>>>
>>>>On Feb 20, 3:30 pm, The Merg wrote:
>>>>
>>>>
>>>>>'95 is a YJ, so hypothetically it uses the same ujoints and calipers.
>>>>>I
>>>>>don't think they changed those between 91-95.
>>>>>I'm just guessing, though.
>>>>>Go to a parts website, look up the respective parts for the 91 and the
>>>>>95 and see if the part #s match.
>>>>>
>>>>>ufatbastehd wrote:
>>>>>
>>>>>
>>>>>>I may get a Dana 30 out of a 95YJ for my 91 YJ.
>>>>>>Can I use the calipers from my 91 on the 95 axle?
>>>>>
>>>>>>Also does the 95 have the larger TJ style axle ujoints?
>>>>
>>>>
>>>>
>>>>
>>>>DOH! why did'nt I think of that?
>>>>
>>
>>

JimG	02-21-2007 08:19 AM

Re: Dana 30

JimG	02-21-2007 08:19 AM

Re: Dana 30

RoyJ	02-21-2007 09:21 AM

Re: Dana 30

The STOCK '91 and the STOCK '95 have different vacumn hookups and
wiring. Whatever.

JimG wrote:
> Sure do... works fine.
>
> "RoyJ" wrote in message...
>
>>Hook up is the same, but you don't have the '4wd' light on the dash.
>>
>>JimG wrote:
>>
>>>I did not have to do that... same hook-up on the vacuum disconnect as the
>>>91 axle.
>>>
>>>"RoyJ" < wrote in message...
>>>
>>>
>>>>Part numbers won't match, the '95 has a slightly different vacmumn motor
>>>>setup. Requires moving the wire from the switch on the firewall down to
>>>>the switch on the axle. No big deal, just one of those irritating things.
>>>>
>>>>ufatbastehd wrote:
>>>>
>>>>
>>>>>On Feb 20, 3:30 pm, The Merg wrote:
>>>>>
>>>>>
>>>>>
>>>>>>'95 is a YJ, so hypothetically it uses the same ujoints and calipers.
>>>>>>I
>>>>>>don't think they changed those between 91-95.
>>>>>>I'm just guessing, though.
>>>>>>Go to a parts website, look up the respective parts for the 91 and the
>>>>>>95 and see if the part #s match.
>>>>>>
>>>>>>ufatbastehd wrote:
>>>>>>
>>>>>>
>>>>>>
>>>>>>>I may get a Dana 30 out of a 95YJ for my 91 YJ.
>>>>>>>Can I use the calipers from my 91 on the 95 axle?
>>>>>>
>>>>>>>Also does the 95 have the larger TJ style axle ujoints?
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>DOH! why did'nt I think of that?
>>>>>
>>>
>>>
>

RoyJ	02-21-2007 09:21 AM

Re: Dana 30

RoyJ	02-21-2007 09:21 AM

Re: Dana 30

ufatbastehd

02-23-2007 09:52 AM

Re: Dana 30

On Feb 20, 9:40 pm, "JimG" <J...@nospam.com> wrote:
> I did not have to do that... same hook-up on the vacuum disconnect as the 91
> axle.
>
> "RoyJ" < wrote in message...
> > Part numbers won't match, the '95 has a slightly different vacmumn motor
> > setup. Requires moving the wire from the switch on the firewall down to
> > the switch on the axle. No big deal, just one of those irritating things.
>
> > ufatbastehd wrote:
> >> On Feb 20, 3:30 pm, The Merg wrote:
>
> >>>'95 is a YJ, so hypothetically it uses the same ujoints and calipers. I
> >>>don't think they changed those between 91-95.
> >>>I'm just guessing, though.
> >>>Go to a parts website, look up the respective parts for the 91 and the
> >>>95 and see if the part #s match.
>
> >>>ufatbastehd wrote:
>
> >>>>I may get a Dana 30 out of a 95YJ for my 91 YJ.
> >>>>Can I use the calipers from my 91 on the 95 axle?
>
> >>>>Also does the 95 have the larger TJ style axle ujoints?
>
> >> DOH! why did'nt I think of that?

I'm using my existing disco so it should just bolt right up with no
wiring BS

ufatbastehd

02-23-2007 09:52 AM

Re: Dana 30

ufatbastehd

02-23-2007 09:52 AM

Re: Dana 30

All times are GMT -4. The time now is 03:19 PM.

Page generated in 0.06633 seconds with 5 queries