Dana 25 front axle, lubricate
05-23-2004, 04:23 PM
#11
Guest
Posts: n/a
Re: Dana 25 front axle, lubricate
Hi Henrik,
Fifteen degrees from vertical may be the breather, that maybe the
hose fell off. Maybe you can tell me what's it's near in this exploded
view: http://----------.com/dana30/axleparts.pdf
God Bless America, ßill O|||||||O
mailto:--------------------
Henrik wrote:
>
> "L.W. (ßill) ------ III" <----------@***.net> wrote in message
> news:40AFAD51.33CCC780@***.net...
> > Put your glasses on. As the chart says:
> >
> http://www.apple.queensu.ca/CJ3B/Pho...ationChart.gif
> > the steering knuckles have been converted from ninety weight oil to
> > grease that you will put in the fill plug to protect the axle universal
> > joints.
> > God Bless America, ßill O|||||||O
> > mailto:-------------------- http://www.----------.com/
> >
>
> Ok, I found the fill plug, thank you for the excellent link, that lead me to
> even more information about lubricants used in the steering knuckles.
>
> Now that I was looking at the front axle I found another possible fill plug?
> It is a bolt, looks like about 6mm, fitted in the axle about 15cm from the
> steering knuckles, in an angle of maybe 15 degrees.
> Any idea what these bolts do?
>
> Henrik
> M38A1, Rover V8
Fifteen degrees from vertical may be the breather, that maybe the
hose fell off. Maybe you can tell me what's it's near in this exploded
view: http://----------.com/dana30/axleparts.pdf
God Bless America, ßill O|||||||O
mailto:--------------------
Henrik wrote:
>
> "L.W. (ßill) ------ III" <----------@***.net> wrote in message
> news:40AFAD51.33CCC780@***.net...
> > Put your glasses on. As the chart says:
> >
> http://www.apple.queensu.ca/CJ3B/Pho...ationChart.gif
> > the steering knuckles have been converted from ninety weight oil to
> > grease that you will put in the fill plug to protect the axle universal
> > joints.
> > God Bless America, ßill O|||||||O
> > mailto:-------------------- http://www.----------.com/
> >
>
> Ok, I found the fill plug, thank you for the excellent link, that lead me to
> even more information about lubricants used in the steering knuckles.
>
> Now that I was looking at the front axle I found another possible fill plug?
> It is a bolt, looks like about 6mm, fitted in the axle about 15cm from the
> steering knuckles, in an angle of maybe 15 degrees.
> Any idea what these bolts do?
>
> Henrik
> M38A1, Rover V8
05-23-2004, 04:23 PM
#12
Guest
Posts: n/a
Re: Dana 25 front axle, lubricate
Hi Henrik,
Fifteen degrees from vertical may be the breather, that maybe the
hose fell off. Maybe you can tell me what's it's near in this exploded
view: http://----------.com/dana30/axleparts.pdf
God Bless America, ßill O|||||||O
mailto:--------------------
Henrik wrote:
>
> "L.W. (ßill) ------ III" <----------@***.net> wrote in message
> news:40AFAD51.33CCC780@***.net...
> > Put your glasses on. As the chart says:
> >
> http://www.apple.queensu.ca/CJ3B/Pho...ationChart.gif
> > the steering knuckles have been converted from ninety weight oil to
> > grease that you will put in the fill plug to protect the axle universal
> > joints.
> > God Bless America, ßill O|||||||O
> > mailto:-------------------- http://www.----------.com/
> >
>
> Ok, I found the fill plug, thank you for the excellent link, that lead me to
> even more information about lubricants used in the steering knuckles.
>
> Now that I was looking at the front axle I found another possible fill plug?
> It is a bolt, looks like about 6mm, fitted in the axle about 15cm from the
> steering knuckles, in an angle of maybe 15 degrees.
> Any idea what these bolts do?
>
> Henrik
> M38A1, Rover V8
Fifteen degrees from vertical may be the breather, that maybe the
hose fell off. Maybe you can tell me what's it's near in this exploded
view: http://----------.com/dana30/axleparts.pdf
God Bless America, ßill O|||||||O
mailto:--------------------
Henrik wrote:
>
> "L.W. (ßill) ------ III" <----------@***.net> wrote in message
> news:40AFAD51.33CCC780@***.net...
> > Put your glasses on. As the chart says:
> >
> http://www.apple.queensu.ca/CJ3B/Pho...ationChart.gif
> > the steering knuckles have been converted from ninety weight oil to
> > grease that you will put in the fill plug to protect the axle universal
> > joints.
> > God Bless America, ßill O|||||||O
> > mailto:-------------------- http://www.----------.com/
> >
>
> Ok, I found the fill plug, thank you for the excellent link, that lead me to
> even more information about lubricants used in the steering knuckles.
>
> Now that I was looking at the front axle I found another possible fill plug?
> It is a bolt, looks like about 6mm, fitted in the axle about 15cm from the
> steering knuckles, in an angle of maybe 15 degrees.
> Any idea what these bolts do?
>
> Henrik
> M38A1, Rover V8
05-23-2004, 04:23 PM
#13
Guest
Posts: n/a
Re: Dana 25 front axle, lubricate
Hi Henrik,
Fifteen degrees from vertical may be the breather, that maybe the
hose fell off. Maybe you can tell me what's it's near in this exploded
view: http://----------.com/dana30/axleparts.pdf
God Bless America, ßill O|||||||O
mailto:--------------------
Henrik wrote:
>
> "L.W. (ßill) ------ III" <----------@***.net> wrote in message
> news:40AFAD51.33CCC780@***.net...
> > Put your glasses on. As the chart says:
> >
> http://www.apple.queensu.ca/CJ3B/Pho...ationChart.gif
> > the steering knuckles have been converted from ninety weight oil to
> > grease that you will put in the fill plug to protect the axle universal
> > joints.
> > God Bless America, ßill O|||||||O
> > mailto:-------------------- http://www.----------.com/
> >
>
> Ok, I found the fill plug, thank you for the excellent link, that lead me to
> even more information about lubricants used in the steering knuckles.
>
> Now that I was looking at the front axle I found another possible fill plug?
> It is a bolt, looks like about 6mm, fitted in the axle about 15cm from the
> steering knuckles, in an angle of maybe 15 degrees.
> Any idea what these bolts do?
>
> Henrik
> M38A1, Rover V8
Fifteen degrees from vertical may be the breather, that maybe the
hose fell off. Maybe you can tell me what's it's near in this exploded
view: http://----------.com/dana30/axleparts.pdf
God Bless America, ßill O|||||||O
mailto:--------------------
Henrik wrote:
>
> "L.W. (ßill) ------ III" <----------@***.net> wrote in message
> news:40AFAD51.33CCC780@***.net...
> > Put your glasses on. As the chart says:
> >
> http://www.apple.queensu.ca/CJ3B/Pho...ationChart.gif
> > the steering knuckles have been converted from ninety weight oil to
> > grease that you will put in the fill plug to protect the axle universal
> > joints.
> > God Bless America, ßill O|||||||O
> > mailto:-------------------- http://www.----------.com/
> >
>
> Ok, I found the fill plug, thank you for the excellent link, that lead me to
> even more information about lubricants used in the steering knuckles.
>
> Now that I was looking at the front axle I found another possible fill plug?
> It is a bolt, looks like about 6mm, fitted in the axle about 15cm from the
> steering knuckles, in an angle of maybe 15 degrees.
> Any idea what these bolts do?
>
> Henrik
> M38A1, Rover V8
05-25-2004, 02:45 PM
#14
Guest
Posts: n/a
Re: Dana 25 front axle, lubricate
Hi Bill
Hard to explain precesily where the bolts are located but tomorrow I will
try to take a decent picture, maybe that wil solve the mystery.
Henrik
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:40B10857.284CEE1F@***.net...
> Hi Henrik,
> Fifteen degrees from vertical may be the breather, that maybe the
> hose fell off. Maybe you can tell me what's it's near in this exploded
> view: http://----------.com/dana30/axleparts.pdf
> God Bless America, ßill O|||||||O
> mailto:--------------------
>
> Henrik wrote:
> >
> > "L.W. (ßill) ------ III" <----------@***.net> wrote in message
> > news:40AFAD51.33CCC780@***.net...
> > > Put your glasses on. As the chart says:
> > >
> >
http://www.apple.queensu.ca/CJ3B/Pho...ationChart.gif
> > > the steering knuckles have been converted from ninety weight oil to
> > > grease that you will put in the fill plug to protect the axle
universal
> > > joints.
> > > God Bless America, ßill O|||||||O
> > > mailto:-------------------- http://www.----------.com/
> > >
> >
> > Ok, I found the fill plug, thank you for the excellent link, that lead
me to
> > even more information about lubricants used in the steering knuckles.
> >
> > Now that I was looking at the front axle I found another possible fill
plug?
> > It is a bolt, looks like about 6mm, fitted in the axle about 15cm from
the
> > steering knuckles, in an angle of maybe 15 degrees.
> > Any idea what these bolts do?
> >
> > Henrik
> > M38A1, Rover V8
Hard to explain precesily where the bolts are located but tomorrow I will
try to take a decent picture, maybe that wil solve the mystery.
Henrik
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:40B10857.284CEE1F@***.net...
> Hi Henrik,
> Fifteen degrees from vertical may be the breather, that maybe the
> hose fell off. Maybe you can tell me what's it's near in this exploded
> view: http://----------.com/dana30/axleparts.pdf
> God Bless America, ßill O|||||||O
> mailto:--------------------
>
> Henrik wrote:
> >
> > "L.W. (ßill) ------ III" <----------@***.net> wrote in message
> > news:40AFAD51.33CCC780@***.net...
> > > Put your glasses on. As the chart says:
> > >
> >
http://www.apple.queensu.ca/CJ3B/Pho...ationChart.gif
> > > the steering knuckles have been converted from ninety weight oil to
> > > grease that you will put in the fill plug to protect the axle
universal
> > > joints.
> > > God Bless America, ßill O|||||||O
> > > mailto:-------------------- http://www.----------.com/
> > >
> >
> > Ok, I found the fill plug, thank you for the excellent link, that lead
me to
> > even more information about lubricants used in the steering knuckles.
> >
> > Now that I was looking at the front axle I found another possible fill
plug?
> > It is a bolt, looks like about 6mm, fitted in the axle about 15cm from
the
> > steering knuckles, in an angle of maybe 15 degrees.
> > Any idea what these bolts do?
> >
> > Henrik
> > M38A1, Rover V8
05-25-2004, 02:45 PM
#15
Guest
Posts: n/a
Re: Dana 25 front axle, lubricate
Hi Bill
Hard to explain precesily where the bolts are located but tomorrow I will
try to take a decent picture, maybe that wil solve the mystery.
Henrik
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:40B10857.284CEE1F@***.net...
> Hi Henrik,
> Fifteen degrees from vertical may be the breather, that maybe the
> hose fell off. Maybe you can tell me what's it's near in this exploded
> view: http://----------.com/dana30/axleparts.pdf
> God Bless America, ßill O|||||||O
> mailto:--------------------
>
> Henrik wrote:
> >
> > "L.W. (ßill) ------ III" <----------@***.net> wrote in message
> > news:40AFAD51.33CCC780@***.net...
> > > Put your glasses on. As the chart says:
> > >
> >
http://www.apple.queensu.ca/CJ3B/Pho...ationChart.gif
> > > the steering knuckles have been converted from ninety weight oil to
> > > grease that you will put in the fill plug to protect the axle
universal
> > > joints.
> > > God Bless America, ßill O|||||||O
> > > mailto:-------------------- http://www.----------.com/
> > >
> >
> > Ok, I found the fill plug, thank you for the excellent link, that lead
me to
> > even more information about lubricants used in the steering knuckles.
> >
> > Now that I was looking at the front axle I found another possible fill
plug?
> > It is a bolt, looks like about 6mm, fitted in the axle about 15cm from
the
> > steering knuckles, in an angle of maybe 15 degrees.
> > Any idea what these bolts do?
> >
> > Henrik
> > M38A1, Rover V8
Hard to explain precesily where the bolts are located but tomorrow I will
try to take a decent picture, maybe that wil solve the mystery.
Henrik
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:40B10857.284CEE1F@***.net...
> Hi Henrik,
> Fifteen degrees from vertical may be the breather, that maybe the
> hose fell off. Maybe you can tell me what's it's near in this exploded
> view: http://----------.com/dana30/axleparts.pdf
> God Bless America, ßill O|||||||O
> mailto:--------------------
>
> Henrik wrote:
> >
> > "L.W. (ßill) ------ III" <----------@***.net> wrote in message
> > news:40AFAD51.33CCC780@***.net...
> > > Put your glasses on. As the chart says:
> > >
> >
http://www.apple.queensu.ca/CJ3B/Pho...ationChart.gif
> > > the steering knuckles have been converted from ninety weight oil to
> > > grease that you will put in the fill plug to protect the axle
universal
> > > joints.
> > > God Bless America, ßill O|||||||O
> > > mailto:-------------------- http://www.----------.com/
> > >
> >
> > Ok, I found the fill plug, thank you for the excellent link, that lead
me to
> > even more information about lubricants used in the steering knuckles.
> >
> > Now that I was looking at the front axle I found another possible fill
plug?
> > It is a bolt, looks like about 6mm, fitted in the axle about 15cm from
the
> > steering knuckles, in an angle of maybe 15 degrees.
> > Any idea what these bolts do?
> >
> > Henrik
> > M38A1, Rover V8
05-25-2004, 02:45 PM
#16
Guest
Posts: n/a
Re: Dana 25 front axle, lubricate
Hi Bill
Hard to explain precesily where the bolts are located but tomorrow I will
try to take a decent picture, maybe that wil solve the mystery.
Henrik
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:40B10857.284CEE1F@***.net...
> Hi Henrik,
> Fifteen degrees from vertical may be the breather, that maybe the
> hose fell off. Maybe you can tell me what's it's near in this exploded
> view: http://----------.com/dana30/axleparts.pdf
> God Bless America, ßill O|||||||O
> mailto:--------------------
>
> Henrik wrote:
> >
> > "L.W. (ßill) ------ III" <----------@***.net> wrote in message
> > news:40AFAD51.33CCC780@***.net...
> > > Put your glasses on. As the chart says:
> > >
> >
http://www.apple.queensu.ca/CJ3B/Pho...ationChart.gif
> > > the steering knuckles have been converted from ninety weight oil to
> > > grease that you will put in the fill plug to protect the axle
universal
> > > joints.
> > > God Bless America, ßill O|||||||O
> > > mailto:-------------------- http://www.----------.com/
> > >
> >
> > Ok, I found the fill plug, thank you for the excellent link, that lead
me to
> > even more information about lubricants used in the steering knuckles.
> >
> > Now that I was looking at the front axle I found another possible fill
plug?
> > It is a bolt, looks like about 6mm, fitted in the axle about 15cm from
the
> > steering knuckles, in an angle of maybe 15 degrees.
> > Any idea what these bolts do?
> >
> > Henrik
> > M38A1, Rover V8
Hard to explain precesily where the bolts are located but tomorrow I will
try to take a decent picture, maybe that wil solve the mystery.
Henrik
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:40B10857.284CEE1F@***.net...
> Hi Henrik,
> Fifteen degrees from vertical may be the breather, that maybe the
> hose fell off. Maybe you can tell me what's it's near in this exploded
> view: http://----------.com/dana30/axleparts.pdf
> God Bless America, ßill O|||||||O
> mailto:--------------------
>
> Henrik wrote:
> >
> > "L.W. (ßill) ------ III" <----------@***.net> wrote in message
> > news:40AFAD51.33CCC780@***.net...
> > > Put your glasses on. As the chart says:
> > >
> >
http://www.apple.queensu.ca/CJ3B/Pho...ationChart.gif
> > > the steering knuckles have been converted from ninety weight oil to
> > > grease that you will put in the fill plug to protect the axle
universal
> > > joints.
> > > God Bless America, ßill O|||||||O
> > > mailto:-------------------- http://www.----------.com/
> > >
> >
> > Ok, I found the fill plug, thank you for the excellent link, that lead
me to
> > even more information about lubricants used in the steering knuckles.
> >
> > Now that I was looking at the front axle I found another possible fill
plug?
> > It is a bolt, looks like about 6mm, fitted in the axle about 15cm from
the
> > steering knuckles, in an angle of maybe 15 degrees.
> > Any idea what these bolts do?
> >
> > Henrik
> > M38A1, Rover V8
05-25-2004, 02:45 PM
#17
Guest
Posts: n/a
Re: Dana 25 front axle, lubricate
Hi Bill
Hard to explain precesily where the bolts are located but tomorrow I will
try to take a decent picture, maybe that wil solve the mystery.
Henrik
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:40B10857.284CEE1F@***.net...
> Hi Henrik,
> Fifteen degrees from vertical may be the breather, that maybe the
> hose fell off. Maybe you can tell me what's it's near in this exploded
> view: http://----------.com/dana30/axleparts.pdf
> God Bless America, ßill O|||||||O
> mailto:--------------------
>
> Henrik wrote:
> >
> > "L.W. (ßill) ------ III" <----------@***.net> wrote in message
> > news:40AFAD51.33CCC780@***.net...
> > > Put your glasses on. As the chart says:
> > >
> >
http://www.apple.queensu.ca/CJ3B/Pho...ationChart.gif
> > > the steering knuckles have been converted from ninety weight oil to
> > > grease that you will put in the fill plug to protect the axle
universal
> > > joints.
> > > God Bless America, ßill O|||||||O
> > > mailto:-------------------- http://www.----------.com/
> > >
> >
> > Ok, I found the fill plug, thank you for the excellent link, that lead
me to
> > even more information about lubricants used in the steering knuckles.
> >
> > Now that I was looking at the front axle I found another possible fill
plug?
> > It is a bolt, looks like about 6mm, fitted in the axle about 15cm from
the
> > steering knuckles, in an angle of maybe 15 degrees.
> > Any idea what these bolts do?
> >
> > Henrik
> > M38A1, Rover V8
Hard to explain precesily where the bolts are located but tomorrow I will
try to take a decent picture, maybe that wil solve the mystery.
Henrik
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:40B10857.284CEE1F@***.net...
> Hi Henrik,
> Fifteen degrees from vertical may be the breather, that maybe the
> hose fell off. Maybe you can tell me what's it's near in this exploded
> view: http://----------.com/dana30/axleparts.pdf
> God Bless America, ßill O|||||||O
> mailto:--------------------
>
> Henrik wrote:
> >
> > "L.W. (ßill) ------ III" <----------@***.net> wrote in message
> > news:40AFAD51.33CCC780@***.net...
> > > Put your glasses on. As the chart says:
> > >
> >
http://www.apple.queensu.ca/CJ3B/Pho...ationChart.gif
> > > the steering knuckles have been converted from ninety weight oil to
> > > grease that you will put in the fill plug to protect the axle
universal
> > > joints.
> > > God Bless America, ßill O|||||||O
> > > mailto:-------------------- http://www.----------.com/
> > >
> >
> > Ok, I found the fill plug, thank you for the excellent link, that lead
me to
> > even more information about lubricants used in the steering knuckles.
> >
> > Now that I was looking at the front axle I found another possible fill
plug?
> > It is a bolt, looks like about 6mm, fitted in the axle about 15cm from
the
> > steering knuckles, in an angle of maybe 15 degrees.
> > Any idea what these bolts do?
> >
> > Henrik
> > M38A1, Rover V8
05-27-2004, 05:42 PM
#18
Guest
Posts: n/a
Re: Dana 25 front axle, lubricate
Now I finaly managed to get the photo taken.
The green arrow indicates the grease fill plug if I have understood you
right and the red circle indicates the bolt that I don't know what to do
with.
http://www.gsx.dk/jeep/axle_1.jpg
http://www.gsx.dk/jeep/axle_2.jpg
Thanks for all your help
Henrik
"Henrik" <hbl@12move.dk> wrote in message
news:c9048d$1aku$1@news.cybercity.dk...
> Hi Bill
>
> Hard to explain precesily where the bolts are located but tomorrow I will
> try to take a decent picture, maybe that wil solve the mystery.
>
> Henrik
>
The green arrow indicates the grease fill plug if I have understood you
right and the red circle indicates the bolt that I don't know what to do
with.
http://www.gsx.dk/jeep/axle_1.jpg
http://www.gsx.dk/jeep/axle_2.jpg
Thanks for all your help
Henrik
"Henrik" <hbl@12move.dk> wrote in message
news:c9048d$1aku$1@news.cybercity.dk...
> Hi Bill
>
> Hard to explain precesily where the bolts are located but tomorrow I will
> try to take a decent picture, maybe that wil solve the mystery.
>
> Henrik
>
05-27-2004, 05:42 PM
#19
Guest
Posts: n/a
Re: Dana 25 front axle, lubricate
Now I finaly managed to get the photo taken.
The green arrow indicates the grease fill plug if I have understood you
right and the red circle indicates the bolt that I don't know what to do
with.
http://www.gsx.dk/jeep/axle_1.jpg
http://www.gsx.dk/jeep/axle_2.jpg
Thanks for all your help
Henrik
"Henrik" <hbl@12move.dk> wrote in message
news:c9048d$1aku$1@news.cybercity.dk...
> Hi Bill
>
> Hard to explain precesily where the bolts are located but tomorrow I will
> try to take a decent picture, maybe that wil solve the mystery.
>
> Henrik
>
The green arrow indicates the grease fill plug if I have understood you
right and the red circle indicates the bolt that I don't know what to do
with.
http://www.gsx.dk/jeep/axle_1.jpg
http://www.gsx.dk/jeep/axle_2.jpg
Thanks for all your help
Henrik
"Henrik" <hbl@12move.dk> wrote in message
news:c9048d$1aku$1@news.cybercity.dk...
> Hi Bill
>
> Hard to explain precesily where the bolts are located but tomorrow I will
> try to take a decent picture, maybe that wil solve the mystery.
>
> Henrik
>
05-27-2004, 05:42 PM
#20
Guest
Posts: n/a
Re: Dana 25 front axle, lubricate
Now I finaly managed to get the photo taken.
The green arrow indicates the grease fill plug if I have understood you
right and the red circle indicates the bolt that I don't know what to do
with.
http://www.gsx.dk/jeep/axle_1.jpg
http://www.gsx.dk/jeep/axle_2.jpg
Thanks for all your help
Henrik
"Henrik" <hbl@12move.dk> wrote in message
news:c9048d$1aku$1@news.cybercity.dk...
> Hi Bill
>
> Hard to explain precesily where the bolts are located but tomorrow I will
> try to take a decent picture, maybe that wil solve the mystery.
>
> Henrik
>
The green arrow indicates the grease fill plug if I have understood you
right and the red circle indicates the bolt that I don't know what to do
with.
http://www.gsx.dk/jeep/axle_1.jpg
http://www.gsx.dk/jeep/axle_2.jpg
Thanks for all your help
Henrik
"Henrik" <hbl@12move.dk> wrote in message
news:c9048d$1aku$1@news.cybercity.dk...
> Hi Bill
>
> Hard to explain precesily where the bolts are located but tomorrow I will
> try to take a decent picture, maybe that wil solve the mystery.
>
> Henrik
>
