D60 in an XJ
03-31-2005, 06:36 PM
#1
Guest
Posts: n/a
D60 in an XJ
A friend of mine has a 1980 Dodge Ramcharger with a bad transmission. It has
a D60 rear, and a D44 front. Limited-slip in the rear, manual hubs up front.
Is it reasonable to have these shortened to be installed on my 89 Cherokee
after my next lift? (probably 6+" in the works).
Thanks,
Carl
a D60 rear, and a D44 front. Limited-slip in the rear, manual hubs up front.
Is it reasonable to have these shortened to be installed on my 89 Cherokee
after my next lift? (probably 6+" in the works).
Thanks,
Carl
03-31-2005, 07:27 PM
#2
Guest
Posts: n/a
Re: D60 in an XJ
Hi Carl,
I know many that have just reversed the steel rim centers to give
it a lot of back spacing. Your hubs will be hanging out there in harms
way, though. Around here, it cost a thousand bucks an axle to cut them
down, it's usually cheaper to buy the whole axle form Currie:
http://www.currieenterprises.com/
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Carl Saiyed wrote:
>
> A friend of mine has a 1980 Dodge Ramcharger with a bad transmission. It has
> a D60 rear, and a D44 front. Limited-slip in the rear, manual hubs up front.
>
> Is it reasonable to have these shortened to be installed on my 89 Cherokee
> after my next lift? (probably 6+" in the works).
>
> Thanks,
>
> Carl
I know many that have just reversed the steel rim centers to give
it a lot of back spacing. Your hubs will be hanging out there in harms
way, though. Around here, it cost a thousand bucks an axle to cut them
down, it's usually cheaper to buy the whole axle form Currie:
http://www.currieenterprises.com/
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Carl Saiyed wrote:
>
> A friend of mine has a 1980 Dodge Ramcharger with a bad transmission. It has
> a D60 rear, and a D44 front. Limited-slip in the rear, manual hubs up front.
>
> Is it reasonable to have these shortened to be installed on my 89 Cherokee
> after my next lift? (probably 6+" in the works).
>
> Thanks,
>
> Carl
03-31-2005, 07:27 PM
#3
Guest
Posts: n/a
Re: D60 in an XJ
Hi Carl,
I know many that have just reversed the steel rim centers to give
it a lot of back spacing. Your hubs will be hanging out there in harms
way, though. Around here, it cost a thousand bucks an axle to cut them
down, it's usually cheaper to buy the whole axle form Currie:
http://www.currieenterprises.com/
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Carl Saiyed wrote:
>
> A friend of mine has a 1980 Dodge Ramcharger with a bad transmission. It has
> a D60 rear, and a D44 front. Limited-slip in the rear, manual hubs up front.
>
> Is it reasonable to have these shortened to be installed on my 89 Cherokee
> after my next lift? (probably 6+" in the works).
>
> Thanks,
>
> Carl
I know many that have just reversed the steel rim centers to give
it a lot of back spacing. Your hubs will be hanging out there in harms
way, though. Around here, it cost a thousand bucks an axle to cut them
down, it's usually cheaper to buy the whole axle form Currie:
http://www.currieenterprises.com/
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Carl Saiyed wrote:
>
> A friend of mine has a 1980 Dodge Ramcharger with a bad transmission. It has
> a D60 rear, and a D44 front. Limited-slip in the rear, manual hubs up front.
>
> Is it reasonable to have these shortened to be installed on my 89 Cherokee
> after my next lift? (probably 6+" in the works).
>
> Thanks,
>
> Carl
03-31-2005, 07:27 PM
#4
Guest
Posts: n/a
Re: D60 in an XJ
Hi Carl,
I know many that have just reversed the steel rim centers to give
it a lot of back spacing. Your hubs will be hanging out there in harms
way, though. Around here, it cost a thousand bucks an axle to cut them
down, it's usually cheaper to buy the whole axle form Currie:
http://www.currieenterprises.com/
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Carl Saiyed wrote:
>
> A friend of mine has a 1980 Dodge Ramcharger with a bad transmission. It has
> a D60 rear, and a D44 front. Limited-slip in the rear, manual hubs up front.
>
> Is it reasonable to have these shortened to be installed on my 89 Cherokee
> after my next lift? (probably 6+" in the works).
>
> Thanks,
>
> Carl
I know many that have just reversed the steel rim centers to give
it a lot of back spacing. Your hubs will be hanging out there in harms
way, though. Around here, it cost a thousand bucks an axle to cut them
down, it's usually cheaper to buy the whole axle form Currie:
http://www.currieenterprises.com/
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Carl Saiyed wrote:
>
> A friend of mine has a 1980 Dodge Ramcharger with a bad transmission. It has
> a D60 rear, and a D44 front. Limited-slip in the rear, manual hubs up front.
>
> Is it reasonable to have these shortened to be installed on my 89 Cherokee
> after my next lift? (probably 6+" in the works).
>
> Thanks,
>
> Carl
03-31-2005, 08:30 PM
#5
Guest
Posts: n/a
Re: D60 in an XJ
Thanks, Bill. Looks like I wont be putting those under my XJ.
Carl
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:424C955E.536D5EF7@***.net...
> Hi Carl,
> I know many that have just reversed the steel rim centers to give
> it a lot of back spacing. Your hubs will be hanging out there in harms
> way, though. Around here, it cost a thousand bucks an axle to cut them
> down, it's usually cheaper to buy the whole axle form Currie:
> http://www.currieenterprises.com/
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> Carl Saiyed wrote:
> >
> > A friend of mine has a 1980 Dodge Ramcharger with a bad transmission. It
has
> > a D60 rear, and a D44 front. Limited-slip in the rear, manual hubs up
front.
> >
> > Is it reasonable to have these shortened to be installed on my 89
Cherokee
> > after my next lift? (probably 6+" in the works).
> >
> > Thanks,
> >
> > Carl
Carl
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:424C955E.536D5EF7@***.net...
> Hi Carl,
> I know many that have just reversed the steel rim centers to give
> it a lot of back spacing. Your hubs will be hanging out there in harms
> way, though. Around here, it cost a thousand bucks an axle to cut them
> down, it's usually cheaper to buy the whole axle form Currie:
> http://www.currieenterprises.com/
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> Carl Saiyed wrote:
> >
> > A friend of mine has a 1980 Dodge Ramcharger with a bad transmission. It
has
> > a D60 rear, and a D44 front. Limited-slip in the rear, manual hubs up
front.
> >
> > Is it reasonable to have these shortened to be installed on my 89
Cherokee
> > after my next lift? (probably 6+" in the works).
> >
> > Thanks,
> >
> > Carl
03-31-2005, 08:30 PM
#6
Guest
Posts: n/a
Re: D60 in an XJ
Thanks, Bill. Looks like I wont be putting those under my XJ.
Carl
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:424C955E.536D5EF7@***.net...
> Hi Carl,
> I know many that have just reversed the steel rim centers to give
> it a lot of back spacing. Your hubs will be hanging out there in harms
> way, though. Around here, it cost a thousand bucks an axle to cut them
> down, it's usually cheaper to buy the whole axle form Currie:
> http://www.currieenterprises.com/
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> Carl Saiyed wrote:
> >
> > A friend of mine has a 1980 Dodge Ramcharger with a bad transmission. It
has
> > a D60 rear, and a D44 front. Limited-slip in the rear, manual hubs up
front.
> >
> > Is it reasonable to have these shortened to be installed on my 89
Cherokee
> > after my next lift? (probably 6+" in the works).
> >
> > Thanks,
> >
> > Carl
Carl
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:424C955E.536D5EF7@***.net...
> Hi Carl,
> I know many that have just reversed the steel rim centers to give
> it a lot of back spacing. Your hubs will be hanging out there in harms
> way, though. Around here, it cost a thousand bucks an axle to cut them
> down, it's usually cheaper to buy the whole axle form Currie:
> http://www.currieenterprises.com/
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> Carl Saiyed wrote:
> >
> > A friend of mine has a 1980 Dodge Ramcharger with a bad transmission. It
has
> > a D60 rear, and a D44 front. Limited-slip in the rear, manual hubs up
front.
> >
> > Is it reasonable to have these shortened to be installed on my 89
Cherokee
> > after my next lift? (probably 6+" in the works).
> >
> > Thanks,
> >
> > Carl
03-31-2005, 08:30 PM
#7
Guest
Posts: n/a
Re: D60 in an XJ
Thanks, Bill. Looks like I wont be putting those under my XJ.
Carl
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:424C955E.536D5EF7@***.net...
> Hi Carl,
> I know many that have just reversed the steel rim centers to give
> it a lot of back spacing. Your hubs will be hanging out there in harms
> way, though. Around here, it cost a thousand bucks an axle to cut them
> down, it's usually cheaper to buy the whole axle form Currie:
> http://www.currieenterprises.com/
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> Carl Saiyed wrote:
> >
> > A friend of mine has a 1980 Dodge Ramcharger with a bad transmission. It
has
> > a D60 rear, and a D44 front. Limited-slip in the rear, manual hubs up
front.
> >
> > Is it reasonable to have these shortened to be installed on my 89
Cherokee
> > after my next lift? (probably 6+" in the works).
> >
> > Thanks,
> >
> > Carl
Carl
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:424C955E.536D5EF7@***.net...
> Hi Carl,
> I know many that have just reversed the steel rim centers to give
> it a lot of back spacing. Your hubs will be hanging out there in harms
> way, though. Around here, it cost a thousand bucks an axle to cut them
> down, it's usually cheaper to buy the whole axle form Currie:
> http://www.currieenterprises.com/
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> Carl Saiyed wrote:
> >
> > A friend of mine has a 1980 Dodge Ramcharger with a bad transmission. It
has
> > a D60 rear, and a D44 front. Limited-slip in the rear, manual hubs up
front.
> >
> > Is it reasonable to have these shortened to be installed on my 89
Cherokee
> > after my next lift? (probably 6+" in the works).
> >
> > Thanks,
> >
> > Carl
03-31-2005, 08:50 PM
#8
Guest
Posts: n/a
Re: D60 in an XJ
Many Jeepers would, though, if the axles don't have Kalifornia SMOG
ratios.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Carl Saiyed wrote:
>
> Thanks, Bill. Looks like I wont be putting those under my XJ.
>
> Carl
ratios.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Carl Saiyed wrote:
>
> Thanks, Bill. Looks like I wont be putting those under my XJ.
>
> Carl
03-31-2005, 08:50 PM
#9
Guest
Posts: n/a
Re: D60 in an XJ
Many Jeepers would, though, if the axles don't have Kalifornia SMOG
ratios.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Carl Saiyed wrote:
>
> Thanks, Bill. Looks like I wont be putting those under my XJ.
>
> Carl
ratios.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Carl Saiyed wrote:
>
> Thanks, Bill. Looks like I wont be putting those under my XJ.
>
> Carl
03-31-2005, 08:50 PM
#10
Guest
Posts: n/a
Re: D60 in an XJ
Many Jeepers would, though, if the axles don't have Kalifornia SMOG
ratios.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Carl Saiyed wrote:
>
> Thanks, Bill. Looks like I wont be putting those under my XJ.
>
> Carl
ratios.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Carl Saiyed wrote:
>
> Thanks, Bill. Looks like I wont be putting those under my XJ.
>
> Carl
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
