|
D60 in an XJ
A friend of mine has a 1980 Dodge Ramcharger with a bad transmission. It has
a D60 rear, and a D44 front. Limited-slip in the rear, manual hubs up front. Is it reasonable to have these shortened to be installed on my 89 Cherokee after my next lift? (probably 6+" in the works). Thanks, Carl |
Re: D60 in an XJ
Hi Carl,
I know many that have just reversed the steel rim centers to give it a lot of back spacing. Your hubs will be hanging out there in harms way, though. Around here, it cost a thousand bucks an axle to cut them down, it's usually cheaper to buy the whole axle form Currie: http://www.currieenterprises.com/ God Bless America, ßill O|||||||O mailto:-------------------- http://www.----------.com/ Carl Saiyed wrote: > > A friend of mine has a 1980 Dodge Ramcharger with a bad transmission. It has > a D60 rear, and a D44 front. Limited-slip in the rear, manual hubs up front. > > Is it reasonable to have these shortened to be installed on my 89 Cherokee > after my next lift? (probably 6+" in the works). > > Thanks, > > Carl |
Re: D60 in an XJ
Hi Carl,
I know many that have just reversed the steel rim centers to give it a lot of back spacing. Your hubs will be hanging out there in harms way, though. Around here, it cost a thousand bucks an axle to cut them down, it's usually cheaper to buy the whole axle form Currie: http://www.currieenterprises.com/ God Bless America, ßill O|||||||O mailto:-------------------- http://www.----------.com/ Carl Saiyed wrote: > > A friend of mine has a 1980 Dodge Ramcharger with a bad transmission. It has > a D60 rear, and a D44 front. Limited-slip in the rear, manual hubs up front. > > Is it reasonable to have these shortened to be installed on my 89 Cherokee > after my next lift? (probably 6+" in the works). > > Thanks, > > Carl |
Re: D60 in an XJ
Hi Carl,
I know many that have just reversed the steel rim centers to give it a lot of back spacing. Your hubs will be hanging out there in harms way, though. Around here, it cost a thousand bucks an axle to cut them down, it's usually cheaper to buy the whole axle form Currie: http://www.currieenterprises.com/ God Bless America, ßill O|||||||O mailto:-------------------- http://www.----------.com/ Carl Saiyed wrote: > > A friend of mine has a 1980 Dodge Ramcharger with a bad transmission. It has > a D60 rear, and a D44 front. Limited-slip in the rear, manual hubs up front. > > Is it reasonable to have these shortened to be installed on my 89 Cherokee > after my next lift? (probably 6+" in the works). > > Thanks, > > Carl |
Re: D60 in an XJ
Thanks, Bill. Looks like I wont be putting those under my XJ.
Carl "L.W. (ßill) ------ III" <----------@cox.net> wrote in message news:424C955E.536D5EF7@cox.net... > Hi Carl, > I know many that have just reversed the steel rim centers to give > it a lot of back spacing. Your hubs will be hanging out there in harms > way, though. Around here, it cost a thousand bucks an axle to cut them > down, it's usually cheaper to buy the whole axle form Currie: > http://www.currieenterprises.com/ > God Bless America, ßill O|||||||O > mailto:-------------------- http://www.----------.com/ > > Carl Saiyed wrote: > > > > A friend of mine has a 1980 Dodge Ramcharger with a bad transmission. It has > > a D60 rear, and a D44 front. Limited-slip in the rear, manual hubs up front. > > > > Is it reasonable to have these shortened to be installed on my 89 Cherokee > > after my next lift? (probably 6+" in the works). > > > > Thanks, > > > > Carl |
Re: D60 in an XJ
Thanks, Bill. Looks like I wont be putting those under my XJ.
Carl "L.W. (ßill) ------ III" <----------@cox.net> wrote in message news:424C955E.536D5EF7@cox.net... > Hi Carl, > I know many that have just reversed the steel rim centers to give > it a lot of back spacing. Your hubs will be hanging out there in harms > way, though. Around here, it cost a thousand bucks an axle to cut them > down, it's usually cheaper to buy the whole axle form Currie: > http://www.currieenterprises.com/ > God Bless America, ßill O|||||||O > mailto:-------------------- http://www.----------.com/ > > Carl Saiyed wrote: > > > > A friend of mine has a 1980 Dodge Ramcharger with a bad transmission. It has > > a D60 rear, and a D44 front. Limited-slip in the rear, manual hubs up front. > > > > Is it reasonable to have these shortened to be installed on my 89 Cherokee > > after my next lift? (probably 6+" in the works). > > > > Thanks, > > > > Carl |
Re: D60 in an XJ
Thanks, Bill. Looks like I wont be putting those under my XJ.
Carl "L.W. (ßill) ------ III" <----------@cox.net> wrote in message news:424C955E.536D5EF7@cox.net... > Hi Carl, > I know many that have just reversed the steel rim centers to give > it a lot of back spacing. Your hubs will be hanging out there in harms > way, though. Around here, it cost a thousand bucks an axle to cut them > down, it's usually cheaper to buy the whole axle form Currie: > http://www.currieenterprises.com/ > God Bless America, ßill O|||||||O > mailto:-------------------- http://www.----------.com/ > > Carl Saiyed wrote: > > > > A friend of mine has a 1980 Dodge Ramcharger with a bad transmission. It has > > a D60 rear, and a D44 front. Limited-slip in the rear, manual hubs up front. > > > > Is it reasonable to have these shortened to be installed on my 89 Cherokee > > after my next lift? (probably 6+" in the works). > > > > Thanks, > > > > Carl |
Re: D60 in an XJ
Many Jeepers would, though, if the axles don't have Kalifornia SMOG
ratios. God Bless America, ßill O|||||||O mailto:-------------------- http://www.----------.com/ Carl Saiyed wrote: > > Thanks, Bill. Looks like I wont be putting those under my XJ. > > Carl |
Re: D60 in an XJ
Many Jeepers would, though, if the axles don't have Kalifornia SMOG
ratios. God Bless America, ßill O|||||||O mailto:-------------------- http://www.----------.com/ Carl Saiyed wrote: > > Thanks, Bill. Looks like I wont be putting those under my XJ. > > Carl |
Re: D60 in an XJ
Many Jeepers would, though, if the axles don't have Kalifornia SMOG
ratios. God Bless America, ßill O|||||||O mailto:-------------------- http://www.----------.com/ Carl Saiyed wrote: > > Thanks, Bill. Looks like I wont be putting those under my XJ. > > Carl |
| All times are GMT -4. The time now is 04:08 PM. |
© 2024 MH Sub I, LLC dba Internet Brands