CY7 Clutch Linkage
Guest
Posts: n/a
Re: CY7 Clutch Linkage
>A Google search
>>> found a company named tellico4x4 that claims to sell a heim joint clutch
>>> linkage assemble for CJ's that should completely eliminate the joint wear
>>> in the OEM linkage. Does anybody have any experience ....
Try Tri-County Gear in Pomona CA. Jason has been manufacturing and marketing a
heim-joint replacement clutch rod for years. I have had one since 1988 - no
problems at all.
Robert Bills
KG6LMV
Orange County CA
'83 CJ-7
'46 Bantam BT3C
'87 Ford F250 4x4 Diesel
http://www.outdoorwire.com/4x4/jeep/...p-l/billsr.htm
>>> found a company named tellico4x4 that claims to sell a heim joint clutch
>>> linkage assemble for CJ's that should completely eliminate the joint wear
>>> in the OEM linkage. Does anybody have any experience ....
Try Tri-County Gear in Pomona CA. Jason has been manufacturing and marketing a
heim-joint replacement clutch rod for years. I have had one since 1988 - no
problems at all.
Robert Bills
KG6LMV
Orange County CA
'83 CJ-7
'46 Bantam BT3C
'87 Ford F250 4x4 Diesel
http://www.outdoorwire.com/4x4/jeep/...p-l/billsr.htm
Guest
Posts: n/a
Re: CY7 Clutch Linkage
>A Google search
>>> found a company named tellico4x4 that claims to sell a heim joint clutch
>>> linkage assemble for CJ's that should completely eliminate the joint wear
>>> in the OEM linkage. Does anybody have any experience ....
Try Tri-County Gear in Pomona CA. Jason has been manufacturing and marketing a
heim-joint replacement clutch rod for years. I have had one since 1988 - no
problems at all.
Robert Bills
KG6LMV
Orange County CA
'83 CJ-7
'46 Bantam BT3C
'87 Ford F250 4x4 Diesel
http://www.outdoorwire.com/4x4/jeep/...p-l/billsr.htm
>>> found a company named tellico4x4 that claims to sell a heim joint clutch
>>> linkage assemble for CJ's that should completely eliminate the joint wear
>>> in the OEM linkage. Does anybody have any experience ....
Try Tri-County Gear in Pomona CA. Jason has been manufacturing and marketing a
heim-joint replacement clutch rod for years. I have had one since 1988 - no
problems at all.
Robert Bills
KG6LMV
Orange County CA
'83 CJ-7
'46 Bantam BT3C
'87 Ford F250 4x4 Diesel
http://www.outdoorwire.com/4x4/jeep/...p-l/billsr.htm
Guest
Posts: n/a
Re: CY7 Clutch Linkage
>A Google search
>>> found a company named tellico4x4 that claims to sell a heim joint clutch
>>> linkage assemble for CJ's that should completely eliminate the joint wear
>>> in the OEM linkage. Does anybody have any experience ....
Try Tri-County Gear in Pomona CA. Jason has been manufacturing and marketing a
heim-joint replacement clutch rod for years. I have had one since 1988 - no
problems at all.
Robert Bills
KG6LMV
Orange County CA
'83 CJ-7
'46 Bantam BT3C
'87 Ford F250 4x4 Diesel
http://www.outdoorwire.com/4x4/jeep/...p-l/billsr.htm
>>> found a company named tellico4x4 that claims to sell a heim joint clutch
>>> linkage assemble for CJ's that should completely eliminate the joint wear
>>> in the OEM linkage. Does anybody have any experience ....
Try Tri-County Gear in Pomona CA. Jason has been manufacturing and marketing a
heim-joint replacement clutch rod for years. I have had one since 1988 - no
problems at all.
Robert Bills
KG6LMV
Orange County CA
'83 CJ-7
'46 Bantam BT3C
'87 Ford F250 4x4 Diesel
http://www.outdoorwire.com/4x4/jeep/...p-l/billsr.htm
Guest
Posts: n/a
Re: CY7 Clutch Linkage
I have no experience with the company you asked about, but I made my own
heim joint clutch linkage and it works really good.
I bought a piece of stuff called all-thread. It's like a bolt, but 3 or 4
ft long and has no head, just threads. I bought the fine-thread version.
Then at the same hardware store, I found a heim joint that mysteriously had
the same thread as the all-thread. I cut the all-thread to the desired
length, and presto chango, clutch linkage that has never broken again.
My application is the '81 CJ5 with the 258 and mechanical clutch linkage.
"breyfogle" <breyfogle@aol.com> wrote in message
news:I5FzE2.J6M@news.boeing.com...
> Vehicle is an '83 CJ7, 258/T5.
>
> I'm getting tired of replacing the clutch linkage parts (mostly the
> bellcrack, upper and lower rods) every 4 to 5 years. A Google search
found
> a company named tellico4x4 that claims to sell a heim joint clutch linkage
> assemble for CJ's that should completely eliminate the joint wear in the
OEM
> linkage. Does anybody have any experience (good or bad) with either this
> company or their products ?
>
>
heim joint clutch linkage and it works really good.
I bought a piece of stuff called all-thread. It's like a bolt, but 3 or 4
ft long and has no head, just threads. I bought the fine-thread version.
Then at the same hardware store, I found a heim joint that mysteriously had
the same thread as the all-thread. I cut the all-thread to the desired
length, and presto chango, clutch linkage that has never broken again.
My application is the '81 CJ5 with the 258 and mechanical clutch linkage.
"breyfogle" <breyfogle@aol.com> wrote in message
news:I5FzE2.J6M@news.boeing.com...
> Vehicle is an '83 CJ7, 258/T5.
>
> I'm getting tired of replacing the clutch linkage parts (mostly the
> bellcrack, upper and lower rods) every 4 to 5 years. A Google search
found
> a company named tellico4x4 that claims to sell a heim joint clutch linkage
> assemble for CJ's that should completely eliminate the joint wear in the
OEM
> linkage. Does anybody have any experience (good or bad) with either this
> company or their products ?
>
>
Guest
Posts: n/a
Re: CY7 Clutch Linkage
I have no experience with the company you asked about, but I made my own
heim joint clutch linkage and it works really good.
I bought a piece of stuff called all-thread. It's like a bolt, but 3 or 4
ft long and has no head, just threads. I bought the fine-thread version.
Then at the same hardware store, I found a heim joint that mysteriously had
the same thread as the all-thread. I cut the all-thread to the desired
length, and presto chango, clutch linkage that has never broken again.
My application is the '81 CJ5 with the 258 and mechanical clutch linkage.
"breyfogle" <breyfogle@aol.com> wrote in message
news:I5FzE2.J6M@news.boeing.com...
> Vehicle is an '83 CJ7, 258/T5.
>
> I'm getting tired of replacing the clutch linkage parts (mostly the
> bellcrack, upper and lower rods) every 4 to 5 years. A Google search
found
> a company named tellico4x4 that claims to sell a heim joint clutch linkage
> assemble for CJ's that should completely eliminate the joint wear in the
OEM
> linkage. Does anybody have any experience (good or bad) with either this
> company or their products ?
>
>
heim joint clutch linkage and it works really good.
I bought a piece of stuff called all-thread. It's like a bolt, but 3 or 4
ft long and has no head, just threads. I bought the fine-thread version.
Then at the same hardware store, I found a heim joint that mysteriously had
the same thread as the all-thread. I cut the all-thread to the desired
length, and presto chango, clutch linkage that has never broken again.
My application is the '81 CJ5 with the 258 and mechanical clutch linkage.
"breyfogle" <breyfogle@aol.com> wrote in message
news:I5FzE2.J6M@news.boeing.com...
> Vehicle is an '83 CJ7, 258/T5.
>
> I'm getting tired of replacing the clutch linkage parts (mostly the
> bellcrack, upper and lower rods) every 4 to 5 years. A Google search
found
> a company named tellico4x4 that claims to sell a heim joint clutch linkage
> assemble for CJ's that should completely eliminate the joint wear in the
OEM
> linkage. Does anybody have any experience (good or bad) with either this
> company or their products ?
>
>
Guest
Posts: n/a
Re: CY7 Clutch Linkage
I have no experience with the company you asked about, but I made my own
heim joint clutch linkage and it works really good.
I bought a piece of stuff called all-thread. It's like a bolt, but 3 or 4
ft long and has no head, just threads. I bought the fine-thread version.
Then at the same hardware store, I found a heim joint that mysteriously had
the same thread as the all-thread. I cut the all-thread to the desired
length, and presto chango, clutch linkage that has never broken again.
My application is the '81 CJ5 with the 258 and mechanical clutch linkage.
"breyfogle" <breyfogle@aol.com> wrote in message
news:I5FzE2.J6M@news.boeing.com...
> Vehicle is an '83 CJ7, 258/T5.
>
> I'm getting tired of replacing the clutch linkage parts (mostly the
> bellcrack, upper and lower rods) every 4 to 5 years. A Google search
found
> a company named tellico4x4 that claims to sell a heim joint clutch linkage
> assemble for CJ's that should completely eliminate the joint wear in the
OEM
> linkage. Does anybody have any experience (good or bad) with either this
> company or their products ?
>
>
heim joint clutch linkage and it works really good.
I bought a piece of stuff called all-thread. It's like a bolt, but 3 or 4
ft long and has no head, just threads. I bought the fine-thread version.
Then at the same hardware store, I found a heim joint that mysteriously had
the same thread as the all-thread. I cut the all-thread to the desired
length, and presto chango, clutch linkage that has never broken again.
My application is the '81 CJ5 with the 258 and mechanical clutch linkage.
"breyfogle" <breyfogle@aol.com> wrote in message
news:I5FzE2.J6M@news.boeing.com...
> Vehicle is an '83 CJ7, 258/T5.
>
> I'm getting tired of replacing the clutch linkage parts (mostly the
> bellcrack, upper and lower rods) every 4 to 5 years. A Google search
found
> a company named tellico4x4 that claims to sell a heim joint clutch linkage
> assemble for CJ's that should completely eliminate the joint wear in the
OEM
> linkage. Does anybody have any experience (good or bad) with either this
> company or their products ?
>
>
Guest
Posts: n/a
Re: CY7 Clutch Linkage
Interesting option. Did the all-thread rod just happen to allow attachment
of the jamnut adjuster ? If not how did you (1) adjust the length and (2)
connect to the throwout arm ?
Thanks
"CRWLR" <beerman@yahoo.com> wrote in message
news:10mr80k64jd5q82@corp.supernews.com...
> I have no experience with the company you asked about, but I made my own
> heim joint clutch linkage and it works really good.
>
> I bought a piece of stuff called all-thread. It's like a bolt, but 3 or 4
> ft long and has no head, just threads. I bought the fine-thread version.
> Then at the same hardware store, I found a heim joint that mysteriously
had
> the same thread as the all-thread. I cut the all-thread to the desired
> length, and presto chango, clutch linkage that has never broken again.
>
> My application is the '81 CJ5 with the 258 and mechanical clutch linkage.
>
>
>
>
> "breyfogle" <breyfogle@aol.com> wrote in message
> news:I5FzE2.J6M@news.boeing.com...
> > Vehicle is an '83 CJ7, 258/T5.
> >
> > I'm getting tired of replacing the clutch linkage parts (mostly the
> > bellcrack, upper and lower rods) every 4 to 5 years. A Google search
> found
> > a company named tellico4x4 that claims to sell a heim joint clutch
linkage
> > assemble for CJ's that should completely eliminate the joint wear in the
> OEM
> > linkage. Does anybody have any experience (good or bad) with either
this
> > company or their products ?
> >
> >
>
>
of the jamnut adjuster ? If not how did you (1) adjust the length and (2)
connect to the throwout arm ?
Thanks
"CRWLR" <beerman@yahoo.com> wrote in message
news:10mr80k64jd5q82@corp.supernews.com...
> I have no experience with the company you asked about, but I made my own
> heim joint clutch linkage and it works really good.
>
> I bought a piece of stuff called all-thread. It's like a bolt, but 3 or 4
> ft long and has no head, just threads. I bought the fine-thread version.
> Then at the same hardware store, I found a heim joint that mysteriously
had
> the same thread as the all-thread. I cut the all-thread to the desired
> length, and presto chango, clutch linkage that has never broken again.
>
> My application is the '81 CJ5 with the 258 and mechanical clutch linkage.
>
>
>
>
> "breyfogle" <breyfogle@aol.com> wrote in message
> news:I5FzE2.J6M@news.boeing.com...
> > Vehicle is an '83 CJ7, 258/T5.
> >
> > I'm getting tired of replacing the clutch linkage parts (mostly the
> > bellcrack, upper and lower rods) every 4 to 5 years. A Google search
> found
> > a company named tellico4x4 that claims to sell a heim joint clutch
linkage
> > assemble for CJ's that should completely eliminate the joint wear in the
> OEM
> > linkage. Does anybody have any experience (good or bad) with either
this
> > company or their products ?
> >
> >
>
>
Guest
Posts: n/a
Re: CY7 Clutch Linkage
Interesting option. Did the all-thread rod just happen to allow attachment
of the jamnut adjuster ? If not how did you (1) adjust the length and (2)
connect to the throwout arm ?
Thanks
"CRWLR" <beerman@yahoo.com> wrote in message
news:10mr80k64jd5q82@corp.supernews.com...
> I have no experience with the company you asked about, but I made my own
> heim joint clutch linkage and it works really good.
>
> I bought a piece of stuff called all-thread. It's like a bolt, but 3 or 4
> ft long and has no head, just threads. I bought the fine-thread version.
> Then at the same hardware store, I found a heim joint that mysteriously
had
> the same thread as the all-thread. I cut the all-thread to the desired
> length, and presto chango, clutch linkage that has never broken again.
>
> My application is the '81 CJ5 with the 258 and mechanical clutch linkage.
>
>
>
>
> "breyfogle" <breyfogle@aol.com> wrote in message
> news:I5FzE2.J6M@news.boeing.com...
> > Vehicle is an '83 CJ7, 258/T5.
> >
> > I'm getting tired of replacing the clutch linkage parts (mostly the
> > bellcrack, upper and lower rods) every 4 to 5 years. A Google search
> found
> > a company named tellico4x4 that claims to sell a heim joint clutch
linkage
> > assemble for CJ's that should completely eliminate the joint wear in the
> OEM
> > linkage. Does anybody have any experience (good or bad) with either
this
> > company or their products ?
> >
> >
>
>
of the jamnut adjuster ? If not how did you (1) adjust the length and (2)
connect to the throwout arm ?
Thanks
"CRWLR" <beerman@yahoo.com> wrote in message
news:10mr80k64jd5q82@corp.supernews.com...
> I have no experience with the company you asked about, but I made my own
> heim joint clutch linkage and it works really good.
>
> I bought a piece of stuff called all-thread. It's like a bolt, but 3 or 4
> ft long and has no head, just threads. I bought the fine-thread version.
> Then at the same hardware store, I found a heim joint that mysteriously
had
> the same thread as the all-thread. I cut the all-thread to the desired
> length, and presto chango, clutch linkage that has never broken again.
>
> My application is the '81 CJ5 with the 258 and mechanical clutch linkage.
>
>
>
>
> "breyfogle" <breyfogle@aol.com> wrote in message
> news:I5FzE2.J6M@news.boeing.com...
> > Vehicle is an '83 CJ7, 258/T5.
> >
> > I'm getting tired of replacing the clutch linkage parts (mostly the
> > bellcrack, upper and lower rods) every 4 to 5 years. A Google search
> found
> > a company named tellico4x4 that claims to sell a heim joint clutch
linkage
> > assemble for CJ's that should completely eliminate the joint wear in the
> OEM
> > linkage. Does anybody have any experience (good or bad) with either
this
> > company or their products ?
> >
> >
>
>
Guest
Posts: n/a
Re: CY7 Clutch Linkage
Interesting option. Did the all-thread rod just happen to allow attachment
of the jamnut adjuster ? If not how did you (1) adjust the length and (2)
connect to the throwout arm ?
Thanks
"CRWLR" <beerman@yahoo.com> wrote in message
news:10mr80k64jd5q82@corp.supernews.com...
> I have no experience with the company you asked about, but I made my own
> heim joint clutch linkage and it works really good.
>
> I bought a piece of stuff called all-thread. It's like a bolt, but 3 or 4
> ft long and has no head, just threads. I bought the fine-thread version.
> Then at the same hardware store, I found a heim joint that mysteriously
had
> the same thread as the all-thread. I cut the all-thread to the desired
> length, and presto chango, clutch linkage that has never broken again.
>
> My application is the '81 CJ5 with the 258 and mechanical clutch linkage.
>
>
>
>
> "breyfogle" <breyfogle@aol.com> wrote in message
> news:I5FzE2.J6M@news.boeing.com...
> > Vehicle is an '83 CJ7, 258/T5.
> >
> > I'm getting tired of replacing the clutch linkage parts (mostly the
> > bellcrack, upper and lower rods) every 4 to 5 years. A Google search
> found
> > a company named tellico4x4 that claims to sell a heim joint clutch
linkage
> > assemble for CJ's that should completely eliminate the joint wear in the
> OEM
> > linkage. Does anybody have any experience (good or bad) with either
this
> > company or their products ?
> >
> >
>
>
of the jamnut adjuster ? If not how did you (1) adjust the length and (2)
connect to the throwout arm ?
Thanks
"CRWLR" <beerman@yahoo.com> wrote in message
news:10mr80k64jd5q82@corp.supernews.com...
> I have no experience with the company you asked about, but I made my own
> heim joint clutch linkage and it works really good.
>
> I bought a piece of stuff called all-thread. It's like a bolt, but 3 or 4
> ft long and has no head, just threads. I bought the fine-thread version.
> Then at the same hardware store, I found a heim joint that mysteriously
had
> the same thread as the all-thread. I cut the all-thread to the desired
> length, and presto chango, clutch linkage that has never broken again.
>
> My application is the '81 CJ5 with the 258 and mechanical clutch linkage.
>
>
>
>
> "breyfogle" <breyfogle@aol.com> wrote in message
> news:I5FzE2.J6M@news.boeing.com...
> > Vehicle is an '83 CJ7, 258/T5.
> >
> > I'm getting tired of replacing the clutch linkage parts (mostly the
> > bellcrack, upper and lower rods) every 4 to 5 years. A Google search
> found
> > a company named tellico4x4 that claims to sell a heim joint clutch
linkage
> > assemble for CJ's that should completely eliminate the joint wear in the
> OEM
> > linkage. Does anybody have any experience (good or bad) with either
this
> > company or their products ?
> >
> >
>
>
Guest
Posts: n/a
Re: CY7 Clutch Linkage
I have used all thread to build part of a CJ clutch linkage for a
Mustang T5 and it threaded right on to the parts including the jam nut.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
breyfogle wrote:
>
> Interesting option. Did the all-thread rod just happen to allow attachment
> of the jamnut adjuster ? If not how did you (1) adjust the length and (2)
> connect to the throwout arm ?
>
> Thanks
>
> "CRWLR" <beerman@yahoo.com> wrote in message
> news:10mr80k64jd5q82@corp.supernews.com...
> > I have no experience with the company you asked about, but I made my own
> > heim joint clutch linkage and it works really good.
> >
> > I bought a piece of stuff called all-thread. It's like a bolt, but 3 or 4
> > ft long and has no head, just threads. I bought the fine-thread version.
> > Then at the same hardware store, I found a heim joint that mysteriously
> had
> > the same thread as the all-thread. I cut the all-thread to the desired
> > length, and presto chango, clutch linkage that has never broken again.
> >
> > My application is the '81 CJ5 with the 258 and mechanical clutch linkage.
> >
> >
> >
> >
> > "breyfogle" <breyfogle@aol.com> wrote in message
> > news:I5FzE2.J6M@news.boeing.com...
> > > Vehicle is an '83 CJ7, 258/T5.
> > >
> > > I'm getting tired of replacing the clutch linkage parts (mostly the
> > > bellcrack, upper and lower rods) every 4 to 5 years. A Google search
> > found
> > > a company named tellico4x4 that claims to sell a heim joint clutch
> linkage
> > > assemble for CJ's that should completely eliminate the joint wear in the
> > OEM
> > > linkage. Does anybody have any experience (good or bad) with either
> this
> > > company or their products ?
> > >
> > >
> >
> >
Mustang T5 and it threaded right on to the parts including the jam nut.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
breyfogle wrote:
>
> Interesting option. Did the all-thread rod just happen to allow attachment
> of the jamnut adjuster ? If not how did you (1) adjust the length and (2)
> connect to the throwout arm ?
>
> Thanks
>
> "CRWLR" <beerman@yahoo.com> wrote in message
> news:10mr80k64jd5q82@corp.supernews.com...
> > I have no experience with the company you asked about, but I made my own
> > heim joint clutch linkage and it works really good.
> >
> > I bought a piece of stuff called all-thread. It's like a bolt, but 3 or 4
> > ft long and has no head, just threads. I bought the fine-thread version.
> > Then at the same hardware store, I found a heim joint that mysteriously
> had
> > the same thread as the all-thread. I cut the all-thread to the desired
> > length, and presto chango, clutch linkage that has never broken again.
> >
> > My application is the '81 CJ5 with the 258 and mechanical clutch linkage.
> >
> >
> >
> >
> > "breyfogle" <breyfogle@aol.com> wrote in message
> > news:I5FzE2.J6M@news.boeing.com...
> > > Vehicle is an '83 CJ7, 258/T5.
> > >
> > > I'm getting tired of replacing the clutch linkage parts (mostly the
> > > bellcrack, upper and lower rods) every 4 to 5 years. A Google search
> > found
> > > a company named tellico4x4 that claims to sell a heim joint clutch
> linkage
> > > assemble for CJ's that should completely eliminate the joint wear in the
> > OEM
> > > linkage. Does anybody have any experience (good or bad) with either
> this
> > > company or their products ?
> > >
> > >
> >
> >
