CY7 Clutch Linkage
10-11-2004, 06:49 PM
#1
Guest
Posts: n/a
CY7 Clutch Linkage
Vehicle is an '83 CJ7, 258/T5.
I'm getting tired of replacing the clutch linkage parts (mostly the
bellcrack, upper and lower rods) every 4 to 5 years. A Google search found
a company named tellico4x4 that claims to sell a heim joint clutch linkage
assemble for CJ's that should completely eliminate the joint wear in the OEM
linkage. Does anybody have any experience (good or bad) with either this
company or their products ?
I'm getting tired of replacing the clutch linkage parts (mostly the
bellcrack, upper and lower rods) every 4 to 5 years. A Google search found
a company named tellico4x4 that claims to sell a heim joint clutch linkage
assemble for CJ's that should completely eliminate the joint wear in the OEM
linkage. Does anybody have any experience (good or bad) with either this
company or their products ?
10-11-2004, 07:54 PM
#2
Guest
Posts: n/a
Re: CY7 Clutch Linkage
> I'm getting tired of replacing the clutch linkage parts (mostly the
> bellcrack, upper and lower rods) every 4 to 5 years. A Google search
> found a company named tellico4x4 that claims to sell a heim joint clutch
> linkage assemble for CJ's that should completely eliminate the joint wear
> in the OEM linkage. Does anybody have any experience (good or bad) with
> either this
company or their products ?>
Tellico is a reputable outfit. Not sure if it's the same brand as the one
some of the folks in our club are running on CJs, but they swear by 'em.
>
>
> bellcrack, upper and lower rods) every 4 to 5 years. A Google search
> found a company named tellico4x4 that claims to sell a heim joint clutch
> linkage assemble for CJ's that should completely eliminate the joint wear
> in the OEM linkage. Does anybody have any experience (good or bad) with
> either this
company or their products ?>
Tellico is a reputable outfit. Not sure if it's the same brand as the one
some of the folks in our club are running on CJs, but they swear by 'em.
>
>
10-11-2004, 07:54 PM
#3
Guest
Posts: n/a
Re: CY7 Clutch Linkage
> I'm getting tired of replacing the clutch linkage parts (mostly the
> bellcrack, upper and lower rods) every 4 to 5 years. A Google search
> found a company named tellico4x4 that claims to sell a heim joint clutch
> linkage assemble for CJ's that should completely eliminate the joint wear
> in the OEM linkage. Does anybody have any experience (good or bad) with
> either this
company or their products ?>
Tellico is a reputable outfit. Not sure if it's the same brand as the one
some of the folks in our club are running on CJs, but they swear by 'em.
>
>
> bellcrack, upper and lower rods) every 4 to 5 years. A Google search
> found a company named tellico4x4 that claims to sell a heim joint clutch
> linkage assemble for CJ's that should completely eliminate the joint wear
> in the OEM linkage. Does anybody have any experience (good or bad) with
> either this
company or their products ?>
Tellico is a reputable outfit. Not sure if it's the same brand as the one
some of the folks in our club are running on CJs, but they swear by 'em.
>
>
10-11-2004, 07:54 PM
#4
Guest
Posts: n/a
Re: CY7 Clutch Linkage
> I'm getting tired of replacing the clutch linkage parts (mostly the
> bellcrack, upper and lower rods) every 4 to 5 years. A Google search
> found a company named tellico4x4 that claims to sell a heim joint clutch
> linkage assemble for CJ's that should completely eliminate the joint wear
> in the OEM linkage. Does anybody have any experience (good or bad) with
> either this
company or their products ?>
Tellico is a reputable outfit. Not sure if it's the same brand as the one
some of the folks in our club are running on CJs, but they swear by 'em.
>
>
> bellcrack, upper and lower rods) every 4 to 5 years. A Google search
> found a company named tellico4x4 that claims to sell a heim joint clutch
> linkage assemble for CJ's that should completely eliminate the joint wear
> in the OEM linkage. Does anybody have any experience (good or bad) with
> either this
company or their products ?>
Tellico is a reputable outfit. Not sure if it's the same brand as the one
some of the folks in our club are running on CJs, but they swear by 'em.
>
>
10-11-2004, 07:58 PM
#5
Guest
Posts: n/a
Re: CY7 Clutch Linkage
Did you notice there's a zerk fitting on that bell crank? I don't
know if you could design the joints between the engine and frame to
slide back and forth as they have to, using heim joints. I think you'll
be happiest with a complete repair, new ball joints and their brass
halves, that you probably did know were in there, as they wear in two
and fall out. Or, you might think about converting to hydraulic, that
works for me: http://www.----------.com/slave.jpg But, you'll loose the
helper spring.
God Bless America, ßill O|||||||O
mailto:--------------------
breyfogle wrote:
>
> Vehicle is an '83 CJ7, 258/T5.
>
> I'm getting tired of replacing the clutch linkage parts (mostly the
> bellcrack, upper and lower rods) every 4 to 5 years. A Google search found
> a company named tellico4x4 that claims to sell a heim joint clutch linkage
> assemble for CJ's that should completely eliminate the joint wear in the OEM
> linkage. Does anybody have any experience (good or bad) with either this
> company or their products ?
know if you could design the joints between the engine and frame to
slide back and forth as they have to, using heim joints. I think you'll
be happiest with a complete repair, new ball joints and their brass
halves, that you probably did know were in there, as they wear in two
and fall out. Or, you might think about converting to hydraulic, that
works for me: http://www.----------.com/slave.jpg But, you'll loose the
helper spring.
God Bless America, ßill O|||||||O
mailto:--------------------
breyfogle wrote:
>
> Vehicle is an '83 CJ7, 258/T5.
>
> I'm getting tired of replacing the clutch linkage parts (mostly the
> bellcrack, upper and lower rods) every 4 to 5 years. A Google search found
> a company named tellico4x4 that claims to sell a heim joint clutch linkage
> assemble for CJ's that should completely eliminate the joint wear in the OEM
> linkage. Does anybody have any experience (good or bad) with either this
> company or their products ?
10-11-2004, 07:58 PM
#6
Guest
Posts: n/a
Re: CY7 Clutch Linkage
Did you notice there's a zerk fitting on that bell crank? I don't
know if you could design the joints between the engine and frame to
slide back and forth as they have to, using heim joints. I think you'll
be happiest with a complete repair, new ball joints and their brass
halves, that you probably did know were in there, as they wear in two
and fall out. Or, you might think about converting to hydraulic, that
works for me: http://www.----------.com/slave.jpg But, you'll loose the
helper spring.
God Bless America, ßill O|||||||O
mailto:--------------------
breyfogle wrote:
>
> Vehicle is an '83 CJ7, 258/T5.
>
> I'm getting tired of replacing the clutch linkage parts (mostly the
> bellcrack, upper and lower rods) every 4 to 5 years. A Google search found
> a company named tellico4x4 that claims to sell a heim joint clutch linkage
> assemble for CJ's that should completely eliminate the joint wear in the OEM
> linkage. Does anybody have any experience (good or bad) with either this
> company or their products ?
know if you could design the joints between the engine and frame to
slide back and forth as they have to, using heim joints. I think you'll
be happiest with a complete repair, new ball joints and their brass
halves, that you probably did know were in there, as they wear in two
and fall out. Or, you might think about converting to hydraulic, that
works for me: http://www.----------.com/slave.jpg But, you'll loose the
helper spring.
God Bless America, ßill O|||||||O
mailto:--------------------
breyfogle wrote:
>
> Vehicle is an '83 CJ7, 258/T5.
>
> I'm getting tired of replacing the clutch linkage parts (mostly the
> bellcrack, upper and lower rods) every 4 to 5 years. A Google search found
> a company named tellico4x4 that claims to sell a heim joint clutch linkage
> assemble for CJ's that should completely eliminate the joint wear in the OEM
> linkage. Does anybody have any experience (good or bad) with either this
> company or their products ?
10-11-2004, 07:58 PM
#7
Guest
Posts: n/a
Re: CY7 Clutch Linkage
Did you notice there's a zerk fitting on that bell crank? I don't
know if you could design the joints between the engine and frame to
slide back and forth as they have to, using heim joints. I think you'll
be happiest with a complete repair, new ball joints and their brass
halves, that you probably did know were in there, as they wear in two
and fall out. Or, you might think about converting to hydraulic, that
works for me: http://www.----------.com/slave.jpg But, you'll loose the
helper spring.
God Bless America, ßill O|||||||O
mailto:--------------------
breyfogle wrote:
>
> Vehicle is an '83 CJ7, 258/T5.
>
> I'm getting tired of replacing the clutch linkage parts (mostly the
> bellcrack, upper and lower rods) every 4 to 5 years. A Google search found
> a company named tellico4x4 that claims to sell a heim joint clutch linkage
> assemble for CJ's that should completely eliminate the joint wear in the OEM
> linkage. Does anybody have any experience (good or bad) with either this
> company or their products ?
know if you could design the joints between the engine and frame to
slide back and forth as they have to, using heim joints. I think you'll
be happiest with a complete repair, new ball joints and their brass
halves, that you probably did know were in there, as they wear in two
and fall out. Or, you might think about converting to hydraulic, that
works for me: http://www.----------.com/slave.jpg But, you'll loose the
helper spring.
God Bless America, ßill O|||||||O
mailto:--------------------
breyfogle wrote:
>
> Vehicle is an '83 CJ7, 258/T5.
>
> I'm getting tired of replacing the clutch linkage parts (mostly the
> bellcrack, upper and lower rods) every 4 to 5 years. A Google search found
> a company named tellico4x4 that claims to sell a heim joint clutch linkage
> assemble for CJ's that should completely eliminate the joint wear in the OEM
> linkage. Does anybody have any experience (good or bad) with either this
> company or their products ?
10-11-2004, 09:54 PM
#8
Guest
Posts: n/a
Re: CY7 Clutch Linkage
Jerry McG (gmcgeorge.remove@frontier.net) wrote on Monday 11 October 2004
06:54 pm:
>> I'm getting tired of replacing the clutch linkage parts (mostly the
>> bellcrack, upper and lower rods) every 4 to 5 years. A Google search
>> found a company named tellico4x4 that claims to sell a heim joint clutch
>> linkage assemble for CJ's that should completely eliminate the joint wear
>> in the OEM linkage. Does anybody have any experience (good or bad) with
>> either this
> company or their products ?>
>
> Tellico is a reputable outfit. Not sure if it's the same brand as the one
> some of the folks in our club are running on CJs, but they swear by 'em.
>>
>>
Yeah, but beware if you ever have to return a defective product to Tellico.
They never return calls (still waiting after leaving three messages and
talking to a rep twice a month and a half ago) and their web site is
usually busted, so you can't contact them via that either.
After buying about $1000 worth of stuff from them, they're now at the bottom
of my list of places to buy from. I don't care if it costs more - the only
time I'll buy from them now is if I can't find it anywhere else. This over
a $15 turn signal switch that wouldn't work in the "lane change" position.
I keep it in my Jeep as a reminder not to buy from them. I curse their
name every time I change lanes.
--
Michael White "To protect people from the effects of folly is to
fill the world with fools." -Herbert Spencer, 1891
06:54 pm:
>> I'm getting tired of replacing the clutch linkage parts (mostly the
>> bellcrack, upper and lower rods) every 4 to 5 years. A Google search
>> found a company named tellico4x4 that claims to sell a heim joint clutch
>> linkage assemble for CJ's that should completely eliminate the joint wear
>> in the OEM linkage. Does anybody have any experience (good or bad) with
>> either this
> company or their products ?>
>
> Tellico is a reputable outfit. Not sure if it's the same brand as the one
> some of the folks in our club are running on CJs, but they swear by 'em.
>>
>>
Yeah, but beware if you ever have to return a defective product to Tellico.
They never return calls (still waiting after leaving three messages and
talking to a rep twice a month and a half ago) and their web site is
usually busted, so you can't contact them via that either.
After buying about $1000 worth of stuff from them, they're now at the bottom
of my list of places to buy from. I don't care if it costs more - the only
time I'll buy from them now is if I can't find it anywhere else. This over
a $15 turn signal switch that wouldn't work in the "lane change" position.
I keep it in my Jeep as a reminder not to buy from them. I curse their
name every time I change lanes.
--
Michael White "To protect people from the effects of folly is to
fill the world with fools." -Herbert Spencer, 1891
10-11-2004, 09:54 PM
#9
Guest
Posts: n/a
Re: CY7 Clutch Linkage
Jerry McG (gmcgeorge.remove@frontier.net) wrote on Monday 11 October 2004
06:54 pm:
>> I'm getting tired of replacing the clutch linkage parts (mostly the
>> bellcrack, upper and lower rods) every 4 to 5 years. A Google search
>> found a company named tellico4x4 that claims to sell a heim joint clutch
>> linkage assemble for CJ's that should completely eliminate the joint wear
>> in the OEM linkage. Does anybody have any experience (good or bad) with
>> either this
> company or their products ?>
>
> Tellico is a reputable outfit. Not sure if it's the same brand as the one
> some of the folks in our club are running on CJs, but they swear by 'em.
>>
>>
Yeah, but beware if you ever have to return a defective product to Tellico.
They never return calls (still waiting after leaving three messages and
talking to a rep twice a month and a half ago) and their web site is
usually busted, so you can't contact them via that either.
After buying about $1000 worth of stuff from them, they're now at the bottom
of my list of places to buy from. I don't care if it costs more - the only
time I'll buy from them now is if I can't find it anywhere else. This over
a $15 turn signal switch that wouldn't work in the "lane change" position.
I keep it in my Jeep as a reminder not to buy from them. I curse their
name every time I change lanes.
--
Michael White "To protect people from the effects of folly is to
fill the world with fools." -Herbert Spencer, 1891
06:54 pm:
>> I'm getting tired of replacing the clutch linkage parts (mostly the
>> bellcrack, upper and lower rods) every 4 to 5 years. A Google search
>> found a company named tellico4x4 that claims to sell a heim joint clutch
>> linkage assemble for CJ's that should completely eliminate the joint wear
>> in the OEM linkage. Does anybody have any experience (good or bad) with
>> either this
> company or their products ?>
>
> Tellico is a reputable outfit. Not sure if it's the same brand as the one
> some of the folks in our club are running on CJs, but they swear by 'em.
>>
>>
Yeah, but beware if you ever have to return a defective product to Tellico.
They never return calls (still waiting after leaving three messages and
talking to a rep twice a month and a half ago) and their web site is
usually busted, so you can't contact them via that either.
After buying about $1000 worth of stuff from them, they're now at the bottom
of my list of places to buy from. I don't care if it costs more - the only
time I'll buy from them now is if I can't find it anywhere else. This over
a $15 turn signal switch that wouldn't work in the "lane change" position.
I keep it in my Jeep as a reminder not to buy from them. I curse their
name every time I change lanes.
--
Michael White "To protect people from the effects of folly is to
fill the world with fools." -Herbert Spencer, 1891
10-11-2004, 09:54 PM
#10
Guest
Posts: n/a
Re: CY7 Clutch Linkage
Jerry McG (gmcgeorge.remove@frontier.net) wrote on Monday 11 October 2004
06:54 pm:
>> I'm getting tired of replacing the clutch linkage parts (mostly the
>> bellcrack, upper and lower rods) every 4 to 5 years. A Google search
>> found a company named tellico4x4 that claims to sell a heim joint clutch
>> linkage assemble for CJ's that should completely eliminate the joint wear
>> in the OEM linkage. Does anybody have any experience (good or bad) with
>> either this
> company or their products ?>
>
> Tellico is a reputable outfit. Not sure if it's the same brand as the one
> some of the folks in our club are running on CJs, but they swear by 'em.
>>
>>
Yeah, but beware if you ever have to return a defective product to Tellico.
They never return calls (still waiting after leaving three messages and
talking to a rep twice a month and a half ago) and their web site is
usually busted, so you can't contact them via that either.
After buying about $1000 worth of stuff from them, they're now at the bottom
of my list of places to buy from. I don't care if it costs more - the only
time I'll buy from them now is if I can't find it anywhere else. This over
a $15 turn signal switch that wouldn't work in the "lane change" position.
I keep it in my Jeep as a reminder not to buy from them. I curse their
name every time I change lanes.
--
Michael White "To protect people from the effects of folly is to
fill the world with fools." -Herbert Spencer, 1891
06:54 pm:
>> I'm getting tired of replacing the clutch linkage parts (mostly the
>> bellcrack, upper and lower rods) every 4 to 5 years. A Google search
>> found a company named tellico4x4 that claims to sell a heim joint clutch
>> linkage assemble for CJ's that should completely eliminate the joint wear
>> in the OEM linkage. Does anybody have any experience (good or bad) with
>> either this
> company or their products ?>
>
> Tellico is a reputable outfit. Not sure if it's the same brand as the one
> some of the folks in our club are running on CJs, but they swear by 'em.
>>
>>
Yeah, but beware if you ever have to return a defective product to Tellico.
They never return calls (still waiting after leaving three messages and
talking to a rep twice a month and a half ago) and their web site is
usually busted, so you can't contact them via that either.
After buying about $1000 worth of stuff from them, they're now at the bottom
of my list of places to buy from. I don't care if it costs more - the only
time I'll buy from them now is if I can't find it anywhere else. This over
a $15 turn signal switch that wouldn't work in the "lane change" position.
I keep it in my Jeep as a reminder not to buy from them. I curse their
name every time I change lanes.
--
Michael White "To protect people from the effects of folly is to
fill the world with fools." -Herbert Spencer, 1891
