Correct Yoke for a CV Shaft on a D-300 Transfer case
10-15-2004, 12:26 AM
#1
Guest
Posts: n/a
Correct Yoke for a CV Shaft on a D-300 Transfer case
83 CJ7, Dana 300
My CV Shaft guy is telling me the correct yoke is Spicer 2-4-4061X. When I
did a search on this part I came up with references to Dana 20 transfer
cases. Are these yoke parts interchangeable or should I be using another
yoke?
Thanks for any help.
Bill
My CV Shaft guy is telling me the correct yoke is Spicer 2-4-4061X. When I
did a search on this part I came up with references to Dana 20 transfer
cases. Are these yoke parts interchangeable or should I be using another
yoke?
Thanks for any help.
Bill
10-15-2004, 01:11 AM
#2
Guest
Posts: n/a
Re: Correct Yoke for a CV Shaft on a D-300 Transfer case
Hi Bill,
Most Dana 20s are 1 1/8" ten spline, but there are smaller twenty
six spline that are the same. Might take this opportunity to upgrade to
thirty two spline:
http://www.rockcrawler.com/techrepor...line/index.asp
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
William Oliveri wrote:
>
> 83 CJ7, Dana 300
>
> My CV Shaft guy is telling me the correct yoke is Spicer 2-4-4061X. When I
> did a search on this part I came up with references to Dana 20 transfer
> cases. Are these yoke parts interchangeable or should I be using another
> yoke?
>
> Thanks for any help.
>
> Bill
Most Dana 20s are 1 1/8" ten spline, but there are smaller twenty
six spline that are the same. Might take this opportunity to upgrade to
thirty two spline:
http://www.rockcrawler.com/techrepor...line/index.asp
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
William Oliveri wrote:
>
> 83 CJ7, Dana 300
>
> My CV Shaft guy is telling me the correct yoke is Spicer 2-4-4061X. When I
> did a search on this part I came up with references to Dana 20 transfer
> cases. Are these yoke parts interchangeable or should I be using another
> yoke?
>
> Thanks for any help.
>
> Bill
10-15-2004, 01:11 AM
#3
Guest
Posts: n/a
Re: Correct Yoke for a CV Shaft on a D-300 Transfer case
Hi Bill,
Most Dana 20s are 1 1/8" ten spline, but there are smaller twenty
six spline that are the same. Might take this opportunity to upgrade to
thirty two spline:
http://www.rockcrawler.com/techrepor...line/index.asp
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
William Oliveri wrote:
>
> 83 CJ7, Dana 300
>
> My CV Shaft guy is telling me the correct yoke is Spicer 2-4-4061X. When I
> did a search on this part I came up with references to Dana 20 transfer
> cases. Are these yoke parts interchangeable or should I be using another
> yoke?
>
> Thanks for any help.
>
> Bill
Most Dana 20s are 1 1/8" ten spline, but there are smaller twenty
six spline that are the same. Might take this opportunity to upgrade to
thirty two spline:
http://www.rockcrawler.com/techrepor...line/index.asp
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
William Oliveri wrote:
>
> 83 CJ7, Dana 300
>
> My CV Shaft guy is telling me the correct yoke is Spicer 2-4-4061X. When I
> did a search on this part I came up with references to Dana 20 transfer
> cases. Are these yoke parts interchangeable or should I be using another
> yoke?
>
> Thanks for any help.
>
> Bill
10-15-2004, 01:11 AM
#4
Guest
Posts: n/a
Re: Correct Yoke for a CV Shaft on a D-300 Transfer case
Hi Bill,
Most Dana 20s are 1 1/8" ten spline, but there are smaller twenty
six spline that are the same. Might take this opportunity to upgrade to
thirty two spline:
http://www.rockcrawler.com/techrepor...line/index.asp
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
William Oliveri wrote:
>
> 83 CJ7, Dana 300
>
> My CV Shaft guy is telling me the correct yoke is Spicer 2-4-4061X. When I
> did a search on this part I came up with references to Dana 20 transfer
> cases. Are these yoke parts interchangeable or should I be using another
> yoke?
>
> Thanks for any help.
>
> Bill
Most Dana 20s are 1 1/8" ten spline, but there are smaller twenty
six spline that are the same. Might take this opportunity to upgrade to
thirty two spline:
http://www.rockcrawler.com/techrepor...line/index.asp
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
William Oliveri wrote:
>
> 83 CJ7, Dana 300
>
> My CV Shaft guy is telling me the correct yoke is Spicer 2-4-4061X. When I
> did a search on this part I came up with references to Dana 20 transfer
> cases. Are these yoke parts interchangeable or should I be using another
> yoke?
>
> Thanks for any help.
>
> Bill
10-18-2004, 09:10 PM
#5
Guest
Posts: n/a
Re: Correct Yoke for a CV Shaft on a D-300 Transfer case
I took the front output yoke off a Quadra-Trac (i think it was the front) and
it slipped right on the rear of my Dana 300. A front XJ Cherokee driveshaft
bolted right up and was the right length on the back my CJ8.
Don W
it slipped right on the rear of my Dana 300. A front XJ Cherokee driveshaft
bolted right up and was the right length on the back my CJ8.
Don W
10-18-2004, 09:10 PM
#6
Guest
Posts: n/a
Re: Correct Yoke for a CV Shaft on a D-300 Transfer case
I took the front output yoke off a Quadra-Trac (i think it was the front) and
it slipped right on the rear of my Dana 300. A front XJ Cherokee driveshaft
bolted right up and was the right length on the back my CJ8.
Don W
it slipped right on the rear of my Dana 300. A front XJ Cherokee driveshaft
bolted right up and was the right length on the back my CJ8.
Don W
10-18-2004, 09:10 PM
#7
Guest
Posts: n/a
Re: Correct Yoke for a CV Shaft on a D-300 Transfer case
I took the front output yoke off a Quadra-Trac (i think it was the front) and
it slipped right on the rear of my Dana 300. A front XJ Cherokee driveshaft
bolted right up and was the right length on the back my CJ8.
Don W
it slipped right on the rear of my Dana 300. A front XJ Cherokee driveshaft
bolted right up and was the right length on the back my CJ8.
Don W
Thread
Thread Starter
Forum
Replies
Last Post
Michael Vincenty
Jeep Mailing List
0
08-16-2003 10:16 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
