clearing MIL codes
12-08-2007, 08:16 AM
#1
Guest
Posts: n/a
clearing MIL codes
My MIL 'flashed' 3 codes one for Alternator, one for temp and one for power
loss because of my serpentine belt breaking. Everything is fixed. Will it
clear itself w/o disconnecting battery? Is there some other way, like
turning the ignition on/off 50 times?
tia,
Mel P. - Cherokee 4.0 L
loss because of my serpentine belt breaking. Everything is fixed. Will it
clear itself w/o disconnecting battery? Is there some other way, like
turning the ignition on/off 50 times?
tia,
Mel P. - Cherokee 4.0 L
12-08-2007, 11:55 AM
#2
Guest
Posts: n/a
Re: clearing MIL codes
it will take about 50 key cycles before it does
"Mel P." wrote:
> My MIL 'flashed' 3 codes one for Alternator, one for temp and one for power
> loss because of my serpentine belt breaking. Everything is fixed. Will it
> clear itself w/o disconnecting battery? Is there some other way, like
> turning the ignition on/off 50 times?
>
> tia,
>
> Mel P. - Cherokee 4.0 L
"Mel P." wrote:
> My MIL 'flashed' 3 codes one for Alternator, one for temp and one for power
> loss because of my serpentine belt breaking. Everything is fixed. Will it
> clear itself w/o disconnecting battery? Is there some other way, like
> turning the ignition on/off 50 times?
>
> tia,
>
> Mel P. - Cherokee 4.0 L
12-08-2007, 11:55 AM
#3
Guest
Posts: n/a
Re: clearing MIL codes
it will take about 50 key cycles before it does
"Mel P." wrote:
> My MIL 'flashed' 3 codes one for Alternator, one for temp and one for power
> loss because of my serpentine belt breaking. Everything is fixed. Will it
> clear itself w/o disconnecting battery? Is there some other way, like
> turning the ignition on/off 50 times?
>
> tia,
>
> Mel P. - Cherokee 4.0 L
"Mel P." wrote:
> My MIL 'flashed' 3 codes one for Alternator, one for temp and one for power
> loss because of my serpentine belt breaking. Everything is fixed. Will it
> clear itself w/o disconnecting battery? Is there some other way, like
> turning the ignition on/off 50 times?
>
> tia,
>
> Mel P. - Cherokee 4.0 L
12-08-2007, 01:58 PM
#4
Guest
Posts: n/a
Re: clearing MIL codes
philthy wrote:
> it will take about 50 key cycles before it does
Easier just to disconnect the battery for a while and
use that time to clean the battery terminals.
> "Mel P." wrote:
>> My MIL 'flashed' 3 codes one for Alternator, one for temp and one
>> for power loss because of my serpentine belt breaking. Everything
>> is fixed. Will it clear itself w/o disconnecting battery? Is there
>> some other way, like turning the ignition on/off 50 times?
> it will take about 50 key cycles before it does
Easier just to disconnect the battery for a while and
use that time to clean the battery terminals.
> "Mel P." wrote:
>> My MIL 'flashed' 3 codes one for Alternator, one for temp and one
>> for power loss because of my serpentine belt breaking. Everything
>> is fixed. Will it clear itself w/o disconnecting battery? Is there
>> some other way, like turning the ignition on/off 50 times?
12-08-2007, 01:58 PM
#5
Guest
Posts: n/a
Re: clearing MIL codes
philthy wrote:
> it will take about 50 key cycles before it does
Easier just to disconnect the battery for a while and
use that time to clean the battery terminals.
> "Mel P." wrote:
>> My MIL 'flashed' 3 codes one for Alternator, one for temp and one
>> for power loss because of my serpentine belt breaking. Everything
>> is fixed. Will it clear itself w/o disconnecting battery? Is there
>> some other way, like turning the ignition on/off 50 times?
> it will take about 50 key cycles before it does
Easier just to disconnect the battery for a while and
use that time to clean the battery terminals.
> "Mel P." wrote:
>> My MIL 'flashed' 3 codes one for Alternator, one for temp and one
>> for power loss because of my serpentine belt breaking. Everything
>> is fixed. Will it clear itself w/o disconnecting battery? Is there
>> some other way, like turning the ignition on/off 50 times?
12-08-2007, 02:11 PM
#6
Guest
Posts: n/a
Re: clearing MIL codes
Write down favorite radio frequencies first.
Cheers,
Earle
"DougW" <I.only.read.usenet@invalid.address> wrote in message
news:8PB6j.219$Wt7.197@newsfe14.phx...
> philthy wrote:
> > it will take about 50 key cycles before it does
>
> Easier just to disconnect the battery for a while and
> use that time to clean the battery terminals.
>
> > "Mel P." wrote:
> >> My MIL 'flashed' 3 codes one for Alternator, one for temp and one
> >> for power loss because of my serpentine belt breaking. Everything
> >> is fixed. Will it clear itself w/o disconnecting battery? Is
there
> >> some other way, like turning the ignition on/off 50 times?
>
>
--
Posted via a free Usenet account from http://www.teranews.com
Cheers,
Earle
"DougW" <I.only.read.usenet@invalid.address> wrote in message
news:8PB6j.219$Wt7.197@newsfe14.phx...
> philthy wrote:
> > it will take about 50 key cycles before it does
>
> Easier just to disconnect the battery for a while and
> use that time to clean the battery terminals.
>
> > "Mel P." wrote:
> >> My MIL 'flashed' 3 codes one for Alternator, one for temp and one
> >> for power loss because of my serpentine belt breaking. Everything
> >> is fixed. Will it clear itself w/o disconnecting battery? Is
there
> >> some other way, like turning the ignition on/off 50 times?
>
>
--
Posted via a free Usenet account from http://www.teranews.com
12-08-2007, 02:11 PM
#7
Guest
Posts: n/a
Re: clearing MIL codes
Write down favorite radio frequencies first.
Cheers,
Earle
"DougW" <I.only.read.usenet@invalid.address> wrote in message
news:8PB6j.219$Wt7.197@newsfe14.phx...
> philthy wrote:
> > it will take about 50 key cycles before it does
>
> Easier just to disconnect the battery for a while and
> use that time to clean the battery terminals.
>
> > "Mel P." wrote:
> >> My MIL 'flashed' 3 codes one for Alternator, one for temp and one
> >> for power loss because of my serpentine belt breaking. Everything
> >> is fixed. Will it clear itself w/o disconnecting battery? Is
there
> >> some other way, like turning the ignition on/off 50 times?
>
>
--
Posted via a free Usenet account from http://www.teranews.com
Cheers,
Earle
"DougW" <I.only.read.usenet@invalid.address> wrote in message
news:8PB6j.219$Wt7.197@newsfe14.phx...
> philthy wrote:
> > it will take about 50 key cycles before it does
>
> Easier just to disconnect the battery for a while and
> use that time to clean the battery terminals.
>
> > "Mel P." wrote:
> >> My MIL 'flashed' 3 codes one for Alternator, one for temp and one
> >> for power loss because of my serpentine belt breaking. Everything
> >> is fixed. Will it clear itself w/o disconnecting battery? Is
there
> >> some other way, like turning the ignition on/off 50 times?
>
>
--
Posted via a free Usenet account from http://www.teranews.com
Thread
Thread Starter
Forum
Replies
Last Post
joe@dokes.com
Jeep Mailing List
16
06-06-2004 09:10 AM
Brian French
Jeep Mailing List
15
03-04-2004 02:33 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
