clearing MIL codes
 

My MIL 'flashed' 3 codes one for Alternator, one for temp and one for power
loss because of my serpentine belt breaking. Everything is fixed. Will it
clear itself w/o disconnecting battery? Is there some other way, like
turning the ignition on/off 50 times?

tia,

Mel P. - Cherokee 4.0 L

Re: clearing MIL codes
 

it will take about 50 key cycles before it does

"Mel P." wrote:

> My MIL 'flashed' 3 codes one for Alternator, one for temp and one for power
> loss because of my serpentine belt breaking. Everything is fixed. Will it
> clear itself w/o disconnecting battery? Is there some other way, like
> turning the ignition on/off 50 times?
>
> tia,
>
> Mel P. - Cherokee 4.0 L

Re: clearing MIL codes
 

it will take about 50 key cycles before it does

"Mel P." wrote:

> My MIL 'flashed' 3 codes one for Alternator, one for temp and one for power
> loss because of my serpentine belt breaking. Everything is fixed. Will it
> clear itself w/o disconnecting battery? Is there some other way, like
> turning the ignition on/off 50 times?
>
> tia,
>
> Mel P. - Cherokee 4.0 L

Re: clearing MIL codes
 

philthy wrote:
> it will take about 50 key cycles before it does

Easier just to disconnect the battery for a while and
use that time to clean the battery terminals.

> "Mel P." wrote:
>> My MIL 'flashed' 3 codes one for Alternator, one for temp and one
>> for power loss because of my serpentine belt breaking. Everything
>> is fixed. Will it clear itself w/o disconnecting battery? Is there
>> some other way, like turning the ignition on/off 50 times?

Re: clearing MIL codes
 

philthy wrote:
> it will take about 50 key cycles before it does

Easier just to disconnect the battery for a while and
use that time to clean the battery terminals.

> "Mel P." wrote:
>> My MIL 'flashed' 3 codes one for Alternator, one for temp and one
>> for power loss because of my serpentine belt breaking. Everything
>> is fixed. Will it clear itself w/o disconnecting battery? Is there
>> some other way, like turning the ignition on/off 50 times?

Re: clearing MIL codes
 

Write down favorite radio frequencies first.

Cheers,

Earle

"DougW" <I.only.read.usenet@invalid.address> wrote in message
news:8PB6j.219$Wt7.197@newsfe14.phx...
> philthy wrote:
> > it will take about 50 key cycles before it does
>
> Easier just to disconnect the battery for a while and
> use that time to clean the battery terminals.
>
> > "Mel P." wrote:
> >> My MIL 'flashed' 3 codes one for Alternator, one for temp and one
> >> for power loss because of my serpentine belt breaking. Everything
> >> is fixed. Will it clear itself w/o disconnecting battery? Is
there
> >> some other way, like turning the ignition on/off 50 times?
>
>



--
Posted via a free Usenet account from http://www.teranews.com

Re: clearing MIL codes
 

Write down favorite radio frequencies first.

Cheers,

Earle

"DougW" <I.only.read.usenet@invalid.address> wrote in message
news:8PB6j.219$Wt7.197@newsfe14.phx...
> philthy wrote:
> > it will take about 50 key cycles before it does
>
> Easier just to disconnect the battery for a while and
> use that time to clean the battery terminals.
>
> > "Mel P." wrote:
> >> My MIL 'flashed' 3 codes one for Alternator, one for temp and one
> >> for power loss because of my serpentine belt breaking. Everything
> >> is fixed. Will it clear itself w/o disconnecting battery? Is
there
> >> some other way, like turning the ignition on/off 50 times?
>
>



--
Posted via a free Usenet account from http://www.teranews.com