CJ wiper switch hot wire(s)
10-28-2003, 09:33 PM
#2
Guest
Posts: n/a
Re: CJ wiper switch hot wire(s)
Almost no one else can either, that's why it's nearly impossible to
find a Real Jeep with the windshield wipers set to return to the start
position when shut off. But, there's just one hot one going from the
ignition switch to the wippers. So it's just trail and error, until you
find the right one for the right speed. Many of us once we figure it
out, splice in a trailer pig tail connection, so we may easily take the
windshield off during play, not have to worry if it's going to rain
going home: http://www.----------.com/v6jeepwire.jpg
God Bless America, ßill O|||||||O
mailto:--------------------
ABanks5@columbus.rr.com wrote:
>
> Without having to remove the dash, I can't seem to locate the wires running
> up to the wiper switch (bought mine disconnected). Can anyone tell me where
> these come from and what types of ends are on them?
> Thanks
> 83 CJ7
find a Real Jeep with the windshield wipers set to return to the start
position when shut off. But, there's just one hot one going from the
ignition switch to the wippers. So it's just trail and error, until you
find the right one for the right speed. Many of us once we figure it
out, splice in a trailer pig tail connection, so we may easily take the
windshield off during play, not have to worry if it's going to rain
going home: http://www.----------.com/v6jeepwire.jpg
God Bless America, ßill O|||||||O
mailto:--------------------
ABanks5@columbus.rr.com wrote:
>
> Without having to remove the dash, I can't seem to locate the wires running
> up to the wiper switch (bought mine disconnected). Can anyone tell me where
> these come from and what types of ends are on them?
> Thanks
> 83 CJ7
10-28-2003, 09:33 PM
#3
Guest
Posts: n/a
Re: CJ wiper switch hot wire(s)
Almost no one else can either, that's why it's nearly impossible to
find a Real Jeep with the windshield wipers set to return to the start
position when shut off. But, there's just one hot one going from the
ignition switch to the wippers. So it's just trail and error, until you
find the right one for the right speed. Many of us once we figure it
out, splice in a trailer pig tail connection, so we may easily take the
windshield off during play, not have to worry if it's going to rain
going home: http://www.----------.com/v6jeepwire.jpg
God Bless America, ßill O|||||||O
mailto:--------------------
ABanks5@columbus.rr.com wrote:
>
> Without having to remove the dash, I can't seem to locate the wires running
> up to the wiper switch (bought mine disconnected). Can anyone tell me where
> these come from and what types of ends are on them?
> Thanks
> 83 CJ7
find a Real Jeep with the windshield wipers set to return to the start
position when shut off. But, there's just one hot one going from the
ignition switch to the wippers. So it's just trail and error, until you
find the right one for the right speed. Many of us once we figure it
out, splice in a trailer pig tail connection, so we may easily take the
windshield off during play, not have to worry if it's going to rain
going home: http://www.----------.com/v6jeepwire.jpg
God Bless America, ßill O|||||||O
mailto:--------------------
ABanks5@columbus.rr.com wrote:
>
> Without having to remove the dash, I can't seem to locate the wires running
> up to the wiper switch (bought mine disconnected). Can anyone tell me where
> these come from and what types of ends are on them?
> Thanks
> 83 CJ7
10-28-2003, 09:33 PM
#4
Guest
Posts: n/a
Re: CJ wiper switch hot wire(s)
Almost no one else can either, that's why it's nearly impossible to
find a Real Jeep with the windshield wipers set to return to the start
position when shut off. But, there's just one hot one going from the
ignition switch to the wippers. So it's just trail and error, until you
find the right one for the right speed. Many of us once we figure it
out, splice in a trailer pig tail connection, so we may easily take the
windshield off during play, not have to worry if it's going to rain
going home: http://www.----------.com/v6jeepwire.jpg
God Bless America, ßill O|||||||O
mailto:--------------------
ABanks5@columbus.rr.com wrote:
>
> Without having to remove the dash, I can't seem to locate the wires running
> up to the wiper switch (bought mine disconnected). Can anyone tell me where
> these come from and what types of ends are on them?
> Thanks
> 83 CJ7
find a Real Jeep with the windshield wipers set to return to the start
position when shut off. But, there's just one hot one going from the
ignition switch to the wippers. So it's just trail and error, until you
find the right one for the right speed. Many of us once we figure it
out, splice in a trailer pig tail connection, so we may easily take the
windshield off during play, not have to worry if it's going to rain
going home: http://www.----------.com/v6jeepwire.jpg
God Bless America, ßill O|||||||O
mailto:--------------------
ABanks5@columbus.rr.com wrote:
>
> Without having to remove the dash, I can't seem to locate the wires running
> up to the wiper switch (bought mine disconnected). Can anyone tell me where
> these come from and what types of ends are on them?
> Thanks
> 83 CJ7
10-28-2003, 10:52 PM
#5
Guest
Posts: n/a
Re: CJ wiper switch hot wire(s)
There should be a three prong white connector from the dash harness
(probably hanging loose) that goes to the three poles on the dash switch.
<ABanks5@columbus.rr.com> wrote in message
news:%KEnb.92064$uJ2.30840@fe3.columbus.rr.com...
> Without having to remove the dash, I can't seem to locate the wires
running
> up to the wiper switch (bought mine disconnected). Can anyone tell me
where
> these come from and what types of ends are on them?
> Thanks
> 83 CJ7
>
>
(probably hanging loose) that goes to the three poles on the dash switch.
<ABanks5@columbus.rr.com> wrote in message
news:%KEnb.92064$uJ2.30840@fe3.columbus.rr.com...
> Without having to remove the dash, I can't seem to locate the wires
running
> up to the wiper switch (bought mine disconnected). Can anyone tell me
where
> these come from and what types of ends are on them?
> Thanks
> 83 CJ7
>
>
10-28-2003, 10:52 PM
#6
Guest
Posts: n/a
Re: CJ wiper switch hot wire(s)
There should be a three prong white connector from the dash harness
(probably hanging loose) that goes to the three poles on the dash switch.
<ABanks5@columbus.rr.com> wrote in message
news:%KEnb.92064$uJ2.30840@fe3.columbus.rr.com...
> Without having to remove the dash, I can't seem to locate the wires
running
> up to the wiper switch (bought mine disconnected). Can anyone tell me
where
> these come from and what types of ends are on them?
> Thanks
> 83 CJ7
>
>
(probably hanging loose) that goes to the three poles on the dash switch.
<ABanks5@columbus.rr.com> wrote in message
news:%KEnb.92064$uJ2.30840@fe3.columbus.rr.com...
> Without having to remove the dash, I can't seem to locate the wires
running
> up to the wiper switch (bought mine disconnected). Can anyone tell me
where
> these come from and what types of ends are on them?
> Thanks
> 83 CJ7
>
>
10-28-2003, 10:52 PM
#7
Guest
Posts: n/a
Re: CJ wiper switch hot wire(s)
There should be a three prong white connector from the dash harness
(probably hanging loose) that goes to the three poles on the dash switch.
<ABanks5@columbus.rr.com> wrote in message
news:%KEnb.92064$uJ2.30840@fe3.columbus.rr.com...
> Without having to remove the dash, I can't seem to locate the wires
running
> up to the wiper switch (bought mine disconnected). Can anyone tell me
where
> these come from and what types of ends are on them?
> Thanks
> 83 CJ7
>
>
(probably hanging loose) that goes to the three poles on the dash switch.
<ABanks5@columbus.rr.com> wrote in message
news:%KEnb.92064$uJ2.30840@fe3.columbus.rr.com...
> Without having to remove the dash, I can't seem to locate the wires
running
> up to the wiper switch (bought mine disconnected). Can anyone tell me
where
> these come from and what types of ends are on them?
> Thanks
> 83 CJ7
>
>
10-29-2003, 05:25 AM
#8
Guest
Posts: n/a
Re: CJ wiper switch hot wire(s)
Excellent! Thanks Gerald!
Allen
"Gerald G. McGeorge" <gmcgeorge@frontier.net> wrote in message
news:bnndnr02od3@enews4.newsguy.com...
> There should be a three prong white connector from the dash harness
> (probably hanging loose) that goes to the three poles on the dash switch.
>
>
> <ABanks5@columbus.rr.com> wrote in message
> news:%KEnb.92064$uJ2.30840@fe3.columbus.rr.com...
> > Without having to remove the dash, I can't seem to locate the wires
> running
> > up to the wiper switch (bought mine disconnected). Can anyone tell me
> where
> > these come from and what types of ends are on them?
> > Thanks
> > 83 CJ7
> >
> >
>
>
Allen
"Gerald G. McGeorge" <gmcgeorge@frontier.net> wrote in message
news:bnndnr02od3@enews4.newsguy.com...
> There should be a three prong white connector from the dash harness
> (probably hanging loose) that goes to the three poles on the dash switch.
>
>
> <ABanks5@columbus.rr.com> wrote in message
> news:%KEnb.92064$uJ2.30840@fe3.columbus.rr.com...
> > Without having to remove the dash, I can't seem to locate the wires
> running
> > up to the wiper switch (bought mine disconnected). Can anyone tell me
> where
> > these come from and what types of ends are on them?
> > Thanks
> > 83 CJ7
> >
> >
>
>
10-29-2003, 05:25 AM
#9
Guest
Posts: n/a
Re: CJ wiper switch hot wire(s)
Excellent! Thanks Gerald!
Allen
"Gerald G. McGeorge" <gmcgeorge@frontier.net> wrote in message
news:bnndnr02od3@enews4.newsguy.com...
> There should be a three prong white connector from the dash harness
> (probably hanging loose) that goes to the three poles on the dash switch.
>
>
> <ABanks5@columbus.rr.com> wrote in message
> news:%KEnb.92064$uJ2.30840@fe3.columbus.rr.com...
> > Without having to remove the dash, I can't seem to locate the wires
> running
> > up to the wiper switch (bought mine disconnected). Can anyone tell me
> where
> > these come from and what types of ends are on them?
> > Thanks
> > 83 CJ7
> >
> >
>
>
Allen
"Gerald G. McGeorge" <gmcgeorge@frontier.net> wrote in message
news:bnndnr02od3@enews4.newsguy.com...
> There should be a three prong white connector from the dash harness
> (probably hanging loose) that goes to the three poles on the dash switch.
>
>
> <ABanks5@columbus.rr.com> wrote in message
> news:%KEnb.92064$uJ2.30840@fe3.columbus.rr.com...
> > Without having to remove the dash, I can't seem to locate the wires
> running
> > up to the wiper switch (bought mine disconnected). Can anyone tell me
> where
> > these come from and what types of ends are on them?
> > Thanks
> > 83 CJ7
> >
> >
>
>
10-29-2003, 05:25 AM
#10
Guest
Posts: n/a
Re: CJ wiper switch hot wire(s)
Excellent! Thanks Gerald!
Allen
"Gerald G. McGeorge" <gmcgeorge@frontier.net> wrote in message
news:bnndnr02od3@enews4.newsguy.com...
> There should be a three prong white connector from the dash harness
> (probably hanging loose) that goes to the three poles on the dash switch.
>
>
> <ABanks5@columbus.rr.com> wrote in message
> news:%KEnb.92064$uJ2.30840@fe3.columbus.rr.com...
> > Without having to remove the dash, I can't seem to locate the wires
> running
> > up to the wiper switch (bought mine disconnected). Can anyone tell me
> where
> > these come from and what types of ends are on them?
> > Thanks
> > 83 CJ7
> >
> >
>
>
Allen
"Gerald G. McGeorge" <gmcgeorge@frontier.net> wrote in message
news:bnndnr02od3@enews4.newsguy.com...
> There should be a three prong white connector from the dash harness
> (probably hanging loose) that goes to the three poles on the dash switch.
>
>
> <ABanks5@columbus.rr.com> wrote in message
> news:%KEnb.92064$uJ2.30840@fe3.columbus.rr.com...
> > Without having to remove the dash, I can't seem to locate the wires
> running
> > up to the wiper switch (bought mine disconnected). Can anyone tell me
> where
> > these come from and what types of ends are on them?
> > Thanks
> > 83 CJ7
> >
> >
>
>
