CJ/ M38 body on shortened Toyota PU frame
02-21-2005, 11:03 PM
#2
Guest
Posts: n/a
Re: CJ/ M38 body on shortened Toyota PU frame
My thoughts are value.... If you have a solid body for either, they are
worth a bunch in stock shape... When you modify you kill the value.
Maybe someone makes a 'glass tub and front like they do for the CJ's so
you can just go that route.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
brayhaven wrote:
>
> I've had an urge to put a CJ 3a or M38 body on a shortened Toyota
> pickup 4X4 frame & drive train. Anyone seen one or done such a thing?
> Just wondering about the pitfalls.. Thanks for any input.
> Greg
worth a bunch in stock shape... When you modify you kill the value.
Maybe someone makes a 'glass tub and front like they do for the CJ's so
you can just go that route.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
brayhaven wrote:
>
> I've had an urge to put a CJ 3a or M38 body on a shortened Toyota
> pickup 4X4 frame & drive train. Anyone seen one or done such a thing?
> Just wondering about the pitfalls.. Thanks for any input.
> Greg
02-21-2005, 11:03 PM
#3
Guest
Posts: n/a
Re: CJ/ M38 body on shortened Toyota PU frame
My thoughts are value.... If you have a solid body for either, they are
worth a bunch in stock shape... When you modify you kill the value.
Maybe someone makes a 'glass tub and front like they do for the CJ's so
you can just go that route.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
brayhaven wrote:
>
> I've had an urge to put a CJ 3a or M38 body on a shortened Toyota
> pickup 4X4 frame & drive train. Anyone seen one or done such a thing?
> Just wondering about the pitfalls.. Thanks for any input.
> Greg
worth a bunch in stock shape... When you modify you kill the value.
Maybe someone makes a 'glass tub and front like they do for the CJ's so
you can just go that route.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
brayhaven wrote:
>
> I've had an urge to put a CJ 3a or M38 body on a shortened Toyota
> pickup 4X4 frame & drive train. Anyone seen one or done such a thing?
> Just wondering about the pitfalls.. Thanks for any input.
> Greg
02-21-2005, 11:03 PM
#4
Guest
Posts: n/a
Re: CJ/ M38 body on shortened Toyota PU frame
My thoughts are value.... If you have a solid body for either, they are
worth a bunch in stock shape... When you modify you kill the value.
Maybe someone makes a 'glass tub and front like they do for the CJ's so
you can just go that route.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
brayhaven wrote:
>
> I've had an urge to put a CJ 3a or M38 body on a shortened Toyota
> pickup 4X4 frame & drive train. Anyone seen one or done such a thing?
> Just wondering about the pitfalls.. Thanks for any input.
> Greg
worth a bunch in stock shape... When you modify you kill the value.
Maybe someone makes a 'glass tub and front like they do for the CJ's so
you can just go that route.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
brayhaven wrote:
>
> I've had an urge to put a CJ 3a or M38 body on a shortened Toyota
> pickup 4X4 frame & drive train. Anyone seen one or done such a thing?
> Just wondering about the pitfalls.. Thanks for any input.
> Greg
02-22-2005, 04:48 AM
#5
Guest
Posts: n/a
Re: CJ/ M38 body on shortened Toyota PU frame
brayhaven wrote:
> I've had an urge to put a CJ 3a or M38 body on a shortened Toyota
> pickup 4X4 frame & drive train. Anyone seen one or done such a
thing?
> Just wondering about the pitfalls.. Thanks for any input.
> Greg
WHY?!?!
02-22-2005, 04:48 AM
#6
Guest
Posts: n/a
Re: CJ/ M38 body on shortened Toyota PU frame
brayhaven wrote:
> I've had an urge to put a CJ 3a or M38 body on a shortened Toyota
> pickup 4X4 frame & drive train. Anyone seen one or done such a
thing?
> Just wondering about the pitfalls.. Thanks for any input.
> Greg
WHY?!?!
02-22-2005, 04:48 AM
#7
Guest
Posts: n/a
Re: CJ/ M38 body on shortened Toyota PU frame
brayhaven wrote:
> I've had an urge to put a CJ 3a or M38 body on a shortened Toyota
> pickup 4X4 frame & drive train. Anyone seen one or done such a
thing?
> Just wondering about the pitfalls.. Thanks for any input.
> Greg
WHY?!?!
02-22-2005, 07:53 AM
#8
Guest
Posts: n/a
Re: CJ/ M38 body on shortened Toyota PU frame
Why? Parts availability, drivability, ease of maintenance, weight,
dependability, ... and probably most of all.... Why not :o) ?
Got my first jeep in '66 & have had a bunch since then. Have done a few
jeep conversions that I liked too. There are a lot of things I don't
like about the engine, drive train, handling and suspension (of the
M38/CJ2&3), that are much better in the toyota. But, I always loved
the looks of early jeeps. I was planning to use an aftermarket body
(glass or steel) so I'm not worried about value. Also, I'd probably
keep it forever, so my heirs can worry about that :o).
Greg
dependability, ... and probably most of all.... Why not :o) ?
Got my first jeep in '66 & have had a bunch since then. Have done a few
jeep conversions that I liked too. There are a lot of things I don't
like about the engine, drive train, handling and suspension (of the
M38/CJ2&3), that are much better in the toyota. But, I always loved
the looks of early jeeps. I was planning to use an aftermarket body
(glass or steel) so I'm not worried about value. Also, I'd probably
keep it forever, so my heirs can worry about that :o).
Greg
02-22-2005, 07:53 AM
#9
Guest
Posts: n/a
Re: CJ/ M38 body on shortened Toyota PU frame
Why? Parts availability, drivability, ease of maintenance, weight,
dependability, ... and probably most of all.... Why not :o) ?
Got my first jeep in '66 & have had a bunch since then. Have done a few
jeep conversions that I liked too. There are a lot of things I don't
like about the engine, drive train, handling and suspension (of the
M38/CJ2&3), that are much better in the toyota. But, I always loved
the looks of early jeeps. I was planning to use an aftermarket body
(glass or steel) so I'm not worried about value. Also, I'd probably
keep it forever, so my heirs can worry about that :o).
Greg
dependability, ... and probably most of all.... Why not :o) ?
Got my first jeep in '66 & have had a bunch since then. Have done a few
jeep conversions that I liked too. There are a lot of things I don't
like about the engine, drive train, handling and suspension (of the
M38/CJ2&3), that are much better in the toyota. But, I always loved
the looks of early jeeps. I was planning to use an aftermarket body
(glass or steel) so I'm not worried about value. Also, I'd probably
keep it forever, so my heirs can worry about that :o).
Greg
02-22-2005, 07:53 AM
#10
Guest
Posts: n/a
Re: CJ/ M38 body on shortened Toyota PU frame
Why? Parts availability, drivability, ease of maintenance, weight,
dependability, ... and probably most of all.... Why not :o) ?
Got my first jeep in '66 & have had a bunch since then. Have done a few
jeep conversions that I liked too. There are a lot of things I don't
like about the engine, drive train, handling and suspension (of the
M38/CJ2&3), that are much better in the toyota. But, I always loved
the looks of early jeeps. I was planning to use an aftermarket body
(glass or steel) so I'm not worried about value. Also, I'd probably
keep it forever, so my heirs can worry about that :o).
Greg
dependability, ... and probably most of all.... Why not :o) ?
Got my first jeep in '66 & have had a bunch since then. Have done a few
jeep conversions that I liked too. There are a lot of things I don't
like about the engine, drive train, handling and suspension (of the
M38/CJ2&3), that are much better in the toyota. But, I always loved
the looks of early jeeps. I was planning to use an aftermarket body
(glass or steel) so I'm not worried about value. Also, I'd probably
keep it forever, so my heirs can worry about that :o).
Greg
