CJ-7 Spring Over
Guest
Posts: n/a
Re: CJ-7 Spring Over
Jim, Thanks. I was wondering if I forgot anything. Doesn't look like it.
T
JimG wrote:
> First off you should be aware of what all that involves:.
> Spring perches
> u-bolts
> shock mounts
> shocks
> brake lines
> e-brake cables
> drive shaft length
> pinion angle
> belly pan spacers
> sway bar disconnects
> pitman arm
> welding/cutting
>
> and about $700
> I went ahead and did spring bushings also.
> Maybe you are already aware of this list, but let's start here...
>
T
JimG wrote:
> First off you should be aware of what all that involves:.
> Spring perches
> u-bolts
> shock mounts
> shocks
> brake lines
> e-brake cables
> drive shaft length
> pinion angle
> belly pan spacers
> sway bar disconnects
> pitman arm
> welding/cutting
>
> and about $700
> I went ahead and did spring bushings also.
> Maybe you are already aware of this list, but let's start here...
>
Guest
Posts: n/a
Re: CJ-7 Spring Over
Jim, Thanks. I was wondering if I forgot anything. Doesn't look like it.
T
JimG wrote:
> First off you should be aware of what all that involves:.
> Spring perches
> u-bolts
> shock mounts
> shocks
> brake lines
> e-brake cables
> drive shaft length
> pinion angle
> belly pan spacers
> sway bar disconnects
> pitman arm
> welding/cutting
>
> and about $700
> I went ahead and did spring bushings also.
> Maybe you are already aware of this list, but let's start here...
>
T
JimG wrote:
> First off you should be aware of what all that involves:.
> Spring perches
> u-bolts
> shock mounts
> shocks
> brake lines
> e-brake cables
> drive shaft length
> pinion angle
> belly pan spacers
> sway bar disconnects
> pitman arm
> welding/cutting
>
> and about $700
> I went ahead and did spring bushings also.
> Maybe you are already aware of this list, but let's start here...
>
Guest
Posts: n/a
Re: CJ-7 Spring Over
1. Do any other swaps (tranny, T/C, etc) that you have planned at the same
time. Cause you're probably gonna have to have your drivshafts re-done. I
had to have both of mine re-done, and now I'm doing a tub swap with tranny
swap (TF727) and I'm afraid I might have to have my rear driveshaft
shortened about back to where it was originally because of the added length
in my new tranny.
2. You don't HAVE to buy the expensive extended braided steel brake lines.
http://www.4x4wire.com/jeep/tech/brakes/brakehoses/
3. Cheap and easy extended front shock mounts
http://www.4x4wire.com/jeep/tech/susp/cj_shock_ext/
"T" <jeep_82usa@yahoo.com> wrote in message
news:ArnPb.54192$zs4.19798@fed1read01...
> I'm getting ready to do a spring-over on my CJ-7. I'd like to hear
> about any lessons that you could share. I would appreciate it.
>
> Tony
>
time. Cause you're probably gonna have to have your drivshafts re-done. I
had to have both of mine re-done, and now I'm doing a tub swap with tranny
swap (TF727) and I'm afraid I might have to have my rear driveshaft
shortened about back to where it was originally because of the added length
in my new tranny.
2. You don't HAVE to buy the expensive extended braided steel brake lines.
http://www.4x4wire.com/jeep/tech/brakes/brakehoses/
3. Cheap and easy extended front shock mounts
http://www.4x4wire.com/jeep/tech/susp/cj_shock_ext/
"T" <jeep_82usa@yahoo.com> wrote in message
news:ArnPb.54192$zs4.19798@fed1read01...
> I'm getting ready to do a spring-over on my CJ-7. I'd like to hear
> about any lessons that you could share. I would appreciate it.
>
> Tony
>
Guest
Posts: n/a
Re: CJ-7 Spring Over
1. Do any other swaps (tranny, T/C, etc) that you have planned at the same
time. Cause you're probably gonna have to have your drivshafts re-done. I
had to have both of mine re-done, and now I'm doing a tub swap with tranny
swap (TF727) and I'm afraid I might have to have my rear driveshaft
shortened about back to where it was originally because of the added length
in my new tranny.
2. You don't HAVE to buy the expensive extended braided steel brake lines.
http://www.4x4wire.com/jeep/tech/brakes/brakehoses/
3. Cheap and easy extended front shock mounts
http://www.4x4wire.com/jeep/tech/susp/cj_shock_ext/
"T" <jeep_82usa@yahoo.com> wrote in message
news:ArnPb.54192$zs4.19798@fed1read01...
> I'm getting ready to do a spring-over on my CJ-7. I'd like to hear
> about any lessons that you could share. I would appreciate it.
>
> Tony
>
time. Cause you're probably gonna have to have your drivshafts re-done. I
had to have both of mine re-done, and now I'm doing a tub swap with tranny
swap (TF727) and I'm afraid I might have to have my rear driveshaft
shortened about back to where it was originally because of the added length
in my new tranny.
2. You don't HAVE to buy the expensive extended braided steel brake lines.
http://www.4x4wire.com/jeep/tech/brakes/brakehoses/
3. Cheap and easy extended front shock mounts
http://www.4x4wire.com/jeep/tech/susp/cj_shock_ext/
"T" <jeep_82usa@yahoo.com> wrote in message
news:ArnPb.54192$zs4.19798@fed1read01...
> I'm getting ready to do a spring-over on my CJ-7. I'd like to hear
> about any lessons that you could share. I would appreciate it.
>
> Tony
>
Guest
Posts: n/a
Re: CJ-7 Spring Over
1. Do any other swaps (tranny, T/C, etc) that you have planned at the same
time. Cause you're probably gonna have to have your drivshafts re-done. I
had to have both of mine re-done, and now I'm doing a tub swap with tranny
swap (TF727) and I'm afraid I might have to have my rear driveshaft
shortened about back to where it was originally because of the added length
in my new tranny.
2. You don't HAVE to buy the expensive extended braided steel brake lines.
http://www.4x4wire.com/jeep/tech/brakes/brakehoses/
3. Cheap and easy extended front shock mounts
http://www.4x4wire.com/jeep/tech/susp/cj_shock_ext/
"T" <jeep_82usa@yahoo.com> wrote in message
news:ArnPb.54192$zs4.19798@fed1read01...
> I'm getting ready to do a spring-over on my CJ-7. I'd like to hear
> about any lessons that you could share. I would appreciate it.
>
> Tony
>
time. Cause you're probably gonna have to have your drivshafts re-done. I
had to have both of mine re-done, and now I'm doing a tub swap with tranny
swap (TF727) and I'm afraid I might have to have my rear driveshaft
shortened about back to where it was originally because of the added length
in my new tranny.
2. You don't HAVE to buy the expensive extended braided steel brake lines.
http://www.4x4wire.com/jeep/tech/brakes/brakehoses/
3. Cheap and easy extended front shock mounts
http://www.4x4wire.com/jeep/tech/susp/cj_shock_ext/
"T" <jeep_82usa@yahoo.com> wrote in message
news:ArnPb.54192$zs4.19798@fed1read01...
> I'm getting ready to do a spring-over on my CJ-7. I'd like to hear
> about any lessons that you could share. I would appreciate it.
>
> Tony
>
Guest
Posts: n/a
Re: CJ-7 Spring Over
Bill, I've got REALLY stiff aftermarket springs, BDS I think, so I hope
that wrap won't be as bad as stock.
Thanks, T
L.W.(ßill) ------ III wrote:
> Hi Tony,
> Only if you can't get the height for your humongous tires any other
> way. The axles on the short leaf side will wrap likes there's no
> tomorrow, you'll need strong traction bars to keep it from bouncing like
> a TJ.
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> T wrote:
>
>>I'm getting ready to do a spring-over on my CJ-7. I'd like to hear
>>about any lessons that you could share. I would appreciate it.
>>
>>Tony
that wrap won't be as bad as stock.
Thanks, T
L.W.(ßill) ------ III wrote:
> Hi Tony,
> Only if you can't get the height for your humongous tires any other
> way. The axles on the short leaf side will wrap likes there's no
> tomorrow, you'll need strong traction bars to keep it from bouncing like
> a TJ.
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> T wrote:
>
>>I'm getting ready to do a spring-over on my CJ-7. I'd like to hear
>>about any lessons that you could share. I would appreciate it.
>>
>>Tony
Guest
Posts: n/a
Re: CJ-7 Spring Over
Bill, I've got REALLY stiff aftermarket springs, BDS I think, so I hope
that wrap won't be as bad as stock.
Thanks, T
L.W.(ßill) ------ III wrote:
> Hi Tony,
> Only if you can't get the height for your humongous tires any other
> way. The axles on the short leaf side will wrap likes there's no
> tomorrow, you'll need strong traction bars to keep it from bouncing like
> a TJ.
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> T wrote:
>
>>I'm getting ready to do a spring-over on my CJ-7. I'd like to hear
>>about any lessons that you could share. I would appreciate it.
>>
>>Tony
that wrap won't be as bad as stock.
Thanks, T
L.W.(ßill) ------ III wrote:
> Hi Tony,
> Only if you can't get the height for your humongous tires any other
> way. The axles on the short leaf side will wrap likes there's no
> tomorrow, you'll need strong traction bars to keep it from bouncing like
> a TJ.
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> T wrote:
>
>>I'm getting ready to do a spring-over on my CJ-7. I'd like to hear
>>about any lessons that you could share. I would appreciate it.
>>
>>Tony
Guest
Posts: n/a
Re: CJ-7 Spring Over
Bill, I've got REALLY stiff aftermarket springs, BDS I think, so I hope
that wrap won't be as bad as stock.
Thanks, T
L.W.(ßill) ------ III wrote:
> Hi Tony,
> Only if you can't get the height for your humongous tires any other
> way. The axles on the short leaf side will wrap likes there's no
> tomorrow, you'll need strong traction bars to keep it from bouncing like
> a TJ.
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> T wrote:
>
>>I'm getting ready to do a spring-over on my CJ-7. I'd like to hear
>>about any lessons that you could share. I would appreciate it.
>>
>>Tony
that wrap won't be as bad as stock.
Thanks, T
L.W.(ßill) ------ III wrote:
> Hi Tony,
> Only if you can't get the height for your humongous tires any other
> way. The axles on the short leaf side will wrap likes there's no
> tomorrow, you'll need strong traction bars to keep it from bouncing like
> a TJ.
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> T wrote:
>
>>I'm getting ready to do a spring-over on my CJ-7. I'd like to hear
>>about any lessons that you could share. I would appreciate it.
>>
>>Tony
Guest
Posts: n/a
Re: CJ-7 Spring Over
Great info! Thanks.
T
Kevin Sperle wrote:
> 1. Do any other swaps (tranny, T/C, etc) that you have planned at the same
> time. Cause you're probably gonna have to have your drivshafts re-done. I
> had to have both of mine re-done, and now I'm doing a tub swap with tranny
> swap (TF727) and I'm afraid I might have to have my rear driveshaft
> shortened about back to where it was originally because of the added length
> in my new tranny.
>
> 2. You don't HAVE to buy the expensive extended braided steel brake lines.
> http://www.4x4wire.com/jeep/tech/brakes/brakehoses/
>
> 3. Cheap and easy extended front shock mounts
> http://www.4x4wire.com/jeep/tech/susp/cj_shock_ext/
>
>
> "T" <jeep_82usa@yahoo.com> wrote in message
> news:ArnPb.54192$zs4.19798@fed1read01...
>
>>I'm getting ready to do a spring-over on my CJ-7. I'd like to hear
>>about any lessons that you could share. I would appreciate it.
>>
>>Tony
>>
>
>
>
T
Kevin Sperle wrote:
> 1. Do any other swaps (tranny, T/C, etc) that you have planned at the same
> time. Cause you're probably gonna have to have your drivshafts re-done. I
> had to have both of mine re-done, and now I'm doing a tub swap with tranny
> swap (TF727) and I'm afraid I might have to have my rear driveshaft
> shortened about back to where it was originally because of the added length
> in my new tranny.
>
> 2. You don't HAVE to buy the expensive extended braided steel brake lines.
> http://www.4x4wire.com/jeep/tech/brakes/brakehoses/
>
> 3. Cheap and easy extended front shock mounts
> http://www.4x4wire.com/jeep/tech/susp/cj_shock_ext/
>
>
> "T" <jeep_82usa@yahoo.com> wrote in message
> news:ArnPb.54192$zs4.19798@fed1read01...
>
>>I'm getting ready to do a spring-over on my CJ-7. I'd like to hear
>>about any lessons that you could share. I would appreciate it.
>>
>>Tony
>>
>
>
>
Guest
Posts: n/a
Re: CJ-7 Spring Over
Great info! Thanks.
T
Kevin Sperle wrote:
> 1. Do any other swaps (tranny, T/C, etc) that you have planned at the same
> time. Cause you're probably gonna have to have your drivshafts re-done. I
> had to have both of mine re-done, and now I'm doing a tub swap with tranny
> swap (TF727) and I'm afraid I might have to have my rear driveshaft
> shortened about back to where it was originally because of the added length
> in my new tranny.
>
> 2. You don't HAVE to buy the expensive extended braided steel brake lines.
> http://www.4x4wire.com/jeep/tech/brakes/brakehoses/
>
> 3. Cheap and easy extended front shock mounts
> http://www.4x4wire.com/jeep/tech/susp/cj_shock_ext/
>
>
> "T" <jeep_82usa@yahoo.com> wrote in message
> news:ArnPb.54192$zs4.19798@fed1read01...
>
>>I'm getting ready to do a spring-over on my CJ-7. I'd like to hear
>>about any lessons that you could share. I would appreciate it.
>>
>>Tony
>>
>
>
>
T
Kevin Sperle wrote:
> 1. Do any other swaps (tranny, T/C, etc) that you have planned at the same
> time. Cause you're probably gonna have to have your drivshafts re-done. I
> had to have both of mine re-done, and now I'm doing a tub swap with tranny
> swap (TF727) and I'm afraid I might have to have my rear driveshaft
> shortened about back to where it was originally because of the added length
> in my new tranny.
>
> 2. You don't HAVE to buy the expensive extended braided steel brake lines.
> http://www.4x4wire.com/jeep/tech/brakes/brakehoses/
>
> 3. Cheap and easy extended front shock mounts
> http://www.4x4wire.com/jeep/tech/susp/cj_shock_ext/
>
>
> "T" <jeep_82usa@yahoo.com> wrote in message
> news:ArnPb.54192$zs4.19798@fed1read01...
>
>>I'm getting ready to do a spring-over on my CJ-7. I'd like to hear
>>about any lessons that you could share. I would appreciate it.
>>
>>Tony
>>
>
>
>
