CJ-7 Fuel Fill hoses question
Guest
Posts: n/a
Re: CJ-7 Fuel Fill hoses question
In article <4448E134.D50E3FB@sympatico.ca>,
Mike Romain <romainm@sympatico.ca> wrote:
> That is the fill vent and the bubble tube for shutting off automatic gas
> nozzles. If you could get a copper or brass Y in at the very top of the
> filler hose it would work.
This sounds like what I'd rather do.
> You would need to be above the level the gas
> filler nozzle can reach down to so it pushes gas just down the one tube
> and lets the air back up the smaller one.
>
> Mike
I thought so, but wasn't certain. Thanks, again!
--
Member AAAAAAAA
American Association Against Acronym Abuse And Also Ambiguity.
Mike Romain <romainm@sympatico.ca> wrote:
> That is the fill vent and the bubble tube for shutting off automatic gas
> nozzles. If you could get a copper or brass Y in at the very top of the
> filler hose it would work.
This sounds like what I'd rather do.
> You would need to be above the level the gas
> filler nozzle can reach down to so it pushes gas just down the one tube
> and lets the air back up the smaller one.
>
> Mike
I thought so, but wasn't certain. Thanks, again!
--
Member AAAAAAAA
American Association Against Acronym Abuse And Also Ambiguity.
Guest
Posts: n/a
Re: CJ-7 Fuel Fill hoses question
In article <4448E134.D50E3FB@sympatico.ca>,
Mike Romain <romainm@sympatico.ca> wrote:
> That is the fill vent and the bubble tube for shutting off automatic gas
> nozzles. If you could get a copper or brass Y in at the very top of the
> filler hose it would work.
This sounds like what I'd rather do.
> You would need to be above the level the gas
> filler nozzle can reach down to so it pushes gas just down the one tube
> and lets the air back up the smaller one.
>
> Mike
I thought so, but wasn't certain. Thanks, again!
--
Member AAAAAAAA
American Association Against Acronym Abuse And Also Ambiguity.
Mike Romain <romainm@sympatico.ca> wrote:
> That is the fill vent and the bubble tube for shutting off automatic gas
> nozzles. If you could get a copper or brass Y in at the very top of the
> filler hose it would work.
This sounds like what I'd rather do.
> You would need to be above the level the gas
> filler nozzle can reach down to so it pushes gas just down the one tube
> and lets the air back up the smaller one.
>
> Mike
I thought so, but wasn't certain. Thanks, again!
--
Member AAAAAAAA
American Association Against Acronym Abuse And Also Ambiguity.
Guest
Posts: n/a
Re: CJ-7 Fuel Fill hoses question
In article <4448E134.D50E3FB@sympatico.ca>,
Mike Romain <romainm@sympatico.ca> wrote:
> That is the fill vent and the bubble tube for shutting off automatic gas
> nozzles. If you could get a copper or brass Y in at the very top of the
> filler hose it would work.
This sounds like what I'd rather do.
> You would need to be above the level the gas
> filler nozzle can reach down to so it pushes gas just down the one tube
> and lets the air back up the smaller one.
>
> Mike
I thought so, but wasn't certain. Thanks, again!
--
Member AAAAAAAA
American Association Against Acronym Abuse And Also Ambiguity.
Mike Romain <romainm@sympatico.ca> wrote:
> That is the fill vent and the bubble tube for shutting off automatic gas
> nozzles. If you could get a copper or brass Y in at the very top of the
> filler hose it would work.
This sounds like what I'd rather do.
> You would need to be above the level the gas
> filler nozzle can reach down to so it pushes gas just down the one tube
> and lets the air back up the smaller one.
>
> Mike
I thought so, but wasn't certain. Thanks, again!
--
Member AAAAAAAA
American Association Against Acronym Abuse And Also Ambiguity.
Thread
Thread Starter
Forum
Replies
Last Post
Jeep Mailing List
9
Jan 16, 2004 03:23 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
