CJ-7 Floor Pans needed .. .. ..
#1
Guest
Posts: n/a
CJ-7 Floor Pans needed .. .. ..
Subject says it all .. .. .. I'm rebuilding a CJ-7 I bought new in 1983
and it needs new glass, rubber seals, and floor pans. Who has the
heaviest and/or highest quality floor pan replacement panels out there
?? ?? ??
thanx .. .. ..
and it needs new glass, rubber seals, and floor pans. Who has the
heaviest and/or highest quality floor pan replacement panels out there
?? ?? ??
thanx .. .. ..
#2
Guest
Posts: n/a
Re: CJ-7 Floor Pans needed .. .. ..
The ones I got from JC Whitney worked well for me. They were heavier than
others I have seen, but did take a lot of reshaping to get into place. It
took me a few hours per side and a lot of pounding to get them in.
"<<<__ Bob __>>>" <b.wingard@charter.net> wrote in message
news:6U0Pf.369$Ig6.258@fe05.lga...
> Subject says it all .. .. .. I'm rebuilding a CJ-7 I bought new in 1983
> and it needs new glass, rubber seals, and floor pans. Who has the
> heaviest and/or highest quality floor pan replacement panels out there ??
> ?? ??
>
> thanx .. .. ..
others I have seen, but did take a lot of reshaping to get into place. It
took me a few hours per side and a lot of pounding to get them in.
"<<<__ Bob __>>>" <b.wingard@charter.net> wrote in message
news:6U0Pf.369$Ig6.258@fe05.lga...
> Subject says it all .. .. .. I'm rebuilding a CJ-7 I bought new in 1983
> and it needs new glass, rubber seals, and floor pans. Who has the
> heaviest and/or highest quality floor pan replacement panels out there ??
> ?? ??
>
> thanx .. .. ..
#3
Guest
Posts: n/a
Re: CJ-7 Floor Pans needed .. .. ..
The ones I got from JC Whitney worked well for me. They were heavier than
others I have seen, but did take a lot of reshaping to get into place. It
took me a few hours per side and a lot of pounding to get them in.
"<<<__ Bob __>>>" <b.wingard@charter.net> wrote in message
news:6U0Pf.369$Ig6.258@fe05.lga...
> Subject says it all .. .. .. I'm rebuilding a CJ-7 I bought new in 1983
> and it needs new glass, rubber seals, and floor pans. Who has the
> heaviest and/or highest quality floor pan replacement panels out there ??
> ?? ??
>
> thanx .. .. ..
others I have seen, but did take a lot of reshaping to get into place. It
took me a few hours per side and a lot of pounding to get them in.
"<<<__ Bob __>>>" <b.wingard@charter.net> wrote in message
news:6U0Pf.369$Ig6.258@fe05.lga...
> Subject says it all .. .. .. I'm rebuilding a CJ-7 I bought new in 1983
> and it needs new glass, rubber seals, and floor pans. Who has the
> heaviest and/or highest quality floor pan replacement panels out there ??
> ?? ??
>
> thanx .. .. ..
#4
Guest
Posts: n/a
Re: CJ-7 Floor Pans needed .. .. ..
The ones I got from JC Whitney worked well for me. They were heavier than
others I have seen, but did take a lot of reshaping to get into place. It
took me a few hours per side and a lot of pounding to get them in.
"<<<__ Bob __>>>" <b.wingard@charter.net> wrote in message
news:6U0Pf.369$Ig6.258@fe05.lga...
> Subject says it all .. .. .. I'm rebuilding a CJ-7 I bought new in 1983
> and it needs new glass, rubber seals, and floor pans. Who has the
> heaviest and/or highest quality floor pan replacement panels out there ??
> ?? ??
>
> thanx .. .. ..
others I have seen, but did take a lot of reshaping to get into place. It
took me a few hours per side and a lot of pounding to get them in.
"<<<__ Bob __>>>" <b.wingard@charter.net> wrote in message
news:6U0Pf.369$Ig6.258@fe05.lga...
> Subject says it all .. .. .. I'm rebuilding a CJ-7 I bought new in 1983
> and it needs new glass, rubber seals, and floor pans. Who has the
> heaviest and/or highest quality floor pan replacement panels out there ??
> ?? ??
>
> thanx .. .. ..
#5
Guest
Posts: n/a
Re: CJ-7 Floor Pans needed .. .. ..
The ones I got from JC Whitney worked well for me. They were heavier than
others I have seen, but did take a lot of reshaping to get into place. It
took me a few hours per side and a lot of pounding to get them in.
"<<<__ Bob __>>>" <b.wingard@charter.net> wrote in message
news:6U0Pf.369$Ig6.258@fe05.lga...
> Subject says it all .. .. .. I'm rebuilding a CJ-7 I bought new in 1983
> and it needs new glass, rubber seals, and floor pans. Who has the
> heaviest and/or highest quality floor pan replacement panels out there ??
> ?? ??
>
> thanx .. .. ..
others I have seen, but did take a lot of reshaping to get into place. It
took me a few hours per side and a lot of pounding to get them in.
"<<<__ Bob __>>>" <b.wingard@charter.net> wrote in message
news:6U0Pf.369$Ig6.258@fe05.lga...
> Subject says it all .. .. .. I'm rebuilding a CJ-7 I bought new in 1983
> and it needs new glass, rubber seals, and floor pans. Who has the
> heaviest and/or highest quality floor pan replacement panels out there ??
> ?? ??
>
> thanx .. .. ..
#6
Guest
Posts: n/a
Re: CJ-7 Floor Pans needed .. .. ..
Ditto. Heavy pans, not the greatest fit. In defense of JCW, there were a
lot of different stampings used in the stock Jeeps that were all
supposed to be the same........
Rusted wrote:
> The ones I got from JC Whitney worked well for me. They were heavier than
> others I have seen, but did take a lot of reshaping to get into place. It
> took me a few hours per side and a lot of pounding to get them in.
>
>
>
>
> "<<<__ Bob __>>>" <b.wingard@charter.net> wrote in message
> news:6U0Pf.369$Ig6.258@fe05.lga...
>
>>Subject says it all .. .. .. I'm rebuilding a CJ-7 I bought new in 1983
>>and it needs new glass, rubber seals, and floor pans. Who has the
>>heaviest and/or highest quality floor pan replacement panels out there ??
>>?? ??
>>
>>thanx .. .. ..
>
>
>
>
lot of different stampings used in the stock Jeeps that were all
supposed to be the same........
Rusted wrote:
> The ones I got from JC Whitney worked well for me. They were heavier than
> others I have seen, but did take a lot of reshaping to get into place. It
> took me a few hours per side and a lot of pounding to get them in.
>
>
>
>
> "<<<__ Bob __>>>" <b.wingard@charter.net> wrote in message
> news:6U0Pf.369$Ig6.258@fe05.lga...
>
>>Subject says it all .. .. .. I'm rebuilding a CJ-7 I bought new in 1983
>>and it needs new glass, rubber seals, and floor pans. Who has the
>>heaviest and/or highest quality floor pan replacement panels out there ??
>>?? ??
>>
>>thanx .. .. ..
>
>
>
>
#7
Guest
Posts: n/a
Re: CJ-7 Floor Pans needed .. .. ..
Ditto. Heavy pans, not the greatest fit. In defense of JCW, there were a
lot of different stampings used in the stock Jeeps that were all
supposed to be the same........
Rusted wrote:
> The ones I got from JC Whitney worked well for me. They were heavier than
> others I have seen, but did take a lot of reshaping to get into place. It
> took me a few hours per side and a lot of pounding to get them in.
>
>
>
>
> "<<<__ Bob __>>>" <b.wingard@charter.net> wrote in message
> news:6U0Pf.369$Ig6.258@fe05.lga...
>
>>Subject says it all .. .. .. I'm rebuilding a CJ-7 I bought new in 1983
>>and it needs new glass, rubber seals, and floor pans. Who has the
>>heaviest and/or highest quality floor pan replacement panels out there ??
>>?? ??
>>
>>thanx .. .. ..
>
>
>
>
lot of different stampings used in the stock Jeeps that were all
supposed to be the same........
Rusted wrote:
> The ones I got from JC Whitney worked well for me. They were heavier than
> others I have seen, but did take a lot of reshaping to get into place. It
> took me a few hours per side and a lot of pounding to get them in.
>
>
>
>
> "<<<__ Bob __>>>" <b.wingard@charter.net> wrote in message
> news:6U0Pf.369$Ig6.258@fe05.lga...
>
>>Subject says it all .. .. .. I'm rebuilding a CJ-7 I bought new in 1983
>>and it needs new glass, rubber seals, and floor pans. Who has the
>>heaviest and/or highest quality floor pan replacement panels out there ??
>>?? ??
>>
>>thanx .. .. ..
>
>
>
>
#8
Guest
Posts: n/a
Re: CJ-7 Floor Pans needed .. .. ..
Ditto. Heavy pans, not the greatest fit. In defense of JCW, there were a
lot of different stampings used in the stock Jeeps that were all
supposed to be the same........
Rusted wrote:
> The ones I got from JC Whitney worked well for me. They were heavier than
> others I have seen, but did take a lot of reshaping to get into place. It
> took me a few hours per side and a lot of pounding to get them in.
>
>
>
>
> "<<<__ Bob __>>>" <b.wingard@charter.net> wrote in message
> news:6U0Pf.369$Ig6.258@fe05.lga...
>
>>Subject says it all .. .. .. I'm rebuilding a CJ-7 I bought new in 1983
>>and it needs new glass, rubber seals, and floor pans. Who has the
>>heaviest and/or highest quality floor pan replacement panels out there ??
>>?? ??
>>
>>thanx .. .. ..
>
>
>
>
lot of different stampings used in the stock Jeeps that were all
supposed to be the same........
Rusted wrote:
> The ones I got from JC Whitney worked well for me. They were heavier than
> others I have seen, but did take a lot of reshaping to get into place. It
> took me a few hours per side and a lot of pounding to get them in.
>
>
>
>
> "<<<__ Bob __>>>" <b.wingard@charter.net> wrote in message
> news:6U0Pf.369$Ig6.258@fe05.lga...
>
>>Subject says it all .. .. .. I'm rebuilding a CJ-7 I bought new in 1983
>>and it needs new glass, rubber seals, and floor pans. Who has the
>>heaviest and/or highest quality floor pan replacement panels out there ??
>>?? ??
>>
>>thanx .. .. ..
>
>
>
>
#9
Guest
Posts: n/a
Re: CJ-7 Floor Pans needed .. .. ..
Ditto. Heavy pans, not the greatest fit. In defense of JCW, there were a
lot of different stampings used in the stock Jeeps that were all
supposed to be the same........
Rusted wrote:
> The ones I got from JC Whitney worked well for me. They were heavier than
> others I have seen, but did take a lot of reshaping to get into place. It
> took me a few hours per side and a lot of pounding to get them in.
>
>
>
>
> "<<<__ Bob __>>>" <b.wingard@charter.net> wrote in message
> news:6U0Pf.369$Ig6.258@fe05.lga...
>
>>Subject says it all .. .. .. I'm rebuilding a CJ-7 I bought new in 1983
>>and it needs new glass, rubber seals, and floor pans. Who has the
>>heaviest and/or highest quality floor pan replacement panels out there ??
>>?? ??
>>
>>thanx .. .. ..
>
>
>
>
lot of different stampings used in the stock Jeeps that were all
supposed to be the same........
Rusted wrote:
> The ones I got from JC Whitney worked well for me. They were heavier than
> others I have seen, but did take a lot of reshaping to get into place. It
> took me a few hours per side and a lot of pounding to get them in.
>
>
>
>
> "<<<__ Bob __>>>" <b.wingard@charter.net> wrote in message
> news:6U0Pf.369$Ig6.258@fe05.lga...
>
>>Subject says it all .. .. .. I'm rebuilding a CJ-7 I bought new in 1983
>>and it needs new glass, rubber seals, and floor pans. Who has the
>>heaviest and/or highest quality floor pan replacement panels out there ??
>>?? ??
>>
>>thanx .. .. ..
>
>
>
>
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)