CJ-7 Floor Pans needed .. .. ..
 

Subject says it all .. .. .. I'm rebuilding a CJ-7 I bought new in 1983
and it needs new glass, rubber seals, and floor pans. Who has the
heaviest and/or highest quality floor pan replacement panels out there
?? ?? ??

thanx .. .. ..

Re: CJ-7 Floor Pans needed .. .. ..
 

The ones I got from JC Whitney worked well for me. They were heavier than
others I have seen, but did take a lot of reshaping to get into place. It
took me a few hours per side and a lot of pounding to get them in.




"<<<__ Bob __>>>" <b.wingard@charter.net> wrote in message
news:6U0Pf.369$Ig6.258@fe05.lga...
> Subject says it all .. .. .. I'm rebuilding a CJ-7 I bought new in 1983
> and it needs new glass, rubber seals, and floor pans. Who has the
> heaviest and/or highest quality floor pan replacement panels out there ??
> ?? ??
>
> thanx .. .. ..

Re: CJ-7 Floor Pans needed .. .. ..
 

The ones I got from JC Whitney worked well for me. They were heavier than
others I have seen, but did take a lot of reshaping to get into place. It
took me a few hours per side and a lot of pounding to get them in.




"<<<__ Bob __>>>" <b.wingard@charter.net> wrote in message
news:6U0Pf.369$Ig6.258@fe05.lga...
> Subject says it all .. .. .. I'm rebuilding a CJ-7 I bought new in 1983
> and it needs new glass, rubber seals, and floor pans. Who has the
> heaviest and/or highest quality floor pan replacement panels out there ??
> ?? ??
>
> thanx .. .. ..

Re: CJ-7 Floor Pans needed .. .. ..
 

The ones I got from JC Whitney worked well for me. They were heavier than
others I have seen, but did take a lot of reshaping to get into place. It
took me a few hours per side and a lot of pounding to get them in.




"<<<__ Bob __>>>" <b.wingard@charter.net> wrote in message
news:6U0Pf.369$Ig6.258@fe05.lga...
> Subject says it all .. .. .. I'm rebuilding a CJ-7 I bought new in 1983
> and it needs new glass, rubber seals, and floor pans. Who has the
> heaviest and/or highest quality floor pan replacement panels out there ??
> ?? ??
>
> thanx .. .. ..

Re: CJ-7 Floor Pans needed .. .. ..
 

The ones I got from JC Whitney worked well for me. They were heavier than
others I have seen, but did take a lot of reshaping to get into place. It
took me a few hours per side and a lot of pounding to get them in.




"<<<__ Bob __>>>" <b.wingard@charter.net> wrote in message
news:6U0Pf.369$Ig6.258@fe05.lga...
> Subject says it all .. .. .. I'm rebuilding a CJ-7 I bought new in 1983
> and it needs new glass, rubber seals, and floor pans. Who has the
> heaviest and/or highest quality floor pan replacement panels out there ??
> ?? ??
>
> thanx .. .. ..

Re: CJ-7 Floor Pans needed .. .. ..
 

Ditto. Heavy pans, not the greatest fit. In defense of JCW, there were a
lot of different stampings used in the stock Jeeps that were all
supposed to be the same........

Rusted wrote:
> The ones I got from JC Whitney worked well for me. They were heavier than
> others I have seen, but did take a lot of reshaping to get into place. It
> took me a few hours per side and a lot of pounding to get them in.
>
>
>
>
> "<<<__ Bob __>>>" <b.wingard@charter.net> wrote in message
> news:6U0Pf.369$Ig6.258@fe05.lga...
>
>>Subject says it all .. .. .. I'm rebuilding a CJ-7 I bought new in 1983
>>and it needs new glass, rubber seals, and floor pans. Who has the
>>heaviest and/or highest quality floor pan replacement panels out there ??
>>?? ??
>>
>>thanx .. .. ..
>
>
>
>

Re: CJ-7 Floor Pans needed .. .. ..
 

Ditto. Heavy pans, not the greatest fit. In defense of JCW, there were a
lot of different stampings used in the stock Jeeps that were all
supposed to be the same........

Rusted wrote:
> The ones I got from JC Whitney worked well for me. They were heavier than
> others I have seen, but did take a lot of reshaping to get into place. It
> took me a few hours per side and a lot of pounding to get them in.
>
>
>
>
> "<<<__ Bob __>>>" <b.wingard@charter.net> wrote in message
> news:6U0Pf.369$Ig6.258@fe05.lga...
>
>>Subject says it all .. .. .. I'm rebuilding a CJ-7 I bought new in 1983
>>and it needs new glass, rubber seals, and floor pans. Who has the
>>heaviest and/or highest quality floor pan replacement panels out there ??
>>?? ??
>>
>>thanx .. .. ..
>
>
>
>

Re: CJ-7 Floor Pans needed .. .. ..
 

Ditto. Heavy pans, not the greatest fit. In defense of JCW, there were a
lot of different stampings used in the stock Jeeps that were all
supposed to be the same........

Rusted wrote:
> The ones I got from JC Whitney worked well for me. They were heavier than
> others I have seen, but did take a lot of reshaping to get into place. It
> took me a few hours per side and a lot of pounding to get them in.
>
>
>
>
> "<<<__ Bob __>>>" <b.wingard@charter.net> wrote in message
> news:6U0Pf.369$Ig6.258@fe05.lga...
>
>>Subject says it all .. .. .. I'm rebuilding a CJ-7 I bought new in 1983
>>and it needs new glass, rubber seals, and floor pans. Who has the
>>heaviest and/or highest quality floor pan replacement panels out there ??
>>?? ??
>>
>>thanx .. .. ..
>
>
>
>

Re: CJ-7 Floor Pans needed .. .. ..
 

Ditto. Heavy pans, not the greatest fit. In defense of JCW, there were a
lot of different stampings used in the stock Jeeps that were all
supposed to be the same........

Rusted wrote:
> The ones I got from JC Whitney worked well for me. They were heavier than
> others I have seen, but did take a lot of reshaping to get into place. It
> took me a few hours per side and a lot of pounding to get them in.
>
>
>
>
> "<<<__ Bob __>>>" <b.wingard@charter.net> wrote in message
> news:6U0Pf.369$Ig6.258@fe05.lga...
>
>>Subject says it all .. .. .. I'm rebuilding a CJ-7 I bought new in 1983
>>and it needs new glass, rubber seals, and floor pans. Who has the
>>heaviest and/or highest quality floor pan replacement panels out there ??
>>?? ??
>>
>>thanx .. .. ..
>
>
>
>