Chrome intake with K&N
#71
Guest
Posts: n/a
Re: Chrome intake with K&N
Many years ago when the so called oil bath high air flow filters came out
many of us who ride motorcycles switched. A very bad idea, as it is today
too much stuff gets through it does not burn and guess what, it scores the
cylinder walls causing the bike to be rebuilt way before it is time to.
Still today K&N and others sell them and still people buy them. The same
holds true for autos many manufacturers do not recommend the use of the oil
bath high flow filters. Penny wise and pound foolish and they are no
bargain.
Coasty
"L.W.(Bill) ------ III" <----------@***.net> wrote in message
news:44DE69F8.C733DFC5@***.net...
> The proofs every time you clean your filter, you will find an equal
> amount that stuck in the filter oil in side the tube, guess what didn't
> stick?
> God Bless America, Bill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> reconair wrote:
>>
>> I've always run a K&N intake on my 91 YJ -- AZ, NM, NV, UT and the
>> mid-atlantic states. I've got 255K on my Wrangler and it's still going
>> strong. Therefore, I don't much believe that the K&Ns are any less
>> capable
>> than the OEM paper filters. Proofs in the pudding.
many of us who ride motorcycles switched. A very bad idea, as it is today
too much stuff gets through it does not burn and guess what, it scores the
cylinder walls causing the bike to be rebuilt way before it is time to.
Still today K&N and others sell them and still people buy them. The same
holds true for autos many manufacturers do not recommend the use of the oil
bath high flow filters. Penny wise and pound foolish and they are no
bargain.
Coasty
"L.W.(Bill) ------ III" <----------@***.net> wrote in message
news:44DE69F8.C733DFC5@***.net...
> The proofs every time you clean your filter, you will find an equal
> amount that stuck in the filter oil in side the tube, guess what didn't
> stick?
> God Bless America, Bill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> reconair wrote:
>>
>> I've always run a K&N intake on my 91 YJ -- AZ, NM, NV, UT and the
>> mid-atlantic states. I've got 255K on my Wrangler and it's still going
>> strong. Therefore, I don't much believe that the K&Ns are any less
>> capable
>> than the OEM paper filters. Proofs in the pudding.
#72
Guest
Posts: n/a
Re: Chrome intake with K&N
Many years ago when the so called oil bath high air flow filters came out
many of us who ride motorcycles switched. A very bad idea, as it is today
too much stuff gets through it does not burn and guess what, it scores the
cylinder walls causing the bike to be rebuilt way before it is time to.
Still today K&N and others sell them and still people buy them. The same
holds true for autos many manufacturers do not recommend the use of the oil
bath high flow filters. Penny wise and pound foolish and they are no
bargain.
Coasty
"L.W.(Bill) ------ III" <----------@***.net> wrote in message
news:44DE69F8.C733DFC5@***.net...
> The proofs every time you clean your filter, you will find an equal
> amount that stuck in the filter oil in side the tube, guess what didn't
> stick?
> God Bless America, Bill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> reconair wrote:
>>
>> I've always run a K&N intake on my 91 YJ -- AZ, NM, NV, UT and the
>> mid-atlantic states. I've got 255K on my Wrangler and it's still going
>> strong. Therefore, I don't much believe that the K&Ns are any less
>> capable
>> than the OEM paper filters. Proofs in the pudding.
many of us who ride motorcycles switched. A very bad idea, as it is today
too much stuff gets through it does not burn and guess what, it scores the
cylinder walls causing the bike to be rebuilt way before it is time to.
Still today K&N and others sell them and still people buy them. The same
holds true for autos many manufacturers do not recommend the use of the oil
bath high flow filters. Penny wise and pound foolish and they are no
bargain.
Coasty
"L.W.(Bill) ------ III" <----------@***.net> wrote in message
news:44DE69F8.C733DFC5@***.net...
> The proofs every time you clean your filter, you will find an equal
> amount that stuck in the filter oil in side the tube, guess what didn't
> stick?
> God Bless America, Bill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> reconair wrote:
>>
>> I've always run a K&N intake on my 91 YJ -- AZ, NM, NV, UT and the
>> mid-atlantic states. I've got 255K on my Wrangler and it's still going
>> strong. Therefore, I don't much believe that the K&Ns are any less
>> capable
>> than the OEM paper filters. Proofs in the pudding.
#73
Guest
Posts: n/a
Re: Chrome intake with K&N
Many years ago when the so called oil bath high air flow filters came out
many of us who ride motorcycles switched. A very bad idea, as it is today
too much stuff gets through it does not burn and guess what, it scores the
cylinder walls causing the bike to be rebuilt way before it is time to.
Still today K&N and others sell them and still people buy them. The same
holds true for autos many manufacturers do not recommend the use of the oil
bath high flow filters. Penny wise and pound foolish and they are no
bargain.
Coasty
"L.W.(Bill) ------ III" <----------@***.net> wrote in message
news:44DE69F8.C733DFC5@***.net...
> The proofs every time you clean your filter, you will find an equal
> amount that stuck in the filter oil in side the tube, guess what didn't
> stick?
> God Bless America, Bill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> reconair wrote:
>>
>> I've always run a K&N intake on my 91 YJ -- AZ, NM, NV, UT and the
>> mid-atlantic states. I've got 255K on my Wrangler and it's still going
>> strong. Therefore, I don't much believe that the K&Ns are any less
>> capable
>> than the OEM paper filters. Proofs in the pudding.
many of us who ride motorcycles switched. A very bad idea, as it is today
too much stuff gets through it does not burn and guess what, it scores the
cylinder walls causing the bike to be rebuilt way before it is time to.
Still today K&N and others sell them and still people buy them. The same
holds true for autos many manufacturers do not recommend the use of the oil
bath high flow filters. Penny wise and pound foolish and they are no
bargain.
Coasty
"L.W.(Bill) ------ III" <----------@***.net> wrote in message
news:44DE69F8.C733DFC5@***.net...
> The proofs every time you clean your filter, you will find an equal
> amount that stuck in the filter oil in side the tube, guess what didn't
> stick?
> God Bless America, Bill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> reconair wrote:
>>
>> I've always run a K&N intake on my 91 YJ -- AZ, NM, NV, UT and the
>> mid-atlantic states. I've got 255K on my Wrangler and it's still going
>> strong. Therefore, I don't much believe that the K&Ns are any less
>> capable
>> than the OEM paper filters. Proofs in the pudding.
#74
Guest
Posts: n/a
Re: Chrome intake with K&N
billy ray wrote:
> Sounds like your system is still sucking in heated (engine compartment) air.
>
> There are a very small number of these K & N type systems that duct in
> outside air into the 'shielded area' but probably 99% of the setups I have
> seen the filter is still ingesting engine compartment air.
>
> The factory airbox uses a cold air intake.
>
>
>> FWIW I'm using the Jeep/MOPAR air intake on my '04 TJ six and it is
>> positioned in the right front of the engine compartment as high as the
>> original box with snorkel. The kit also includes an air dam/shield between
>> the intake and engine. It was dealer installed and at least my dealer says
>> the warranty is unaffected. They service the filter when I get my
>> scheduled service. My gas mileage ranges from 19+ to 23+ with most tanks
>> getting 20 to 21. It varies with a/c use and type of road used.
>>
>> --
>> FRH
>
>
The intake on the box that was taken off was in virtually the same
location in the engine compartment as the intake I had put on. How could
the original get air from somewhere that the new intake couldn't? There
was no "outside" intake on the original. And the original intake had no
air dam/shield between it and the engine. I'm not making any radical
claims for the setup although I am very happy with my mileage and
overall performance.
--
FRH
> Sounds like your system is still sucking in heated (engine compartment) air.
>
> There are a very small number of these K & N type systems that duct in
> outside air into the 'shielded area' but probably 99% of the setups I have
> seen the filter is still ingesting engine compartment air.
>
> The factory airbox uses a cold air intake.
>
>
>> FWIW I'm using the Jeep/MOPAR air intake on my '04 TJ six and it is
>> positioned in the right front of the engine compartment as high as the
>> original box with snorkel. The kit also includes an air dam/shield between
>> the intake and engine. It was dealer installed and at least my dealer says
>> the warranty is unaffected. They service the filter when I get my
>> scheduled service. My gas mileage ranges from 19+ to 23+ with most tanks
>> getting 20 to 21. It varies with a/c use and type of road used.
>>
>> --
>> FRH
>
>
The intake on the box that was taken off was in virtually the same
location in the engine compartment as the intake I had put on. How could
the original get air from somewhere that the new intake couldn't? There
was no "outside" intake on the original. And the original intake had no
air dam/shield between it and the engine. I'm not making any radical
claims for the setup although I am very happy with my mileage and
overall performance.
--
FRH
#75
Guest
Posts: n/a
Re: Chrome intake with K&N
billy ray wrote:
> Sounds like your system is still sucking in heated (engine compartment) air.
>
> There are a very small number of these K & N type systems that duct in
> outside air into the 'shielded area' but probably 99% of the setups I have
> seen the filter is still ingesting engine compartment air.
>
> The factory airbox uses a cold air intake.
>
>
>> FWIW I'm using the Jeep/MOPAR air intake on my '04 TJ six and it is
>> positioned in the right front of the engine compartment as high as the
>> original box with snorkel. The kit also includes an air dam/shield between
>> the intake and engine. It was dealer installed and at least my dealer says
>> the warranty is unaffected. They service the filter when I get my
>> scheduled service. My gas mileage ranges from 19+ to 23+ with most tanks
>> getting 20 to 21. It varies with a/c use and type of road used.
>>
>> --
>> FRH
>
>
The intake on the box that was taken off was in virtually the same
location in the engine compartment as the intake I had put on. How could
the original get air from somewhere that the new intake couldn't? There
was no "outside" intake on the original. And the original intake had no
air dam/shield between it and the engine. I'm not making any radical
claims for the setup although I am very happy with my mileage and
overall performance.
--
FRH
> Sounds like your system is still sucking in heated (engine compartment) air.
>
> There are a very small number of these K & N type systems that duct in
> outside air into the 'shielded area' but probably 99% of the setups I have
> seen the filter is still ingesting engine compartment air.
>
> The factory airbox uses a cold air intake.
>
>
>> FWIW I'm using the Jeep/MOPAR air intake on my '04 TJ six and it is
>> positioned in the right front of the engine compartment as high as the
>> original box with snorkel. The kit also includes an air dam/shield between
>> the intake and engine. It was dealer installed and at least my dealer says
>> the warranty is unaffected. They service the filter when I get my
>> scheduled service. My gas mileage ranges from 19+ to 23+ with most tanks
>> getting 20 to 21. It varies with a/c use and type of road used.
>>
>> --
>> FRH
>
>
The intake on the box that was taken off was in virtually the same
location in the engine compartment as the intake I had put on. How could
the original get air from somewhere that the new intake couldn't? There
was no "outside" intake on the original. And the original intake had no
air dam/shield between it and the engine. I'm not making any radical
claims for the setup although I am very happy with my mileage and
overall performance.
--
FRH
#76
Guest
Posts: n/a
Re: Chrome intake with K&N
billy ray wrote:
> Sounds like your system is still sucking in heated (engine compartment) air.
>
> There are a very small number of these K & N type systems that duct in
> outside air into the 'shielded area' but probably 99% of the setups I have
> seen the filter is still ingesting engine compartment air.
>
> The factory airbox uses a cold air intake.
>
>
>> FWIW I'm using the Jeep/MOPAR air intake on my '04 TJ six and it is
>> positioned in the right front of the engine compartment as high as the
>> original box with snorkel. The kit also includes an air dam/shield between
>> the intake and engine. It was dealer installed and at least my dealer says
>> the warranty is unaffected. They service the filter when I get my
>> scheduled service. My gas mileage ranges from 19+ to 23+ with most tanks
>> getting 20 to 21. It varies with a/c use and type of road used.
>>
>> --
>> FRH
>
>
The intake on the box that was taken off was in virtually the same
location in the engine compartment as the intake I had put on. How could
the original get air from somewhere that the new intake couldn't? There
was no "outside" intake on the original. And the original intake had no
air dam/shield between it and the engine. I'm not making any radical
claims for the setup although I am very happy with my mileage and
overall performance.
--
FRH
> Sounds like your system is still sucking in heated (engine compartment) air.
>
> There are a very small number of these K & N type systems that duct in
> outside air into the 'shielded area' but probably 99% of the setups I have
> seen the filter is still ingesting engine compartment air.
>
> The factory airbox uses a cold air intake.
>
>
>> FWIW I'm using the Jeep/MOPAR air intake on my '04 TJ six and it is
>> positioned in the right front of the engine compartment as high as the
>> original box with snorkel. The kit also includes an air dam/shield between
>> the intake and engine. It was dealer installed and at least my dealer says
>> the warranty is unaffected. They service the filter when I get my
>> scheduled service. My gas mileage ranges from 19+ to 23+ with most tanks
>> getting 20 to 21. It varies with a/c use and type of road used.
>>
>> --
>> FRH
>
>
The intake on the box that was taken off was in virtually the same
location in the engine compartment as the intake I had put on. How could
the original get air from somewhere that the new intake couldn't? There
was no "outside" intake on the original. And the original intake had no
air dam/shield between it and the engine. I'm not making any radical
claims for the setup although I am very happy with my mileage and
overall performance.
--
FRH
#77
Guest
Posts: n/a
Re: Chrome intake with K&N
billy ray wrote:
> Sounds like your system is still sucking in heated (engine compartment) air.
>
> There are a very small number of these K & N type systems that duct in
> outside air into the 'shielded area' but probably 99% of the setups I have
> seen the filter is still ingesting engine compartment air.
>
> The factory airbox uses a cold air intake.
>
>
>> FWIW I'm using the Jeep/MOPAR air intake on my '04 TJ six and it is
>> positioned in the right front of the engine compartment as high as the
>> original box with snorkel. The kit also includes an air dam/shield between
>> the intake and engine. It was dealer installed and at least my dealer says
>> the warranty is unaffected. They service the filter when I get my
>> scheduled service. My gas mileage ranges from 19+ to 23+ with most tanks
>> getting 20 to 21. It varies with a/c use and type of road used.
>>
>> --
>> FRH
>
>
The intake on the box that was taken off was in virtually the same
location in the engine compartment as the intake I had put on. How could
the original get air from somewhere that the new intake couldn't? There
was no "outside" intake on the original. And the original intake had no
air dam/shield between it and the engine. I'm not making any radical
claims for the setup although I am very happy with my mileage and
overall performance.
--
FRH
> Sounds like your system is still sucking in heated (engine compartment) air.
>
> There are a very small number of these K & N type systems that duct in
> outside air into the 'shielded area' but probably 99% of the setups I have
> seen the filter is still ingesting engine compartment air.
>
> The factory airbox uses a cold air intake.
>
>
>> FWIW I'm using the Jeep/MOPAR air intake on my '04 TJ six and it is
>> positioned in the right front of the engine compartment as high as the
>> original box with snorkel. The kit also includes an air dam/shield between
>> the intake and engine. It was dealer installed and at least my dealer says
>> the warranty is unaffected. They service the filter when I get my
>> scheduled service. My gas mileage ranges from 19+ to 23+ with most tanks
>> getting 20 to 21. It varies with a/c use and type of road used.
>>
>> --
>> FRH
>
>
The intake on the box that was taken off was in virtually the same
location in the engine compartment as the intake I had put on. How could
the original get air from somewhere that the new intake couldn't? There
was no "outside" intake on the original. And the original intake had no
air dam/shield between it and the engine. I'm not making any radical
claims for the setup although I am very happy with my mileage and
overall performance.
--
FRH
#78
Guest
Posts: n/a
Re: Chrome intake with K&N
Look again, virtually all SMOGed cars from the seventies on, have a
cold air induction. My old Bronco:
http://www.----------.com/freshair.jpg
God Bless America, Bill O|||||||O
mailto:--------------------
"Frank_v7.0" wrote:
>
> The intake on the box that was taken off was in virtually the same
> location in the engine compartment as the intake I had put on. How could
> the original get air from somewhere that the new intake couldn't? There
> was no "outside" intake on the original. And the original intake had no
> air dam/shield between it and the engine. I'm not making any radical
> claims for the setup although I am very happy with my mileage and
> overall performance.
>
> --
> FRH
cold air induction. My old Bronco:
http://www.----------.com/freshair.jpg
God Bless America, Bill O|||||||O
mailto:--------------------
"Frank_v7.0" wrote:
>
> The intake on the box that was taken off was in virtually the same
> location in the engine compartment as the intake I had put on. How could
> the original get air from somewhere that the new intake couldn't? There
> was no "outside" intake on the original. And the original intake had no
> air dam/shield between it and the engine. I'm not making any radical
> claims for the setup although I am very happy with my mileage and
> overall performance.
>
> --
> FRH
#79
Guest
Posts: n/a
Re: Chrome intake with K&N
Look again, virtually all SMOGed cars from the seventies on, have a
cold air induction. My old Bronco:
http://www.----------.com/freshair.jpg
God Bless America, Bill O|||||||O
mailto:--------------------
"Frank_v7.0" wrote:
>
> The intake on the box that was taken off was in virtually the same
> location in the engine compartment as the intake I had put on. How could
> the original get air from somewhere that the new intake couldn't? There
> was no "outside" intake on the original. And the original intake had no
> air dam/shield between it and the engine. I'm not making any radical
> claims for the setup although I am very happy with my mileage and
> overall performance.
>
> --
> FRH
cold air induction. My old Bronco:
http://www.----------.com/freshair.jpg
God Bless America, Bill O|||||||O
mailto:--------------------
"Frank_v7.0" wrote:
>
> The intake on the box that was taken off was in virtually the same
> location in the engine compartment as the intake I had put on. How could
> the original get air from somewhere that the new intake couldn't? There
> was no "outside" intake on the original. And the original intake had no
> air dam/shield between it and the engine. I'm not making any radical
> claims for the setup although I am very happy with my mileage and
> overall performance.
>
> --
> FRH
#80
Guest
Posts: n/a
Re: Chrome intake with K&N
Look again, virtually all SMOGed cars from the seventies on, have a
cold air induction. My old Bronco:
http://www.----------.com/freshair.jpg
God Bless America, Bill O|||||||O
mailto:--------------------
"Frank_v7.0" wrote:
>
> The intake on the box that was taken off was in virtually the same
> location in the engine compartment as the intake I had put on. How could
> the original get air from somewhere that the new intake couldn't? There
> was no "outside" intake on the original. And the original intake had no
> air dam/shield between it and the engine. I'm not making any radical
> claims for the setup although I am very happy with my mileage and
> overall performance.
>
> --
> FRH
cold air induction. My old Bronco:
http://www.----------.com/freshair.jpg
God Bless America, Bill O|||||||O
mailto:--------------------
"Frank_v7.0" wrote:
>
> The intake on the box that was taken off was in virtually the same
> location in the engine compartment as the intake I had put on. How could
> the original get air from somewhere that the new intake couldn't? There
> was no "outside" intake on the original. And the original intake had no
> air dam/shield between it and the engine. I'm not making any radical
> claims for the setup although I am very happy with my mileage and
> overall performance.
>
> --
> FRH