Cherokee Winches
#11
Guest
Posts: n/a
Re: Cherokee Winches
Carl
I f I remember correctly Jeep does not allow any welding of the frame
because the heat may affect the strength of the steel. Both my GC and
the Cherokee were bolt on. Just remember to use the included hardware
and check them for tightness. Draw Tite seems to be available just
about everywhere. I happened to live about 5 miles from one of their
warehouses so my auto parts store could get one the same day with no
shipping charges. I tend to try and buy local just in case and to keep
them in buisness. Of course it depends where you are located.
Regards
Howard
I f I remember correctly Jeep does not allow any welding of the frame
because the heat may affect the strength of the steel. Both my GC and
the Cherokee were bolt on. Just remember to use the included hardware
and check them for tightness. Draw Tite seems to be available just
about everywhere. I happened to live about 5 miles from one of their
warehouses so my auto parts store could get one the same day with no
shipping charges. I tend to try and buy local just in case and to keep
them in buisness. Of course it depends where you are located.
Regards
Howard
#12
Guest
Posts: n/a
Re: Cherokee Winches
Carl
I f I remember correctly Jeep does not allow any welding of the frame
because the heat may affect the strength of the steel. Both my GC and
the Cherokee were bolt on. Just remember to use the included hardware
and check them for tightness. Draw Tite seems to be available just
about everywhere. I happened to live about 5 miles from one of their
warehouses so my auto parts store could get one the same day with no
shipping charges. I tend to try and buy local just in case and to keep
them in buisness. Of course it depends where you are located.
Regards
Howard
I f I remember correctly Jeep does not allow any welding of the frame
because the heat may affect the strength of the steel. Both my GC and
the Cherokee were bolt on. Just remember to use the included hardware
and check them for tightness. Draw Tite seems to be available just
about everywhere. I happened to live about 5 miles from one of their
warehouses so my auto parts store could get one the same day with no
shipping charges. I tend to try and buy local just in case and to keep
them in buisness. Of course it depends where you are located.
Regards
Howard
#13
Guest
Posts: n/a
Re: Cherokee Winches
Carl
I f I remember correctly Jeep does not allow any welding of the frame
because the heat may affect the strength of the steel. Both my GC and
the Cherokee were bolt on. Just remember to use the included hardware
and check them for tightness. Draw Tite seems to be available just
about everywhere. I happened to live about 5 miles from one of their
warehouses so my auto parts store could get one the same day with no
shipping charges. I tend to try and buy local just in case and to keep
them in buisness. Of course it depends where you are located.
Regards
Howard
I f I remember correctly Jeep does not allow any welding of the frame
because the heat may affect the strength of the steel. Both my GC and
the Cherokee were bolt on. Just remember to use the included hardware
and check them for tightness. Draw Tite seems to be available just
about everywhere. I happened to live about 5 miles from one of their
warehouses so my auto parts store could get one the same day with no
shipping charges. I tend to try and buy local just in case and to keep
them in buisness. Of course it depends where you are located.
Regards
Howard
#14
Guest
Posts: n/a
Re: Cherokee Winches
added next, boil an additional 11 minutes.
Put the live babies into the boiling water and cover.
Boil till meat comes off easily with a fork.
Oven-Baked Baby-Back Ribs
Beef ribs or pork ribs can be used in this recipe,
and that is exactly what your dinner guests will assume!
An excellent way to expose the uninitiated to this highly misunderstood
yet succulent source of protein.
2 human baby rib racks
3 cups barbecue sauce or honey glaze (see index)
Salt
black pepper
white pepper
paprika
Remove the silverskin by loosening from the edges,
then stripping off.
Season generously, rubbing the mixture into the baby?s flesh.
Place 1 quart water in a baking pan, the meat on a wire rack.
Bake uncovered in 250° oven for 1½ hours.
When browned, remove and glaze,
return to oven and bake 20 minutes more to form a glaze.
Cut ribs into individual pieces and serve with extra sauce.
Fresh Sausage
If it becomes necessary to hide the fact that you are eating
human babies, this is the perfect solution.
But if you are still paranoid, you can substitute pork butt.
5 lb. lean chuck roast
3 lb. prime baby butt
2 tablespoons each:
salt
black, white and cayenne peppers
celery salt
garlic powder
parsley flakes
brown sugar
1 teaspoon sage
2 onions
6 cloves garlic
bunch green onions, chopped
Cut the children?s butts and the beef roast into pieces
that will fit in the grinder.
Run the meat through using a 3/16 grinding plate.
Add garlic, onions and seasoning then mix well.
Add just enough water for a smooth consistency, then mix again.
Form the sausage mixture into patties or stuff into natural casings.
Stillborn Stew
By definition, this meat cannot be had altogether fresh,
but have the lifeless unfortunate available immediately after delivery,
or use high quality beef or pork roas
Put the live babies into the boiling water and cover.
Boil till meat comes off easily with a fork.
Oven-Baked Baby-Back Ribs
Beef ribs or pork ribs can be used in this recipe,
and that is exactly what your dinner guests will assume!
An excellent way to expose the uninitiated to this highly misunderstood
yet succulent source of protein.
2 human baby rib racks
3 cups barbecue sauce or honey glaze (see index)
Salt
black pepper
white pepper
paprika
Remove the silverskin by loosening from the edges,
then stripping off.
Season generously, rubbing the mixture into the baby?s flesh.
Place 1 quart water in a baking pan, the meat on a wire rack.
Bake uncovered in 250° oven for 1½ hours.
When browned, remove and glaze,
return to oven and bake 20 minutes more to form a glaze.
Cut ribs into individual pieces and serve with extra sauce.
Fresh Sausage
If it becomes necessary to hide the fact that you are eating
human babies, this is the perfect solution.
But if you are still paranoid, you can substitute pork butt.
5 lb. lean chuck roast
3 lb. prime baby butt
2 tablespoons each:
salt
black, white and cayenne peppers
celery salt
garlic powder
parsley flakes
brown sugar
1 teaspoon sage
2 onions
6 cloves garlic
bunch green onions, chopped
Cut the children?s butts and the beef roast into pieces
that will fit in the grinder.
Run the meat through using a 3/16 grinding plate.
Add garlic, onions and seasoning then mix well.
Add just enough water for a smooth consistency, then mix again.
Form the sausage mixture into patties or stuff into natural casings.
Stillborn Stew
By definition, this meat cannot be had altogether fresh,
but have the lifeless unfortunate available immediately after delivery,
or use high quality beef or pork roas
#15
Guest
Posts: n/a
Re: Cherokee Winches
added next, boil an additional 11 minutes.
Put the live babies into the boiling water and cover.
Boil till meat comes off easily with a fork.
Oven-Baked Baby-Back Ribs
Beef ribs or pork ribs can be used in this recipe,
and that is exactly what your dinner guests will assume!
An excellent way to expose the uninitiated to this highly misunderstood
yet succulent source of protein.
2 human baby rib racks
3 cups barbecue sauce or honey glaze (see index)
Salt
black pepper
white pepper
paprika
Remove the silverskin by loosening from the edges,
then stripping off.
Season generously, rubbing the mixture into the baby?s flesh.
Place 1 quart water in a baking pan, the meat on a wire rack.
Bake uncovered in 250° oven for 1½ hours.
When browned, remove and glaze,
return to oven and bake 20 minutes more to form a glaze.
Cut ribs into individual pieces and serve with extra sauce.
Fresh Sausage
If it becomes necessary to hide the fact that you are eating
human babies, this is the perfect solution.
But if you are still paranoid, you can substitute pork butt.
5 lb. lean chuck roast
3 lb. prime baby butt
2 tablespoons each:
salt
black, white and cayenne peppers
celery salt
garlic powder
parsley flakes
brown sugar
1 teaspoon sage
2 onions
6 cloves garlic
bunch green onions, chopped
Cut the children?s butts and the beef roast into pieces
that will fit in the grinder.
Run the meat through using a 3/16 grinding plate.
Add garlic, onions and seasoning then mix well.
Add just enough water for a smooth consistency, then mix again.
Form the sausage mixture into patties or stuff into natural casings.
Stillborn Stew
By definition, this meat cannot be had altogether fresh,
but have the lifeless unfortunate available immediately after delivery,
or use high quality beef or pork roas
Put the live babies into the boiling water and cover.
Boil till meat comes off easily with a fork.
Oven-Baked Baby-Back Ribs
Beef ribs or pork ribs can be used in this recipe,
and that is exactly what your dinner guests will assume!
An excellent way to expose the uninitiated to this highly misunderstood
yet succulent source of protein.
2 human baby rib racks
3 cups barbecue sauce or honey glaze (see index)
Salt
black pepper
white pepper
paprika
Remove the silverskin by loosening from the edges,
then stripping off.
Season generously, rubbing the mixture into the baby?s flesh.
Place 1 quart water in a baking pan, the meat on a wire rack.
Bake uncovered in 250° oven for 1½ hours.
When browned, remove and glaze,
return to oven and bake 20 minutes more to form a glaze.
Cut ribs into individual pieces and serve with extra sauce.
Fresh Sausage
If it becomes necessary to hide the fact that you are eating
human babies, this is the perfect solution.
But if you are still paranoid, you can substitute pork butt.
5 lb. lean chuck roast
3 lb. prime baby butt
2 tablespoons each:
salt
black, white and cayenne peppers
celery salt
garlic powder
parsley flakes
brown sugar
1 teaspoon sage
2 onions
6 cloves garlic
bunch green onions, chopped
Cut the children?s butts and the beef roast into pieces
that will fit in the grinder.
Run the meat through using a 3/16 grinding plate.
Add garlic, onions and seasoning then mix well.
Add just enough water for a smooth consistency, then mix again.
Form the sausage mixture into patties or stuff into natural casings.
Stillborn Stew
By definition, this meat cannot be had altogether fresh,
but have the lifeless unfortunate available immediately after delivery,
or use high quality beef or pork roas
#16
Guest
Posts: n/a
Re: Cherokee Winches
added next, boil an additional 11 minutes.
Put the live babies into the boiling water and cover.
Boil till meat comes off easily with a fork.
Oven-Baked Baby-Back Ribs
Beef ribs or pork ribs can be used in this recipe,
and that is exactly what your dinner guests will assume!
An excellent way to expose the uninitiated to this highly misunderstood
yet succulent source of protein.
2 human baby rib racks
3 cups barbecue sauce or honey glaze (see index)
Salt
black pepper
white pepper
paprika
Remove the silverskin by loosening from the edges,
then stripping off.
Season generously, rubbing the mixture into the baby?s flesh.
Place 1 quart water in a baking pan, the meat on a wire rack.
Bake uncovered in 250° oven for 1½ hours.
When browned, remove and glaze,
return to oven and bake 20 minutes more to form a glaze.
Cut ribs into individual pieces and serve with extra sauce.
Fresh Sausage
If it becomes necessary to hide the fact that you are eating
human babies, this is the perfect solution.
But if you are still paranoid, you can substitute pork butt.
5 lb. lean chuck roast
3 lb. prime baby butt
2 tablespoons each:
salt
black, white and cayenne peppers
celery salt
garlic powder
parsley flakes
brown sugar
1 teaspoon sage
2 onions
6 cloves garlic
bunch green onions, chopped
Cut the children?s butts and the beef roast into pieces
that will fit in the grinder.
Run the meat through using a 3/16 grinding plate.
Add garlic, onions and seasoning then mix well.
Add just enough water for a smooth consistency, then mix again.
Form the sausage mixture into patties or stuff into natural casings.
Stillborn Stew
By definition, this meat cannot be had altogether fresh,
but have the lifeless unfortunate available immediately after delivery,
or use high quality beef or pork roas
Put the live babies into the boiling water and cover.
Boil till meat comes off easily with a fork.
Oven-Baked Baby-Back Ribs
Beef ribs or pork ribs can be used in this recipe,
and that is exactly what your dinner guests will assume!
An excellent way to expose the uninitiated to this highly misunderstood
yet succulent source of protein.
2 human baby rib racks
3 cups barbecue sauce or honey glaze (see index)
Salt
black pepper
white pepper
paprika
Remove the silverskin by loosening from the edges,
then stripping off.
Season generously, rubbing the mixture into the baby?s flesh.
Place 1 quart water in a baking pan, the meat on a wire rack.
Bake uncovered in 250° oven for 1½ hours.
When browned, remove and glaze,
return to oven and bake 20 minutes more to form a glaze.
Cut ribs into individual pieces and serve with extra sauce.
Fresh Sausage
If it becomes necessary to hide the fact that you are eating
human babies, this is the perfect solution.
But if you are still paranoid, you can substitute pork butt.
5 lb. lean chuck roast
3 lb. prime baby butt
2 tablespoons each:
salt
black, white and cayenne peppers
celery salt
garlic powder
parsley flakes
brown sugar
1 teaspoon sage
2 onions
6 cloves garlic
bunch green onions, chopped
Cut the children?s butts and the beef roast into pieces
that will fit in the grinder.
Run the meat through using a 3/16 grinding plate.
Add garlic, onions and seasoning then mix well.
Add just enough water for a smooth consistency, then mix again.
Form the sausage mixture into patties or stuff into natural casings.
Stillborn Stew
By definition, this meat cannot be had altogether fresh,
but have the lifeless unfortunate available immediately after delivery,
or use high quality beef or pork roas
#17
Guest
Posts: n/a
Re: Cherokee Winches
Howard -
This is the winch I have:
http://www.warn.com/truck/winches/src/M8274-50.shtml
Mine is the older style which has the controller plug in on the front of the
selonoid pack.
http://www.etrailer.com/Merchant2/me...egory_Code=FMH
That mounting plate doesn't look like it will accomodate my winch. I didn't
see any on the Warn site that will accomodate it either. I suppose I could
mount it with the mounts down, and just bolt the fairlead to the two holes
in the plate. but I think the winch might be too deep. I could also mount it
upright with the plate between the fairlead and the winch, but I'm concerned
about only having two bolts hold the winch down.
Ideas? Is the 8274 a decent winch?
Thanks,
Carl
"Howard" <howard@energytactics.com> wrote in message
news:1103981576.204472.91520@z14g2000cwz.googlegro ups.com...
> Carl
> I f I remember correctly Jeep does not allow any welding of the frame
> because the heat may affect the strength of the steel. Both my GC and
> the Cherokee were bolt on. Just remember to use the included hardware
> and check them for tightness. Draw Tite seems to be available just
> about everywhere. I happened to live about 5 miles from one of their
> warehouses so my auto parts store could get one the same day with no
> shipping charges. I tend to try and buy local just in case and to keep
> them in buisness. Of course it depends where you are located.
> Regards
>
> Howard
>
This is the winch I have:
http://www.warn.com/truck/winches/src/M8274-50.shtml
Mine is the older style which has the controller plug in on the front of the
selonoid pack.
http://www.etrailer.com/Merchant2/me...egory_Code=FMH
That mounting plate doesn't look like it will accomodate my winch. I didn't
see any on the Warn site that will accomodate it either. I suppose I could
mount it with the mounts down, and just bolt the fairlead to the two holes
in the plate. but I think the winch might be too deep. I could also mount it
upright with the plate between the fairlead and the winch, but I'm concerned
about only having two bolts hold the winch down.
Ideas? Is the 8274 a decent winch?
Thanks,
Carl
"Howard" <howard@energytactics.com> wrote in message
news:1103981576.204472.91520@z14g2000cwz.googlegro ups.com...
> Carl
> I f I remember correctly Jeep does not allow any welding of the frame
> because the heat may affect the strength of the steel. Both my GC and
> the Cherokee were bolt on. Just remember to use the included hardware
> and check them for tightness. Draw Tite seems to be available just
> about everywhere. I happened to live about 5 miles from one of their
> warehouses so my auto parts store could get one the same day with no
> shipping charges. I tend to try and buy local just in case and to keep
> them in buisness. Of course it depends where you are located.
> Regards
>
> Howard
>
#18
Guest
Posts: n/a
Re: Cherokee Winches
Howard -
This is the winch I have:
http://www.warn.com/truck/winches/src/M8274-50.shtml
Mine is the older style which has the controller plug in on the front of the
selonoid pack.
http://www.etrailer.com/Merchant2/me...egory_Code=FMH
That mounting plate doesn't look like it will accomodate my winch. I didn't
see any on the Warn site that will accomodate it either. I suppose I could
mount it with the mounts down, and just bolt the fairlead to the two holes
in the plate. but I think the winch might be too deep. I could also mount it
upright with the plate between the fairlead and the winch, but I'm concerned
about only having two bolts hold the winch down.
Ideas? Is the 8274 a decent winch?
Thanks,
Carl
"Howard" <howard@energytactics.com> wrote in message
news:1103981576.204472.91520@z14g2000cwz.googlegro ups.com...
> Carl
> I f I remember correctly Jeep does not allow any welding of the frame
> because the heat may affect the strength of the steel. Both my GC and
> the Cherokee were bolt on. Just remember to use the included hardware
> and check them for tightness. Draw Tite seems to be available just
> about everywhere. I happened to live about 5 miles from one of their
> warehouses so my auto parts store could get one the same day with no
> shipping charges. I tend to try and buy local just in case and to keep
> them in buisness. Of course it depends where you are located.
> Regards
>
> Howard
>
This is the winch I have:
http://www.warn.com/truck/winches/src/M8274-50.shtml
Mine is the older style which has the controller plug in on the front of the
selonoid pack.
http://www.etrailer.com/Merchant2/me...egory_Code=FMH
That mounting plate doesn't look like it will accomodate my winch. I didn't
see any on the Warn site that will accomodate it either. I suppose I could
mount it with the mounts down, and just bolt the fairlead to the two holes
in the plate. but I think the winch might be too deep. I could also mount it
upright with the plate between the fairlead and the winch, but I'm concerned
about only having two bolts hold the winch down.
Ideas? Is the 8274 a decent winch?
Thanks,
Carl
"Howard" <howard@energytactics.com> wrote in message
news:1103981576.204472.91520@z14g2000cwz.googlegro ups.com...
> Carl
> I f I remember correctly Jeep does not allow any welding of the frame
> because the heat may affect the strength of the steel. Both my GC and
> the Cherokee were bolt on. Just remember to use the included hardware
> and check them for tightness. Draw Tite seems to be available just
> about everywhere. I happened to live about 5 miles from one of their
> warehouses so my auto parts store could get one the same day with no
> shipping charges. I tend to try and buy local just in case and to keep
> them in buisness. Of course it depends where you are located.
> Regards
>
> Howard
>
#19
Guest
Posts: n/a
Re: Cherokee Winches
Howard -
This is the winch I have:
http://www.warn.com/truck/winches/src/M8274-50.shtml
Mine is the older style which has the controller plug in on the front of the
selonoid pack.
http://www.etrailer.com/Merchant2/me...egory_Code=FMH
That mounting plate doesn't look like it will accomodate my winch. I didn't
see any on the Warn site that will accomodate it either. I suppose I could
mount it with the mounts down, and just bolt the fairlead to the two holes
in the plate. but I think the winch might be too deep. I could also mount it
upright with the plate between the fairlead and the winch, but I'm concerned
about only having two bolts hold the winch down.
Ideas? Is the 8274 a decent winch?
Thanks,
Carl
"Howard" <howard@energytactics.com> wrote in message
news:1103981576.204472.91520@z14g2000cwz.googlegro ups.com...
> Carl
> I f I remember correctly Jeep does not allow any welding of the frame
> because the heat may affect the strength of the steel. Both my GC and
> the Cherokee were bolt on. Just remember to use the included hardware
> and check them for tightness. Draw Tite seems to be available just
> about everywhere. I happened to live about 5 miles from one of their
> warehouses so my auto parts store could get one the same day with no
> shipping charges. I tend to try and buy local just in case and to keep
> them in buisness. Of course it depends where you are located.
> Regards
>
> Howard
>
This is the winch I have:
http://www.warn.com/truck/winches/src/M8274-50.shtml
Mine is the older style which has the controller plug in on the front of the
selonoid pack.
http://www.etrailer.com/Merchant2/me...egory_Code=FMH
That mounting plate doesn't look like it will accomodate my winch. I didn't
see any on the Warn site that will accomodate it either. I suppose I could
mount it with the mounts down, and just bolt the fairlead to the two holes
in the plate. but I think the winch might be too deep. I could also mount it
upright with the plate between the fairlead and the winch, but I'm concerned
about only having two bolts hold the winch down.
Ideas? Is the 8274 a decent winch?
Thanks,
Carl
"Howard" <howard@energytactics.com> wrote in message
news:1103981576.204472.91520@z14g2000cwz.googlegro ups.com...
> Carl
> I f I remember correctly Jeep does not allow any welding of the frame
> because the heat may affect the strength of the steel. Both my GC and
> the Cherokee were bolt on. Just remember to use the included hardware
> and check them for tightness. Draw Tite seems to be available just
> about everywhere. I happened to live about 5 miles from one of their
> warehouses so my auto parts store could get one the same day with no
> shipping charges. I tend to try and buy local just in case and to keep
> them in buisness. Of course it depends where you are located.
> Regards
>
> Howard
>
#20
Guest
Posts: n/a
Re: Cherokee Winches
I'm not a fan of using the receiver hitch with a 8000/9000 pound winch.
Depending on the size of the steel used in the receiver cross member, it
may be strong enough to pull a 5000 pound gross weight trailer but not
strong enough to handle a straight 9000 pound winch when it stalls out.
Worse yet, very few pulls are straight line, you are likely to bend the
receiver off center on a hard pull. I've seen some home made dual
receiver mounts (Two 2" receivers about 24" apart) that are much better.
Carl Saiyed wrote:
> I'm picking up a Warn 8000 or 9000lb winch used from a friend for CHEEAAP
> today. I know it works because it was on my old truck which I sold to him.
>
> I'd like to mount it via a front reciever for now, as I like the idea of
> being able to remove the winch when I am not wheeling. I live in an urban
> area and I'm concerned the winch will be stolen.
>
> Is this the way to go?
> http://cgi.ebay.com/ebaymotors/ws/eB...category=33653
>
> What type of receiver do I need to get?
>
> Thanks,
>
> Carl
>
>
Depending on the size of the steel used in the receiver cross member, it
may be strong enough to pull a 5000 pound gross weight trailer but not
strong enough to handle a straight 9000 pound winch when it stalls out.
Worse yet, very few pulls are straight line, you are likely to bend the
receiver off center on a hard pull. I've seen some home made dual
receiver mounts (Two 2" receivers about 24" apart) that are much better.
Carl Saiyed wrote:
> I'm picking up a Warn 8000 or 9000lb winch used from a friend for CHEEAAP
> today. I know it works because it was on my old truck which I sold to him.
>
> I'd like to mount it via a front reciever for now, as I like the idea of
> being able to remove the winch when I am not wheeling. I live in an urban
> area and I'm concerned the winch will be stolen.
>
> Is this the way to go?
> http://cgi.ebay.com/ebaymotors/ws/eB...category=33653
>
> What type of receiver do I need to get?
>
> Thanks,
>
> Carl
>
>