Ok, your terms are confusing.

When you say 'axle flange' do you actually mean the lower sway bar
mounting bracket?

If so, you likely just need a bigger hammer....

Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Canadian Off Road Trips Photos: Non members can still view!
Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
(More Off Road album links at bottom of the view page)

"John W." wrote:
>
> Here's a link to the instructions for the disconnect kit that came with
> the RE lift:
>
> http://www.rubiconexpress.com/instru...tructionsC.pdf
>
> In the pic, the bolt that goes through the axle flange threads into the
> pin that the end link slips on. This is a new bolt, so that means the
> old one must come out. Wont have a chance to snap a pic of the actual
> stubborn bolt until this weekend, too cold and dark outside after work.

 

Ok, your terms are confusing.

When you say 'axle flange' do you actually mean the lower sway bar
mounting bracket?

If so, you likely just need a bigger hammer....

Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Canadian Off Road Trips Photos: Non members can still view!
Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
(More Off Road album links at bottom of the view page)

"John W." wrote:
>
> Here's a link to the instructions for the disconnect kit that came with
> the RE lift:
>
> http://www.rubiconexpress.com/instru...tructionsC.pdf
>
> In the pic, the bolt that goes through the axle flange threads into the
> pin that the end link slips on. This is a new bolt, so that means the
> old one must come out. Wont have a chance to snap a pic of the actual
> stubborn bolt until this weekend, too cold and dark outside after work.

 

Ok, your terms are confusing.

When you say 'axle flange' do you actually mean the lower sway bar
mounting bracket?

If so, you likely just need a bigger hammer....

Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Canadian Off Road Trips Photos: Non members can still view!
Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
(More Off Road album links at bottom of the view page)

"John W." wrote:
>
> Here's a link to the instructions for the disconnect kit that came with
> the RE lift:
>
> http://www.rubiconexpress.com/instru...tructionsC.pdf
>
> In the pic, the bolt that goes through the axle flange threads into the
> pin that the end link slips on. This is a new bolt, so that means the
> old one must come out. Wont have a chance to snap a pic of the actual
> stubborn bolt until this weekend, too cold and dark outside after work.

 

Or a fork.
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/

Mike Romain wrote:
>
> Ok, your terms are confusing.
>
> When you say 'axle flange' do you actually mean the lower sway bar
> mounting bracket?
>
> If so, you likely just need a bigger hammer....
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
> Canadian Off Road Trips Photos: Non members can still view!
> Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
> (More Off Road album links at bottom of the view page)

 

Or a fork.
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/

Mike Romain wrote:
>
> Ok, your terms are confusing.
>
> When you say 'axle flange' do you actually mean the lower sway bar
> mounting bracket?
>
> If so, you likely just need a bigger hammer....
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
> Canadian Off Road Trips Photos: Non members can still view!
> Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
> (More Off Road album links at bottom of the view page)

 

Or a fork.
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/

Mike Romain wrote:
>
> Ok, your terms are confusing.
>
> When you say 'axle flange' do you actually mean the lower sway bar
> mounting bracket?
>
> If so, you likely just need a bigger hammer....
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
> Canadian Off Road Trips Photos: Non members can still view!
> Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
> (More Off Road album links at bottom of the view page)