Brand new '89 YJ
#51
Guest
Posts: n/a
Re: Brand new '89 YJ
Replace the ballast resistor. ;-)
Carl
"The Merg" <greg.mergner@REMOVEgmail.com> wrote in message
news:eq64vo$c4e$2@aioe.org...
> please elaborate.
>
> Carl S wrote:
>> Ballast resistor.
>>
>> Carl
>>
>> "The Merg" <greg.mergner@REMOVEgmail.com> wrote in message
>> news:eq5fjl$tvq$1@aioe.org...
>>> Hey guys, I haven't had a chance to do much reading on the 4.2L yet, so
>>> I thought I'd ask you guys for a quick answer.
>>>
>>> We threw a battery in it, and voila, the starter does work, there's just
>>> no spark. The plugs are ugly, but would probably spark if there was any
>>> power to them. In the myriad trash that came out of this thing was a
>>> new distributor cap and rotor, so we put them on.
>>> I'm thinking it's the coil, but here's the situation: we put a timing
>>> light on the wire that runs from the coil to the cap and it doesn't have
>>> spark when the key is turned, but only when the key is released from
>>> 'start' - then it has a quick spark, but that's it.
>>> So - replace the coil? Or am I possibly looking at some ignition wiring
>>> problem?
>>> There are also a couple vacuum hoses disconnected and I'm clueless on
>>> carburetors, but that's another show.
Carl
"The Merg" <greg.mergner@REMOVEgmail.com> wrote in message
news:eq64vo$c4e$2@aioe.org...
> please elaborate.
>
> Carl S wrote:
>> Ballast resistor.
>>
>> Carl
>>
>> "The Merg" <greg.mergner@REMOVEgmail.com> wrote in message
>> news:eq5fjl$tvq$1@aioe.org...
>>> Hey guys, I haven't had a chance to do much reading on the 4.2L yet, so
>>> I thought I'd ask you guys for a quick answer.
>>>
>>> We threw a battery in it, and voila, the starter does work, there's just
>>> no spark. The plugs are ugly, but would probably spark if there was any
>>> power to them. In the myriad trash that came out of this thing was a
>>> new distributor cap and rotor, so we put them on.
>>> I'm thinking it's the coil, but here's the situation: we put a timing
>>> light on the wire that runs from the coil to the cap and it doesn't have
>>> spark when the key is turned, but only when the key is released from
>>> 'start' - then it has a quick spark, but that's it.
>>> So - replace the coil? Or am I possibly looking at some ignition wiring
>>> problem?
>>> There are also a couple vacuum hoses disconnected and I'm clueless on
>>> carburetors, but that's another show.
#52
Guest
Posts: n/a
Re: Brand new '89 YJ
Replace the ballast resistor. ;-)
Carl
"The Merg" <greg.mergner@REMOVEgmail.com> wrote in message
news:eq64vo$c4e$2@aioe.org...
> please elaborate.
>
> Carl S wrote:
>> Ballast resistor.
>>
>> Carl
>>
>> "The Merg" <greg.mergner@REMOVEgmail.com> wrote in message
>> news:eq5fjl$tvq$1@aioe.org...
>>> Hey guys, I haven't had a chance to do much reading on the 4.2L yet, so
>>> I thought I'd ask you guys for a quick answer.
>>>
>>> We threw a battery in it, and voila, the starter does work, there's just
>>> no spark. The plugs are ugly, but would probably spark if there was any
>>> power to them. In the myriad trash that came out of this thing was a
>>> new distributor cap and rotor, so we put them on.
>>> I'm thinking it's the coil, but here's the situation: we put a timing
>>> light on the wire that runs from the coil to the cap and it doesn't have
>>> spark when the key is turned, but only when the key is released from
>>> 'start' - then it has a quick spark, but that's it.
>>> So - replace the coil? Or am I possibly looking at some ignition wiring
>>> problem?
>>> There are also a couple vacuum hoses disconnected and I'm clueless on
>>> carburetors, but that's another show.
Carl
"The Merg" <greg.mergner@REMOVEgmail.com> wrote in message
news:eq64vo$c4e$2@aioe.org...
> please elaborate.
>
> Carl S wrote:
>> Ballast resistor.
>>
>> Carl
>>
>> "The Merg" <greg.mergner@REMOVEgmail.com> wrote in message
>> news:eq5fjl$tvq$1@aioe.org...
>>> Hey guys, I haven't had a chance to do much reading on the 4.2L yet, so
>>> I thought I'd ask you guys for a quick answer.
>>>
>>> We threw a battery in it, and voila, the starter does work, there's just
>>> no spark. The plugs are ugly, but would probably spark if there was any
>>> power to them. In the myriad trash that came out of this thing was a
>>> new distributor cap and rotor, so we put them on.
>>> I'm thinking it's the coil, but here's the situation: we put a timing
>>> light on the wire that runs from the coil to the cap and it doesn't have
>>> spark when the key is turned, but only when the key is released from
>>> 'start' - then it has a quick spark, but that's it.
>>> So - replace the coil? Or am I possibly looking at some ignition wiring
>>> problem?
>>> There are also a couple vacuum hoses disconnected and I'm clueless on
>>> carburetors, but that's another show.
#53
Guest
Posts: n/a
Re: Brand new '89 YJ
Replace the ballast resistor. ;-)
Carl
"The Merg" <greg.mergner@REMOVEgmail.com> wrote in message
news:eq64vo$c4e$2@aioe.org...
> please elaborate.
>
> Carl S wrote:
>> Ballast resistor.
>>
>> Carl
>>
>> "The Merg" <greg.mergner@REMOVEgmail.com> wrote in message
>> news:eq5fjl$tvq$1@aioe.org...
>>> Hey guys, I haven't had a chance to do much reading on the 4.2L yet, so
>>> I thought I'd ask you guys for a quick answer.
>>>
>>> We threw a battery in it, and voila, the starter does work, there's just
>>> no spark. The plugs are ugly, but would probably spark if there was any
>>> power to them. In the myriad trash that came out of this thing was a
>>> new distributor cap and rotor, so we put them on.
>>> I'm thinking it's the coil, but here's the situation: we put a timing
>>> light on the wire that runs from the coil to the cap and it doesn't have
>>> spark when the key is turned, but only when the key is released from
>>> 'start' - then it has a quick spark, but that's it.
>>> So - replace the coil? Or am I possibly looking at some ignition wiring
>>> problem?
>>> There are also a couple vacuum hoses disconnected and I'm clueless on
>>> carburetors, but that's another show.
Carl
"The Merg" <greg.mergner@REMOVEgmail.com> wrote in message
news:eq64vo$c4e$2@aioe.org...
> please elaborate.
>
> Carl S wrote:
>> Ballast resistor.
>>
>> Carl
>>
>> "The Merg" <greg.mergner@REMOVEgmail.com> wrote in message
>> news:eq5fjl$tvq$1@aioe.org...
>>> Hey guys, I haven't had a chance to do much reading on the 4.2L yet, so
>>> I thought I'd ask you guys for a quick answer.
>>>
>>> We threw a battery in it, and voila, the starter does work, there's just
>>> no spark. The plugs are ugly, but would probably spark if there was any
>>> power to them. In the myriad trash that came out of this thing was a
>>> new distributor cap and rotor, so we put them on.
>>> I'm thinking it's the coil, but here's the situation: we put a timing
>>> light on the wire that runs from the coil to the cap and it doesn't have
>>> spark when the key is turned, but only when the key is released from
>>> 'start' - then it has a quick spark, but that's it.
>>> So - replace the coil? Or am I possibly looking at some ignition wiring
>>> problem?
>>> There are also a couple vacuum hoses disconnected and I'm clueless on
>>> carburetors, but that's another show.
#54
Guest
Posts: n/a
Re: Brand new '89 YJ
No.
If the ballast 'wire' was bad, the engine would fire up and run as long
as the starter is turning. The engine would then die as the key goes to
run.
He has the opposite happening. He gets one spark flash as the key goes
to run which indicates a bad ballast bypass wire from the solenoid to
the coil or an ignition module issue.
He needs a multimeter or he will end up going nuts tossing parts at a
non starter.
Running a power line directly to the coil positive will sort that out fast.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Canadian Off Road Trips Photos: Non members can still view!
Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
(More Off Road album links at bottom of the view page)
Carl S wrote:
> Replace the ballast resistor. ;-)
>
> Carl
>
> "The Merg" <greg.mergner@REMOVEgmail.com> wrote in message
> news:eq64vo$c4e$2@aioe.org...
>> please elaborate.
>>
>> Carl S wrote:
>>> Ballast resistor.
>>>
>>> Carl
>>>
>>> "The Merg" <greg.mergner@REMOVEgmail.com> wrote in message
>>> news:eq5fjl$tvq$1@aioe.org...
>>>> Hey guys, I haven't had a chance to do much reading on the 4.2L yet, so
>>>> I thought I'd ask you guys for a quick answer.
>>>>
>>>> We threw a battery in it, and voila, the starter does work, there's just
>>>> no spark. The plugs are ugly, but would probably spark if there was any
>>>> power to them. In the myriad trash that came out of this thing was a
>>>> new distributor cap and rotor, so we put them on.
>>>> I'm thinking it's the coil, but here's the situation: we put a timing
>>>> light on the wire that runs from the coil to the cap and it doesn't have
>>>> spark when the key is turned, but only when the key is released from
>>>> 'start' - then it has a quick spark, but that's it.
>>>> So - replace the coil? Or am I possibly looking at some ignition wiring
>>>> problem?
>>>> There are also a couple vacuum hoses disconnected and I'm clueless on
>>>> carburetors, but that's another show.
>
>
If the ballast 'wire' was bad, the engine would fire up and run as long
as the starter is turning. The engine would then die as the key goes to
run.
He has the opposite happening. He gets one spark flash as the key goes
to run which indicates a bad ballast bypass wire from the solenoid to
the coil or an ignition module issue.
He needs a multimeter or he will end up going nuts tossing parts at a
non starter.
Running a power line directly to the coil positive will sort that out fast.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Canadian Off Road Trips Photos: Non members can still view!
Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
(More Off Road album links at bottom of the view page)
Carl S wrote:
> Replace the ballast resistor. ;-)
>
> Carl
>
> "The Merg" <greg.mergner@REMOVEgmail.com> wrote in message
> news:eq64vo$c4e$2@aioe.org...
>> please elaborate.
>>
>> Carl S wrote:
>>> Ballast resistor.
>>>
>>> Carl
>>>
>>> "The Merg" <greg.mergner@REMOVEgmail.com> wrote in message
>>> news:eq5fjl$tvq$1@aioe.org...
>>>> Hey guys, I haven't had a chance to do much reading on the 4.2L yet, so
>>>> I thought I'd ask you guys for a quick answer.
>>>>
>>>> We threw a battery in it, and voila, the starter does work, there's just
>>>> no spark. The plugs are ugly, but would probably spark if there was any
>>>> power to them. In the myriad trash that came out of this thing was a
>>>> new distributor cap and rotor, so we put them on.
>>>> I'm thinking it's the coil, but here's the situation: we put a timing
>>>> light on the wire that runs from the coil to the cap and it doesn't have
>>>> spark when the key is turned, but only when the key is released from
>>>> 'start' - then it has a quick spark, but that's it.
>>>> So - replace the coil? Or am I possibly looking at some ignition wiring
>>>> problem?
>>>> There are also a couple vacuum hoses disconnected and I'm clueless on
>>>> carburetors, but that's another show.
>
>
#55
Guest
Posts: n/a
Re: Brand new '89 YJ
No.
If the ballast 'wire' was bad, the engine would fire up and run as long
as the starter is turning. The engine would then die as the key goes to
run.
He has the opposite happening. He gets one spark flash as the key goes
to run which indicates a bad ballast bypass wire from the solenoid to
the coil or an ignition module issue.
He needs a multimeter or he will end up going nuts tossing parts at a
non starter.
Running a power line directly to the coil positive will sort that out fast.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Canadian Off Road Trips Photos: Non members can still view!
Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
(More Off Road album links at bottom of the view page)
Carl S wrote:
> Replace the ballast resistor. ;-)
>
> Carl
>
> "The Merg" <greg.mergner@REMOVEgmail.com> wrote in message
> news:eq64vo$c4e$2@aioe.org...
>> please elaborate.
>>
>> Carl S wrote:
>>> Ballast resistor.
>>>
>>> Carl
>>>
>>> "The Merg" <greg.mergner@REMOVEgmail.com> wrote in message
>>> news:eq5fjl$tvq$1@aioe.org...
>>>> Hey guys, I haven't had a chance to do much reading on the 4.2L yet, so
>>>> I thought I'd ask you guys for a quick answer.
>>>>
>>>> We threw a battery in it, and voila, the starter does work, there's just
>>>> no spark. The plugs are ugly, but would probably spark if there was any
>>>> power to them. In the myriad trash that came out of this thing was a
>>>> new distributor cap and rotor, so we put them on.
>>>> I'm thinking it's the coil, but here's the situation: we put a timing
>>>> light on the wire that runs from the coil to the cap and it doesn't have
>>>> spark when the key is turned, but only when the key is released from
>>>> 'start' - then it has a quick spark, but that's it.
>>>> So - replace the coil? Or am I possibly looking at some ignition wiring
>>>> problem?
>>>> There are also a couple vacuum hoses disconnected and I'm clueless on
>>>> carburetors, but that's another show.
>
>
If the ballast 'wire' was bad, the engine would fire up and run as long
as the starter is turning. The engine would then die as the key goes to
run.
He has the opposite happening. He gets one spark flash as the key goes
to run which indicates a bad ballast bypass wire from the solenoid to
the coil or an ignition module issue.
He needs a multimeter or he will end up going nuts tossing parts at a
non starter.
Running a power line directly to the coil positive will sort that out fast.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Canadian Off Road Trips Photos: Non members can still view!
Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
(More Off Road album links at bottom of the view page)
Carl S wrote:
> Replace the ballast resistor. ;-)
>
> Carl
>
> "The Merg" <greg.mergner@REMOVEgmail.com> wrote in message
> news:eq64vo$c4e$2@aioe.org...
>> please elaborate.
>>
>> Carl S wrote:
>>> Ballast resistor.
>>>
>>> Carl
>>>
>>> "The Merg" <greg.mergner@REMOVEgmail.com> wrote in message
>>> news:eq5fjl$tvq$1@aioe.org...
>>>> Hey guys, I haven't had a chance to do much reading on the 4.2L yet, so
>>>> I thought I'd ask you guys for a quick answer.
>>>>
>>>> We threw a battery in it, and voila, the starter does work, there's just
>>>> no spark. The plugs are ugly, but would probably spark if there was any
>>>> power to them. In the myriad trash that came out of this thing was a
>>>> new distributor cap and rotor, so we put them on.
>>>> I'm thinking it's the coil, but here's the situation: we put a timing
>>>> light on the wire that runs from the coil to the cap and it doesn't have
>>>> spark when the key is turned, but only when the key is released from
>>>> 'start' - then it has a quick spark, but that's it.
>>>> So - replace the coil? Or am I possibly looking at some ignition wiring
>>>> problem?
>>>> There are also a couple vacuum hoses disconnected and I'm clueless on
>>>> carburetors, but that's another show.
>
>
#56
Guest
Posts: n/a
Re: Brand new '89 YJ
No.
If the ballast 'wire' was bad, the engine would fire up and run as long
as the starter is turning. The engine would then die as the key goes to
run.
He has the opposite happening. He gets one spark flash as the key goes
to run which indicates a bad ballast bypass wire from the solenoid to
the coil or an ignition module issue.
He needs a multimeter or he will end up going nuts tossing parts at a
non starter.
Running a power line directly to the coil positive will sort that out fast.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Canadian Off Road Trips Photos: Non members can still view!
Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
(More Off Road album links at bottom of the view page)
Carl S wrote:
> Replace the ballast resistor. ;-)
>
> Carl
>
> "The Merg" <greg.mergner@REMOVEgmail.com> wrote in message
> news:eq64vo$c4e$2@aioe.org...
>> please elaborate.
>>
>> Carl S wrote:
>>> Ballast resistor.
>>>
>>> Carl
>>>
>>> "The Merg" <greg.mergner@REMOVEgmail.com> wrote in message
>>> news:eq5fjl$tvq$1@aioe.org...
>>>> Hey guys, I haven't had a chance to do much reading on the 4.2L yet, so
>>>> I thought I'd ask you guys for a quick answer.
>>>>
>>>> We threw a battery in it, and voila, the starter does work, there's just
>>>> no spark. The plugs are ugly, but would probably spark if there was any
>>>> power to them. In the myriad trash that came out of this thing was a
>>>> new distributor cap and rotor, so we put them on.
>>>> I'm thinking it's the coil, but here's the situation: we put a timing
>>>> light on the wire that runs from the coil to the cap and it doesn't have
>>>> spark when the key is turned, but only when the key is released from
>>>> 'start' - then it has a quick spark, but that's it.
>>>> So - replace the coil? Or am I possibly looking at some ignition wiring
>>>> problem?
>>>> There are also a couple vacuum hoses disconnected and I'm clueless on
>>>> carburetors, but that's another show.
>
>
If the ballast 'wire' was bad, the engine would fire up and run as long
as the starter is turning. The engine would then die as the key goes to
run.
He has the opposite happening. He gets one spark flash as the key goes
to run which indicates a bad ballast bypass wire from the solenoid to
the coil or an ignition module issue.
He needs a multimeter or he will end up going nuts tossing parts at a
non starter.
Running a power line directly to the coil positive will sort that out fast.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Canadian Off Road Trips Photos: Non members can still view!
Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
(More Off Road album links at bottom of the view page)
Carl S wrote:
> Replace the ballast resistor. ;-)
>
> Carl
>
> "The Merg" <greg.mergner@REMOVEgmail.com> wrote in message
> news:eq64vo$c4e$2@aioe.org...
>> please elaborate.
>>
>> Carl S wrote:
>>> Ballast resistor.
>>>
>>> Carl
>>>
>>> "The Merg" <greg.mergner@REMOVEgmail.com> wrote in message
>>> news:eq5fjl$tvq$1@aioe.org...
>>>> Hey guys, I haven't had a chance to do much reading on the 4.2L yet, so
>>>> I thought I'd ask you guys for a quick answer.
>>>>
>>>> We threw a battery in it, and voila, the starter does work, there's just
>>>> no spark. The plugs are ugly, but would probably spark if there was any
>>>> power to them. In the myriad trash that came out of this thing was a
>>>> new distributor cap and rotor, so we put them on.
>>>> I'm thinking it's the coil, but here's the situation: we put a timing
>>>> light on the wire that runs from the coil to the cap and it doesn't have
>>>> spark when the key is turned, but only when the key is released from
>>>> 'start' - then it has a quick spark, but that's it.
>>>> So - replace the coil? Or am I possibly looking at some ignition wiring
>>>> problem?
>>>> There are also a couple vacuum hoses disconnected and I'm clueless on
>>>> carburetors, but that's another show.
>
>
#57
Guest
Posts: n/a
Re: Brand new '89 YJ
No.
If the ballast 'wire' was bad, the engine would fire up and run as long
as the starter is turning. The engine would then die as the key goes to
run.
He has the opposite happening. He gets one spark flash as the key goes
to run which indicates a bad ballast bypass wire from the solenoid to
the coil or an ignition module issue.
He needs a multimeter or he will end up going nuts tossing parts at a
non starter.
Running a power line directly to the coil positive will sort that out fast.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Canadian Off Road Trips Photos: Non members can still view!
Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
(More Off Road album links at bottom of the view page)
Carl S wrote:
> Replace the ballast resistor. ;-)
>
> Carl
>
> "The Merg" <greg.mergner@REMOVEgmail.com> wrote in message
> news:eq64vo$c4e$2@aioe.org...
>> please elaborate.
>>
>> Carl S wrote:
>>> Ballast resistor.
>>>
>>> Carl
>>>
>>> "The Merg" <greg.mergner@REMOVEgmail.com> wrote in message
>>> news:eq5fjl$tvq$1@aioe.org...
>>>> Hey guys, I haven't had a chance to do much reading on the 4.2L yet, so
>>>> I thought I'd ask you guys for a quick answer.
>>>>
>>>> We threw a battery in it, and voila, the starter does work, there's just
>>>> no spark. The plugs are ugly, but would probably spark if there was any
>>>> power to them. In the myriad trash that came out of this thing was a
>>>> new distributor cap and rotor, so we put them on.
>>>> I'm thinking it's the coil, but here's the situation: we put a timing
>>>> light on the wire that runs from the coil to the cap and it doesn't have
>>>> spark when the key is turned, but only when the key is released from
>>>> 'start' - then it has a quick spark, but that's it.
>>>> So - replace the coil? Or am I possibly looking at some ignition wiring
>>>> problem?
>>>> There are also a couple vacuum hoses disconnected and I'm clueless on
>>>> carburetors, but that's another show.
>
>
If the ballast 'wire' was bad, the engine would fire up and run as long
as the starter is turning. The engine would then die as the key goes to
run.
He has the opposite happening. He gets one spark flash as the key goes
to run which indicates a bad ballast bypass wire from the solenoid to
the coil or an ignition module issue.
He needs a multimeter or he will end up going nuts tossing parts at a
non starter.
Running a power line directly to the coil positive will sort that out fast.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Canadian Off Road Trips Photos: Non members can still view!
Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
(More Off Road album links at bottom of the view page)
Carl S wrote:
> Replace the ballast resistor. ;-)
>
> Carl
>
> "The Merg" <greg.mergner@REMOVEgmail.com> wrote in message
> news:eq64vo$c4e$2@aioe.org...
>> please elaborate.
>>
>> Carl S wrote:
>>> Ballast resistor.
>>>
>>> Carl
>>>
>>> "The Merg" <greg.mergner@REMOVEgmail.com> wrote in message
>>> news:eq5fjl$tvq$1@aioe.org...
>>>> Hey guys, I haven't had a chance to do much reading on the 4.2L yet, so
>>>> I thought I'd ask you guys for a quick answer.
>>>>
>>>> We threw a battery in it, and voila, the starter does work, there's just
>>>> no spark. The plugs are ugly, but would probably spark if there was any
>>>> power to them. In the myriad trash that came out of this thing was a
>>>> new distributor cap and rotor, so we put them on.
>>>> I'm thinking it's the coil, but here's the situation: we put a timing
>>>> light on the wire that runs from the coil to the cap and it doesn't have
>>>> spark when the key is turned, but only when the key is released from
>>>> 'start' - then it has a quick spark, but that's it.
>>>> So - replace the coil? Or am I possibly looking at some ignition wiring
>>>> problem?
>>>> There are also a couple vacuum hoses disconnected and I'm clueless on
>>>> carburetors, but that's another show.
>
>
#58
Guest
Posts: n/a
Re: Brand new '89 YJ
I tried jumping directly to the coil, got nothing. I think I did it
right - it was hard to shove the cable in there, but anyway, this
indicates a bad coil then?
Mike Romain wrote:
> No.
>
> If the ballast 'wire' was bad, the engine would fire up and run as long
> as the starter is turning. The engine would then die as the key goes to
> run.
>
> He has the opposite happening. He gets one spark flash as the key goes
> to run which indicates a bad ballast bypass wire from the solenoid to
> the coil or an ignition module issue.
>
> He needs a multimeter or he will end up going nuts tossing parts at a
> non starter.
>
> Running a power line directly to the coil positive will sort that out fast.
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
> Canadian Off Road Trips Photos: Non members can still view!
> Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
> (More Off Road album links at bottom of the view page)
right - it was hard to shove the cable in there, but anyway, this
indicates a bad coil then?
Mike Romain wrote:
> No.
>
> If the ballast 'wire' was bad, the engine would fire up and run as long
> as the starter is turning. The engine would then die as the key goes to
> run.
>
> He has the opposite happening. He gets one spark flash as the key goes
> to run which indicates a bad ballast bypass wire from the solenoid to
> the coil or an ignition module issue.
>
> He needs a multimeter or he will end up going nuts tossing parts at a
> non starter.
>
> Running a power line directly to the coil positive will sort that out fast.
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
> Canadian Off Road Trips Photos: Non members can still view!
> Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
> (More Off Road album links at bottom of the view page)
#59
Guest
Posts: n/a
Re: Brand new '89 YJ
I tried jumping directly to the coil, got nothing. I think I did it
right - it was hard to shove the cable in there, but anyway, this
indicates a bad coil then?
Mike Romain wrote:
> No.
>
> If the ballast 'wire' was bad, the engine would fire up and run as long
> as the starter is turning. The engine would then die as the key goes to
> run.
>
> He has the opposite happening. He gets one spark flash as the key goes
> to run which indicates a bad ballast bypass wire from the solenoid to
> the coil or an ignition module issue.
>
> He needs a multimeter or he will end up going nuts tossing parts at a
> non starter.
>
> Running a power line directly to the coil positive will sort that out fast.
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
> Canadian Off Road Trips Photos: Non members can still view!
> Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
> (More Off Road album links at bottom of the view page)
right - it was hard to shove the cable in there, but anyway, this
indicates a bad coil then?
Mike Romain wrote:
> No.
>
> If the ballast 'wire' was bad, the engine would fire up and run as long
> as the starter is turning. The engine would then die as the key goes to
> run.
>
> He has the opposite happening. He gets one spark flash as the key goes
> to run which indicates a bad ballast bypass wire from the solenoid to
> the coil or an ignition module issue.
>
> He needs a multimeter or he will end up going nuts tossing parts at a
> non starter.
>
> Running a power line directly to the coil positive will sort that out fast.
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
> Canadian Off Road Trips Photos: Non members can still view!
> Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
> (More Off Road album links at bottom of the view page)
#60
Guest
Posts: n/a
Re: Brand new '89 YJ
I tried jumping directly to the coil, got nothing. I think I did it
right - it was hard to shove the cable in there, but anyway, this
indicates a bad coil then?
Mike Romain wrote:
> No.
>
> If the ballast 'wire' was bad, the engine would fire up and run as long
> as the starter is turning. The engine would then die as the key goes to
> run.
>
> He has the opposite happening. He gets one spark flash as the key goes
> to run which indicates a bad ballast bypass wire from the solenoid to
> the coil or an ignition module issue.
>
> He needs a multimeter or he will end up going nuts tossing parts at a
> non starter.
>
> Running a power line directly to the coil positive will sort that out fast.
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
> Canadian Off Road Trips Photos: Non members can still view!
> Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
> (More Off Road album links at bottom of the view page)
right - it was hard to shove the cable in there, but anyway, this
indicates a bad coil then?
Mike Romain wrote:
> No.
>
> If the ballast 'wire' was bad, the engine would fire up and run as long
> as the starter is turning. The engine would then die as the key goes to
> run.
>
> He has the opposite happening. He gets one spark flash as the key goes
> to run which indicates a bad ballast bypass wire from the solenoid to
> the coil or an ignition module issue.
>
> He needs a multimeter or he will end up going nuts tossing parts at a
> non starter.
>
> Running a power line directly to the coil positive will sort that out fast.
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
> Canadian Off Road Trips Photos: Non members can still view!
> Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
> (More Off Road album links at bottom of the view page)