brakes not working acting right on 1992 Jeep Wrangler 4.0
12-12-2005, 08:44 PM
#1
Guest
Posts: n/a
brakes not working acting right on 1992 Jeep Wrangler 4.0
My brakes are not "acting" right. When i press on the brakes, they
engage just fine. My problem is when I take my foot off the brakes,
the pedal does not come all the way back up. Do I need to bleed the
brakes or do i have a more serious issue? Thanks in advance.
engage just fine. My problem is when I take my foot off the brakes,
the pedal does not come all the way back up. Do I need to bleed the
brakes or do i have a more serious issue? Thanks in advance.
12-12-2005, 10:01 PM
#2
Guest
Posts: n/a
Re: brakes not working acting right on 1992 Jeep Wrangler 4.0
Do your brake lights stay on?
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/
Philippe wrote:
>
> My brakes are not "acting" right. When i press on the brakes, they
> engage just fine. My problem is when I take my foot off the brakes,
> the pedal does not come all the way back up. Do I need to bleed the
> brakes or do i have a more serious issue? Thanks in advance.
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/
Philippe wrote:
>
> My brakes are not "acting" right. When i press on the brakes, they
> engage just fine. My problem is when I take my foot off the brakes,
> the pedal does not come all the way back up. Do I need to bleed the
> brakes or do i have a more serious issue? Thanks in advance.
12-12-2005, 10:01 PM
#3
Guest
Posts: n/a
Re: brakes not working acting right on 1992 Jeep Wrangler 4.0
Do your brake lights stay on?
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/
Philippe wrote:
>
> My brakes are not "acting" right. When i press on the brakes, they
> engage just fine. My problem is when I take my foot off the brakes,
> the pedal does not come all the way back up. Do I need to bleed the
> brakes or do i have a more serious issue? Thanks in advance.
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/
Philippe wrote:
>
> My brakes are not "acting" right. When i press on the brakes, they
> engage just fine. My problem is when I take my foot off the brakes,
> the pedal does not come all the way back up. Do I need to bleed the
> brakes or do i have a more serious issue? Thanks in advance.
12-12-2005, 10:01 PM
#4
Guest
Posts: n/a
Re: brakes not working acting right on 1992 Jeep Wrangler 4.0
Do your brake lights stay on?
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/
Philippe wrote:
>
> My brakes are not "acting" right. When i press on the brakes, they
> engage just fine. My problem is when I take my foot off the brakes,
> the pedal does not come all the way back up. Do I need to bleed the
> brakes or do i have a more serious issue? Thanks in advance.
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/
Philippe wrote:
>
> My brakes are not "acting" right. When i press on the brakes, they
> engage just fine. My problem is when I take my foot off the brakes,
> the pedal does not come all the way back up. Do I need to bleed the
> brakes or do i have a more serious issue? Thanks in advance.
12-17-2005, 11:02 AM
#5
Guest
Posts: n/a
Re: brakes not working acting right on 1992 Jeep Wrangler 4.0
I have a 96 Jeep Cherokee Limited. Normally I just leave the lights on
"auto" and they go out after a minute or so. Fortunately I was still
outside when the lights went out, all except for the brake lights that is.
I checked the brake pedal and it was all the back. Not really wanting to
pull off a battery cable I went in the vehicle and pumped the brakes to see
what would happen. The lights went off. Hmmm..... So now I'm wondering what
actually causes this. Brake fluid reservoir looks full but the brake pedal
seemed a little spongy. Other than that the brakes work fine. Any
suggestions?
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:439E3992.4B9B6440@***.net...
> Do your brake lights stay on?
> God Bless America, Bill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> Philippe wrote:
> >
> > My brakes are not "acting" right. When i press on the brakes, they
> > engage just fine. My problem is when I take my foot off the brakes,
> > the pedal does not come all the way back up. Do I need to bleed the
> > brakes or do i have a more serious issue? Thanks in advance.
"auto" and they go out after a minute or so. Fortunately I was still
outside when the lights went out, all except for the brake lights that is.
I checked the brake pedal and it was all the back. Not really wanting to
pull off a battery cable I went in the vehicle and pumped the brakes to see
what would happen. The lights went off. Hmmm..... So now I'm wondering what
actually causes this. Brake fluid reservoir looks full but the brake pedal
seemed a little spongy. Other than that the brakes work fine. Any
suggestions?
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:439E3992.4B9B6440@***.net...
> Do your brake lights stay on?
> God Bless America, Bill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> Philippe wrote:
> >
> > My brakes are not "acting" right. When i press on the brakes, they
> > engage just fine. My problem is when I take my foot off the brakes,
> > the pedal does not come all the way back up. Do I need to bleed the
> > brakes or do i have a more serious issue? Thanks in advance.
12-17-2005, 11:02 AM
#6
Guest
Posts: n/a
Re: brakes not working acting right on 1992 Jeep Wrangler 4.0
I have a 96 Jeep Cherokee Limited. Normally I just leave the lights on
"auto" and they go out after a minute or so. Fortunately I was still
outside when the lights went out, all except for the brake lights that is.
I checked the brake pedal and it was all the back. Not really wanting to
pull off a battery cable I went in the vehicle and pumped the brakes to see
what would happen. The lights went off. Hmmm..... So now I'm wondering what
actually causes this. Brake fluid reservoir looks full but the brake pedal
seemed a little spongy. Other than that the brakes work fine. Any
suggestions?
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:439E3992.4B9B6440@***.net...
> Do your brake lights stay on?
> God Bless America, Bill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> Philippe wrote:
> >
> > My brakes are not "acting" right. When i press on the brakes, they
> > engage just fine. My problem is when I take my foot off the brakes,
> > the pedal does not come all the way back up. Do I need to bleed the
> > brakes or do i have a more serious issue? Thanks in advance.
"auto" and they go out after a minute or so. Fortunately I was still
outside when the lights went out, all except for the brake lights that is.
I checked the brake pedal and it was all the back. Not really wanting to
pull off a battery cable I went in the vehicle and pumped the brakes to see
what would happen. The lights went off. Hmmm..... So now I'm wondering what
actually causes this. Brake fluid reservoir looks full but the brake pedal
seemed a little spongy. Other than that the brakes work fine. Any
suggestions?
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:439E3992.4B9B6440@***.net...
> Do your brake lights stay on?
> God Bless America, Bill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> Philippe wrote:
> >
> > My brakes are not "acting" right. When i press on the brakes, they
> > engage just fine. My problem is when I take my foot off the brakes,
> > the pedal does not come all the way back up. Do I need to bleed the
> > brakes or do i have a more serious issue? Thanks in advance.
12-17-2005, 11:02 AM
#7
Guest
Posts: n/a
Re: brakes not working acting right on 1992 Jeep Wrangler 4.0
I have a 96 Jeep Cherokee Limited. Normally I just leave the lights on
"auto" and they go out after a minute or so. Fortunately I was still
outside when the lights went out, all except for the brake lights that is.
I checked the brake pedal and it was all the back. Not really wanting to
pull off a battery cable I went in the vehicle and pumped the brakes to see
what would happen. The lights went off. Hmmm..... So now I'm wondering what
actually causes this. Brake fluid reservoir looks full but the brake pedal
seemed a little spongy. Other than that the brakes work fine. Any
suggestions?
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:439E3992.4B9B6440@***.net...
> Do your brake lights stay on?
> God Bless America, Bill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> Philippe wrote:
> >
> > My brakes are not "acting" right. When i press on the brakes, they
> > engage just fine. My problem is when I take my foot off the brakes,
> > the pedal does not come all the way back up. Do I need to bleed the
> > brakes or do i have a more serious issue? Thanks in advance.
"auto" and they go out after a minute or so. Fortunately I was still
outside when the lights went out, all except for the brake lights that is.
I checked the brake pedal and it was all the back. Not really wanting to
pull off a battery cable I went in the vehicle and pumped the brakes to see
what would happen. The lights went off. Hmmm..... So now I'm wondering what
actually causes this. Brake fluid reservoir looks full but the brake pedal
seemed a little spongy. Other than that the brakes work fine. Any
suggestions?
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:439E3992.4B9B6440@***.net...
> Do your brake lights stay on?
> God Bless America, Bill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> Philippe wrote:
> >
> > My brakes are not "acting" right. When i press on the brakes, they
> > engage just fine. My problem is when I take my foot off the brakes,
> > the pedal does not come all the way back up. Do I need to bleed the
> > brakes or do i have a more serious issue? Thanks in advance.
12-17-2005, 11:41 AM
#8
Guest
Posts: n/a
Re: brakes not working acting right on 1992 Jeep Wrangler 4.0
Doug did pass the time by typing:
> I have a 96 Jeep Cherokee Limited. Normally I just leave the lights on
> "auto" and they go out after a minute or so. Fortunately I was still
> outside when the lights went out, all except for the brake lights that is.
> I checked the brake pedal and it was all the back. Not really wanting to
> pull off a battery cable I went in the vehicle and pumped the brakes to see
> what would happen. The lights went off. Hmmm..... So now I'm wondering what
> actually causes this. Brake fluid reservoir looks full but the brake pedal
> seemed a little spongy. Other than that the brakes work fine. Any
> suggestions?
Adjust the brake lamp switch.
> I have a 96 Jeep Cherokee Limited. Normally I just leave the lights on
> "auto" and they go out after a minute or so. Fortunately I was still
> outside when the lights went out, all except for the brake lights that is.
> I checked the brake pedal and it was all the back. Not really wanting to
> pull off a battery cable I went in the vehicle and pumped the brakes to see
> what would happen. The lights went off. Hmmm..... So now I'm wondering what
> actually causes this. Brake fluid reservoir looks full but the brake pedal
> seemed a little spongy. Other than that the brakes work fine. Any
> suggestions?
Adjust the brake lamp switch.
12-17-2005, 11:41 AM
#9
Guest
Posts: n/a
Re: brakes not working acting right on 1992 Jeep Wrangler 4.0
Doug did pass the time by typing:
> I have a 96 Jeep Cherokee Limited. Normally I just leave the lights on
> "auto" and they go out after a minute or so. Fortunately I was still
> outside when the lights went out, all except for the brake lights that is.
> I checked the brake pedal and it was all the back. Not really wanting to
> pull off a battery cable I went in the vehicle and pumped the brakes to see
> what would happen. The lights went off. Hmmm..... So now I'm wondering what
> actually causes this. Brake fluid reservoir looks full but the brake pedal
> seemed a little spongy. Other than that the brakes work fine. Any
> suggestions?
Adjust the brake lamp switch.
> I have a 96 Jeep Cherokee Limited. Normally I just leave the lights on
> "auto" and they go out after a minute or so. Fortunately I was still
> outside when the lights went out, all except for the brake lights that is.
> I checked the brake pedal and it was all the back. Not really wanting to
> pull off a battery cable I went in the vehicle and pumped the brakes to see
> what would happen. The lights went off. Hmmm..... So now I'm wondering what
> actually causes this. Brake fluid reservoir looks full but the brake pedal
> seemed a little spongy. Other than that the brakes work fine. Any
> suggestions?
Adjust the brake lamp switch.
12-17-2005, 11:41 AM
#10
Guest
Posts: n/a
Re: brakes not working acting right on 1992 Jeep Wrangler 4.0
Doug did pass the time by typing:
> I have a 96 Jeep Cherokee Limited. Normally I just leave the lights on
> "auto" and they go out after a minute or so. Fortunately I was still
> outside when the lights went out, all except for the brake lights that is.
> I checked the brake pedal and it was all the back. Not really wanting to
> pull off a battery cable I went in the vehicle and pumped the brakes to see
> what would happen. The lights went off. Hmmm..... So now I'm wondering what
> actually causes this. Brake fluid reservoir looks full but the brake pedal
> seemed a little spongy. Other than that the brakes work fine. Any
> suggestions?
Adjust the brake lamp switch.
> I have a 96 Jeep Cherokee Limited. Normally I just leave the lights on
> "auto" and they go out after a minute or so. Fortunately I was still
> outside when the lights went out, all except for the brake lights that is.
> I checked the brake pedal and it was all the back. Not really wanting to
> pull off a battery cable I went in the vehicle and pumped the brakes to see
> what would happen. The lights went off. Hmmm..... So now I'm wondering what
> actually causes this. Brake fluid reservoir looks full but the brake pedal
> seemed a little spongy. Other than that the brakes work fine. Any
> suggestions?
Adjust the brake lamp switch.