Brake bleeding - '96 XJ w/ ABS
Guest
Posts: n/a
Re: Brake bleeding - '96 XJ w/ ABS
Phil Boeye did pass the time by typing:
> Any special thing I should know about bleeding my ABS-equipped XJ
> ('96)? The factory manual mentions something about the scan tool. Is
> this necessary for a simple flush of the brake system via bleeder
> screws?
Nope, as long as you don't suck air into the ABS servos.
Just keep an eye on the brake fluid level.
--
DougW
> Any special thing I should know about bleeding my ABS-equipped XJ
> ('96)? The factory manual mentions something about the scan tool. Is
> this necessary for a simple flush of the brake system via bleeder
> screws?
Nope, as long as you don't suck air into the ABS servos.
Just keep an eye on the brake fluid level.
--
DougW
Guest
Posts: n/a
Re: Brake bleeding - '96 XJ w/ ABS
Phil Boeye did pass the time by typing:
> Any special thing I should know about bleeding my ABS-equipped XJ
> ('96)? The factory manual mentions something about the scan tool. Is
> this necessary for a simple flush of the brake system via bleeder
> screws?
Nope, as long as you don't suck air into the ABS servos.
Just keep an eye on the brake fluid level.
--
DougW
> Any special thing I should know about bleeding my ABS-equipped XJ
> ('96)? The factory manual mentions something about the scan tool. Is
> this necessary for a simple flush of the brake system via bleeder
> screws?
Nope, as long as you don't suck air into the ABS servos.
Just keep an eye on the brake fluid level.
--
DougW
Guest
Posts: n/a
Re: Brake bleeding - '96 XJ w/ ABS
Phil Boeye did pass the time by typing:
> Any special thing I should know about bleeding my ABS-equipped XJ
> ('96)? The factory manual mentions something about the scan tool. Is
> this necessary for a simple flush of the brake system via bleeder
> screws?
Nope, as long as you don't suck air into the ABS servos.
Just keep an eye on the brake fluid level.
--
DougW
> Any special thing I should know about bleeding my ABS-equipped XJ
> ('96)? The factory manual mentions something about the scan tool. Is
> this necessary for a simple flush of the brake system via bleeder
> screws?
Nope, as long as you don't suck air into the ABS servos.
Just keep an eye on the brake fluid level.
--
DougW
Guest
Posts: n/a
Re: Brake bleeding - '96 XJ w/ ABS
Hi Phil,
Ignition off, then depressurize the ABS accumulator. This is done
by pressing down on the brake pedal HARD, 30 times:
http://www.spanishtrailrovers.com/Te...bs_brakes.html
Then bleed normally.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Phil Boeye wrote:
>
> Any special thing I should know about bleeding my ABS-equipped XJ
> ('96)? The factory manual mentions something about the scan tool. Is
> this necessary for a simple flush of the brake system via bleeder
> screws?
Ignition off, then depressurize the ABS accumulator. This is done
by pressing down on the brake pedal HARD, 30 times:
http://www.spanishtrailrovers.com/Te...bs_brakes.html
Then bleed normally.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Phil Boeye wrote:
>
> Any special thing I should know about bleeding my ABS-equipped XJ
> ('96)? The factory manual mentions something about the scan tool. Is
> this necessary for a simple flush of the brake system via bleeder
> screws?
Guest
Posts: n/a
Re: Brake bleeding - '96 XJ w/ ABS
Hi Phil,
Ignition off, then depressurize the ABS accumulator. This is done
by pressing down on the brake pedal HARD, 30 times:
http://www.spanishtrailrovers.com/Te...bs_brakes.html
Then bleed normally.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Phil Boeye wrote:
>
> Any special thing I should know about bleeding my ABS-equipped XJ
> ('96)? The factory manual mentions something about the scan tool. Is
> this necessary for a simple flush of the brake system via bleeder
> screws?
Ignition off, then depressurize the ABS accumulator. This is done
by pressing down on the brake pedal HARD, 30 times:
http://www.spanishtrailrovers.com/Te...bs_brakes.html
Then bleed normally.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Phil Boeye wrote:
>
> Any special thing I should know about bleeding my ABS-equipped XJ
> ('96)? The factory manual mentions something about the scan tool. Is
> this necessary for a simple flush of the brake system via bleeder
> screws?
Guest
Posts: n/a
Re: Brake bleeding - '96 XJ w/ ABS
Hi Phil,
Ignition off, then depressurize the ABS accumulator. This is done
by pressing down on the brake pedal HARD, 30 times:
http://www.spanishtrailrovers.com/Te...bs_brakes.html
Then bleed normally.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Phil Boeye wrote:
>
> Any special thing I should know about bleeding my ABS-equipped XJ
> ('96)? The factory manual mentions something about the scan tool. Is
> this necessary for a simple flush of the brake system via bleeder
> screws?
Ignition off, then depressurize the ABS accumulator. This is done
by pressing down on the brake pedal HARD, 30 times:
http://www.spanishtrailrovers.com/Te...bs_brakes.html
Then bleed normally.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Phil Boeye wrote:
>
> Any special thing I should know about bleeding my ABS-equipped XJ
> ('96)? The factory manual mentions something about the scan tool. Is
> this necessary for a simple flush of the brake system via bleeder
> screws?
Guest
Posts: n/a
Re: Brake bleeding - '96 XJ w/ ABS
On 13 Dec 2003 03:41 PM, Phil Boeye posted the following:
> Any special thing I should know about bleeding my ABS-equipped XJ
> ('96)? The factory manual mentions something about the scan tool. Is
> this necessary for a simple flush of the brake system via bleeder
> screws?
Definitely follow the bleeding procedure in the manual. Many ABS
equipped vehicles require a different bleeding sequence than non ABS
rigs.
----------------------------------------------------
Del Rawlins- del@_kills_spammers_rawlinsbrothers.org
Remove _kills_spammers_ to reply via email.
Unofficial Bearhawk FAQ website:
http://www.rawlinsbrothers.org/bhfaq/
> Any special thing I should know about bleeding my ABS-equipped XJ
> ('96)? The factory manual mentions something about the scan tool. Is
> this necessary for a simple flush of the brake system via bleeder
> screws?
Definitely follow the bleeding procedure in the manual. Many ABS
equipped vehicles require a different bleeding sequence than non ABS
rigs.
----------------------------------------------------
Del Rawlins- del@_kills_spammers_rawlinsbrothers.org
Remove _kills_spammers_ to reply via email.
Unofficial Bearhawk FAQ website:
http://www.rawlinsbrothers.org/bhfaq/
Guest
Posts: n/a
Re: Brake bleeding - '96 XJ w/ ABS
On 13 Dec 2003 03:41 PM, Phil Boeye posted the following:
> Any special thing I should know about bleeding my ABS-equipped XJ
> ('96)? The factory manual mentions something about the scan tool. Is
> this necessary for a simple flush of the brake system via bleeder
> screws?
Definitely follow the bleeding procedure in the manual. Many ABS
equipped vehicles require a different bleeding sequence than non ABS
rigs.
----------------------------------------------------
Del Rawlins- del@_kills_spammers_rawlinsbrothers.org
Remove _kills_spammers_ to reply via email.
Unofficial Bearhawk FAQ website:
http://www.rawlinsbrothers.org/bhfaq/
> Any special thing I should know about bleeding my ABS-equipped XJ
> ('96)? The factory manual mentions something about the scan tool. Is
> this necessary for a simple flush of the brake system via bleeder
> screws?
Definitely follow the bleeding procedure in the manual. Many ABS
equipped vehicles require a different bleeding sequence than non ABS
rigs.
----------------------------------------------------
Del Rawlins- del@_kills_spammers_rawlinsbrothers.org
Remove _kills_spammers_ to reply via email.
Unofficial Bearhawk FAQ website:
http://www.rawlinsbrothers.org/bhfaq/
Guest
Posts: n/a
Re: Brake bleeding - '96 XJ w/ ABS
On 13 Dec 2003 03:41 PM, Phil Boeye posted the following:
> Any special thing I should know about bleeding my ABS-equipped XJ
> ('96)? The factory manual mentions something about the scan tool. Is
> this necessary for a simple flush of the brake system via bleeder
> screws?
Definitely follow the bleeding procedure in the manual. Many ABS
equipped vehicles require a different bleeding sequence than non ABS
rigs.
----------------------------------------------------
Del Rawlins- del@_kills_spammers_rawlinsbrothers.org
Remove _kills_spammers_ to reply via email.
Unofficial Bearhawk FAQ website:
http://www.rawlinsbrothers.org/bhfaq/
> Any special thing I should know about bleeding my ABS-equipped XJ
> ('96)? The factory manual mentions something about the scan tool. Is
> this necessary for a simple flush of the brake system via bleeder
> screws?
Definitely follow the bleeding procedure in the manual. Many ABS
equipped vehicles require a different bleeding sequence than non ABS
rigs.
----------------------------------------------------
Del Rawlins- del@_kills_spammers_rawlinsbrothers.org
Remove _kills_spammers_ to reply via email.
Unofficial Bearhawk FAQ website:
http://www.rawlinsbrothers.org/bhfaq/
