Body lift question
11-26-2003, 06:58 PM
#31
Guest
Posts: n/a
Re: Body lift question
It's call rubber lube, and that's exactly what it's supposed to do,
squeak until the customer bring it in for a lubrication, then it goes
off again in about two months.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Lon Stowell wrote:
>
> Speaking of which, anyone know of a good safe lubricant for?
>
> Shock absorber bushings are squeaking, and it is bothering
> the mouse.
>
> --
> Still a Raiders fan, but no longer sure why.
squeak until the customer bring it in for a lubrication, then it goes
off again in about two months.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Lon Stowell wrote:
>
> Speaking of which, anyone know of a good safe lubricant for?
>
> Shock absorber bushings are squeaking, and it is bothering
> the mouse.
>
> --
> Still a Raiders fan, but no longer sure why.
11-26-2003, 07:08 PM
#32
Guest
Posts: n/a
Re: Body lift question
Approximately 11/26/03 15:58, L.W.(ßill) ------ III uttered for posterity:
> It's call rubber lube, and that's exactly what it's supposed to do,
> squeak until the customer bring it in for a lubrication, then it goes
> off again in about two months.
Pretty much the schedule. However, the real question was for
polyurethane shock mounts. Whether or not a rubber lube or
silicon spray would hurt or even work worth a darn. Perhaps
graphite or moly powder if I could figure out how to get the
powder into the joint without pulling them off and remounting.
--
Still a Raiders fan, but no longer sure why.
> It's call rubber lube, and that's exactly what it's supposed to do,
> squeak until the customer bring it in for a lubrication, then it goes
> off again in about two months.
Pretty much the schedule. However, the real question was for
polyurethane shock mounts. Whether or not a rubber lube or
silicon spray would hurt or even work worth a darn. Perhaps
graphite or moly powder if I could figure out how to get the
powder into the joint without pulling them off and remounting.
--
Still a Raiders fan, but no longer sure why.
11-26-2003, 07:08 PM
#33
Guest
Posts: n/a
Re: Body lift question
Approximately 11/26/03 15:58, L.W.(ßill) ------ III uttered for posterity:
> It's call rubber lube, and that's exactly what it's supposed to do,
> squeak until the customer bring it in for a lubrication, then it goes
> off again in about two months.
Pretty much the schedule. However, the real question was for
polyurethane shock mounts. Whether or not a rubber lube or
silicon spray would hurt or even work worth a darn. Perhaps
graphite or moly powder if I could figure out how to get the
powder into the joint without pulling them off and remounting.
--
Still a Raiders fan, but no longer sure why.
> It's call rubber lube, and that's exactly what it's supposed to do,
> squeak until the customer bring it in for a lubrication, then it goes
> off again in about two months.
Pretty much the schedule. However, the real question was for
polyurethane shock mounts. Whether or not a rubber lube or
silicon spray would hurt or even work worth a darn. Perhaps
graphite or moly powder if I could figure out how to get the
powder into the joint without pulling them off and remounting.
--
Still a Raiders fan, but no longer sure why.
11-26-2003, 07:08 PM
#34
Guest
Posts: n/a
Re: Body lift question
Approximately 11/26/03 15:58, L.W.(ßill) ------ III uttered for posterity:
> It's call rubber lube, and that's exactly what it's supposed to do,
> squeak until the customer bring it in for a lubrication, then it goes
> off again in about two months.
Pretty much the schedule. However, the real question was for
polyurethane shock mounts. Whether or not a rubber lube or
silicon spray would hurt or even work worth a darn. Perhaps
graphite or moly powder if I could figure out how to get the
powder into the joint without pulling them off and remounting.
--
Still a Raiders fan, but no longer sure why.
> It's call rubber lube, and that's exactly what it's supposed to do,
> squeak until the customer bring it in for a lubrication, then it goes
> off again in about two months.
Pretty much the schedule. However, the real question was for
polyurethane shock mounts. Whether or not a rubber lube or
silicon spray would hurt or even work worth a darn. Perhaps
graphite or moly powder if I could figure out how to get the
powder into the joint without pulling them off and remounting.
--
Still a Raiders fan, but no longer sure why.
11-26-2003, 07:11 PM
#35
Guest
Posts: n/a
Re: Body lift question
Someone put them together dry, you're supposed to pack them in
chassis grease.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Lon Stowell wrote:
>
> Pretty much the schedule. However, the real question was for
> polyurethane shock mounts. Whether or not a rubber lube or
> silicon spray would hurt or even work worth a darn. Perhaps
> graphite or moly powder if I could figure out how to get the
> powder into the joint without pulling them off and remounting.
>
> --
> Still a Raiders fan, but no longer sure why.
chassis grease.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Lon Stowell wrote:
>
> Pretty much the schedule. However, the real question was for
> polyurethane shock mounts. Whether or not a rubber lube or
> silicon spray would hurt or even work worth a darn. Perhaps
> graphite or moly powder if I could figure out how to get the
> powder into the joint without pulling them off and remounting.
>
> --
> Still a Raiders fan, but no longer sure why.
11-26-2003, 07:11 PM
#36
Guest
Posts: n/a
Re: Body lift question
Someone put them together dry, you're supposed to pack them in
chassis grease.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Lon Stowell wrote:
>
> Pretty much the schedule. However, the real question was for
> polyurethane shock mounts. Whether or not a rubber lube or
> silicon spray would hurt or even work worth a darn. Perhaps
> graphite or moly powder if I could figure out how to get the
> powder into the joint without pulling them off and remounting.
>
> --
> Still a Raiders fan, but no longer sure why.
chassis grease.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Lon Stowell wrote:
>
> Pretty much the schedule. However, the real question was for
> polyurethane shock mounts. Whether or not a rubber lube or
> silicon spray would hurt or even work worth a darn. Perhaps
> graphite or moly powder if I could figure out how to get the
> powder into the joint without pulling them off and remounting.
>
> --
> Still a Raiders fan, but no longer sure why.
11-26-2003, 07:11 PM
#37
Guest
Posts: n/a
Re: Body lift question
Someone put them together dry, you're supposed to pack them in
chassis grease.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Lon Stowell wrote:
>
> Pretty much the schedule. However, the real question was for
> polyurethane shock mounts. Whether or not a rubber lube or
> silicon spray would hurt or even work worth a darn. Perhaps
> graphite or moly powder if I could figure out how to get the
> powder into the joint without pulling them off and remounting.
>
> --
> Still a Raiders fan, but no longer sure why.
chassis grease.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Lon Stowell wrote:
>
> Pretty much the schedule. However, the real question was for
> polyurethane shock mounts. Whether or not a rubber lube or
> silicon spray would hurt or even work worth a darn. Perhaps
> graphite or moly powder if I could figure out how to get the
> powder into the joint without pulling them off and remounting.
>
> --
> Still a Raiders fan, but no longer sure why.
11-26-2003, 07:26 PM
#38
Guest
Posts: n/a
Re: Body lift question
Lon Stowell wrote:
>
> Approximately 11/26/03 15:58, L.W.(ßill) ------ III uttered for posterity:
>
> > It's call rubber lube, and that's exactly what it's supposed to do,
> > squeak until the customer bring it in for a lubrication, then it goes
> > off again in about two months.
>
> Pretty much the schedule. However, the real question was for
> polyurethane shock mounts. Whether or not a rubber lube or
> silicon spray would hurt or even work worth a darn. Perhaps
> graphite or moly powder if I could figure out how to get the
> powder into the joint without pulling them off and remounting.
>
> --
You have poly shock bushings?
The silicone spray will still work great. WD40 will even work for a
while, but it wears out fast, the silicone seems to stick around for a
season.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
>
> Approximately 11/26/03 15:58, L.W.(ßill) ------ III uttered for posterity:
>
> > It's call rubber lube, and that's exactly what it's supposed to do,
> > squeak until the customer bring it in for a lubrication, then it goes
> > off again in about two months.
>
> Pretty much the schedule. However, the real question was for
> polyurethane shock mounts. Whether or not a rubber lube or
> silicon spray would hurt or even work worth a darn. Perhaps
> graphite or moly powder if I could figure out how to get the
> powder into the joint without pulling them off and remounting.
>
> --
You have poly shock bushings?
The silicone spray will still work great. WD40 will even work for a
while, but it wears out fast, the silicone seems to stick around for a
season.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
11-26-2003, 07:26 PM
#39
Guest
Posts: n/a
Re: Body lift question
Lon Stowell wrote:
>
> Approximately 11/26/03 15:58, L.W.(ßill) ------ III uttered for posterity:
>
> > It's call rubber lube, and that's exactly what it's supposed to do,
> > squeak until the customer bring it in for a lubrication, then it goes
> > off again in about two months.
>
> Pretty much the schedule. However, the real question was for
> polyurethane shock mounts. Whether or not a rubber lube or
> silicon spray would hurt or even work worth a darn. Perhaps
> graphite or moly powder if I could figure out how to get the
> powder into the joint without pulling them off and remounting.
>
> --
You have poly shock bushings?
The silicone spray will still work great. WD40 will even work for a
while, but it wears out fast, the silicone seems to stick around for a
season.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
>
> Approximately 11/26/03 15:58, L.W.(ßill) ------ III uttered for posterity:
>
> > It's call rubber lube, and that's exactly what it's supposed to do,
> > squeak until the customer bring it in for a lubrication, then it goes
> > off again in about two months.
>
> Pretty much the schedule. However, the real question was for
> polyurethane shock mounts. Whether or not a rubber lube or
> silicon spray would hurt or even work worth a darn. Perhaps
> graphite or moly powder if I could figure out how to get the
> powder into the joint without pulling them off and remounting.
>
> --
You have poly shock bushings?
The silicone spray will still work great. WD40 will even work for a
while, but it wears out fast, the silicone seems to stick around for a
season.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
11-26-2003, 07:26 PM
#40
Guest
Posts: n/a
Re: Body lift question
Lon Stowell wrote:
>
> Approximately 11/26/03 15:58, L.W.(ßill) ------ III uttered for posterity:
>
> > It's call rubber lube, and that's exactly what it's supposed to do,
> > squeak until the customer bring it in for a lubrication, then it goes
> > off again in about two months.
>
> Pretty much the schedule. However, the real question was for
> polyurethane shock mounts. Whether or not a rubber lube or
> silicon spray would hurt or even work worth a darn. Perhaps
> graphite or moly powder if I could figure out how to get the
> powder into the joint without pulling them off and remounting.
>
> --
You have poly shock bushings?
The silicone spray will still work great. WD40 will even work for a
while, but it wears out fast, the silicone seems to stick around for a
season.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
>
> Approximately 11/26/03 15:58, L.W.(ßill) ------ III uttered for posterity:
>
> > It's call rubber lube, and that's exactly what it's supposed to do,
> > squeak until the customer bring it in for a lubrication, then it goes
> > off again in about two months.
>
> Pretty much the schedule. However, the real question was for
> polyurethane shock mounts. Whether or not a rubber lube or
> silicon spray would hurt or even work worth a darn. Perhaps
> graphite or moly powder if I could figure out how to get the
> powder into the joint without pulling them off and remounting.
>
> --
You have poly shock bushings?
The silicone spray will still work great. WD40 will even work for a
while, but it wears out fast, the silicone seems to stick around for a
season.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's